Tender For Repair/Maint Of Internal Electrification Work And Replacement Of Old Unsv Submain Wiring, Dbs Various Types Of Led Fitting & Fixtures For Otm Accn At Anand Parbat Mil Stn Under Ge(North) Delhi Cantt.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Internal Electrification Work And Replacement Of Old Unsv Submain Wiring, Dbs Various Types Of Led Fitting & Fixtures For Otm Accn At Anand Parbat Mil Stn Under Ge(North) Delhi Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete |
| 2 | M&L for point wiring with single core FRLSH, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) PVC Conduit/casing caping including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :- |
| 3 | (a) One light point controlled by one switch |
| 4 | (b) One ceiling/exhaust fan point controlled by one switch |
| 5 | (c) One socket outlet 5 Amps controlled by one switch on same board |
| 6 | (d) One socket outlet 5 amps controlled by one switch on independent board |
| 7 | (e) One bell point controlled by one bell push switch |
| 8 | (f) One light point controlled by two two way switches |
| 9 | All as per above item but wiring with 2.5sqmm copper wire and 1.5sqmm earth wire for socket out let 16 Amps on independent board |
| 10 | All as per above item but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 sq mm PVC insulated unsheathed copper cable as earth continuity conductor |
| 11 | M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic suitable size PVC conduit complete with all PVC conduit accessories suitable for modular type switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- (Note: 1. Rates deemed to be included for GI metal flush box reqd modulars size, Modular cover inner and outer plates, blanking plates etc complete 2. Modular switch, sockets, Bell push measured and paid separately under relevant items). |
| 12 | (a) One light point controlled by one switch |
| 13 | (b) One ceiling/exhaust fan point controlled by one switch |
| 14 | (c) One socket outlet 5 Amps controlled by one switch on same board |
| 15 | (d) One socket outlet 5 amps controlled by one switch on independent board |
| 16 | (e One bell point controlled by one bell push switch |
| 17 | All as per above item but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire. |
| 18 | All as per above item but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4.0 sq mm PVC insulated unsheathed copper cable as earth continuity conductor |
| 19 | S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete |
| 20 | S&F Switch piano flush type 15/16 A single pole one way 230 Volts complete |
| 21 | S&F Socket Outlet 2 in 1, 3/5 pin 5 Amps flush type 230 Volt complete |
| 22 | S&F Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete |
| 23 | S&F 2 way switches 5 Amps 230 Volts complete |
| 24 | S/F Bell push, flush type 5 Amps 230 Volts complete |
| 25 | S&F electronic fan step regulator flush type 120 watt, 230 Volt complete |
| 26 | S&F ding dong bell, AC, 230 volts, single pole complete |
| 27 | S&F lamp holder, 230 volt AC, PVC / Polycarbonate type of angular shape with back plate suitable for batten fittings complete |
| 28 | S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete. |
| 29 | S&F modular switch 6 Amps, one way, one module 240 volts complete |
| 30 | S&F modular socket, 3/5 pin 6 Amps,240 volts, 2 module complete |
| 31 | S&F modular switch 16 A, 1 module,240 volts complete |
| 32 | S&F modular socket 6/16 A, 5/6 pin, 2 module, 240 volts complete |
| 33 | S&F modular Bell push 6 Amps, one module 240 volts complete |
| 34 | S&F modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete |
| 35 | S & F in repair sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps. |
| 36 | M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area 1100 V,stranded copper conductor, multistranded, and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete |
| 37 | All as per above item herein before but with 6 sqmm two runs and 6 sqmm one run as earth wire |
| 38 | All as per above item herein before but with 10 sqmm two runs and 10 sqmm one run as earth wire |
| 39 | M&L Pointing wiring in Existing conduit with 1.5 Sqmm (nominal area) PVC insulated,(FRLS) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20/25 mm dia (concealed) conduit including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover for one light/fan/5 Amp socket all as specified and directed. |
| 40 | M&L Pointing wiring in Existing conduit with 2.5 Sqmm (nominal area) PVC insulated,(FRLS) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20/25 mm dia (concealed) conduit including one run of 2.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover for 15 Amp socket all as specified and directed. |
| 41 | S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, 4 way IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following :- |
| 42 | All as per above but 8 way |
| 43 | All as per above but 12 way |
| 44 | S&F of factory made distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, concealed type with suitable bus bar, neutral link, earth link suitable complete |
| 45 | S&F of loadline distribution box 4 way, AC, TP & neutral metal enclosure, glazed double dooor, 415V AC, IP-43, concealed type with IP-43 protection complete with suitable bus bar, neutral link, earth link suitable for MCCB 125/160 Amps as incomer and MCB SP as out going all as directed. |
| 46 | S&F in repairs for MCB TPN, 240 Volts, AC, 40/63 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete |
| 47 | S&F in repairs for MCB, DP/SPN, 240 Volts, AC, 40/63 Amps of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and directed. |
| 48 | All as per above item but 16 to 32 Amps |
| 49 | S&F in repairs for MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete |
| 50 | S&F in repairs for MCCB 4 Pole, 415 volt, AC,63 amps,fixed type,suitable for load line DB/LT PB connection complete all as specified and directed. |
| 51 | All as per above item but 100 amps, 25 kA |
| 52 | M&L in replacement for box type board made out of polycarbonate, incl fixing with 5 Amps switch&socket complete. |
| 53 | M&L in replacement for box type board made out of polycarbonate, incl fixing with 5/15 Amps switch&socket complete. |
| 54 | S & F LED Batten type fitting for surface/wall mounted 20/22 W,230V, CDL/Warm type integrated electronic driver completely pre wired, LED 4 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed. |
| 55 | S & F LED Batten type fitting for surface/wall mounted 9/10W,230V,CDL/Warm type integrated electronic driver completely pre wired, LED 2 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed. |
| 56 | S&F surface/recess mounted LED panel type 36W,230V complete with driver full window glarefree opal diffuser LED panel of size 2ftx2ft with CRCA powder coated white housing, CDL/warm type illumination complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. |
| 57 | S&F surface/recess mounted LED panel type 36W,230V complete with driver full window glarefree opal diffuser LED panel of size 4ftx1ft with CRCA powder coated white housing, CDL/warm type illumination complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. |
| 58 | S&F lighting fixture wall mounted LED bulk head luminaire 10W,230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting Brackets & accessories as required with connections and remove the UNSV fittings and all as specified and directed. |
| 59 | Supply and fixing Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 12/15 Watt, CDL/Warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. |
| 60 | Supply and fixing Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 5/6 Watt, CDL/Warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. |
| 61 | S&F in repairs for LED type IP 66, bush light with die cast aluminium having with toughened glass 9 W incl fixing arrangements complete all as specified and directed. |
| 62 | S&F LED energy saving industrial type tube light fitting for capacity 36/40watt,IP65 with high efficancy integrated electronic driver complete including connection from ceiling rose to light fitting with suitable size of connection cable complete all as directed.Make :Havells |
| 63 | Supply and fix LED energy saving High bay light fitting for capacity 120watt, 100lm/W with toughened glass, SMD LED with pressure die -cast aluminium housing with integrated lens polycarbonate cover complete with all connected and fitting accessories including connection from ceiling rose to light fitting with suitable size of connection cable including taking down old fittings complete all as specified. Make : Havells Cat Part No GAZELLAHBV2P120WLED857PBOTGGRY and Eqivelant Crompton/Bajaj |
| 64 | Supply and fix LED energy saving well glass light fitting for capacity 70watt, Environmental friendly, energy saving long life corrosion resistant, vertical surface mounting pressure die-cast aluminium housing (light engine) well glass luminaires with high power LED as light source with all connected and fitting accessories including connection from ceiling rose to light fitting with suitable size of connection cable including taking down old fittings complete all as specified. Make : Havells Cat Part No ENDURAWELLGLASSGENXP70WLED757PPC and Eqivelant Crompton/Bajaj |
| 65 | Supply and fix LED building security street light 30/45 made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 incuding drivers, connecter block etc complete pre wired & connecting up with suitable twin core flexble copper wire and suitable bracket all as per dirtected including taking down old light complete all as specified. |
| 66 | Supply and fix Flood light luminaries LED energy saving 50 Watt LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light luminaire high power LED in single piece deep drawn housing complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directed by Engineer in Charge including connection from juction box to lilght fittings with 1.5 Sqmm 2 single core PVC insulated and unsheather, multi stranded FRLS copper conductor cable drawn in flexible conduit including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge |
| 67 | Supply and fix Flood light luminaries LED energy saving 120 Watt LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light luminaire high power LED in single piece deep drawn housing complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directed by Engineer in Charge including connection from juction box to lilght fittings with 1.5 Sqmm 2 single core PVC insulated and unsheather, multi stranded FRLS copper conductor cable drawn in flexible conduit including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge |
| 68 | Material and labour for Providing tripod maintenance free earth pits using Ground enhancing compound of 25 Kg (Min) ,earth electrode of copper rod /copper bonded steel rod of 2 mtr length (min) & 17.2mm dia complete with test links for cable connection/disconnection,inspection chamber,top cover including excavation,refilling etc complete all as specified and directed.Make: M/S Ashlok or equivalant |
| 69 | Supply and fixing earth continuity conductor or main earth lead fixed to wall on batten or recess or chess or buried in ground drawn in conduit/pipe or fixed to the pole or any other situation for loop earthing etc with insulator as required 20x3mm copper strip all as specified and directed. |
| 70 | Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed by Engr-in-Charge |
| 71 | Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of 4 mm dia as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as specified and as directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender