Tender For special Repair To Cook House (Bldg No Bi-1 Ak) Of Grn Bn Inside Vijay Durg Under Ge(Vd) Kolkata
Tender Value
39 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
20 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Cook House (Bldg No Bi-1 Ak) Of Grn Bn Inside Vijay Durg Under Ge(Vd) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land complete all as specified and directed. |
| 2 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in1:4 cement mortar complete all as specified and directed. |
| 3 | M &L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified. |
| 4 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1: 6 finished fair & even & smooth without using extra cement, all as specified and directed. |
| 7 | M&L rendering 10 mm thick on fair faces of brick work/concrete surfaces in CM 1: 6 finished fair & even & smooth without using extra cement, all as specified and directed. |
| 8 | M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. complete all as specified and directed. ( Note -W.P.C. shall be measured and paid separetly . ) |
| 9 | Supply only integral water proofing compound all as specified and as directed. |
| 10 | M&L for preparation of new surfaces and applying two coats of OBD over alkali resistant primer after applying 3 mm thick wall care putty on walls, all as specified and directed. |
| 11 | M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc by cleaning, brooming, rubbing and scrapping as required using broom, emery paper putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt headgear etc, finishing the surface with 1mm thick exterior wall putty for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 13 | M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:4 all as specified and directed. |
| 14 | All as per item no 13 but using as skirting/dado including screed bed10 mm thick for wall tiling etc. in CM 1:3. |
| 15 | M&L for Vitrified Ceramic tiles 8 to10 mm thick light shade (of square shape) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:4 all as specifed and directed. |
| 16 | All as per item no 15 but using as skirting/dado including screed bed10 mm thick for wall tiling etc. in CM 1:3. |
| 17 | M&L for Glazed ceramic tiles in vertical surface 450X 300X 7/600x 300x 7/350X250X6-7mm thick as on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed in colour cement to match including screed bed10 mm thick for wall tiling etc. in CM 1:3. complete all as specified. |
| 18 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified. |
| 19 | M&L for 18-20 mm thick Granite slab of approved quality (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick for laying floor finishes in CM 1:4.as specified. |
| 20 | M&L for Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. completeall as specified. |
| 21 | M&L kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer or mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed. |
| 22 | M&L kota stone slab flooring 18-20 mm thick in riser of steps,skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick for in CM 1:4 for wall tiling etc. complete all as specified and directed. |
| 23 | M&L cement concrete 1:4:8, type D2 using 40 mm graded aggregate as in sub base for floor complete all as specified and directed. |
| 24 | M&L 25 mm thick cement concrete 1:2:4 , type B0 using 12.5 mm graded aggregate as in sub base for floor complete all as specified and directed. |
| 25 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 26 | Demolition of cement concrete (reinforced ,reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for. |
| 27 | M&L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. All as specified and directed. |
| 28 | M&L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate)Beams, cantilevers, bressummers, lintels over 1.5m span and the like. All as specified and directed. |
| 29 | M&L for Formwork to for fair finished surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 30 | S&F Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 31 | All as per item No 30 above, but 6mm to 8mm dia. |
| 32 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including roof coverings complete all as specified and directed. |
| 33 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc., complete all as specified and as directed. |
| 34 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc., complete all as specified and as directed. |
| 35 | M&L 1.00 mm thick Plain, black, mild steel sheeting, in wall cladding, steel gates,in ridges, hips, valley gutters, drip and straight flashings and similar work cut to size, holes punch headed screws clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitred angle etc are required complete all as specified and directed. |
| 36 | Cutting Holes in brick walls in cement mortar for inserting holdfast ,pipes or steel sections and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n exc one brick etc. all as specified and directed. |
| 37 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. all as specified |
| 38 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe 410W (Gde E-250) quality 'A' etc complete all as specified and directed. |
| 39 | M&L welded steel wire fabric weight n exc 4 kg/sqm complete and fixed to wood or steel members, all as specified and directed. |
| 40 | M&L for preparation of old painted steel & iron surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and as directed |
| 41 | M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 42 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm each and not exceeding 4 sqm removing from the site complete all as specified and directed. |
| 43 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed. |
| 44 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified |
| 45 | Providing and fixing factory made uPVC white color Sliding window (area n exc 2.00 sqm each).Two track two sash with one flyscreen made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose). |
| 46 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 47 | M&L 5 mm thick Toughned glass as in hinged doors, partitions, windows, automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified |
| 48 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, wooden flooring of any thickness including cover fillets complete all as specified Please Enable Macros to View BoQ information |
| 49 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, wooden flooring of any thickness including cover fillets complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2016
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender