Tender For To Carry Out Daily Operation, Maintenance, Repair, Improvement And Renewal Of Street Light System In Kalamboli Town And Villages Under Panvel Municipal Corporation Area As Well As Roadpali, Khidukpada Limits For A Period Of Three Years.
Tender Value
4.05 Crore
Estimated cost
Bid Submission
13 Nov 2026
14 days left
EMD
2.02 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for To Carry Out Daily Operation, Maintenance, Repair, Improvement And Renewal Of Street Light System In Kalamboli Town And Villages Under Panvel Municipal Corporation Area As Well As Roadpali, Khidukpada Limits For A Period Of Three Years.
BOQ
| Sl. No. | Item Description |
| 1 | PART – B : ROUTINE MAINTENANCE, REPAIRS, RENOVATION & INSTALLATION OF NEW STREET LIGHT AND POWER SUPPLY RELATED WORK (BIDDABLE PART) |
| 2 | Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 3 | Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 4 | Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV |
| 5 | Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV |
| 6 | Supplying and erecting integrated LED street light fitting 18 to 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/FLS2. |
| 7 | Supplying and erecting integrated LED street light fitting 23 to 25W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 2300 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3Years warranty as per specification No FG-ODF/FLS2. |
| 8 | Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 9 | Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 10 | Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 11 | Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 12 | Supplying and erecting integrated LED street light fitting 85-90W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 9300 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 13 | Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 14 | Supplying and erecting integrated LED street light fitting 120W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 13000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 15 | Supplying and erecting integrated LED street light fitting 130-140W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 15600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/FLS2 |
| 16 | Supplying and erecting integrated LED street light fitting 160-170W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 19000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/FLS2. |
| 17 | Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 18 | Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 19 | Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 20 | Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 21 | Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2. |
| 22 | Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2. |
| 23 | Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 , including driver complete with 2 Year warranty as per specification No FGODF/FLS2. |
| 24 | Supplying and erecting Gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FGODF/GLT |
| 25 | Supplying and erecting Gate/garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FGODF/GLT |
| 26 | Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FG-ODF/PTL |
| 27 | Supplying & erecting integral post top lantern fixtures (globe type) suitable for LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FGODF/PTL |
| 28 | Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL |
| 29 | Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC |
| 30 | Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC |
| 31 | Supplying and erecting street light Wall bracket made from 25 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB |
| 32 | Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB |
| 33 | Supplying and erecting Street light bracket for erection of Single fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC |
| 34 | Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FGBKT/BPC |
| 35 | Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC |
| 36 | Supplying and erecting Street light bracket for erection of Double fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC |
| 37 | Supplying and erecting condenser for MV/SV/MH lamp 150W,230V as per specification no. FG-FG/AS7 |
| 38 | Supplying and erecting condenser for MV/SV/MH lamp 250W,230V as specification no. FG-FG/AS7 |
| 39 | Supplying and erecting condenser for MV/SV/MH lamp 400W,230V as specification no. FG-FG/AS7 |
| 40 | Supplying and erecting electronic ignitor suitable for 230V metal halide lamp 70/150/250/400W (integral or non integral type luminaires as specification no. FG-FG/AS6 |
| 41 | Supplying and erecting VPIT heavy duty copper wound ballast 230V for 80- 150W HPSV/MV/MH as per specification no. FG-FG/AS5. |
| 42 | Supplying and erecting VPIT compound heavy duty copper wound ballast for 230V for 250W HPSV/MV/MH as per specification no. FG-FG/AS5. |
| 43 | Supplying and erecting VPIT heavy duty copper wound ballast for230V for 400W HPSV/MV/MH as per specification no. FG-FG/AS4. |
| 44 | Supplying and erecting electronic type Driver for Outdoor LED Fittings upto 25W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. |
| 45 | Supplying and erecting electronic type Driver for Outdoor LED Fittings 26W-45W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. |
| 46 | Supplying and erecting electronic type Driver for Outdoor LED Fittings 46W-75W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD |
| 47 | Supplying and erecting electronic type Driver for Outdoor LED Fittings 76W-100W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD |
| 48 | Supplying and erecting electronic type Driver for Outdoor LED Fittings 101W-150W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD |
| 49 | Supplying and erecting electronic type Driver for Outdoor LED Fittings 151W200W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<1 |
| 50 | Supplying and erecting HPSV lamp 3 pin BC/Screwed cap head / pin type 230V, 70 W SON type. |
| 51 | Supplying and erecting HPSV lamp 3 pin BC/Screwed cap head /pin type 230V, 150 W SON type. |
| 52 | Supplying and erecting HPSV lamp 3 pin BC/Screwed cap head /pin type 230V,250 W SON type. |
| 53 | Supplying and erecting Metal Halide lamp double ended 230V, 250 W. |
| 54 | Supplying and erecting Metal Halide lamp double ended 230V, 400 W. |
| 55 | Supplying and erecting quartz electronic time switch having 24 hour dial to work on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating up to 16A to use independently or in conjunction with contactor. |
| 56 | Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” and switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230 V / 10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box. |
| 57 | Supplying and erecting four pole power contactor 430 V, 40 A for time switch complete erected on provided wooden block/ box, with necessary materials. |
| 58 | Supplying and erecting triple pole mini feeder pillar with 500V, 200A FPMCCB as incomer and 2 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles, self locks, gasket having IP54,IK10 protection and slanting top to be erected on provided foundation complete as per specification no. SWSWR/MFP |
| 59 | Supplying and erecting triple pole mini feeder pillar with 500V, 300A FPMCCB as incomer and 3 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles, self locks, gasket having IP54,IK10 protection and slanting top to be erected on provided foundation as per specification no. SW-SWR/MFP |
| 60 | Supplying & erecting single phase, 240V, street light control panel up to the max load of 6kW, SPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame/ CC foundation. |
| 61 | Supplying & erecting single phase, 240V, street light control panel up to the max load of 12kW, SPN MCB 63A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation & overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 62 | Supplying & erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 63 | Supplying & erecting three phase, 415V, street light control panel up to the max load of 12kW, TPN MCB 63A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 64 | Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 65 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 66 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 67 | Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 68 | Supplying, erecting & marking SPMCB 40A to 63A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 69 | Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 70 | Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 71 | Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 72 | Supplying, erecting & marking DPMCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 73 | Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 74 | Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 75 | Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 76 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 77 | Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 78 | Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 79 | Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 80 | Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 81 | Supplying and erecting porcelain base iron clad cut out HC type 415V, 32A erected on polished wooden block. |
| 82 | Supplying and erecting porcelain base iron clad cut out HC type 415V, 63A erected on polished wooden block. |
| 83 | Supplying and erecting porcelain base iron clad cut out HC type 415V, 100A erected on polished wooden block. |
| 84 | Supplying and erecting porcelain base iron clad cut out HC type 415V, 200A erected on polished wooden block. |
| 85 | Supplying & erecting fuse bridges with base HC type fuse links 240V, 63A erected on polished wooden block. |
| 86 | Supplying & erecting fuse bridges with base HC type fuse links 415V, 100A erected on polished wooden block. |
| 87 | Supplying & erecting fuse bridges with base HC type fuse links 415V, 200A erected on polished wooden block. |
| 88 | Supplying & erecting HRC fuse cartridge 415V, 32A |
| 89 | Supplying & erecting HRC fuse cartridge 415V, 63A |
| 90 | Supplying & erecting HRC fuse cartridge 415V, 100A |
| 91 | Supplying and erecting terminal spreaders suitable for 3 pole, up to 100A MCCB (set of 6) |
| 92 | Supplying and erecting terminal spreaders suitable for 3 pole, up to 250A MCCB (set of 6) |
| 93 | Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set of 8) |
| 94 | Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8) |
| 95 | Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB. |
| 96 | Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. |
| 97 | Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 |
| 98 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 99 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 100 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 101 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 102 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 103 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 104 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 105 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 106 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no. CB-LT/AL |
| 107 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 108 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 109 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 110 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 4 core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 111 | Cable fault detection for all types of LT underground cable from 16sq. mm. to 400 sq. mm. by acoustic method by using surge wave tester & surge wave receiver (Duo phone) up to 250 meter length cable with recording results & submission of test reports. |
| 112 | Cable fault detection for all types of LT underground cable from 16 sq. mm. to 400 sq. mm. by acoustic method by using surge wave tester & surge wave receiver (Duo phone) 251 meter to 500 meter length cable with recording results & submission of test reports. |
| 113 | Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification No. CB-JT/LT |
| 114 | Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification No. CB-JT/LT |
| 115 | Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 70 to 95 sq mm., with necessary material as per specification No. CB-JT/LT |
| 116 | Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 120 to 185 sq. mm., with necessary material as per specification No. CB-JT/LT |
| 117 | Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 240 sq.mm., with necessary material as per specification No. CB-JT/LT |
| 118 | Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 300 sq mm., with necessary material as per specification No. CB-JT/LT |
| 119 | Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification No. CB-JT/LT |
| 120 | Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification No. CB-JT/LT |
| 121 | Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 70 to 120 sq mm., with necessary material as per specification No. CB-JT/LT |
| 122 | Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 150 to 185 sq mm., with necessary material as per specification No. CB-JT/LT |
| 123 | Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 240 to 300 sq mm., with necessary material as per specification no. CB-JT/LT |
| 124 | Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE |
| 125 | Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE |
| 126 | Supplying & erecting G.I. pipe ‘A’ class 50 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE |
| 127 | Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE |
| 128 | Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 129 | Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 130 | Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 131 | Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 132 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 133 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 134 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 135 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 136 | Making Horizontal Directional Drill / Bore of 150 mm dia and depth up to 1.5 mtr in soft soil and laying 150 mm HDPE/GI pipe etc. complete as per specification no. CW-EXN-CTR |
| 137 | Supplying & erecting single compression type brass cable glands for 2 to 4 core 2.5 sq mm /2 to 4 core 4 sq mm /2 core 6 sq mm for XLPE armoured cable as per specification No. CB-GL |
| 138 | Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cable as per specification No. CB-GL |
| 139 | Supplying & erecting single compression type brass cable glands for 3 to 4 core 16 sq mm /3 to 4 core 25 sq mm /3 core 35 sq mm for XLPE armoured cable as per specification No. CB-GL |
| 140 | Supplying & erecting single compression type brass cable glands for 4 core 35 Sq.mm./3 core 50 Sq.mm. for XLPE armoured cable as per specification no. CB-GL |
| 141 | Supplying & erecting single compression type brass cable glands for 4 core 50 sq mm for XLPE armoured cable as per specification No. CB-GL |
| 142 | Supplying & erecting single compression type brass cable glands for 3½ core 70 sq mm for XLPE armoured cable as per specification No. CB-GL |
| 143 | Supplying & erecting single compression type brass cable glands for 3½ core 95 sq mm for XLPE armoured cable as per specification No. CB-GL |
| 144 | Supplying & erecting single compression type brass cable glands for 3½ core 120 sq mm for XLPE armoured cable as per specification No. CB-GL |
| 145 | Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB |
| 146 | Supplying & erecting FRP box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB |
| 147 | Supplying & erecting crimping type copper lugs for cable up to 16 sq mm complete as per specification No. CB-CL/CU |
| 148 | Supplying & erecting crimping type copper lugs for cable 25 sq mm complete as per specification No. CB-CL/CU |
| 149 | Supplying & erecting crimping type copper lugs for cable 35 sq mm complete as per specification No. CB-CL/CU |
| 150 | Supplying & erecting crimping type copper lugs for cable 50 sq mm complete as per specification No. CB-CL/CU |
| 151 | Supplying & erecting crimping type copper lugs for cable 70 sq mm complete as per specification No. CB-CL/CU |
| 152 | Supplying & erecting crimping type copper lugs for cable 95 sq mm complete as per specification No. CB-CL/CU |
| 153 | Supplying & erecting crimping type copper lugs for cable 120 sq mm complete as per specification No. CB-CL/CU |
| 154 | Supplying & erecting crimping type aluminium lugs for cable up to 16 sq mm complete as per specification No. CB-CL/AL |
| 155 | Supplying & erecting crimping type aluminium lugs for cable 25 sq mm complete as per specification No. CB-CL/AL |
| 156 | Supplying & erecting crimping type aluminium lugs for cable 35 sq mm complete as per specification No. CB-CL/AL |
| 157 | Supplying & erecting crimping type aluminium lugs for cable 50 sq mm complete as per specification No. CB-CL/AL |
| 158 | Supplying & erecting crimping type aluminium lugs for cable 70 sq mm complete as per specification No. CB-CL/AL |
| 159 | Supplying & erecting crimping type aluminium lugs for cable 95 sq mm complete as per specification No. CB-CL/AL |
| 160 | Supplying & erecting crimping type aluminium lugs for cable 120 sq mm complete as per specification No. CB-CL/AL |
| 161 | Supplying & erecting crimping type aluminium lugs for cable 185 sq mm complete as per specification No. CB-CL/AL |
| 162 | Supplying & erecting crimping type aluminium lugs for cable 300 sq mm complete as per specification No. CB-CL/AL |
| 163 | Supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2 m ) length respectively and total 9 m long with pole cap, base plate in provided foundation (weight 147 kg) as per specification no. OH-PL/STP |
| 164 | Supplying and erecting ISI mark G.I. pipe pole ‘B’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP |
| 165 | Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OHPL/HM (excluding luminaries) |
| 166 | Supplying and erecting 16 m (clear height) motorized high-mast (Top-150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3 mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum winch assembly 350 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete. specification no. OH-PL/HM (excluding luminaries) |
| 167 | Supplying and erecting 16 m (clear height) motorized high-mast (Top-150mm, Bottom-410 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3 mm thickness, with base plate 25 mm thick x OD 570 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 350 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete. specification no. OHPL/HM (excluding luminaries) |
| 168 | Supplying and erecting 20 m (clear height) motorized high-mast (Top-150mm, Bottom-410 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3+3 mm thickness, with base plate 25 mm thick x OD 570 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 500 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete specification no. OH-PL/HM (excluding luminaries) |
| 169 | Supplying and erecting 20 m (clear height) motorized high-mast (Top-150mm, Bottom-460 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3+4 mm thickness, with base plate 25 mm Thick x OD 670 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel -316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 500 kg, 5x2.5 sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete. specification no. OH-PL/HM (excluding luminaries) |
| 170 | Supply and erecting 9m (clear height) Fixed type high-mast (Top-100mm, Bottom- 200mm) with hexagonal /round bracket and foundation bolts suitable for max. 4 nos. flood light fixtures on provided foundation as per specification no. OH-PL/OPL (excluding luminaires). |
| 171 | Providing & erecting 5 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL. |
| 172 | Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 173 | Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no.OH-PL/OPL. |
| 174 | Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 175 | Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 176 | Providing & erecting 10 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 175 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 177 | Providing & erecting 11 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 210 mm A/F, top 90 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 178 | Providing & erecting 12 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 240 mm A/F, top 90 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 179 | Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT |
| 180 | Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT |
| 181 | Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. (Rates are inclusive of foundation.) |
| 182 | Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, , IP 54 and IK10 protection, 45 A TP contactor for automatic switching of luminaires, 2 no 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. (Rates are inclusive of foundation.) |
| 183 | Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. |
| 184 | Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. |
| 185 | Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 186 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 187 | Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI |
| 188 | Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA |
| 189 | Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP |
| 190 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 191 | Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. |
| 192 | Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR |
| 193 | Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR |
| 194 | Making trench in soft soil having 0.9m depth and minimum 0.3 m width as per IS for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification No. CW-EXN-CTR |
| 195 | Making trench in hard murum/Tar road having 0.9 m depth and minimum 0.3mtr width for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification No. CW-EXN-CTR |
| 196 | Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete. |
| 197 | Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. |
| 198 | Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete. |
| 199 | Providing and making second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 200 | Supplying & arranging burnt cured bricks properly for various purposes (size 9”x4.25”x3”) at work for 100 bricks complete. |
| 201 | Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete. |
| 202 | Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram). |
| 203 | Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (for 6 m pole) |
| 204 | Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles) |
| 205 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). |
| 206 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). |
| 207 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). |
| 208 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole). |
| 209 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 11m & 12.5m high octagonal /conical GI pole). |
| 210 | Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast). |
| 211 | Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast). |
| 212 | Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 20 m raising lowering high mast) . |
| 213 | Painting of pipe pole up to 6 m length along with street light / pole brackets / clamps etc by scrapping the existing paint complete as per specification no CW -PTG/PTP. |
| 214 | Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete as per specification no CW -PTG/PTP. |
| 215 | Credit for dismantled Of PVC armoured/unarmoured cables and wires (Aluminium) |
| 216 | Credit for dismantled Of PVC armoured/unarmoured cables and wires (Copper) |
| 217 | Credit for dismantled Of Aluminium materials |
| 218 | Credit for dismantled Of HG / M.S / G.I. Materials / Poles etc. |
| 219 | Credit for dismantled Of Copper / Brass materials |
| 220 | Credit for dismantled Of Wooden materials |
| 221 | Credit for dismantled Of PVC pipes/materials |
| 222 | Credit for dismantled Of I.C. / M.C. switches / D.P. / D.B./ T.P. / feeder pillar etc. |
| 223 | Credit for dismantled Of Meters (Ammeter / Voltmeter/Energy meter/All types of PCB etc..) |
| 224 | Credit for dismantled Of O.C.B. (without oil)/ A.C.B / V.C.B |
| 225 | Credit for dismantled Of Ceiling/cabin/bracket/pedestal/table fan. |
| 226 | Credit for dismantled Of Exhaust Fan 9\\" Sweep |
| 227 | Credit for dismantled Of Exhaust Fan 12\\" Sweep |
| 228 | Credit for dismantled Of Exhaust Fan 15\\" Sweep |
| 229 | Credit for dismantled Of Exhaust Fan 18\\" Sweep |
| 230 | Credit for dismantled Of Exhaust Fan 24\\" Sweep |
| 231 | Credit for dismantled Of Air circulators |
| 232 | Credit for dismantled Of Fluorescent fittings |
| 233 | Credit for dismantled Of Street/flood light fittings. |
| 234 | Credit for dismantled Of Accessories such as tube starter / bell / holder/ ceiling rose /MCB/MCCB/Contactor/PT etc. |
| 235 | Credit for dismantled Of Chokes / condenser / small coils / motor starter etc. |
| 236 | Credit for dismantled Of A.C. Compressors / Inverter Compressors |
| 237 | Credit for dismantled Of Outdoor unit of split air conditioner. |
| 238 | Credit for dismantled Of Indoor unit of split air conditioner. |
| 239 | Credit for dismantled Of Diesel Generating set |
| 240 | Credit for dismantled Of Telephone exchange (EPABX) |
| 241 | Credit for dismantled Of Telephone instrument |
| 242 | Credit for dismantled Of Inverter / UPS |
| 243 | Credit for dismantled Of Voltage Stabilizer |
| 244 | Credit for dismantled Of Tubular/SMF Battery |
| 245 | Credit for dismantled Of All types of SS material |
| 246 | SITC of 30W, 230V integral type LED Lamp |
| 247 | Supply of 6 feet aluminium foldable ladder |
| 248 | Supply & erecting four pole power contactor 430 V, 63 A for time switch complete erected on provided wooden block/ box, with necessary materials. |
| 249 | Supply & erecting four pole power contactor 430 V, 80-130 A for time switch complete erected on provided wooden block/ box, with necessary materials. |
| 250 | Supply of 20 feet Ladder |
| 251 | Supply & erecting electronic type Driver for Outdoor LED fittings upto 250W suitable to operate on 230V A.C. 50 Hz. having pf>0.95 and THD<10%. |
| 252 | Supply & erecting of 4 sq. mm Service Wire |
| 253 | Supply & erecting of 6 sq. mm Service Wire |
| 254 | Supply & erecting of 10 sq. mm Service Wire |
| 255 | Supply & erecting of PVC Tape |
| 256 | Supply & erecting of Meter Box for single phase Energy meter |
| 257 | Supply & erecting of Meter Box for Three phase Energy meter |
| 258 | Supply & erecting of 40 A Contactor Coil |
| 259 | Supply & erecting of 63 A Contactor Coil |
| 260 | Supply & erecting of 80 - 130 A Contactor Coil |
| 261 | Supply & erecting Cable Connectors for Street |
| 262 | Supply & erecting FRP street light Pole Connector plate |
| 263 | Supply of Portable & Compact 20 feet Aluminium Telescopic Ladder (16-Steps Foldable Multipurpose Collapsible Ladder) |
| 264 | Supplying and erecting 12.5m (clear height) Fixed type High Mast (Top-110mm, Bottom- 242 mm) with hexagonal/round bracket and foundation bolts suitable for max. 6 nos floodlight fixtures on provided foundation as per specification no.OH-PL/OPL (excluding luminaries). |
| 265 | Supplying & erecting street light control panel in powder coated CRCA 14/16 SWG sheet, outdoor type, three phase, 415 V consisted of suitable rating contactor, 24 hrs digital/ astronomical time switch with minimum 5 years battery backup, TPN MCB 110 A auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc for automatic operation & overcurrent, short circuit, earth fault protection of street lights upto the max load of 12 kW on provided iron frame / CC foundation complete. |
| 266 | Supplying, Replacement, Repairing winch mechanism of 12.5 mtr & 16 mtr highmast with following accessories A) Winch with sprocket & chain, B) Winch reversible motor 3phase, 415 V, C) D CLAMP/Thimble, D) D-Suckle Clamp, E) 6mm wire rope F) Stand for mounting motor & winch, G) Hydra / Crane Charges included |
| 267 | Supplying and erecting integrated LED flood light fitting Max. 250W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 30000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty |
| 268 | SITC of 10 SQMM Single Core Copper Flexible Cable Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Havells Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volt Conforming to IS 694 |
| 269 | Supplying & Erecting of Architectural Pole of 9mtr Height Double arm made of galvanised iron sections of 140mm, 88.9mm & 76mm dia. •This architecturally designed pole is structurally sound. Wind speed considered in design 50m/s, IS 875: PART - 3 :1987 •Material for tubes steel of grade YST 210.• Material for base plate steel of grade E250 to IS 2062 ; 2011. The Bracket will be provided with reducer/expander for holding the suspended type fixture on to the main pole with all arrangements having position perpendicular to the ground. The bracket shall be double arm on 9 mtr with a span of 1000mm. Each bracket section shall have SGCI design in the middle with flower design. The bracket top shall be covered with FRP top. The Pole will be placed with a Aluminium embellishments on the bottom & Middle section for aesthetic & Decorative purpose. The pole will be provided with an inbuilt junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom pipe the in built box should have a flush door of suitable size. The Decorative pole will be mounted on a square base plate of size 300 X 300mm having 12mm thickness. The mounting steel plate along with hot dip galvanised foundation bolts of size M20 X 750mm to be used for ensuring firm grouting in the specially designed RCC foundation. The Galvanised pole should be painted in 3 layer coating (Coating thickness should be more than 50 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy zinc primer & 3rd final layer with PU Paint of Matt Black on Pole and Golden on Aluminium Embellishment.Pole Design Changes as per Directed By Engineer Incharges. |
| 270 | Supplying & Erecting of 150W decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 150W LED. Fitting should be suspended mounting type fixture. System Wattage:150W LED, Protection class:IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:1200- 277Vac, Operating Temperature: 0deg to +50deg C, single phase ac supply.● light Source : Bridegelux, LED Lumens:16500lm, CRI(Ra):>80, LED Colour Temperature: 3000K, Life Span:>59,000 Hours,, ● Physical Body: Die cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate glass, Mounting: Suitable for 48mm OD Pipe, Finish: Powder Coated Black, ●Driver Power Factor:>0.95, THD:<7.8%,Surge Protection: 4KV, Efficiency:>87%. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA. LED's of Bridgelux & driver to be of make Philips. IP65 and LM79-2019 report to be provided. Light Output Colour Should be Wram White/White/ Natural White as Directed By Engineer Incharges. |
| 271 | Providing and fixing kerbstone with led lighting system as per following specifications: dimensions with vertical mounting legs with 10mm horizontal square shape mild steel reinforcements. Illuminated kerb stone having visible dimensions :-500mm x 150mm x 150mm.(as per irc - 86-1983 ) 80mm legs having ms reinforcements shal be embedded in bt/concrete road surface.the kerb stone should have kerb angle of 45 degree, with rubber plugs at both ends of the kerbstones (2 nos)having load carrying capacity - vertical : 1465kg, horizontal : 2349 (certified by govt. Recoganized bodies)having thermal stability - : -40 to +120 degree celcius (certified by govt. Recoganized bodies. Illuminated kerb stones including : ingrace protection and connector rating ip67, electrical wire -(as per is: 694), led strip (as per lm:80) standard. Including for electrical fixing -frp junction box consisting of - 10amp. Switch module power supply(smps)having input voltage - 230v ac, output voltage 36v dc, 2 pole mcb. Illuminated kerb stones having warranty for 3 years. illuminated kerbstone shall be fixed into cast-in-situ cement concrete of m20 grade at base, back filling and grooves, including dismantling, fixing, removal of dismantled material and cleaning etc. Complete. The colour of kerb stone shall be provided as directed by engineer in charge. |
| 272 | Supply of decorative GI combo pole 3 mtr one with small pride 40 W post top decorative LED fitting CCT-4000k and 15W LED module CCT-3000k.The bottom section of the pole shall be made out of 150mm pipe with suitable thickness with top section 125mm dia GI pipe.The pole shall have flush door suitable size with 32A connector and 6A MCB suitable upto 4C X 10/16 Sqmm AL cable.The pole shall be suitable with the foundation bolt set M20X450mm long with nuts and washer.polyester coating or epoxy zinc posphate primer |
| 273 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 274 | Providing & erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 275 | Supplying and erecting of CT'10 VA 800/5A class 1 |
| 276 | LED FIXTURE - LIGHT 851, Wattage 35-45W Power Module LED, 3000K, Upright, Light 851:it's upper square frame in single piece made of die cast aluminum using pressure die-casting process,with a decorative element which is also made of die cast aluminium using pressure die-casting process, fixed on the top. Auxiliary and optical compartment can be accessed by tilting the top frame.Bottom frame with Company /brand name engraved in the mold, in single piece, made of die cast aluminum using pressure diecasting process with a four-armed bracket with flange, which is also made of die cast aluminum using pressure diecasting process, fixed at the bottom. Frosted Screen made of polymethylmethacrylate (PMMA) molded in a single piece using Injection molding process. Screen's Impact resistance: IK06.Pure polyester powder coating in Standard Grey Colour. Optical Compartment IP Rating - IP 66. Height – 605mm, Length - 325mm, Width - 325mm, Weight - 6Kg, Area Exposed to Wind(S) - 0.15 m2. Power LED Module with Company /brand name printed on PCB with the metal core plate, in compliance with IEC 62031 (Supporting Test Report from UL Authorised Laboratory should be submitted. LED Chips of CREE/NICHIA make with Individual LED's Minimum Luminous Flux (lm) - 130lm @ 350 mA (@ 85 °C) shall be used- same should be supported by LED manufacturer's tech sheet . Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over-Current, with in-built surge protection a minimum of 1.5kV (an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens in PC (Polycarbonate),UV Resistant & Shock Resistance-IK10. LM80 Reported LED Lifetime is L90@ 50,000hours minimum & Estimated LEDLifetime is L80 @ 100,000 hours(Ta-25°C) minimum.LM 80 report & TM 21 calculation should be submitted to support the same.The Light fixture shall be in compliance with IEC 60598-2-3; IEC 60598-1.(Supporting Test Report from UL Authorised Laboratory should be submitted) .LM79 report should be submitted from UL Authorised Laboratory. Sample should besubmitted for approval from concerned engineer-in charge. Approved Make. |
| 277 | ARCHITECTURAL POST TOP POLE :JM.01.20.025 3.5M height Pole made of complete cast iron decorative components where the internal fabricated pole of 3M is Made in combination of mild steel pipe sections 89mm dia.,48mm dia. & covered on the outside by decorative cast iron base and columns. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260mm dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210mm and gradual tapering upto a dia 92mm as approved by the econerned Engineer the total height of decorative cast iron base is 700mm and weight-32kgs. Decorative cast iron base should be provided with a flush door of length 228mm, width 124mm and height 30mm. Decorative cast iron flower starting with a dia 102 mm increasing gradually to 160mm and then tapering to a dia 99mm.Total height of cast iron flower is 304 mm & weight is 6.3kgs.. Decorative cast iron column(3nos.) is of 80mm dia. and having continuous grooves along the height. The height of each pillar is 750mm & weight of each pillar is 9.5kgs. Decorative Cast iron top starting with dia 80mm and a ring of dia 96mm at height of 160mm then gradually increasing to dia 120mm the top half of the decorative top should have grooves of depth 5mm, total height of cast iron top is 334mm - weight-5.2kg. All cast iron parts weight mentioned are with +/5% tolerance.Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedastal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Only cast iron parts outside are PU painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etchprimer, 2nd layer with epoxy primer & 3rd final layer with PU paint. Approved Makes - NERI ARCHITECTURAL POST TOP POLE : JM.01.20.025/ DW WINDSOR CI POLE / GHM CI POLE. |
| 278 | LED FIXTURE - Projector Light, NPL-3- 24,55 65W,LED,3000K/RGB Single Colour, IP 66, Light NPL-3-24: Thehousing in light weight, made of high strength die cast aluminium and coated by static powder making it weatherresistant.Protection screen in ultra white tempered glass with high impact resistance . High precision dial ensures precision angle adjustment.Premium thermal management by high heat conductivity aluminum alloy and thermal fins. Pure Polyester powder coating in Standard Grey Colour. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP66rated. Height – 147mm, Dia.-224mm, Weight - 3.75Kgs. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate.,P.F>0.9,voltage input AC100 277V,50/60Hz. In-Built Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over-Voltage & Over- Current, with in-built surge protection. Lens made of PC. Estimated LED Lifetime is 70,000 hours minimum. LM80 report from LED Manufacturer should be submitted.Minimum Light fixture Lumen output is 1800Lumens @ full power. LM 79 Report should be submitted from from UL Authorised Laboratory. Sample Should be submitted for concerned engineer incharge for approval of light fixture. Approved Makes - NERI - LED FIXTURE - Projector Light, NPL-3-24, 55- 65W, LED, RGBW (DMX 512 Compatible), IP 66. Gva Lighting / Lumen Pulse. |
| 279 | SITC Street Light Octagonal Pole Connection Window FRP Cover with Hinges(500 mm X 122 mm) |
| 280 | SITC Street Light Octagonal Pole Connection Window FRP Cover with Hinges(500 mm X 95 mm) |
| 281 | SITC Street Light Octagonal Pole Connection Window FRP Cover with Hinges(395 mm X 110 mm) |
| 282 | SITC Street Light Octagonal Pole Connection Window FRP Cover with Hinges(400 mm X 95 mm) |
| 283 | Supply, Installation, Testing and Commissioning of Smart Lighting Controller in existing feeder panels which includes, 3 nos CT with class 1 accuracy, Three phase power supply with withstanding capability up to 500 VAC, Instant mode, Fixed Mode, Astronomical Mode, Hybrid Mode, Interval Mode, Offset in Sunset and Sunrise Timing for scheduling, Provision for measurement of all three phase electrical parameters like voltage, current, power factor, power, frequency, energy with atleast class 1 accuracy and compliant with IS13779 standard, UV-OV protection, backup battery 4 hrs, Andriod/iOS app and software to operate form computer, provision to add display device externally, support for RS485 communiction , inbuilt GSM/GPRS 4G modem with 2G fallback, Real time GPS based clock, calender, lithium ion battery backup for RTC clock, Three relay output, Minimum Ninety days data memory inbuilt backup facility, Controller shall be type tested with NABL approved lab for EFT or burst testing for conducted immunity in accordance with IEC 610000-4-4, Software should have undergone a \\"Vulnerability Assessment and Penetration Testing (VAPT)\\" as per OWASP Top 10 2021 and 2022, SANS CWE 24 & CERT-In Standard.The detailed specification are attached. |
| 284 | SITC Façade Lighting Indoor/Outdoor 5m LED Flexible Strip with Profile & Driver 9W IP 68 STRIP Make-Surya,K-Lite |
| 285 | SITC Landscape Lighting Empire LED Post top Lattern Housing is made up of cast aluminium with top cover in aluminium Die Cast Spiget 35W-Empire |
| 286 | Indoor Commercial Surface Suspended mounted 36W (Case Lot-2) Corvus LED Linear Light suitable for seamless linear lighting.continous mounting solution avilable on request,housing colour avaible in black and silver on request.Tunable and dimmable(DALI) available on request.Seamless end to end connectivity solution is also available CCT-3K,4K,5K,6K on request. |
| 287 | SITC wall washer Light IP65 dust-proof and water-resistant outdoor light wall washer, With modern, minimalistic design, this wall light exudes a distinct look when installed on the walls of buildings, gardens and along pathways. It can be strategically put to highlight your surroundings with exquisite patterns. The two-way directional light on either side of the wall, illuminates a larger surface area for a magical look.Make-Philips, surya,k-lite |
| 288 | SITC of 30W multi color Linear wash light, Protection Rating : IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\",and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable wall mount yoke arrangements for fixing the lights. Power consumption : 30W, CCT : RGBW, (as per the design approval) Optics : PMMA with holder, Beam Angle : 25º/45º/60º, Control : DmX512 Channel : 4 CH, Body : Die casted /extruded aluminium : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK05. Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK05, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer Power & DMX Loop In/Out along with moulded connector having the length >400mm. |
| 289 | SITC of Power Driver for above lights, POWER : 200W, INPUT : AC 110-240V AC, 50HZ, OUTPUT : DC 24V, Protection rating IP66,Constant Voltage (C.V.) + Constant Current (C.C.) output, High efficiency up to 93%, Working temperature (case temperature)-45~+45°C, Protections: Short circuit / Over current / Over voltage/ Over temperature, Comply with harmonic current limit per EN61000-3-2 Class C (50% load), Meet 4kV surge immunity level. |
| 290 | SITC of IP Junction box made up of Thermosetting plastic with sheet moulding compund with hot press compression confirming to IS:13410 for accommodating Drivers. Dimensions >250 x 250 x 155. |
| 291 | SITC of DMX isolator or splitter provides Isolated optical DMX splitter provides 8 outputs from a 1 input and Input voltage: AC 110 to 220 V, 50 Hz, Product features: Group 1 & group 8 DMX signal change. |
| 292 | SITC of DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced and color mixing luminaires, DMX audio players and fountains. The controller comes with a variety of features, iPhone/iPad/Android remote control, WiFi facilities, dry contact port triggering and flash memory. 256 DmX channels with Interface, cdrom, usb cable, XLR3, mini USB, 1 HE10, Power From 5V to 5.5V DC. Environement IP20 Temperature 0ºC to 50ºC, stand alone mode with 1 area and 20 scenes. 20K Standalone memory. |
| 293 | Supplying and erecting mains with 3 x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW |
| 294 | Supplying and erecting mains with 3 x 10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW |
| 295 | Supplying and erecting mains with 4 x 16 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW |
| 296 | Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB LT/CU |
| 297 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 298 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 2 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 299 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 2 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 300 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 301 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 3 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 302 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 3 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 303 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 3½ core 25 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 304 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (round) cable 1100 V, 3½ core 35 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 305 | Painting identificationnumber by indelible inkmarker /enamel paint on fittings/ equipmentwith thehelpof ladders if necessarybydismantlingand refitting the enclosures, tubes etc if required the same and refitting complete. |
| 306 | Dielectric PaintsDielectric Paints are applied as Insulation to protect from electric shocks at higher voltage.These paints can be applied on metal by applying our Primer AS 2030 and then followed by coat of Paint.Per Coat Insulation < 5KV Chemical Resistance Fire Proof property (Made to Order).100 % High Solid,The Product Passes as per ASTM D149, IS 10026 (Part 2) from 5V to 33 KV.1.5 LT ( 1 Lt Base + 500 ML Hardener) |
| 307 | SITC Angle Iron Stand Control Panel/ Feeder Pillar Panel |
| 308 | SITC Cable Clamp R-Type Cable Clip Wire Clamp 1/2\\" Nylon Screw Mounting Cord Fastener Clips with Screws for Wire Management |
| 309 | Supply & erecting of 12 sq. mm Service Wire |
| 310 | Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW SWR/MCCB |
| 311 | Supply, Installation, Testing and commissioning of 3 M Arm Single arm pole from the ground level, pole material shall be pre galvanized mild steel complied with BS 1139/ 1161 made up of ERW 'B' class pipes. The bottom pipe shall be of diameter 114.3mm & top pipe shall be 76.1mm in diameter with wall thickness of 3.5mm & 3.0mm respectively. The Base Plate size shall be 300 X 300mm with thickness of 12mm MS material duly PU painted. Decorative Cast Iron base of 700mm giving an aesthetic look to the pole. Embellishment shall be placed at the bottom & intersection of the 2 pipes & properly bolted to withstand distortion. The pole shall also be provided with a single straight arm bracket with 38mm diameter and a span of 850mm with a cast iron bracket of 600mm suitable for suspended fixture. The pole shall be properly cleaned, machine polished and coated with epoxy zinc rich penetrating etch primer and finished with polyurethane base paint for a long-lasting finish with 45-micron coat in required colour as approved of Premium make. The Pole shall be provided with a maintenance window of size 300mm length & 95mm width with Allen bolt locking arrangement. Loop in Loop out connector mounted on appropriate size Bakelite sheet with stud terminals along with 1no. 6A SP MCB to be provided with each pole. The Pole shall be packed with shrink wrapping along with bubble paper wrap for avoiding scratches during transportation & installation. The Poles shall be supplied with foundation bolts M16 X 600mm made up of mild steel and threaded portion to be hot dip galvanized along with 2 nuts & 1 vicer per bolt. Factory test reports along with PDI & test certificates of galvanization & material TC to be attached along with the supply. The Pole shall withstand the wind speed of 75KMPH as per IS 875. Pole Design will be finalized as per site condition as per Directives by Engineer In charge. |
| 312 | Supply, Installation, Testing and commissioning of 4 M Arm Single arm pole from the ground level, pole material shall be pre galvanized mild steel complied with BS 1139/ 1161 made up of ERW 'B' class pipes. The bottom pipe shall be of diameter 114.3mm & top pipe shall be 76.1mm in diameter with wall thickness of 3.5mm & 3.0mm respectively. The Base Plate size shall be 300 X 300mm with thickness of 12mm MS material duly PU painted. Decorative Cast Iron base of 700mm giving an aesthetic look to the pole. Embellishment shall be placed at the bottom & intersection of the 2 pipes & properly bolted to withstand distortion. The pole shall also be provided with a single straight arm bracket with 38mm diameter and a span of 850mm with a cast iron bracket of 600mm suitable for suspended fixture. The pole shall be properly cleaned, machine polished and coated with epoxy zinc rich penetrating etch primer and finished with polyurethane base paint for a long-lasting finish with 45-micron coat in required colour as approved of Premium make. The Pole shall be provided with a maintenance window of size 300mm length & 95mm width with Allen bolt locking arrangement. Loop in Loop out connector mounted on appropriate size Bakelite sheet with stud terminals along with 1no. 6A SP MCB to be provided with each pole. The Pole shall be packed with shrink wrapping along with bubble paper wrap for avoiding scratches during transportation & installation. The Poles shall be supplied with foundation bolts M16 X 600mm made up of mild steel and threaded portion to be hot dip galvanized along with 2 nuts & 1 vicer per bolt. Factory test reports along with PDI & test certificates of galvanization & material TC to be attached along with the supply. The Pole shall withstand the wind speed of 75KMPH as per IS 875. Pole Design will be finalized as per site condition as per Directives by Engineer In charge. |
| 313 | Supply, Installation, Testing and commissioning of 3 M Arm Double arm pole from the ground level, pole material shall be pre galvanized mild steel complied with BS 1139/ 1161 made up of ERW 'B' class pipes. The bottom pipe shall be of diameter 114.3mm & top pipe shall be 76.1mm in diameter with wall thickness of 3.5mm & 3.0mm respectively. The Base Plate size shall be 300 X 300mm with thickness of 12mm MS material duly PU painted. Decorative Cast Iron base of 700mm giving an aesthetic look to the pole. Embellishment shall be placed at the bottom & intersection of the 2 pipes & properly bolted to withstand distortion. The pole shall also be provided with a dual straight arm bracket with 38mm diameter and a span of 850mm with a cast iron bracket of 600mm suitable for suspended fixture. The pole shall be properly cleaned, machine polished and coated with epoxy zinc rich penetrating etch primer and finished with polyurethane base paint for a long-lasting finish with 45-micron coat in required colour as approved of Premium make. The Pole shall be provided with a maintenance window of size 300mm length & 95mm width with Allen bolt locking arrangement. Loop in Loop out connector mounted on appropriate size Bakelite sheet with stud terminals along with 1no. 6A SP MCB (Siemens make) to be provided with each pole. The Pole shall be packed with shrink wrapping along with bubble paper wrap for avoiding scratches during transportation & installation. The Poles shall be supplied with foundation bolts M16 X 600mm made up of mild steel and threaded portion to be hot dip galvanized along with 2 nuts & 1 vicer per bolt. Factory test reports along withPDI & test certificates of galvanization & material TC to be attached along with the supply. The Pole shall withstand the wind speed of 75KMPH as per IS 875. Pole Design will be finalized as per site condition as per Directives by Engineer In charge. |
| 314 | Supply, Installation, Testing and commissioning of 4 M Arm Double arm pole from the ground level, pole material shall be pre galvanized mild steel complied with BS 1139/ 1161 made up of ERW 'B' class pipes. The bottom pipe shall be of diameter 114.3mm & top pipe shall be 76.1mm in diameter with wall thickness of 3.5mm & 3.0mm respectively. The Base Plate size shall be 300 X 300mm with thickness of 12mm MS material duly PU painted. Decorative Cast Iron base of 700mm giving an aesthetic look to the pole. Embellishment shall be placed at the bottom & intersection of the 2 pipes & properly bolted to withstand distortion. The pole shall also be provided with a dual straight arm bracket with 38mm diameter and a span of 850mm with a cast iron bracket of 600mm suitable for suspended fixture. The pole shall be properly cleaned, machine polished and coated with epoxy zinc rich penetrating etch primer and finished with polyurethane base paint for a long-lasting finish with 45-micron coat in required colour as approved of Premium make. The Pole shall be provided with a maintenance window of size 300mm length & 95mm width with Allen bolt locking arrangement. Loop in Loop out connector mounted on appropriate size Bakelite sheet with stud terminals along with 1no. 6A SP MCB to be provided with each pole. The Pole shall be packed with shrink wrapping along with bubble paper wrap for avoiding scratches during transportation & installation. The Poles shall be supplied with foundation bolts M16 X 600mm made up of mild steel and threaded portion to be hot dip galvanized along with 2 nuts & 1 vicer per bolt. Factory test reports along with PDI & test certificates of galvanization & material TC to be attached along with the supply. The Pole shall withstand the wind speed of 75KMPH as per IS 875. Pole Design will be finalized as per site condition as per Directives by Engineer In charge. |
| 315 | Supply of 40W decorative luminaire made of spun aluminum body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 40W LED. Fitting should be suspended mounting type fixture. System Wattage:40W LED, Protection class: IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:1200- 277Vac, Operating Temperature: 0deg to+50deg C, single phase ac supply. light Source: Bridgelux, LED Lumens: @120lm/w, 4800lm, CRI(Ra):>80, LED Color Temperature: 3000K to 6000k Life Span:>59,000 Hours, Physical Body: Die cast Aluminum Base, Body Spun Aluminum, Diffuser: Convex Type Translucent / V Translucent, mounting: Suitable for 50mm OD Pipe, Finish: Powder Coated Black, Driver Power Factor:>0.95, THD:<7.8%, Surge Protection:4KV, Efficiency:>87%. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA of Philips make. LED's of Bridgelux & driver to be of make Philips. IP65 and LM79-2019 report to be provided. |
| 316 | Supply of 50W decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 50W LED. Fitting should be suspended mounting type fixture. System Wattage:50W LED, Protection class: IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:1200-277Vac, Operating Temperature: 0deg to +50deg C, single phase ac supply. light Source: Bridegelux, LED Lumens:5500lm, CRI(Ra):>80, LED Colour Temperature: 3000K to 6000k Life Span:>59,000 Hours, Physical Body: Die cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent, mounting: Suitable for 50mm OD Pipe, Finish: Powder Coated Black, Driver Power Factor:>0.95, THD:<7.8%, Surge Protection:4KV, Efficiency:>87%. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA. LED's of Bridgelux& driver to be of make Philips. IP66 and LM79-2019 report to be provided. |
| 317 | Supply Installation testing commissioning of 5 mt decorative TRISHUL Pole. Decorative Pole having Cast Iron bottom of around 700mm with bottom dia 388 mm. and M.S. pipe 90mm dia center and 60mm dia at top with C.I. Embellishments. Pole is provided with single Arm bracket along with decorative embellishments as per drawing. Complete Pole and bracket is Primer coated and painted with polyurethane paint. Material: MS Castes base with Mild Steel Pipe. A service window is provided in the bottom portion of the pole comprising heavy duty 4way connector & suitable rating MCB on a Bakelite sheet. The pole is suitable for mounting with 4 nos. Anchor bolts & complete with wiring of Pole with 3 corex2.5sq mm FR PVC insulated copper wire. Pole Design will be finalized as per site condition as per Directives by Engineer In charge. |
| 318 | Supplying & Erecting of Decorative Pole of 5 M Height Single arm pole made of Gl sections of 114mm, and 88.9mm dia. Base casting of 700mm height with base plate section of 450mm dia. The casting base plate shall be of 16mm thick and shall gradually move up to 120mm height and shall have 300mm dia that shall again taper in to 100 height with 2 ring design of 15mm thick and 200mm dia. It shall again taper out with a curve unto 430mm height with 230mm dia and top 143mm dia. The 430mm height section shall have a door of size 160mm on bottom and 100 on top with an height of 235mm. The pole shall have an additional base plate of 6mm thick which shall be welded to the pole for additional strength. The door shall have a floral design to give and aesthetic look. Bracket provided with reducer/expander for holding the Single arm bracket length 1200mm. The bracket shall have SGCI casting of 750mm which shall be in position perpendicular to ground. The Bracket shall have Cl Top of size 250mm top of the bracket pipe. The bracket arm shall have provision for placing suspended type LED fixture lights on top. Pole shall have Cl casting ring embellishments in between the pole shaft. The base casting shall have provision for Inbuilt junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom. Mounting steel plate have hole suitable for foundation bolts of size M20 X 800mm. Gi pole shall be painted in 3 coat process ($50 micron) 1st Coat with etch primer, 2nd Coat with epoxy zinc primer & 3rd final Coat with PU Paint. Pole Design will be finalized as per site condition as per Directives by Engineer In charge. |
| 319 | Supplying & Erecting of Decorative Pole of 5 M Height Double arm pole made of GI sections of 114mm, and 88.9mm dia. Base casting of 700mm height with base plate section of 450mm dia. The casting base plate shall be of 16mm thick and shall gradually move up to 120mm height and shall have 300mm dia that shall again taper in to 100 height with 2 ring design of 15mm thick and 200mm dia. It shall again taper out with a curve unto 430mm height with 230mm dia and top 143mm dia. The 430mm height section shall have a door of size 160mm on bottom and 100 on top with an height of 235mm. The pole shall have an additional base plate of 6mm thick which shall be welded to the pole for additional strength. The door shall have a floral design to give and aesthetic look. Bracket provided with reducer/expander for holding the Single arm bracket length 1200mm. The bracket shall have SGCI casting of 750mm which shall be in position perpendicular to ground. The Bracket shall have Cl Top of size 250mm top of the bracket pipe. The bracket arm shall have provision for placing suspended type LED fixture lights on top. Pole shall have Cl casting ring embellishments in between the pole shaft. The base casting shall have provision for Inbuilt junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom. Mounting steel plate have hole suitable for foundation bolts of size M20 X 800mm. Gl pole shall be painted in 3 coat process ($50 micron) 1st Coat with etch primer, 2nd Coat with epoxy zinc primer & 3rd final Coat with PU Paint.Pole Design will be finalized as per site condition as per Directives by Engineer In charge. |
| 320 | Supplying & Erecting of Architectural Pole of 9mtr Height Single arm made of galvanised iron sections of 140mm, 88.9mm & 76mm dia. •This architecturally designed pole is structurally sound. Wind speed considered in design 50m/s, IS 875: PART - 3 :1987 •Material for tubes steel of grade YST 210. • Material for base plate steel of grade E250 to IS 2062; 2011. The Bracket will be provided with reducer/expander for holding the suspended type fixture on to the main pole with all arrangements having position perpendicular to the ground. The bracket shall be double arm on 9 mtr with a span of 1000mm. Each bracket section shall have SGCI design in the middle with flower design. The bracket top shall be covered with FRP top. The Pole will be placed with a Aluminium embellishments on the bottom & Middle section for aesthetic & Decorative purpose. The pole will be provided with an inbuilt junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom pipe the in-built box should have a flush door of suitable size. The Decorative pole will be mounted on a square base plate of size 300 X 300mm having 12mm thickness. The mounting steel plate along with hot dip galvanised foundation bolts of size M20 X 750mm to be used for ensuring firm grouting in the specially designed RCC foundation. The Galvanised pole should be painted in 3-layer coating (Coating thickness should be more than 50 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy zinc primer & 3rd final layer with PU Paint of Matt Black on Pole and Golden on Aluminium Embellishment. Pole Design will be finalized as per site condition as per Directives by Engineer In charge. |
| 321 | Supplying and erecting porcelain base iron clad cut out HC type 415V, 200A erected on polished wooden block. |
| 322 | SITC Generic Steel Screw 35x8 Box -50 Nos |
| 323 | SITC Raval plug Box |
| 324 | SITC Hard Steel Nail, Concrete Nail, China Kaati/Khila 200 Nos. Box (1inch/25mm) |
| 325 | SITC Waterproof Tape 10m |
| 326 | Supplying and erecting integrated LED street light fitting 180-200W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 19000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/FLS2. |
| 327 | Supplying and erecting integrated LED street light fitting 250W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 19000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/FLS2. |
| 328 | Supplying and erecting integrated LED flood light fitting Max. 400W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 30000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty |
| 329 | Supplying, erecting & commissioning of all-in-one integrated LED solar light fitting Min. 60W IP65 & IK08 class having single highly efficient LM6 Pressure die Cast / Extruded Al Housing with Proper OEM Brand Name Embossment for ensuring quality, with mid power white dimmable LEDs having system lumens output of Min. 8100 Lumens with LM79 Report from own NABL Accredited Lab, minimum dimming 25%, min. efficacy of Minimum 135 Lumens / Watts at System level after all losses , CRI>70, CCT upto 6000-6500 K, Life class of 50,000 Hrs. at L70B50. The Solar Cell shall be made of Premium grade mono crystalline silicon Cell. Solar Battery 12.8V Lithum Ferrous Phosphate Battery with BMS BIS approved. Solar Panel minimum 120 Wp PV/ Battery Sizing at least 48AH to be design with dimming profile based on Load Wattage, Battery & Panel sizing calculation to be submitted. Rechargeable Lithium Ferro Phosphate (LiFePo4) Battery Pack with highly efficient, integrated microprocessor based MPPT charge controller with driver mounted on the same board to minimize power loss with 5 Years warranty as per specification. Product to ensure proper load managemnet on the Pole. |
| 330 | Supplying, erecting & commissioning of all-in-one integrated LED solar light fitting Min. 90-100W IP65 & IK08 class having single highly efficient LM6 Pressure die Cast / Extruded Al Housing with Proper OEM Brand Name Embossment for ensuring quality, with mid power white dimmable LEDs having system lumens output of Min. 13000 Lumens with LM79 Report from own NABL Accredited Lab, minimum dimming 25%, min. efficacy of Minimum 135 Lumens / Watts at System level after all losses , CRI>70, CCT up to 6000-6500 K, Life class of 50,000 Hrs. at L70B50. The Solar Cell shall be made of Premium grade mono crystalline silicon Cell. Solar Battery 12.8V Lithum Ferrous Phosphate Battery with BMS BIS approved. Solar Panel minimum 150-170 Wp PV/ Battery Sizing at least 48AH to be design with dimming profile based on Load Wattage, Battery & Panel sizing calculation to be submitted. Rechargeable Lithium Ferro Phosphate (LiFePo4) Battery Pack with highly efficient, integrated microprocessor based MPPT charge controller with driver mounted on the same board to minimize power loss with 5 Years warranty as per specification. Product to ensure proper load managemnet on the Pole. |
| 331 | SITC of PCB for street Light 45W to 70W |
| 332 | SITC of PCB for street Light 90W to 120W |
| 333 | SITC of PCB for street Light 130W to 160W |
| 334 | SITC of PCB for street Light 180W to 200W |
| 335 | SITC of PCB for street Light 180W to 250W |
| 336 | SITC of PCB for Flood Light 120W to 150W |
| 337 | SITC of PCB for Flood Light 200W to 250W |
| 338 | SITC of PCB for Flood Light 400W Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender