Tender For Provn Of 250M Rd And Hard Standing Of Ksp At Bawa Gate, Hoshiar Enclave (Ctc Lines) At Morar Cantt, Gwalior
Tender Value
43 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
25 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 250M Rd And Hard Standing Of Ksp At Bawa Gate, Hoshiar Enclave (Ctc Lines) At Morar Cantt, Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | M&L earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan (including getting out and disposal of excavated earth upto 500 m from site and and lift upto 1.5 m complete all as specified and directed by GE. |
| 2 | M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 3 | M&L for 200mm thick Soling (or sub base) with broken stone boulders or quarried stone interstics filled, surface formed and rolled & consolidated with 8 to 10 tone power roller to required gradient & camber complete all as specified & directed. |
| 4 | M &L for Laying and compacting 150 mm thick in two layers of 75mm each(compacted thickness) Wet Mix Macadam (WMM) grading table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paverand rolling with vibratory roller of capacity 80-1OOKN static weight and consolidating to required gradient and camber complete all as specified and directed.The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and bridge works 2013. |
| 5 | M&L for preparing unsurface (WMM ) by brushing with wire brushes for removing caked mud et, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly over serface of WMM a priming/tack coat with paving bituminous primer at 10 kg per 10 sq metre complete all as specified and as directed. |
| 6 | M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 50-75 mm) with paving bitumen VG-40 of 4% by weight of total mex complete all as directed by Engr in charge. |
| 7 | M&L for bitumenous semi dense Asphastic concrete 40mm consolidated thickness using 5.5% of binder content by weight of total mix using paving bitumen VG-40 laid/Spread uniformly by means of mechanical paver over black top surfaces and rolled with 8 to 10 ton power roller and compacted to required gradient and camber complete all as specified and as directed |
| 8 | M&L for Rough dressed sand stone, 40mm thick laid dry but bedded, jointed and pointed in CM 1:3 in vertical surface as in edge stone in road berm complete all as specified and directed |
| 9 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed |
| 10 | S&F Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 11 | S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 65mm) of high effciency mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed. |
| 12 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 13 | M&L for Hardcore of gauge n exc. 63 mm broken stone boulders, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 14 | M&L for 100 mm thick PCC Type D2 (1:4:8) using 40mm graded stone aggregate), complete all as specified and directed. |
| 15 | M&L for PCC 1:1/2:3 using 20mm graded stone aggregate), (100 mm thick) laid in panel and mixed with metalic floor Hardner (Paid separately) complete all as specified and directed. |
| 16 | M&L for Metallic floor hardener @ 5% of by weight of cement used in top PCC flooring |
| 17 | M&L for forming construction joint (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' for 100 mm thick concrete slab complete all as specified and as directed by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender