Tender For Development Of Road From A-N Road To Sukanta Colony (L=2.316Km) Under The Jurisdiction Of Jatanbari Pwd (R&B) Sub-Division/Sh:-Through-Out Laying Of 30Mm (Thickness Bc Using Paver Machine) ,Vg-30 As Tack Coat,Sand Seal Coating & Other Alli
Tender Value
1.02 Crore
Estimated cost
Bid Submission
10 Nov 2026
9 days left
EMD
2.04 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Road From A-N Road To Sukanta Colony (L=2.316Km) Under The Jurisdiction Of Jatanbari Pwd (R&B) Sub-Division/Sh:-Through-Out Laying Of 30Mm (Thickness Bc Using Paver Machine) ,Vg-30 As Tack Coat,Sand Seal Coating & Other Allied Works During The Year 2026-27 (2Nd Call)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and Grubbing Road Land:- Clearing and grubbing road land including uprooting wild vegetation , grass, bushes, shrubs,saplings and trees of girth upto 300 mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRD Technical Specification clause 201. (II) By Mechanical Means (A) In area of non-thorny jungle |
| 2 | Maintenance of bituminous surface road using Jhama brick aggregate:-Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with B.M (using jhama brick aggregate & bitumen of VG-30), after applying prime coat at the bottom and tack coat on sides and on bottom (using bitumen emulsion) and compacting, trimming & finishing the surface to form a smooth continuous surface, all as per MoRD technical specification Clauses 1900, 502, 503 and 504. |
| 3 | Water Bound Macadam Sub-base/base:-Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405. 2) WBM Grading -3 ( A ) By Manual Means |
| 4 | Prime Coat:-(i)Low porosity :Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.00 kg/sqm using mechanical means as per MoRD Technical Specification Clause 502. |
| 5 | Tack coat:-( iii ) Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface treated with primer & cleaned with Hydraulic broom as per MoRD Technical Specification Clause 503. |
| 6 | Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/ Sqm. |
| 7 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. B. Grading II (For layer thickness 30 - 40 mm) i. With Viscosity Graded Bitumen of VG-30. |
| 8 | Maintenance of Drains The maintenance of drains include erosion, repair, clearing,cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per MoRD technical specification Clause 1907. |
| 9 | Road marking strips (retro-reflective) of specified shade/ colour using Hot Applied Thermoplastic material with Reflectorising Glass Beads on Bituminous Surface: Providing and applying 2.5 mm thick thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm area by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per MoRT&H Technical Specification Clause 803. |
| 10 | Manufacturing & supplying of machine made 4 mm G.I. wire crates chain link type size of cage 1500mm. X 600mm. X 450mm. having square mesh of 80mm. X 80mm. including carrying to the work site as per direction of the Engineer-in-charge ( Weight of each cage shall not be less than 7.80 kg ) |
| 11 | Supplying and stacking mixed class brick bats (50% first class & 50% un-class ) including carriage loading & unloading at the site of work complete as per direction of the Engineer-in-charge. |
| 12 | Labour charge for filling / packing of mixed class brick bats in S.W.G PVC wire crates of size of 1500mm. X 600mm. X 450mm. Fastening with SWG GI wire and placing in river bed / slope properly as per direction of the Engg-in-charge. |
| 13 | Construction of road side pucca drain with M10 (1:3:6 with jhama brick aggregate) to specified lines, grades, levels and dimensions as per approved design and MoRD Technical Specification Clause 307, 1606. Excavatedmaterial to be used in embankment at site. (including centering, shuttering, etc. but excluding reinforcement) A. Kerb & Channel drain (top clear width 600 mm, bottom clear width 150 mm and clear depth of 200 mm) I. In Ordinary Soil |
| 14 | Surface Drains:- Construction of unlined surface drains of average crosssectional area 0.40 sqm in ordinary soil to specified lines,grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307. (i) Surface Drains in Ordinary Soil. (B) Mechanical Means |
| 15 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender