Tender For Repair/Replacement Of Rusted Unservicable Ci/Gi Pipe Lines And Connected Items At Drdo Township Kanchanbagh Hyderabad.
Tender Value
46 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
23 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Rusted Unservicable Ci/Gi Pipe Lines And Connected Items At Drdo Township Kanchanbagh Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repairs brass spindle with check nut of sluice valve, including replacing gland packing and rubber gasket complete all as directed for the following sizes of sluice valves:-Note :- Work shall be carried out without causing any interruption of regular water supply. |
| 2 | All as per srl item No.01 here-in-before but of size 80 mm bore sluice valve |
| 3 | All as per srl item No.01 here-in-before but of size 100 mm bore sluice valve |
| 4 | All as per srl item No.01 here-in-before but of size 150 mm bore sluice valve |
| 5 | All as per srl item No.01 here-in-before but of size 200 mm bore sluice valve |
| 6 | All as per srl item No.01 here-in-before but of size 250 mm bore sluice valve |
| 7 | S&F in repairs of Impeller brass suitable for 40/60 HP Kirloskar centrifugal pump set |
| 8 | M&L for flushing of the existing borewells of size 150 mm dia upto 250 feet depth by drilling machine by mechanical method or PVC pipe method into the above well connected to a pneumatic compressor after taking out the submersible pumpset with necessary hoisting equipment and flushing the bore well complete with compressor air and flushing bore well till discharge of fresh water is obtained subject to entire satisfaction of Engr-in-charge and lowering down the submersible pump set in its position complete all as directed. |
| 9 | Taking out unserviceable GI socket from 50 mm column pipe and S&F new GI socket 50 mm (ISI marked) long type,heavy duty suitable for the column pipe complete all as directed. |
| 10 | Cutting the existing damaged threading of GI column pipe 50 mm dia and re-threading on lathe machine complete all as directed. |
| 11 | Removing old unserviceable column pipe as obtained from lowering of submersible pump set and S&F new GI column pipe 50mm dia, ISI marked, 3 metre length each, both ends machine threaded with long threaded socket complete all as directed.Note: 3mtrs pipe, threading on both sides and socket shall be measured as one unit. Make : Oswal/Jindal |
| 12 | Taking out unserviceable CI sluice valve in repairs from the existing position by opening nuts, bolts and breaking of valve chamber including neceessary earth work and excavation in any type of soil and supply and fix CI Sluice valve class PN 1.6 ISI marked flange type suitable and with iron wheel head brass/stainless steel spindle and nut and all other connected accessories such as gland packing bolts, nuts and rubber gasket etc complete and making good the valve chamber to match with the sourrounding including brick work, plastering and all other connected works for the following dia CI sluice valves Note :- The work shall be carried out without causing any interruption of regular water supply at DRDO Township. Excavation measured saperately |
| 13 | All as per srl item No.07 here-in-before but of size 250 mm bore |
| 14 | All as per srl item No.07 here-in-before but of size 200mm bore |
| 15 | All as per srl item No.07 here-in-before but of size 150mm bore |
| 16 | All as per srl item No.07 here-in-before but of size 100mm bore |
| 17 | All as per srl item No.07 here-in-before but of size 80mm bore |
| 18 | S/F & repair gun metal gate valves ISI marked with iron wheel head and both ends screwed including removing of unserviceable gun metal gate valve from the existing position of the following size gun metal valves complete all as directed. |
| 19 | All as per srl item No.08 here-in-before but of size 15mm dia |
| 20 | All as per srl item No.08 here-in-before but of size 20mm dia |
| 21 | All as per srl item No.08 here-in-before but of size 25mm dia |
| 22 | All as per srl item No.08 here-in-before but of size 40mm dia |
| 23 | All as per srl item No.08 here-in-before but of size 50mm dia |
| 24 | All as per srl item No.08 here-in-before but of size 80mm dia |
| 25 | Renewal of worn out gland packing “T” bolt and nuts, rubber packing for the following size of CI sluice valves |
| 26 | All as per srl item No.09 here-in-before but of size 80mm bore |
| 27 | All as per srl item No.09 here-in-before but of size 100mm bore |
| 28 | All as per srl item No.09 here-in-before but of size 150mm bore |
| 29 | All as per srl item No.09 here-in-before but of size 200mm bore |
| 30 | All as per srl item No.09 here-in-before but of size 250mm bore |
| 31 | Supply and Fix Butterfly valve of size 150mm dia both ends flanged and drilled complete with all accessories of class PN 1.6 conforming to IS specifications and testing including removing the unserviceable valve complete all as directed Make :- ADVANCE/KIRLOSKAR/ AUDCO |
| 32 | All as per item No.10 above, but of size 100 mm dia |
| 33 | All as per item No. 10 above, but of size 80 mm dia |
| 34 | S & F in repair float valves ISI marked high pressure of PTMT with epoxy coated sluminium rod and high density plastic ball, screwed for 20mm bore iron pipe, including replacement of aduscent GI fittings complete, weight not less than 210 grm. Make : Prayag / Polytuff |
| 35 | Removing the existing unserviceable Bib taps and Supply and Fix Bib tap of size 15 mm dia standard of PTMT any colour and high pressure screwed for iron pipe and all as specified and directed. Make:- PRAYAG or its equivalent |
| 36 | Removing unserviceable PVC water proof cable of any size as obtained from lowering of submersible pump set and S&F new PVC water proof copper cable of size 3 core 2.5 sqmm suitable for submersible pump set complete all as directed.Make:- FINOLEX/FINECAB/PAYAL |
| 37 | S&F of 5000 Lts capacity rotational mounted polyethylene water storage tank double layered (cylindrical vertical with closed top) as per IS-1270 - 1989 hoisted including 25 mm dia ball valve PVC with polyethylene float and fly nut and fixed in position including removing existing unserviceable tank complete all as directed .Make :- Sintex/Polycon |
| 38 | Supply, fabricate and fixing MS framed equal angle grills,gratings, framed guard bars,ladder, framework of Valve pit cover, water tanks, shallow wells etc, or similar work as ordered and fabricated from MS rolled section of any size and shape as directed and fixed at position with all fixing accessories complete. |
| 39 | Taking out unserviceable Gun metal non returning valve from the existing position by opening nuts, bolts and breaking of valve chamber including neceessary earth work and excavation in any type of soil and supply and fix CI non returning valve both side flanged and suitable drilled and all other connected accessories such as nuts, bolts and rubber gasket etc complete and making good the valve chamber to match with the sourrounding including brick work plastering and all connected works for the following dia non-return valve complete all as directed.Make :- Kirloskar/Durga/KartharNote :- Work shall be carriedout without causing any interruption of regular water supply. |
| 40 | All as per srl item No.18 here-in-before but of size 100 mm bore |
| 41 | All as per srl item No.18 here-in-before but of size 80 mm bore |
| 42 | All as per srl item No.18 here-in-before but of size 50 mm bore |
| 43 | Taking out old unserviceable GI pipe line and supply and fixing/ laying GI tubing medium grade of following dia, laid in trenches/ floors or fixed to walls including necessary GI fittings such as bends, elbows, nipple, sockets, unions, reducers, tees etc and making good the surface to match with existing surface complete all as directed .Note : - Necessary excavation and earth work shall be measured and paid separately under relavent items. |
| 44 | All as per srl item No.19 here-in-before but of size 15 mm dia |
| 45 | All as per srl item No.19 here-in-before but of size 20 mm dia |
| 46 | All as per srl item No.19 here-in-before but of size 25 mm dia |
| 47 | All as per srl item No.19 here-in-before but of size 40mm dia |
| 48 | All as per srl item No.19 here-in-before but of size 50 mm dia |
| 49 | All as per srl item No.19 here-in-before but of size 80 mm dia |
| 50 | All as per srl item No.19 here-in-before but of size 100mm dia |
| 51 | Taking out old blocked GI tubing of the following dia with all accessories such as Bend, Elbow, Tees, Nipples, sockets, unions, reducers from any position (in trenches/ floors/ walls) and cleaning of the same and refixing in original position and making good the surface to match with existing surface including necessary excavation and earthwork complete all as directed. |
| 52 | All as per srl item No.20 here-in-before but of size 15 mm dia |
| 53 | All as per srl item No.20 here-in-before but of size 20 mm dia |
| 54 | All as per srl item No.20 here-in-before but of size 25 mm dia |
| 55 | All as per srl item No.20 here-in-before but of size 40 mm dia |
| 56 | S&F in repair GI Tee, Union, Bend, socket, Running nipple up to 100mm long with both ends threaded, including cutting rethreading the existing pipe including necessary excavation and earthwork complete for the following sizes :- |
| 57 | All as per srl item No.21 here-in-before but of size 15mm dia |
| 58 | All as per srl item No.21 here-in-before but of size 20 mm dia |
| 59 | All as per srl item No.21 here-in-before but of size 25mm dia |
| 60 | All as per srl item No.21 here-in-before but of size 40 mm dia |
| 61 | All as per srl item No.21 here-in-before but of size 50 mm dia |
| 62 | All as per srl item No.21 here-in-before but of size 80 mm dia |
| 63 | All as per srl item No.21 here-in-before but of size 100 mm dia |
| 64 | Supply and lay pipe ductile Iron in repairs , S/S including specials, Class “K-7” ,150 mm (6”) diameter pipe all as directed and specified |
| 65 | All as per srl item No.22 here-in-before but of 100 mm dia |
| 66 | All as per srl item No.22 here-in-before but of 80 mm dia |
| 67 | S&F DI fittings such as bends, Tee, collars flange type or socket type suitable for various size of CI pipe such as 80/100/150mm including taking down old unservicable fittings complete all as specified. |
| 68 | Excavation in trenches, not exceeding 1.5mm wide and not exceeding 1.5m in depth for laying of pipe line and getting out in any type of soil complete all as directed. |
| 69 | Returning filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm thick using soil complete all as directed. |
| 70 | Removal of excavated soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed. |
| 71 | M&L for preparing surfaces and painting the pipe lines with two coats of synthetic enamel paint of color as directed by the Engr-in-charge and marking the inflow/outflow arrows on the pipeline near the pumps/ sump/ OHT all as directed and specified |
| 72 | M&L for dismantling old valve chamber and material and labour for construction of brick masonry new valve pit chamber of size 900mmx900mmx600mm (internal), 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate, providing with old size fly ash bricks masonry wall of 230mm thick built in CM 1:6, rendering 15mm thick in CM 1:6 finished even and smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even externally and plaster shall be done 150 mm below ground level, supply and fix 2.00 mm thick MS sheet steel cover fixed on 40X40X6mm angle iron frame embedded in PCC 1:2:4 coping with locking arrangement and MS hold fast and handle made out of 25x6mm flat iron, applying two coats of synthetic enamel paint of approved shade over a coat of primer (red oxide) to all exposed steel surfaces and applying three coats of white wash to exposed plastered surfaces and making good all disturbed suface to match surrounding complete all as specified and as directed . |
| 73 | Caulking only existing leaking lead joint including jointing materials such as lead, lead wool for the following size of CI pipe line including necessary excavation and earthwork complete all as directed. |
| 74 | All as per srl item No.32 here-in-before but of size 80 mm bore |
| 75 | All as per srl item No.32 here-in-before but of size 100 mm bore |
| 76 | All as per srl item No.32 here-in-before but of size 150 mm bore |
| 77 | All as per srl item No.32 here-in-before but of size 200 mm bore |
| 78 | All as per srl item No.32 here-in-before but of size 250 mm bore |
| 79 | S&F of 1000 Lts capacity rotational mounted polyethylene water storage tank double layered (cylindrical vertical with closed top) as per IS-1270 - 1989 hoisted including 25 mm dia ball valve PVC with polyethylene float and fly nut and fixed in position including removing existing unserviceable tank complete all as directed. |
| 80 | POOL STANDARD – B23 Pool algaecide specifically effective against green, black spot & mustard algae.Packing: 5 Kg. sealed plastic container Make: Declibac or equivalent |
| 81 | POOL STANDARD – A94Fast acting pool clarifier to clear dull, hazy or cloudy water which can occur in newly filled pools, during warm weather, with pool start up or with algae growth. Packing: 25 Kg. sealed plastic container Make: Declibac or equivalent |
| 82 | POOL STANDARD – T19 Pool balance module to check water parameters with following ranges: pH: 6.8 – 8.4Total Alkalinity: 0 ppm - 240ppmAvailable Chlorine: 0 ppm - 5 ppmHardness: 0 ppm - 1000 ppmStabiliser: 0 ppm - 250 ppmPacking: 50 strips in sealed plastic container Make: Declibac or equivalent |
| 83 | POOL STANDARD – G24Pool balance module to increase Chlorine (sanitiser) level in pool water.Target limits for Free Available Chlorine: 2 ppm – 4 ppmPacking: 20 pieces in plastic container Make: Declibac or equivalent |
| 84 | SUSPENDER FOR POOL STANDARD - G24Specifications: Metallic dead weight min. 4 KgCylindrical configuration with base gripSuspension length: 6 Metres to 10 MetresStick holding capacity: 5Fastening mode: Thermoplastic hookMake: Declibac or equivalent |
| 85 | Caulking only existing leaking lead joint including jointing materials such as lead, lead wool for the following size of CI pipe line including necessary excavation and earthwork complete all as directed. |
| 86 | All as per srl item No.38 here-in-before but of size 80 mm bore |
| 87 | All as per srl item No.38 here-in-before but of size 100 mm bore |
| 88 | All as per srl item No.38 here-in-before but of size 150 mm bore |
| 89 | All as per srl item No.38 here-in-before but of size 200 mm bore |
| 90 | All as per srl item No.38 here-in-before but of size 250 mm bore |
| 91 | S&F of 1000 Lts capacity rotational mounted polyethylene water storage tank double layered (cylindrical vertical with closed top) as per IS-1270 - 1989 hoisted including 25 mm dia ball valve PVC with polyethylene float and fly nut and fixed in position including removing existing unserviceable tank complete all as directed. Please Enable Macros to View BoQ information |
| 92 | S&F of 1000 Lts capacity rotational mounted polyethylene water storage tank double layered (cylindrical vertical with closed top) as per IS-1270 - 1989 hoisted including 25 mm dia ball valve PVC with polyethylene float and fly nut and fixed in position including removing existing unserviceable tank complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender