Tender For Repair/Replacement Of Garden Light Fittings, Fixture Bollard Light/Gate Light At Officers Mess, Jco Mess, Offices At Anand Parbat Mil Stn Under Ge (North) Delhi Cantt-10
Tender Value
40 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
13 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Garden Light Fittings, Fixture Bollard Light/Gate Light At Officers Mess, Jco Mess, Offices At Anand Parbat Mil Stn Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fix New generation, IP 65 LED post-top light 25W Capacity, warm white,energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source and Clear Cover offers bright illumination complete with accessories all as specified. Make : Havells Cat Part No RUBYNXTPT25WLED757PSYMTOPC and equivelant Philips/Crompton |
| 2 | Supply and fix New generation, post-top, 40W Capacity, warm white ,energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution, die-cast aluminium landscape luminaire with high power LED as light source. Unique ring shape LED Engine ensuring soothing, glare free light distribution complete with accessories all as specified. Make : Havells Cat Part No SIMBOLPT40WLED730SYMPCGRYCMP and equivelant Philips/Crompton |
| 3 | Supply and fix Flexible Tri-color strip light , Mains for 120 LED per meter , 18m length with suitable power card complete with fixing accessories suitable for outdoor applications IP65 complete all as specified. Make : Havells Cat Part No FLEXISTRIPTRICAROPE120D18MSTRIPIP65V2 and equivelant Philips/Crompton |
| 4 | Supply and fix LED Flexible Mono-color Mains Voltage NEON LED strips lights with Silicon housing suitable for outdoor applications IP65 ,50m length with suitable power card complete all as specified.Havells Cat Part No FLEXISTRIPNEON50MIP65AC7.5W/M830V1 and equivelant Philips/Crompton |
| 5 | Supply and fix LED UP-down Luminaire ,3000 K (Warm White),15 W, 240 V ,Luminous Flux: 1200 lm with wall surface mounting using COB LED as light source Environmental friendly, new generation, energy saving, decorative IP 66 (weatherproof/water-resistant for outdoor use) complete all as specified.Havells Cat Part No LIOWLS15WLED830PSYMTOTG and equivelant Philips/Crompton, |
| 6 | Supply and fix Acrylic LED name plate for 20cm x 40 cm with white backround with mirror shine Bronze letters and material used weatherproof/water-resistant for outdoor use made with high end computerized laser cutting complete with fixing accessories all as specified. (i) Sample approved by GE (ii) Letter size and writing letter will be provided by Engineer-in -charge |
| 7 | Supply and installation of Decorative Ornamental pole as per Lustre item No.Li-8465. Total height of the pole is 4000 mm nominal above the ground. The pole is made out of mild steel tube and cast iron base . Mild steel tube shall pass through the Cast iron pedestal and joined with the mild steel base plate by means of welded joints at the bottom of the pole. Cast Aluminium embellishments are fitted with the help of grub screws . A built in service window is provided to accommodate a 6 amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole as shown in attached drawing. The Decorative Pole Shall be machined and Polished properly to give it a smooth Surface. The Decorative is duly pretreated by Shot Blasting Process and painted in U.V. ray resistant P.U. coating in approved color shade. The Coating on the pole Should have a minimum DFT of 90 microns & Should pass a minimum of 300 Salt Spray Hours as per IS or ASTM testing methods. Decorative pole shall be installed at desired location including foundation of the pole by making cement concrete foundation of 1:2:3( 1 cement: 3 course sand : 6 Raded stone aggregate 40mm nominal size) with the help of anchor bolts and 38mm G.I sleeve as required complete all as specified. Make:-Philips/Lustre/Neri/Ligman |
| 8 | Supply and Installation of 50W Led Post Top Luminaire as per Lustre item No. Li-50072-50(LIPTF-50) Luminaire is made of Cast and Spun Aluminium and fitted with polycarbonate/PMMA diffuser. The dimensions of the Posttop Luminaire are 500 mm width and 960mm Height. Led shall be mounted on the PCB and fitted in the Luminaire .PCB shall be fitted on the suitable Heat Sink for proper Heat Dissipiation. Suitable Constant Current Led driver with power factor 0.95 or more and efficiency 85% or more Shall also be fitted inside the Luminaire. The Surface of the Luminaire Shall be machined and polished Properly to give it a Smooth Surface. The Luminaire shall be duly pretreated and Coated in U.V. ray resistant polyurethane/Polyester in approved color shade. A Two Way Connector Shall be Provided in the Luminaire for the mains Connections. Luminaire Shall be installed at the desired location on the decorative pole complete all as specified .Make:-Philips/Lustre/Neri/Ligman |
| 9 | Supply and installation of 12W Led Garden Bollard as per Lustre item No. Li-8121(LIBLF-12). The Garden Bollard is made out of Cast and Extruded aluminium . The Dimensions of the Garden bollard are 175mm width and 600mm height. A Translucent PMMA diffuser is Fitted in the Luminaire. Led shall be mounted on the PCB and fitted in the Luminaire .PCB shall be fitted on the suitable Heat Sink for proper Heat Dissipiation. Suitable Constant Current Led driver with power factor 0.95 or more and efficiency 85% or more Shall also be fitted inside the Luminaire. The Surface of the Luminaire Shall be machined and polished Properly to give it a Smooth Surface. The Luminaire shall be duly pretreated and Coated in U.V. ray resistant polyurethane/ Polyester in approved color shade. A Two Way Connector Shall be Provided in the Luminaire for the mains Connections. Bollard shall be installed at desired location including foundation of the Same by making cement concrete foundation of 1:2:3( 1 cement: 3 course sand : 6 graded stone aggregate 40mm nominal size) with the help of anchor bolts and G.I sleeve as required. Make:-Philips/Lustre/Neri/Ligman |
| 10 | Supply and installation of 15 W Tri Colour Led Garden Bollard as per Lustre item No.Li-8173(LIBLF-15). The Luminaire is made out of Cast and extruded aluminium. The Dimensions of the Garden bollard are 100 mm dia and 600mm height. A Translucent PMMA diffuser is Fitted in the Luminaire. Led shall be mounted on the PCB and fitted in the Luminaire .PCB shall be fitted on the suitable Heat Sink for proper Heat Dissipiation. Suitable Constant Current Led driver with power factor 0.95 or more and efficiency 85% or more Shall also be fitted inside the Luminaire. The Surface of the Luminaire Shall be machined and polished Properly to give it a Smooth Surface. The Luminaire shall be duly pretreated and Coated in U.V. ray resistant polyurethane/Polyester in approved color shade. A Two Way Connector Shall be Provided in the Luminaire for the mains Connections. Bollard shall be installed at desired location including foundation of the Same by making cement concrete foundation of 1:2:3( 1 cement: 3 course sand : 6 graded stone aggregate 40mm nominal size) with the help of anchor bolts and G.I sleeve as required. Make:-Philips/Lustre/Neri/Ligman Please Enable Macros to View BoQ information |
| 11 | Supply and installation of 15 W Tri Colour Led Garden Bollard as per Lustre item No.Li-8173(LIBLF-15). The Luminaire is made out of Cast and extruded aluminium. The Dimensions of the Garden bollard are 100 mm dia and 600mm height. A Translucent PMMA diffuser is Fitted in the Luminaire. Led shall be mounted on the PCB and fitted in the Luminaire .PCB shall be fitted on the suitable Heat Sink for proper Heat Dissipiation. Suitable Constant Current Led driver with power factor 0.95 or more and efficiency 85% or more Shall also be fitted inside the Luminaire. The Surface of the Luminaire Shall be machined and polished Properly to give it a Smooth Surface. The Luminaire shall be duly pretreated and Coated in U.V. ray resistant polyurethane/Polyester in approved color shade. A Two Way Connector Shall be Provided in the Luminaire for the mains Connections. Bollard shall be installed at desired location including foundation of the Same by making cement concrete foundation of 1:2:3( 1 cement: 3 course sand : 6 graded stone aggregate 40mm nominal size) with the help of anchor bolts and G.I sleeve as required. Make:-Philips/Lustre/Neri/Ligman Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender