Tender For Running And Maintenance Of Dda Roshanara Club.Sub Head : - Running, Maintenance And Operation Of Auto Irrigation System At Dda Roshanara Club.
Tender Value
14.36 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
5 days left
EMD
28732
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Running And Maintenance Of Dda Roshanara Club.Sub Head : - Running, Maintenance And Operation Of Auto Irrigation System At Dda Roshanara Club.
BOQ
| Sl. No. | Item Description |
| 1 | Operational of irrigation system installed as per inventory and additional conditions attached by deploying the following staff. a) Operator – 1 nos. (one no. in 10AM to 6 PM )b) Khallasi -1 nos. (one no. in 10AM to 6 PM). shift may be change as per direction of Engineer-in-Charge. |
| 2 | Providing & Replacement of Gear Driven Pop up Sprinkler with ABS Riser with 3/4\\" inlet , 5\\" Riser, capable of delivering 0.15 - 0.63 lps dia of coverage of 23.2 - 30.6 m at 2.04 - 5.0 bar with trajectory of throw 26°, having Top graduated arc adjustment , arc memory clutch, reversing mechanism, Arc recall, Full & Part Circle adjustments in 1, Heavy Duty rubber cover which seals out dirt and increase product durability with swing Joint. etc complete as required. |
| 3 | Providing & replacement of Gear Driven Pop up ( For Large Lawn) capable of delivering 0.32- 1.84lps with radius of coverage from 13.7-22.0m at 2.0 - 6.2bar. The sprinkler shall be available with six (6) numerically coded nozzles with a trajectory of 26°. The sprinkler shall be adjustable in both part circle and a true full continuous 360° circle configuration. The adjustable part circle unit shall be minutely adjustable from 40° to 360°. The sprinkler shall have a top arc adjustment carried out by rotation of a flat blade screwdriver within the top cover. The sprinkler shall have an arc indication arrow on the top of sprinkler displaying the coverage pattern set. The sprinkler shall also have a friction-clutch mechanism to allow for 360°+ forward or reverse movement of nozzle turret without damage to the internal gear components. Sprinkler shall have a memory arc clutch feature to allow original arc pattern to be automatically resumed following disturbance to nozzle turret. The adjustable unit shall beadjustable in all phases of installation (i.e., before installation, after installation while static, and after installation while in operation). The features of pop-up should be: i) ABS Riser having 1\\" inlet & 4\\" Riser Height .ii)Arc memory clutch with position recall. iii) Top Arc Adjustment with Graduated Arc Set Degree Marking on top. iv) Reverse Mechansism.v) Optional Check Valve for Elevation Difference. etc complete as required. |
| 4 | Providing & Replacement of Valve box 12\\" Rectangular Valve Box with cover. The valveboxes shall be high strength, high density polyethylene constructed material. It should be UVstabilizer with anti oxidants, resistant to moisture. Etc complete as required. |
| 5 | Providing & Replacement of 2\\" BSP Straight flow Solenoid valve with victaulic grooved coupling flow control and \\"pressure regulation unit\\" which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners andcomponents. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for \\" tamper proof\\" operation. The valve shall operate with minimum 24 VAC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removablefrom the top of the valve without disturbing the valve installation. etc complete as required . |
| 6 | Providing & Replacement of 3 way pilot operated Quick Pressure relief valve size 2\\" along with bypass arrangement.. It shall be adjustable Pressure setting from 21 PSI - 130 PSI for maximize performance. It has 3 way pilot with 4 ports of the size 1/8\\"-28 BSP at a temperature of 60 degree celsius. It should be made of high strength engineering plastic with great durability and corrosion resistance. Its pilot has glass reinforced plastic base and cap for streangth, Pilot has a max height of 155 mm and width of 69 mm. etc complete as required |
| 7 | Providing & Replacement of 3\\" butterfly valve made of hybride plastic.It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bidirectional smooth operation. The hydraulic body test pressure of the PVC buffer type Butterfly Valve is 10 bar and hydraulic seat test pressure of the product is 8 bar.etc complete as required. |
| 8 | Providing & Replacement of uPVC conforming to IS:4985 :2000 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including the earth work of 150 mm wide and 450 mm deep. etc complete as required . |
| 9 | 90 mm 10 kg/cm2 |
| 10 | 75 mm 10 kg/cm2 |
| 11 | 63 mm 6 kg/cm2 |
| 12 | 50 mm 6 kg/cm2 |
| 13 | 40 mm 6 kg/cm2 |
| 14 | Providing & Replacement of Solenoid latch of Power out put 24V AC, 1.0 Amp. Etc complete as required. |
| 15 | Providing & replacement of automatic Fogging system with 4 way fogger of 28lph at 4 bar along with 16 mm LLDP line with ball valve and LPD with Sequential controller of input 220V and on and off time 0-999 mintus .etc complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender