Tender For Balance Work Of 100 Bedded Girls Hostel At Tral (Left Out Items)
Tender Value
8.48 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
8 days left
EMD
16960
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work Of 100 Bedded Girls Hostel At Tral (Left Out Items)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 12mm thick imported wood /Fir wood for Soffit ceiling rebated with frame work of budloo wood of 3\\"X1½\\" spacing not more than 2' including all fittings and fixtures complete. |
| 2 | Providing and fixing plained eaves boarding.300x40 mm (nominal size) 2nd class devdar wood |
| 3 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including priming coat. |
| 5 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 6 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 7 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 8 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore |
| 9 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore |
| 10 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 11 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 12 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 13 | Providing and fixing 50 Ltr hot water Geysers of approved brand and manufacture incl. all fittings complete. |
| 14 | Providing and fixing PVC pipes Type B of approved make . |
| 15 | a) 100 mm PVC pipes |
| 16 | b) 75 mm PVC pipes |
| 17 | c) 75 mm plain bend |
| 18 | d) 100mm plain bend |
| 19 | e) 75 mm Door bend/Tee |
| 20 | f) 100mm Door bend/Tee |
| 21 | g) 100mm x75 mm dia PVC Reducer |
| 22 | h) 100mm dia Equal Tee |
| 23 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 24 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630×450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 25 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per L.S. 13983 with C.I. brackets and stainless-steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040mm bowl depth 178mm |
| 26 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 27 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. |
| 28 | i) 15 mm dia. nominal bore (medium) |
| 29 | i) 20 mm dia. nominal bore (medium) |
| 30 | li) 25 mm dia. nominal bore (medium) |
| 31 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 32 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 33 | Providing and Fixing of Floor Traps 75 mm dia of approved make . |
| 34 | Providing and fixing of 100x100x75mm unequal Tees of approved make. |
| 35 | Providing and fixing of 100mm collars of approved make |
| 36 | Providing and fixing of 75mm collars of approved make |
| 37 | Providing and fixing of CP Tubes of approved make |
| 38 | Constructing brick masonry chamber for underground C.I. inspectionchamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line- |
| 39 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 40 | Providing and fixing of soap dispenser of approved brand incl.all fittings complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender