Tender For Maintenance Of Water Supply Installations, Stp And Repair/Replacement Of Water Supply Pipe Line And Its Connected Items At Sess Palayamkottai Under Ge Tirunelveli (Tender Id:2026_Mes_796629_1)
Tender Value
25.60 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
20 days left
EMD
51200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Water Supply Installations, Stp And Repair/Replacement Of Water Supply Pipe Line And Its Connected Items At Sess Palayamkottai Under Ge Tirunelveli (Tender Id:2026_Mes_796629_1)
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for taking up submersible pump set 7.5 HP 3-phase 415v,50Hz from Deep wells, AC, opening the motor, cutting and removing the burnt windings, cleaning the starter and rotor with cleaning agent. rewinding the motor with appropriate gauge of super enameled copper wire of approved make insulating the winding with same class of insulation and refixing at the same location complete all as specified and directed. |
| 2 | Material and labour for taking up Fountain pump set 7.5 HP 3-phase 415v,50Hz, AC, from Fountain opening the motor, cutting and removing the burnt windings, cleaning the starter and rotor with cleaning agent. rewinding the motor with appropriate gauge of super enameled copper wire insulating the winding with same class of insulation and repairing the pump portion by checking and replacing any damaged gasket etc and refixing at the same location complete all as specified and directed. |
| 3 | Material and labour for taking out Pump set 5HP 3-phase 415v,50Hz, AC, opening the motor, cutting and removing the burnt windings, cleaning the starter and rotor with cleaning agent. rewinding the motor with appropriate gauge of super enameled copper wire insulating the winding with same class of insulation and repairing the pump portion by checking and replacing any damaged gasket etc and refixing at the same location complete all as specified and directed. |
| 4 | Material and labour for taking out Pump set 3 HP 3-phase 415v,50Hz, AC, opening the motor, cutting and removing the burnt windings, cleaning the starter and rotor with cleaning agent. rewinding the motor with appropriate gauge of super enameled copper wire insulating the winding with same class of insulation and repairing the pump portion by checking and replacing any damaged gasket etc and refixing at the same location complete all as specified and directed. |
| 5 | Material and labour for spray Painting of motor/ pump, Two coat enameled paint before one coat of red oxide paint including scraping and writing MES/SM No. complete all as specified and directed of the 7.5/5/3 HP capacities. |
| 6 | Excavation in trenches for laying of CPVC water tubing etc., getting out in soft/loose soil n.exc 1.5m wide and n.exc 1.5m depth complete all as specified and directed. |
| 7 | Returning, filling in trenches including spreading, leveling, watering and in layers n.exc 25cms thick without damaging pipes/special fittings as in any type of soil complete all as specified and directed. |
| 8 | Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 9 | Material and labour for repair/check Pump starter Panel by disconnecting the electric supply and finding out defects and replacing the existing damage items such as bus bar, timer ,power contactor , relay, start stop push button, for the starter panel of for the following capacity of electric motor/ pump complete all as specified and directed. |
| 10 | motor/ pump of capacity 7.5HP 415V , 50 HZ |
| 11 | motor/ pump of capacity 5HP 415V , 50 HZ |
| 12 | motor/ pump of capacity 3HP 415V , 50 HZ |
| 13 | Repair/Replacement of CPVC pipe line checking and arresting of leakage at both ends, testing of leakage after rectifying , complete of the following size of pipe as specified and directed. |
| 14 | a) 75 mm dia (inner) |
| 15 | b) 62.50 mm dia (inner) |
| 16 | c) 50 mm dia (OD) SDR II |
| 17 | d) 40 mm dia (OD) SDR II |
| 18 | e) 32 mm dia (OD) SDR II |
| 19 | f) 25 mm dia (OD) SDR II |
| 20 | Material and labour for disconnecting /removing the old unserviceable starters parts from the panel and supply and fixing faulty contactor with relay for fully automatic star delta starters for AC 415v, 50Hz, 3-phase suitable upto 7.5 HP capacity electric motor complete all as specified and directed . |
| 21 | Supply and mix of filter media In PSF (Pressure Sand Filter ) 460 Kg of water treatment plant of capacity 3000LPH which includes Sand, Silex and Pebbles etc for PSF filters complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Supply and mix of filter media In ACF (Activated Carbon Filter) 340 Kg of water treatment plant of capacity 3000LPH which includes Sand, Silex and Pebbles etc for ACF filters complete including taking out old filter media all as specified and as directed by Engineer-in-Charge.AS per OEM Recommendation. |
| 23 | Supply and mix of resin In softener water treatment plant of capacity 3000LPH which complete including taking out old filter media all as specified and as directed by Engineer-in-Charge. |
| 24 | Supply and Fix of EPDM Rubber gasket, 5mm thick for vessels 800 Od to 700 ID complete including taking out old filter media all as specified and as directed by Engineer-in-Charge. |
| 25 | Supply and Fix only nut, bolt and washers for dish of vessels of size 15mm (D) x 62mm (L), having a set of (1 bolt + 01 nut + 02 Washers) complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Material and labour for construction of block masonry valve pit complete with PCC 1:3:6 type C1 solid block walling 20cm thick set in CM (1:4) over 100 mm thick PCC 1:4:8 type D2 foundation, 50 mm thick PCC 1:2:4 type B1 coping on the top of wall, rendering 15 mm thick with CM 1:4 on inside and exposed external surfaces up to 150mm below GL, 3 mm thick MS sheet cover, angle iron frame and locking arrangement etc., including dismantling old existing damaged valve pit complete of following sizes all as specified and directed:- |
| 27 | a) 0.75m x 0.075m x 0.75m |
| 28 | b) 1.2m x 1.2m x 1.0m |
| 29 | Supply and fix for Ball valve (ISI) marked suitable for CPVC pipe with wheel head screwed both ends for pipe suitable for following bore of pipe including taking down old existing valve complete all as specified and directed. |
| 30 | a) 50 mm bore pipe |
| 31 | b) 40 mm bore pipe |
| 32 | c) 32 mm bore pipe |
| 33 | d) 25 mm bore pipe |
| 34 | Supply and fixing of good quality rain gun type sprinkler automatic HT-40G Penguin 1.25\\" inch rain gun with female threaded, heavy duty, brass nut, tube, nozzles with stainless steel Pivot Pin and nut and bolt with proper fixing arrangement complete all as directed by Engr-in-Charge. |
| 35 | Material & Labour for taking out/lifting of submersible pump with submersible cable, supporting wire and column pipe and lowering after completion complete all as specified and directed by engineer-in-charge. |
| 36 | Material & Labour for flushing of bore well 80 mm Dia through high pressure air compressor upto satisfaction level and carrying out yield test for the same bore well before and after flushing complete all as specified and directed. |
| 37 | Material & Labour for cleaning and washing of inside portion of semi under ground sump (square) of capacity 60000 Liters at SESS Palayamkottai by pumping out complete water including removing of sand/ mud/ slit/ sludge and deposit the mud/ sand to a distance of 50mtr away from UG Sump cleaning the bottom floor and inside wall using wire mesh brush/ scrubber and washing of inner surface using lime and bleaching powder and applying one coat white wash on inner surface, black synthetic enamel paint single coat in metal surface of ladder/ manhole covers etc. and refilling of water through water bowser as specified including writing tank capacity and cleaning date with white paint on the base is black paint complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply and Fix PVC Insulated and PVC three core Sheathed Heavy Duty Industrial Flat Cables for Voltage Grade 1100 Volts, 6 Sqmm, three core suitable submersible motor complete all as specified and directed by engineer-in-Charge. |
| 39 | Supply & Fixing Flood light fitting LED type 100 Watt, , made up of pressure die cast housing, asymmetric wide beam with IP 66 protection, secondary lens with 120 lm/W efficacy and superior aesthetics suitable for various applications,lens design & optical integration with single die ceramic base high power LED to ensure uniform distribution and maintenance free system all as specified and directed by Engr-in-Charge. |
| 40 | Supply & Fixing Flood light fitting LED type 200 Watt, made up of pressure die cast housing, asymmetric wide beam with IP 66 protection, secondary lens with 120 lm/W e cacy and superior aesthetics suitable for various applications,lens design & optical integration with single die ceramic base high power LED to ensure uniform distribution and maintenance free system all as specified and directed by Engr-in-Charge. |
| 41 | Supply and fix in repairs LED Street light fitting 60 W LED complete with all accessories internally pre wired and including connecting up fitting etc, including necessary suitable clamps & bracket complete all as specified and as directed. |
| 42 | Supply and fix HDPE Pipe, PN 10 grade, 10 Kg/cm² pressure rating, 75mm dia complete all specified and as directed. |
| 43 | Supply and fix HDPE Pipe, PN 10 grade, 10 Kg/cm² pressure rating, 65mm dia complete all specified and as directed. |
| 44 | Labour only For repairing/Servicing of package type STP of capacity 20KLD of Make Thermax by proper cleaning the pipe lines by using the air blower by engaging the OEM technician complete all as directed by Engg-in-charge. |
| 45 | Material & Labour for Replacement of Bar Screen Complete set all as directed by Engg-in-charge. |
| 46 | Material & Labour for Servicing of raw sewage transfer pump/ filter feed pump/sludge pump of any capacity complete all as directed by Engg-in-charge. |
| 47 | Material & Labour for servicing of air blower complete all as directed by Engg-in-charge. |
| 48 | Material & Labour for Replacement of Biogas media complete all as directed by Engg-in-charge. |
| 49 | Material & Labour for Replacement of tube settler media complete all as directed by Engg-in-charge. |
| 50 | Material & Labour for welding of each & every spot as shown at site for damaged plate Supply & Fixing RP lining in tanks complete all as directed by Engg-in-charge. |
| 51 | Material & Labour for media for DMF in STP (300 Kg) complete all as directed by Engg-in-charge. |
| 52 | Material & Labour for media for ACF in STP (265 Kg) complete all as directed by Engg-in-charge. |
| 53 | Material & Labour for replacement of damaged multiport valve complete all as directed by Engg-in-charge. |
| 54 | Material & Labour for replacement of damaged Interconnecting pipe Supply & Fixing complete all as directed by Engg-in-charge. |
| 55 | Material & Labour for level switches complete all as directed by Engg-in-charge. |
| 56 | Material & Labour for pressure gauges complete all as directed by Engg-in-charge. |
| 57 | Material & Labour for auto valve complete all as directed by Engg-in-charge. |
| 58 | Material & Labour for Replacement damaged panel wiring & cable with existing size complete all as directed by Engg-in-charge. |
| 59 | Material and labour for preparing of inside (Epoxy 1 layers of coating) and outside surfaces of pressure feed water filtration plant (WTP) vessel consisting of Multigarde filter and ACF Filter 3000 LPH capacity including all frontal pipes located at SESS by applying one coat of synthetic enamel paint (as per existing colour) with spray painting machine including after applying one coat of red oxide primer complete all as specified and as directed. |
| 60 | Material and labour for preparing of inside (Epoxy 1 layers of coating) and outside surfaces of STP 20KLD capacity including all frontal pipes located at SESS by applying one coat of synthetic enamel paint (as per existing colour) with spray painting machine including after applying one coat of red oxide primer complete all as specified and as directed. |
| 61 | Material & Labour for attend breakdown complaints like no water supply in service tank, pipe line leakages etc and also removing air lock in OTM accommodation with help of required tools and all as specified and directed. |
| 62 | Material & Labour for Bacteriological/Physical/Chemical testing of water samples from various locations of SESS Pkt. Sample shall be collected by contractor and testing will be done at authorized/ Govt laboratory complete all as specified and directed by engineer-in-Charge.The water testing should be consisting of following tests/parameters:-(a) Coliform Organism(b) E.coil(c) Turbidity(d) PH Value(e) TDS(f) Alkalinity as CaCO3(g) Iron as Fe(h) Calcium as Ca(j) Copper as Cu(k) Residual free Chlorine(l) Fluoride as F(m) Magnesium as Mg(n) Chloride as Cl(o) Nitrate as O3(p) Total hardness as CACO3 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender