Tender For Special Repair To Boundary Wall With Swan Neck Barbed Wire Fencing At M H Jrc Under Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_796273_1)
Tender Value
36 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
20 days left
EMD
72012
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Boundary Wall With Swan Neck Barbed Wire Fencing At M H Jrc Under Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_796273_1)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc of any description, complete all asdirected by Engr-in-charge. |
| 2 | M&L for Brick work with sub class ‘B’ brick, straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 , complete all as specified and as directed. |
| 3 | Ditto all as per tiem No. 2.00 above, but except bricks, complete all as specified and as directed. |
| 4 | Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all asdirected by Engr-in-charge. |
| 5 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc., complete all as specified and as directed. |
| 7 | M&L 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement , complete all as specified and as directed. |
| 8 | M&L for preparing new plastered or unplasterd wall surfaces and applied two coats of cement base paint over one prime, complete all as specified and as directed. |
| 9 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping, bed block or similar work including necessary form work, complete all as specified and as directed. |
| 10 | Dismantling posts or struts (steel or R.C.C.) any section, embeded in concrete, including taking out embedded portion and making good disturbed ground and preparing post holes for providing new posts, complete all asdirected by Engr-in-charge. |
| 11 | M&L for M S work for posts and struts in fencing made fron angle iron and flat iron including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 12 | M&L for PCC 1:3: 6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed. |
| 13 | M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide prime, complete all as specified and as directed. |
| 14 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured), complete all as specified and as directed.. |
| 15 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil, complete all asdirected by Engr-in-charge. |
| 16 | Removing excavated material n. exc 50 mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point, complete all asdirected by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender