Tender For Special Repair/Replacement Of Ber Centrifugal Pump, Non Clog Pumps And Other Connected Work At Water Supply Installations Under Ge (A) Ahmedabad
Tender Value
48.52 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
11 days left
EMD
97100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Ber Centrifugal Pump, Non Clog Pumps And Other Connected Work At Water Supply Installations Under Ge (A) Ahmedabad
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (Army) Ahmedabad NAME OF WORK : SPECIAL REPAIR/REPLACEMENT OF BER CENTRIFUGAL PUMP, NON CLOG PUMPS AND OTHER CONNECTED WORK AT WATER SUPPLY INSTALLATIONS UNDER GE (A) AHMEDABAD CONTRACT AGREEMENT: GE (A)/ABD/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Fabrication, supply, installation, testing and commissioning electrical Indoor cubical control panel board double door, CPRI approved factory assembled floor mounted weather and vermin proof, size 2000x2000x600mm, fabricated with 1.6mm CRCA MS sheet of suitable size,3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating with RAL 7032 or RAL 7035 complete with locking arrangement, earthing terminals with suitable rating of insulate colour code copper wire for outgoing from MCCB to MCCB, soft starter, contactor, Exhaust fan and up to connection of outgoing terminal etc including and Mounting measuring instrument such as digital Volt meter, digital Ammeter, Selector switches, CT's , LED Phase indicator lamps with holder & control MCB , Stop & Strat button with ON/OFF LED indicator Green/Red, toggle switch etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of Panel box on ISMS channel Section depth 75mm and wall thickness 4.2mm or more, at the bottom of entire panel and having 305 mm gap between foundation and bottom of the feeder pillar box and making foundation embedded in PCC (1:2:4) using 20mm graded complete all as specified and directed.(Cubical control panel shall be consisting the following)(a) 4 Nos wire high conductivity aluminium busbar, properly insulated and colour coded, 03 Nos for phases (RYB) rating 1000 Amps and 01 No neutral connected with MCCB/MPCB rating and duly supports (b) MCCB FP 630 amps, 50 KA, 415 volts, 50Hz (Adjustable type Thermal magnetic release and overload) - 01 Nos (Incoming)(c) MCCB TP Current rating range 100 amps, 35 KA - 07 Nos (Outgoing) Make: L&T / Legrand / Schneider / ABB(d) Microprocessor-based 3-phase controlled Soft Starter unit rated for continuous operation at 40 HP Heavy-Duty (Duty Class 20, 65–70 A current rating). Shall feature an integrated bypass contactor, front-panel adjustable rotary potentiometers (dials) for acceleration/deceleration ramp times (1–30 sec), initial start torque, and soft-stop ramp specifically designed to prevent Water Hammer and pressure surges in deep borewell riser pipes. Includes solid-state protections for electronic overload, phase reversal, phase loss, under/over voltage, locked rotor, and adjustable undercurrent (dry-run) protection- 07 Nos (Make: L&T/Danfoss/Schneider Electric/ Siemens / Rockwell / Allen-Bradley /ABB |
| 3 | (e) Power contactor 3 phase, 415 volt 80 Amps - 07 Nos Make: L&T/Legrand/Schneider(f) Industrial axial exhaust fan assembly of size 120mm x 120mm x 38mm, rated 230V AC, 50Hz for minimum 100 CFM free air delivery with dual ball bearing motor. The unit shall be complete with a snap-fit ABS louvered grill (RAL 7035), G3 grade washable synthetic polyurethane filter mat for IP54 protection, and nickel-chrome plated finger guard, suitable for panel door cutout mounting – 08 Nos(g) Digital Panel mounted Amp meter 96 mm square type complete with selector switch with suitable size of CTs (100/5 A, Class 1.0, 5 VA) - 07 Set for each Motor(h) Digital Panel mounted Volt meter 96 mm square type complete with selector switch- 01 Nos(i) Heavy-duty Start/Stop push buttons Green / Red, and LED panel indication lamps (Phase presence R-Y-B, Run, Stop, Trip) and Control MCB - 08 Set for each Motor(j) Internal Wiring & Earthing: Heavy-duty of suitable size FRLS flexible copper power wiring, crimped copper lugs, DIN-rail mounted terminal blocks, and dual internal earthing studs(k) RYB indicating lamp, LED type and Control MCB - 01 sets.(l) Four pole connectors for connection of outdoor submersible copper cable, capable to carry 100 Amps for each Motor(m) Cost of PCC for foundation is deemed to be included in quoted rate by the contractor.(n) Drawing shall be approved by GE before placing the order. (Panel for Gymkhana Old Pump house) |
| 4 | All as per item No 1 above but of size of panel 1950x1650x550mm complete all as specified and directed.(Cubical control panel shall be consisting the following)(a) 4 Nos wire high conductivity aluminium busbar, properly insulated and colour coded, 03 Nos for phases (RYB) rating 1000 Amps and 01 No neutral connected with MCCB/MPCB rating and duly supports (b) MCCB FP 630 amps, 50 KA, 415 volts, 50Hz (Adjustable type Thermal magnetic release and overload) - 01 Nos (Incoming)(c) MCCB TP Current rating range 100 amps, 35 KA - 06 Nos (Outgoing) Make: L&T / Legrand / Schneider / ABB(d) Microprocessor-based 3-phase controlled Soft Starter unit rated for continuous operation at 40 HP Heavy-Duty (Duty Class 20, 65–70 A current rating). Shall feature an integrated bypass contactor, front-panel adjustable rotary potentiometers (dials) for acceleration/deceleration ramp times (1–30 sec), initial start torque, and soft-stop ramp specifically designed to prevent Water Hammer and pressure surges in deep borewell riser pipes. Includes solid-state protections for electronic overload, phase reversal, phase loss, under/over voltage, locked rotor, and adjustable undercurrent (dry-run) protection- 06 Nos (Make: L&T/Danfoss/Schneider Electric/ Siemens / Rockwell / Allen-Bradley /ABB (e) Power contactor 3 phase, 415 volt 80 Amps - 06 Nos Make: L&T/Legrand/Schneider(f) Industrial axial exhaust fan assembly of size 120mm x 120mm x 38mm, rated 230V AC, 50Hz for minimum 100 CFM free air delivery with dual ball bearing motor. The unit shall be complete with a snap-fit ABS louvered grill (RAL 7035), G3 grade washable synthetic polyurethane filter mat for IP54 protection, and nickel-chrome plated finger guard, suitable for panel door cutout mounting – 07 Nos |
| 5 | (g) Digital Panel mounted Amp meter 96 mm square type complete with selector switch with suitable size of CTs (100/5 A, Class 1.0, 5 VA) - 06 Set for each Motor(h) Digital Panel mounted Volt meter 96 mm square type complete with selector switch- 01 Nos(i) Heavy-duty Start/Stop push buttons Green / Red, and LED panel indication lamps (Phase presence R-Y-B, Run, Stop, Trip) and Control MCB - 06 Set for each Motor(j) Internal Wiring & Earthing: Heavy-duty of suitable size FRLS flexible copper power wiring, crimped copper lugs, DIN-rail mounted terminal blocks, and dual internal earthing studs(k) RYB indicating lamp, LED type and Control MCB - 01 sets.(l) Four pole connectors for connection of outdoor submersible copper cable, capable to carry 100 Amps for each Motor(m) Cost of PCC for foundation is deemed to be included in quoted rate by the contractor.(r) Drawing shall be approved by GE before placing the order. ( Panel for Gymkhana New Pump house) |
| 6 | All as per item No 1 above but of size of panel 1650x1550x550mm complete all as specified and directed.(Cubical control panel shall be consisting the following)(a) 4 Nos wire high conductivity aluminium busbar, properly insulated and colour coded, 03 Nos for phases (RYB) rating 400 Amps and 01 No neutral connected with MCCB/MPCB rating and duly supports (b) MCCB FP 250 amps, 35 KA, 415 volts, 50Hz (Thermal magnetic release and overload) - 01 Nos (Incoming)(c) MCCB TP Current rating range 100 amps, 35 KA - 04 Nos (Outgoing) Make: L&T / Legrand / Schneider / ABB(d) Microprocessor-based 3-phase controlled Soft Starter unit rated for continuous operation at 40 HP Heavy-Duty (Duty Class 20, 65–70 A current rating). Shall feature an integrated bypass contactor, front-panel adjustable rotary potentiometers (dials) for acceleration/deceleration ramp times (1–30 sec), initial start torque, and soft-stop ramp specifically designed to prevent Water Hammer and pressure surges in deep borewell riser pipes. Includes solid-state protections for electronic overload, phase reversal, phase loss, under/over voltage, locked rotor, and adjustable undercurrent (dry-run) protection- 04 Nos (Make: L&T/Danfoss/Schneider Electric/ Siemens / Rockwell / Allen-Bradley /ABB (e) Power contactor 3 phase, 415 volt 80 Amps - 04 Nos Make: L&T/Legrand/Schneider(f) Industrial axial exhaust fan assembly of size 120mm x 120mm x 38mm, rated 230V AC, 50Hz for minimum 100 CFM free air delivery with dual ball bearing motor. The unit shall be complete with a snap-fit ABS louvered grill (RAL 7035), G3 grade washable synthetic polyurethane filter mat for IP54 protection, and nickel-chrome plated finger guard, suitable for panel door cutout mounting – 05 Nos |
| 7 | (g) Digital Panel mounted Amp meter 96 mm square type complete with selector switch with suitable size of CTs (100/5 A, Class 1.0, 5 VA) - 04 Set for each Motor(h) Digital Panel mounted Volt meter 96 mm square type complete with selector switch- 01 Nos(i) Heavy-duty Start/Stop push buttons Green / Red, and LED panel indication lamps (Phase presence R-Y-B, Run, Stop, Trip) and Control MCB - 04 Set for each Motor(j) Internal Wiring & Earthing: Heavy-duty of suitable size FRLS flexible copper power wiring, crimped copper lugs, DIN-rail mounted terminal blocks, and dual internal earthing studs(k) RYB indicating lamp, LED type and Control MCB - 01 sets.(l) Four pole connectors for connection of outdoor submersible copper cable, capable to carry 100 Amps for each Motor(m) Cost of PCC for foundation is deemed to be included in quoted rate by the contractor.(r) Drawing shall be approved by GE before placing the order. ( Panel for Central Pump house room No 1 & SBI pump house No 2) |
| 8 | All as per item No 1 above but of size of panel 1300x1600x550mm complete all as specified and directed.(Cubical control panel shall be consisting the following)(a) 4 Nos wire high conductivity copper, properly insulated and colour coded, 03 Nos for phases (RYB) rating 400 Amps and 01 No neutral connected with MCCB/MPCB rating and duly supports (b) MCCB FP 250 amps, 35 KA, 415 volts, 50Hz (Thermal magnetic release and overload) - 01 Nos (Incoming)(c) MCCB TP Current rating range 100 amps, 35 KA - 03 Nos (Outgoing) Make: L&T / Legrand / Schneider / ABB(d) Microprocessor-based 3-phase controlled Soft Starter unit rated for continuous operation at 40 HP Heavy-Duty (Duty Class 20, 65–70 A current rating). Shall feature an integrated bypass contactor, front-panel adjustable rotary potentiometers (dials) for acceleration/deceleration ramp times (1–30 sec), initial start torque, and soft-stop ramp specifically designed to prevent Water Hammer and pressure surges in deep borewell riser pipes. Includes solid-state protections for electronic overload, phase reversal, phase loss, under/over voltage, locked rotor, and adjustable undercurrent (dry-run) protection- 03 Nos (Make: L&T/Danfoss/Schneider Electric/ Siemens / Rockwell / Allen-Bradley /ABB (e) Power contactor 3 phase, 415 volt 80 Amps - 03 Nos Make: L&T/Legrand/Schneider(f) Industrial axial exhaust fan assembly of size 120mm x 120mm x 38mm, rated 230V AC, 50Hz for minimum 100 CFM free air delivery with dual ball bearing motor. The unit shall be complete with a snap-fit ABS louvered grill (RAL 7035), G3 grade washable synthetic polyurethane filter mat for IP54 protection, and nickel-chrome plated finger guard, suitable for panel door cutout mounting – 04 Nos |
| 9 | (g) Digital Panel mounted Amp meter 96 mm square type complete with selector switch with suitable size of CTs (100/5 A, Class 1.0, 5 VA) - 03 Set for each Motor(h) Digital Panel mounted Volt meter 96 mm square type complete with selector switch- 01 Nos(i) Heavy-duty Start/Stop push buttons Green / Red, and LED panel indication lamps (Phase presence R-Y-B, Run, Stop, Trip) and Control MCB - 03 Set for each Motor(j) Internal Wiring & Earthing: Heavy-duty of suitable size FRLS flexible copper power wiring, crimped copper lugs, DIN-rail mounted terminal blocks, and dual internal earthing studs(k) RYB indicating lamp, LED type and Control MCB - 01 sets.(l) Four pole connectors for connection of outdoor submersible copper cable, capable to carry 100 Amps for each Motor(m) Cost of PCC for foundation is deemed to be included in quoted rate by the contractor.(q) Drawing shall be approved by GE before placing the order. ( Panel for SBI Pump house room No 1 & 2 and Central Pump house room No 2) |
| 10 | Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 95sq mm 3.5 core complete all as specified and directed. |
| 11 | Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 50 sq mm 3.5 core complete all as specified and directed. |
| 12 | Excavating in trenches in soft soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed. |
| 13 | Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed. |
| 14 | Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed. |
| 15 | Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed. |
| 16 | Supply and fixing Earth continuty conductor or main earthing lead fixed to wall on batten or recess chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other loop earthing etc. as required 25X4mm galvanised iron strip all as specified and directed. |
| 17 | Supplying,lowering & Fixing flexible flat copper submersible cable, 3 Core x 16 sq. mm 1100V (1.1 kV) grade heavy-duty insulated with water and moisture-resistant PVC compound with color-coded cores (Red, Yellow, Blue), and sheathed overall with a tough, water-impermeable, abrasion-resistant black/blue flat PVC compound designed for continuous underwater duty in deep borewells including clipping along the riser MS column pipe and testing before and after lowering, complete all as specified and directed. |
| 18 | All as per Item no-12 above but of size 25 Sqmm, 3 core1100 volts grad complete all as specified and directed. |
| 19 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 20 | All as per Item no-14 above but of size outer dia 77 mm and inner dia 63 mm complete all as specified and directed. |
| 21 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity is less than 0.12 Ohm meter).The bove arrangements shall be provided with heavy duty earth poly plastic pit cover of 4000 kg load bearing capacity (Size:270 x 40 200mm) complete all as specified and directed. |
| 22 | Supply, Install, commissioning & testing for Centrifugal pump set, electric driven 415 V, Three phase suitable for 150/200/250 mm dia bore/open well of 40 HP Pump motor set RPM 2900, Head Max 60 mtrs, flow rate 150 m3/hrs, 50Hz, material : casting iron casing, stainless steel shaft approx impeller size dia max 370mm, minimun 295mm, single stage, side inlet including RCC foundation as per manufacturer instructions including orientation / Addition / alteration including CI flanged ends double rubber seat ball type foot valve 150mm dia complete all as specified and directed.Make-Kirloskar model No KM230T0ANCB03TSS or equivalent in KSB/ABB india ltd Note : Motor and pump shall be of same make |
| 23 | Supply, installation, testing, and commissioning of heavy-duty, electric-motor-driven, non-clog submersible sewage pump set of 12.5 HP (9.3 kW) capacity, operating at 415V, 3-Phase, 50 Hz. Design duty point of Flow Rate 108 m³/hr (30 L/sec) against total Dynamic Head of 18 meters including Motor of speed: 1440 RPM (4-pole) with enclosure protection rating IP68, Class F insulation with Class B temperature rise and Pump Casing made with cast Iron Grade FG 260, Impeller made with cast Iron Grade FG 260 Non-Clog Vortex design capable of passing solid spheres up to 75 mm diameter and Pump Shaft made with High-tensile Stainless Steel (SS 410/420), Sealing with Double mechanical seal with intermediate oil chamber complete with submersible EPR/rubber-sheathed flexible power cable, duck-foot bend auto-coupling system, guide rail brackets, SS 304 lifting chain (5m lift rating), complete all as specified and directed. |
| 24 | Supply, installation, testing, and commissioning of Horizontal Centrifugal Type Monoblock Pump Set suitable for 415 V (±10%), 3-Phase, 50 Hz AC supply, having a rated motor output of 12.5 HP (9.3 kW), operating at 1450 RPM (4-Pole) synchronous speed and pump set shall deliver a minimum discharge capacity of 28 Litres/Second (100.8 m³/hr) against a total head of 19 meters and drive motor shall be an integral, foot-mounted, squirrel-cage induction motor conforming to IE2 (Premium Efficiency) grade including entire assembly shall be rigidly mounted on a common heavy-duty fabricated channel base frame, complete with companion flanges, foundation bolts, leveling shims, and terminal accessories including all fixing arrangement like cutting and welding of pipe, supply & fixing of tee/ bend, angle iron base for pump set of sutiable size complete all as specified and directed.Note : (i) The rate quoted is including Taking out motor & pump keep safe custody and deposit in MES store. |
| 25 | S&F Bare Shaft Centrifugal Pump Only (excluding motor, base frame, coupling, and electrical components) designed for a duty point of 60 m head and 150 m³/hr discharge capacity (suited for a 30 HP / 22 kW rating) with a Cast Iron Casing, SS Shaft, and 370 mm Max Impeller Diameter suitable for connecting/align with existing electric motor and testing up to satisfaction of engineer-in -charge complete all as specified and directed.Note (i) The rate quoted is including of removing unserviceable centrigugal pump from motor at site and deposit old unserviceable Pump to AGE E/M store yard. . Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender