Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #58289428

Tender For Special Repair To Building No. P- 05(Otm Accn) At In 26/3/J C At Yol Mil Stn Under Ge(Kh) Yol.

Issued by Statutory Bodies & Commissions/Committees · Kangra, Himachal Pradesh
Tender Value
58.87 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
9 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Building No. P- 05(Otm Accn) At In 26/3/J C At Yol Mil Stn Under Ge(Kh) Yol.

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO. P- 05(OTM ACCN) AT IN 26/3/J C AT YOL MIL STN UNDER GE(KH) YOL.
Sl. No. Item Description
1Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick bellow or above ground level complete all as specified and directed by Engineer by Charge.
2Machine cut kota stone slab flooring 18-20mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.
3Material & Labour for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm cement screed plaster in CM 1:4 complete all as specified and directed. (Note:- The kota stone on treads & risers shall be fixed in one piece only. No joints shall be provided for steps and risers of stairs. Contractor shall keep this aspect in his mind while quoting his rates)
4M & L for mirror polishing of existing machine cut Kota stone/Marble/Granite flooring including steps of stair, to give high gloss finish complete all as specified and directed.
5M & L for Makarana white marble tiles flooring 100 mm wide and 18-20 mm thick machine cut, over of 15 mm thick screed bed in CM 1:4, bedded jointed and pointed with grey cement slurry including cutting and polishing types , all as specified,Note :(i) Pattern of marble strip shall be approved by Engr-in Charge/GE
6Material & Labourfor PCC 1:2:4 type B-2 (40mm graded aggregate) 75 mm thick, using 20mm graded crushed stone aggregate as in paving, plinth protection etc, surfaces finished even and smooth without using extra cement and dividing into panells not exc 1.20 Mtr all as specified and directed.
7Mat finish (non skid), Premium class I grade, joint free, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.
8M&L for 25mm thick PCC(1:2:4) type B1 using 20mm graded stone aggregate as in floor finished even and rough to received the topping layer complete all as specified.
9Dismantling floor,hearth or wall tiling incl cement morter bedding ( but not backing), removing seviceable tiles to store and rubbish off the premises
10M&L for Glazed coloured white tiles of size 450x300x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified and directed.
11Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling complete all as specified and directed.
12S&F Clip-in false ceiling system with plain steel beveled edged tile (600mmx600mm) manufactured out of 0.50 mm GI sheet having power coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure postive engagement into the spring clip-in profile allowing for demounting of indivual tiles.The rigid suspension system consists of rows of galvanized steel 0.50 mm thick clip- in profile of size 38mm x 20mm and installed at 600 mm c/c spacing to support the tiles clip-in profiles shall be suspended and jointed from galvanized steel 'C' channels of size 10mm x 38mm x10mm with hold on clamps at spacing as specified by manufacture. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacture instructions and jointed to the 'C' channels. The tiles shall be held in place by pressure clips 'C' at spacing as per manufactures instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20 mmx 30 mmx20mm and 0.5 mm thick with matching the color with tiles all as per manufacture specifications/instructions and including necessary scaffolding all as specifed and directed by Engr-in-charge and GE.
13Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed..
14S & F for mild steel roof trusses (framed), trussed, purlins and similar works(beam,Tee,, angle, channel or flat section) including distances pieces, cleats etc conforming to FE-290, Grade E-165 complete all as specified and directed.
15Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer by Charge.
16Supply & fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer by Charge.
17Supply & fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer by Charge.
18Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/ down ward facia/soffits and fins of RCC chajjas /beams/columns/balconies etc. Supply and fixing by means of nailing wire netting of galvanised wire 1.40 mm dia and mesh size 20 mm and brushing neat cement slurry with 3.00 kg of cement/sqm and Material & Labour for 20 mm thick cement rendering in two layers of 10 mm each (top/final layer shall be rendered after final setting of under layer) in Cm 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs. etc complete all as specified and directed.
19Material and Labour for waterproofing of exterior walls, including complete removal of existing plaster including raking out joints and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k). The treatment shall be done from ground level and providing 15mm thick cement plaster in CM 1:4 finished even and fair complete all as specified and directed. Note: The above specification of work for exterior painting shall be guaranteed as per menufacturer Performance Warranty and to be executed only by applicator authorised by original equipment manufacturer Make: \\"ASIAN PAINTS/BERGER/NEROLAC\\"
20Taking down cement plaster of any description and any thickness on brick/stone/concrete surfaces scrubbing down with water etc complete all as specifed and directed.
21Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 and finished surface even and fair without using extra cement (External surfaces) complete all as specified and directed by Engineer in Charge.
22Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 and finished surface even and smooth without using extra cement (Internal surfaces) complete all as specified and directed by Engineer in Charge.
23M&L for 10mm thick plaster in CM 1:3 on ceiling all as specified and directed finished even and smooth without using extra cement.
24Material and Labour for exterior painting work including complete preparation of newly/ Old Plastered Surface plastered surface and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding these surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as specified and directed.Note: The above specification of work for exterior painting is guaranteed as per manufacturer Performance Warranty and to be executed only by applicator authorised by original equipment manufacturer Make: \\"ASIAN PAINTS/BERGER/NEROLAC\\"
25M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over primer over 2mm thick wall care putty over plastered surface complete all as specified and directed by Engineer in Charge.
26M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over primer over 2mm thick wall care putty over plastered surface complete all as specifeid and directed by Engineer in Charge.
27M&L for preparation of new plastered surfaces of ceiling and applying three coats of white all as specified and directed.
28M&L for complete removal of exisiting treatment of ceiling surfaces and applying three coats of white all as specified and directed.
29Taking downchowkhat with shutter with n.exc. 1.50 Sqm (without taking off shutters from the frame) and removing from site all as specified and directed.
30Supply & fixing Box Type Steel window 1.25mm thick box type (Primer Coated) ERW hollow P section of size 60mm x 25mm double rebated comprises gauged/glazed skelton shutter ERW sec 50mm x 20mm and 1mm thick with one or two openable leaf as directed consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, four Nos for each window including following fitting welded to frame shutter.(i) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window.(ii) Handle of Z sec 20mm x 25mm, 100mm long-1 No Per. Leaf.(iii) MS tower bolt 150mm long-2 No per leaf(iv) Z Sec 20mm x 25mm, 100mm long stopper-1 No per leaf.(v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm weldeg to hinge-1 No per leaf.(vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf. (vii) Fabrication & fixing arrangement as per drg No. CEPZ TD-26/13 (viii) 10mm Sq bar arrangement as grill (ref TD) included in this item .
31S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. all as specified and directed by Engineer-in-Charge.
32S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
33Taking down chowkhat with shutter exc. 1.50 Sqm but n. exc 4 Sqm but with shutters (without taking off shutters from the frame) and removing from site all as specifed and directed.
34S&F pressed steel frames size 125x60mm for doors with one or more rebates including necessary fixing lung, hings, lock strike plate etc. complete all as specified.
35S&F pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lung, hings, lock strike plate etc. complete all as specified.
36M&L for PCC type C-1 (1:3:6) using 20mm graded curshed stone aggregate as in filling in door frame and mass concrete etc complete all as specified.
37Supply & fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
38S&F 35mm thick IInd class hard wood glazed and skeleton shutter open rebated prepared to receive glass gauge etc without sash bars for securing glass , gauge etc size of members of shutters as specified in SSR Part –I section 8 clause 8.24(a) all as specified and directed.
39M&L for preparation of new wooden surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
40Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glass with putty or fixed with beads.
41S&F 3 mm thick sheet glass ordinary quality and glazing not.exc 0.50 sqm each pane fixed in wood or steel frames with oil putty or wooden beads all as specified and directed.
42S&F Stainless steel wire cloth 0.36mm nominal dia of wire and any width of aperture 1.40 mm fiixed in wood or steel frame of any descriptioncomplete all as specifed and directed.
43Supply and Fixed in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and any width of aperture 1.40 mm fiixed in wood or steel frame of any descriptioncomplete all as specifed and directed.
44M&L for preparation of new steel surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
45M&L for preparation of old steel surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint all as specified and directed.
46S&F aluminium handle, cast type, anodised 150mm long.
47Supply & fixing for 200mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
48S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.
49S & F in repair brass door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
50S & F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed.
51Supply & fixing for 150mm long aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
52Supply & fixing 125mm long aluminium handles, cast type anodised complete all as specified and directed.
53Taking up or down steel tubing 15mm bore including cleaning for re-fixing or removing to store.
54Taking up or down steel tubing 20mm bore including cleaning for re-fixing or removing to store.
55Taking up or down steel tubing 25mm bore including cleaning for re-fixing or removing to store.
56S&F GI steel water tubing medium grade 15mm bore as in any lengths with all fillings & fixed complete to walls or floor as specifed and directed.
57Ditto all as per item No 56 above here-in-before but 20mm bore pipe.
58S&F GI steel water tubing medium grade 25mm bore as in any lengths with all fillings & fixed complete to walls or floor as specifed and directed .
59S&F GI spout pipe 40mm dia long medium grade incl making holes in walls & making good disturbed surfaces complete all as specified and directed.
60Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repair, all as specified and directed.'
61S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.
62PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 450 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, all as specified and directed.
63S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge
64S&F in repair counter type vitreous china wash basin premiun quality of size 610x 385x 130mm including brackets waste coupling & Pipe of 32 mm dia and fixed with including all connected items complete all as specified and directed.
65S&F in repair stop valves/angle valve 15mm bore, cast copper alloy, fancy type cromium plated screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions.
66Ditto all as per item no 65, but with long shank and cup (concealed type)
67S&F in repair Bibtaps 15mm bore, fancy type cromium plated with butterfly handle, screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions.including wall flange complete all as specified and directed.
68S&F in repair Brass CP mixer (i.e, wall mixer/ sink mixer) for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specifeid and directed by Engineer in Charge.
69S&F in repair Brass cromium plated shower rose 125 mm size with swivel joints including fixing to steel pipe or union complete all as specified and directed.
70S&F in repair Sheet glass shelf assembly consisting of 50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
71Supply & fixing in repair CP soap dish 150mm size complete all as specified and directed by Engineer-in-Charge
72S & F in repair brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
73S&F PVC connections 15mm, 450mm long with PTMT nuts washers etc complete all as specified and directed.
74S&F 6mm thick mirror of any size including rounding and polishing of edges adjust with Direct mounting SS Mirror screws and all necessary fittings complete all as specified and directed.
75S& F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia of outlet complete all as specified and directed.
76S&F in repair 25 mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
77Dismantling of CI/PVC pipe 75/100 mm bore fixed to wall or laid in floor or trenches inculding connection all as specified and directed.
78S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
79As as per item no 78 here-in-bore but 75mm bore pipe
80S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
81As as per item no 80 here-in-bore but 75mm bore pipe
82S&F cast PVC (SWR) bends any radius for 110mm bore pipe complete all as specified directed.
83S&F cast PVC (SWR) bends any radius for 75mm bore pipe complete all as specified and directed.
84S&F for PVC (SWR) junction single, (Single T) equal or unequal for 110mm bore pipe complete all as specified and directed.
85S&F for PVC (SWR) junction single, (Single T) equal or unequal for 75mm bore pipe complete all as specified and directed.
86S&F for PVC (SWR) vent cowl for 110mm bore pipe complete all as specified and directed.
87Taking down existing water proofing treatment( if any) including cleaning with wire brushes roughening the surface and hacking out dirt, where directed and disposal of rubbish and apllying 15 mm thick (average) screed bed/ plaster in cement mortar 1:4 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete, all as specified and directed. (Note:- WPC and polymeric membrane shall be measured and paid separately)
88APP (Atactic Poly-propylene polymer) modified membranes, five layered, 4 mm thick weighing not less than 4.0 kg/ Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacture's instructions by authorised applicator only after applying evenly a coat of bitumen VG-10 grade @ 1.20 kg per sqm on the bottom of APP and on top of joints of APP complete all as specified and directed.
89Supply only liquid water proofing compound complete all as specified.
90S&F in repair Vitreous china bowl urinal flat back, size 465x355x265mm white (minimum), including grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing 5 ltr automatic flushing cistern with bracket , flush pipe grating and union for discharge pipe.
91Providing and laying of water proofing treatment to sunken floor portion including vertical portion by applying cement slurry mixed with acrylic based polymer modified cementenious composite compound of make as specified and including demolition and PCC 1:2:4 type B1( 20mm graded crushed stone aggregate) as subbase, sides of rounded or chamfered on edges of sunken slab and PCC 1:5:10 type E2 (Using 40mm graded aggregate) for filling of sunken floor after treatment. (a) First layer of cement slurry of cement @ 0.488 kg/Sqm mixed with acrylic based primer modified cementtenious composite compound @ 0.253 kg/Sqm. this layer allowed to air cure for 4 hrs. (b) Second layer of cement slurry of cement @ 0.242 kg/Sqm mixed with acrylic based modified cementenious composite compound @ 0.125 kg/Sqm. this layer allowed to aircure for 4hours. (c) the slope shall be 1 in 20 towards first corner of outer wall and GI pipe of dia 50mm (Med grade ) be inserted at corner projecting outside 20cm. (d) 15mm thick plaster in CM 1:3 mixed with WPC to be provided while concrete is in green state. (e) Joints of traps/ WC/ Soil pipes shall be properly sealed with sealing compound.
92Note : Concrete for sunken slabs shall be mixed with WPC as manufacturers instruction before carrying out water proofing treatment the sunkenslab shall be tested with water for 48 hrs for any leakage/ dampness seen in ceiling below, then treatment is carried out to RCC slab and it is again tested before passing for next stage. (Water Proof compound rate shall not be paid seperately)
93S & F rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, all as specified and directed.
94Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in any type of soil complete all as specified and directed by Engineer in Charge.
95Returning Filling in soil including spredaing, levelling, watering & well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed by Engineer in Charge
96Removing of excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by the Engineer-in-charge
97Demolition and breaking up 150mm dia, drain pipes (PVC, Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar any size and in any position including all fitting complete all as specified and directed by Engineer in Charge.
98M&L reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed by Engineer in Charge.
99M&L for cement concrete 1:4:8 type D2 as in concrete bed to drain pipes including packing under and completely surrounding pipes of 150mm bore with concrete after they are laid and tested in complete all as specified and directed by Engineer in Charge
100M&L for Cement concrete in foundations, filling and mass concrete type C2 1:3:6 (40 mm graded crushed stone aggregates) all as specified and directed.
101M&L PCC(1:2:4) type B-1 using 20 mm graded stone aggregate as in coping/benching rounded chamfered angles and throating complete all as specified and directed by Engineer in Charge.
102Material & Labour for pre cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in pre cast deck slabs, shelves, cover to man holes, etc and similar works bedded and jointed in cement mortar 1:4 including form work complete all as specified and directed by Engineer in Charge.
103Demolition of brick work or stone boulder masonry built in cement or cememt lime mortar
104Brick work with Subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
105M&L for walling of random rubble , uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.
106Demolition of reinforced cement concrete of any description.
107M&L for nominal mix RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in slab supported on walls,beams and columns in flors, roofs landing,balconies,canopies,deck slabs and in shelves lintel/roof band and the like complete complete all as specified and directed by Engineer-in-Charge.
108M&L for MS TMT bars 10mm dia and over cut to length,bent to shape required incl. cutting,cranking,hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.
109M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes CM 1:6 complete all as specified and as direceted.
110Rounding to edges of stone/kota/marble/granite slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer in Charge.
111M&L for PCC 1:3:6 (Type C2) using 40mm graded stone aggregate as in surface chanel and drains all as specified.
112M&L extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed by Engineer in Charge.
113S&F 20mm dia stainless steel curtain rails with fixing and brackets, stops , rollers and fixed to walls complete all as specified and as directed.
114Taking down carefully the existing aluminium/copper point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets, ceiling rose, fan regulators, lamp holders, call bell, bell pushes any type etc by unscrewing and taken away from site complete and make good the disturbed surface as existing.
115Taking down sheet metal enclosure DBs, main switch board etc and making good disturbed surface to match with existing surface complete all as specified.
116M & L for point wiring with 1.5 sqmm (Nominal Area) FRLSH PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including concealed PVC conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including concealed MS pressed steel (Modular sunken box) terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and Modular cover plate as top cover (ISI marked) including continuous earth wire FRLSH PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/Exhaust fan/ceiling fan point /call bell/security light / controlled by one switch Please Enable Macros to View BoQ information
117M & L for point wiring with 1.5 sqmm (Nominal Area) FRLSH PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including concealed PVC conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including concealed MS pressed steel (Modular sunken box) terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and Modular cover plate as top cover (ISI marked) including continuous earth wire FRLSH PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/Exhaust fan/ceiling fan point /call bell/security light / controlled by one switch Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58289428
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 58.87 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Building No. P- 05(Otm Accn) At In 26/3/J C At Yol Mil Stn Under Ge(Kh) Yol.
Basic Detail
Tender No CWE/Y-60/2026-27
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 30 Oct 2026
Submission Date 27 Nov 2026
Open Date 04 Dec 2026
Finance
Tender Value 58.87 Lakhs
Tender Fee 1000
EMD 1.13 Lakhs
Exemption Available
Document List
38e58d78-8085-4c02-a908-31dc1d1fa9a1.html
BOQ_893415.xls
E-tender60.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 30, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

38e58d78-8085-4c02-a908-31dc1d1fa9a1.html

xls

BOQ_893415.xls

pdf

E-tender60.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender