Tender For Repair/ Maintenance Of Flooring And Wall Tiling At Old Navy Nagar Under Age B/R-I Navy Nagar Of Ge (Nw) Navy Nagar, Colaba, Mumbai.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
21 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Flooring And Wall Tiling At Old Navy Nagar Under Age B/R-I Navy Nagar Of Ge (Nw) Navy Nagar, Colaba, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposal of debris out side the MoD land etc complete all as specified and directed. |
| 2 | M&L Machine cut mirror polished kota stone slab flooring 18-20mm thick over and including cement screed base in CM(1:4) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 3 | M&L Machine cut mirror polished Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed in CM (1:4), 15 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 4 | M&L for Non -skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement mortar screedbed in CM 1:6 etc complete all as specified and directed by Engr-in-Charge |
| 5 | M&L for Non-skid Ceramic tiles (600mm x 600mm) 8 to 9 mm thick (square/ rectangular), light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement mortar screedbed in CM 1:6 etc complete all as specified and directed by Engr-in-Charge |
| 6 | M&L for Glazed coloured ceramic tiles in vertical surface 450X 300X 6 to7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat complete all as specified and directed by Engr-in-Charge |
| 7 | Dismantling of Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc laid beded and pointed in any mortar including removing debris outside MoD area at any distance complete all as specified. |
| 8 | M&L 18-20mm thick mirror polished Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like over including15m thick screed bed or bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 9 | M&L for udaipur green/baroda green marble slab 18-20 mm thick on vertical surface, steps, jambs, pillars, window cills, cooking platforms and like, machine cut, bedded and jointed with grey cement slurry over and including 15mm thick rendering in CM 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete all as specified and directed. |
| 10 | Providing edge moulding to 18 -20mm thick Granite work, marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 11 | Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. Hard concrete should not be removed by force complete all as specified and directed |
| 12 | Mixing and applying premix SBR latex polymer modified cement mortar 30 mm thick as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed (Note : Rate includes the rate of steel scaffoldings at G+5 Storey Bldg. No separate payment will be paid for scaffoldings). |
| 13 | Taking down, easing and adjusting and finally refixing the shutters in the same opening, shutters of any description exc 1 sq. m and nexc 2 sq. m each complete all as specified and directed . |
| 14 | Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and disposal of rubbish outside MoD land at any distance. Note :- Rates should include steel pipe scaffolding upto G+5 story bldg |
| 15 | M&L for rendering 20mm thick plaster with ready mix prepacked proportioned dry mix mortar on brick wall or concrete surfaces, including transporting of material, mixing, curing, etc.complete all as specified and directed by Engr-In- Charge. Note:- (i) The plaster should be carried out in two layer first layer should be 15mm finished with brush mark and the second layer of 5mm thick plaster.(ii) After finishing the first layer it should be curing for next 14 days before applying the second layer of plaster and applying second layer of plaster same curing process will be follow as intial one.(iii) Rates should include steel pipe scaffolding upto G+5 story bldg |
| 16 | M&L for rendering 15mm thick plaster with ready mix prepacked proportioned dry mix mortar on brick wall or concrete surfaces, including transporting of material, mixing, curing, etc.complete all as specified and directed by Engr-In- Charge. |
| 17 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and directed by Engr-In- Charge. |
| 18 | M&L for applying two or more coats of Acrylic Smooth exterior paint of required shade on newly plastered wall surfaces @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified. |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 20 | S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc and similar work conforming Fe 290 (Gde E- 165) including working platform/scaffolding complete all as specified & directed by Engr-in-Charge |
| 21 | Fabrication and erection fixing only rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc and similar work conforming Fe 290 (Gde E- 165) including working platform/scaffolding complete all as specified & directed by Engr-in-Charge |
| 22 | M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-charge |
| 23 | M&L preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 24 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 25 | M&L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern correspondings to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and directed. |
| 26 | Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 27 | M&L for filleting in any position and to any shape of section area not exc 25 sq cm in cement sand mortar 1:4 including all mitres, stops etc complete all as specified and as directed. |
| 28 | Supply and fixing 10mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified and directed. |
| 29 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 30 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 32 | M & L for cement concrete type C2 1:3:6 (20mm graded stone aggregate) in foundations,filling and mass concrete complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender