Tender For Provn Of Drone Protection Nets For Blast Pens At Af Stn Nal Under Ge (Af) Nal
Tender Value
73 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
27 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Drone Protection Nets For Blast Pens At Af Stn Nal Under Ge (Af) Nal
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC any description in any position not otherwise specially provided for and removel of excavated material, complete all as specified and as directed. |
| 2 | Excavation by mechanical means (hydraulic excavator means) in foundation, trenches or drains (n exc 1.5m in width or 10 sqm on plan) including getting out of any kind of soil and disposal of excavated earth lead upto 50m and lift upto 1.50m as directed. |
| 3 | Material and labour for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations, filling in mass concrete etc complete all as specified and directed. |
| 4 | Returing filling in including spreading, levelling, watering and well ramming in layers n exc 25cm thick as in soft/ loose soil complete all as specified and directed. |
| 5 | Removing excavated material exc 1.50 km but n exc. 5 km and deposting where directed |
| 6 | Form work of rough finished flat surface to side of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, and similar work vertical or to batter. |
| 7 | Form work of fair finshed flat surface to sides of pillars, posts, struts, piers, columns and stanchions. |
| 8 | M&L for RCC M-25 design mix for foundation including rafts, footings, foundation beams, plint beam, base of columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 9 | M&L for RCC M-25 design mix for columns, pillers, piers, posts and struts. |
| 10 | M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, including as in lacing to complete all as specified and directed. |
| 11 | M & L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 12 | S & F for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed. |
| 13 | M & L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, concrete surfaces, water trough and like including rounded or charmfered on edgesconfirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed. |
| 14 | Material and labour for mild steel screw bolts, purpose made, with hexagonal or square heads at one end and screwed the other, or screwed both ends, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long, diameter of neck exc 20mm n exc 25mm, complete all as specified and directed. |
| 15 | S & F for bands, straps, supports or stays for columns, including welding or bolts, hooks (stay), hook and clamps; hold fasts; wall tie; hooks for conforming to Fe-290 Gde-165, complete all as specified and directed. |
| 16 | M & L for preparation of new steel & iron surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete as specified and directed. |
| 17 | S & F for nylon net woven out of nylon thread (virgin quality) of 3mm dia and size of mesh 25mm control UV stabilized multi filament including steel rings with tying rope attached, complete all as specified and directed. |
| 18 | S & F cast iron work grade FG 150, machined, in pulleys and similar articles ,complete all as specified and directed. |
| 19 | S & F for 12.50mm dia nylon rope, complete all as specified and directed. |
| 20 | S & F for 4.0mm dia galvanised mild steel plain wire, complete all as specified and directed. |
| 21 | S & F for 5.0mm dia galvanised steel chain link hemming/tension wire, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender