Tender For Repair/Improvement To Road Protective Works (Berm/Road Shoulder) And Replacement Of Certain Road Furniture At Kannur And Calicut Mil Stns Under Ge (Army) Trivandrum
Tender Value
33 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
15 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Improvement To Road Protective Works (Berm/Road Shoulder) And Replacement Of Certain Road Furniture At Kannur And Calicut Mil Stns Under Ge (Army) Trivandrum
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing debris outside MD land complete all as specified and as directed. |
| 2 | M&L for PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 3 | M&L for 100mm thick PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in sub base of floor finished even and rough to receive top layer complete all as specified and directed. |
| 4 | Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20mm thick screed bed in cement mortar 1:6 etc complete all as specified and as directed |
| 5 | M&L for sand filling/ cushioning under floors or in foundations, well ramming including watering and consolidation complete all as specified and directed. |
| 6 | M&L for machine pressed precast concrete interlocking coloured paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 7 | M&L for preparing of new or previously treated road surfaces to receive painting lines, dashes, arrows, letters, etc. on road pavements and the like to delineate the roads properly and indicate warnings and directions using white/ yellow thermostatic road marking paint @ 5 Kg/ Sqm, mixed with glass beads @ 250 Gm/ Sqm, overall thickness measured 2.50 mm, applied by mechanical means i.e, dispenser machine complete all as specified and directed. |
| 8 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 9 | Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified anddirected |
| 10 | M&L for repair to potholes any depth, not exceeding 1 Sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 sq m, paving bitumen (VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed. |
| 11 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer at 5 Kg per 10 Sq metre using paving bitumen VG-30 complete all as specified and directed. |
| 12 | M&L for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient with 8 to 10 tonne capacity power roller complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender