Tender For Special Repairs To Bldg No. P-73 (Ors Md Accn), P-10(Pers Line-I To Rec Room), P-3,Bd-11 And A-1 At Mh Dalhousie Under Age(I) Dalhousie.
Tender Value
71.54 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
23 days left
EMD
1.32 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No. P-73 (Ors Md Accn), P-10(Pers Line-I To Rec Room), P-3,Bd-11 And A-1 At Mh Dalhousie Under Age(I) Dalhousie.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheets any gauge thickness including Nanital or similar pattern roof covering including ridges complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 4 | M&L for dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed. |
| 5 | S&F Aluminium anodized snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with utterfly clips, wall angle of size 24 x 24mm, main runner (teee) of size 24 x 38mm, cross tee of size 24 x 28mm, (No of suspenders shall be decided by the AGE (I) as per actual size requirement) Perforated particle board of 12mm thick for insula-tion and accoustic purposes, as in ceilings flat or sloping 60x60 cm in size complete all as specified and directed. |
| 6 | M&L for demolition of cement concrete in ground floor and paving n.exc 15 cm thick above or below ground level (unreinforced) complete all as specified and directed. |
| 7 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection 75 mm thick incl finished even & smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for cement concrete 1:2:4 type B1 ( using 20 mm crushed stone agg.) as in floor 40 mm thick as levelling course rough finish to receive top finishes complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed. |
| 10 | M&L for Mat finish, premium quality, joint free (edge cut), coloured/ printed non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile 0.18 sqm but n.exc 0.38 sqm, as in floors etc. set and jointed in neat cement slurry over 15mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, complete all as specified and directed by Engr-in Charge. |
| 11 | M&L for vitrified tiles 8-10 mm thick ( Square or rectangular) polished, double charged area of each tile not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) all as spd and directed . |
| 12 | M&L for light shade vitrified tiles 8-10 mm thick ( Square or rectangular) polished,double charged area of each tile not exceeding 0.36 sqm in dado, skirting and like that set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick base coat in CM (1:6) all as spd and directed. |
| 13 | M&L for glazed ceramic coloured tiles 350x250x7/ 450x350x7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry over 10mm screed bed or bedding layer CM 1:3 & pointed in colour cement to match complete all as specified and as directed. |
| 14 | M&L for Machine cut kota stone in flooring 20-25 mm thick over and incl 20mm th cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete all as spd and directed. |
| 15 | M&L for Machine cut kota stone in flooring 20-25 mm thick over but in riser, skirting, dado and pillar laid over 10 mm thick rendering in cement mortar 1:4, laid and jointed with grey cement slurry including rubbing and polishing complete all as specified and directed. |
| 16 | M&L for granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window cills, cooking platforms and like in 20 mm thick screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 17 | M&L for cutting, rounding of edges and mirror polishing, of granite /marble/kota stone complete all as specified and directed. |
| 18 | M&L for demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc complete all as specified. |
| 19 | M&L for fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in CM 1:6 all as specified and directed. |
| 20 | M&L for brick work straight or curved on plan exceeding 6m mean radious built in CM 1:6 Except Brick all as specified and directed. |
| 21 | M&L for PCC 1:2:4 type B1using 20 mm graded stone aggregate as in coping and the like including weathering, slightly rounded or chamfered angle and throathing including necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directe. |
| 23 | M&L for rendering 15mm thick cement plaster concrete surfaces or fair faces of brick work in CM (1:6) surface finished even and smooth w/o using extra cement complete all as specified and directed. |
| 24 | M&L for rendering 15mm thick cement plaster on concrete surfaces or fair surface face of brick work in CM 1:4 surface finished even and fair without using extra cement complete all as specified and directed. |
| 25 | Supply only integral water proofing compound. |
| 26 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over a coat of chalk whiting complete all as specified and directed. |
| 27 | M&L for preparation of newly plastered surface of wall and applying two coat of 100 % acrylic smooth emulsion exterior grade with silicon additives and anti-fengal poperties (Apex Ultima Suprema) over one coat of smartcare waterproof primer (Damp prime suprema) on walls and chajja with 10 % of dilution of water over water proof cement based putty @ 2 kg (undiluted) per Sqm of average thickness 2mm over silicon additives and sanding the surface for removal of loose particles, Tint and shed of the building as directed by Engr-in Charge. |
| 28 | M&L for preparation of old surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 29 | M&L for preparation of old surfaces of wall and applying two coat of 100 % acrylic smooth emulsion exterior grade with silicon additives and anti-fengal poperties (Apex Ultima Suprema) over one coat of smartcare waterproof primer (Damp prime suprema) on walls and chajja with 10 % of dilution of water over water proof cement based putty @ 2 kg (undiluted) per Sqm of average thickness 2mm over silicon additives and sanding the surface for removal of loose particles, Tint and shed of the building as directed by Engr-in Charge. |
| 30 | S& F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 31 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (including waste pipe and waste coupling) complete all as specified and directed. |
| 32 | Supply & fixed in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of lime complete all as specified and directed. |
| 33 | S&F in repair PVC valveless syphonic action type low level flushing cistern 10ltr capacity white with all internal fittings and CP handles knob/push including brackets PVC connection 45cm long including nut and PVC washer at both ends with brass chromium plated coupling 32mm bore including 32mm bore PVC long bend flush pipe 90cm long complete all as specified and directed. |
| 34 | S&F in repair brass CP Mixer,15mm dia fancy type screwed down high pressure, with or without lettered \\"Hot or \\"cold: with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified for WHB, Sink & Bathroom complete all as specified and directed. |
| 35 | S&F in repair CP Stop valve/Angle valve 15mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure,screwed both ends for pipe or for unions complete all as specified and directed. |
| 36 | S&F in repair CP Bib tap, 15mm dia, cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed in repair all as specifiedscrewed for iron pipe or brass ferrule complete all as specified and directed. |
| 37 | S&F in repair CP tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 38 | S&F in repair 600 x 450 mm bevelled edges mirror 5 mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated screw and cup washers complete all as specified and directed. |
| 39 | S&F in repair 15 mm bore PVC connection with PTMT of length 450 mm complete all as specified and directed. |
| 40 | S&F in repair 15 mm bore brass CP shower rose 125 mm size and complete all as specified and directed. |
| 41 | S&F GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down steel tubing of 15mm complete all as specified and directed. |
| 42 | S&F GI tubes medium grade 20mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down steel tubing of 20mm complete all as specified and directed. |
| 43 | M&L for cutting chases, pinning in making good to facing where required and pointed in CM 1:3 to ends or edge of landing, steps cills, sunshade, shelves etc and cutting chases for concealed water tubing in stone concrete block or slab walls etc and making good cutting n exc 10 cm girth complete all as specified and directed. |
| 44 | S&F rotational moulded High Density Poly-Ethylene water storage tanks of capacity 500 litre and conforming to IS, hoisted and fixed in position including dismantling of old water tanks capacity exc 250 ltrs but n.exc 500 ltrs in any position and removing from the site or to store complete all as specified and directed. |
| 45 | S&F in repair Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pepe or brass ferrule for bore of pipe 20mm, complete all as specified and directed. |
| 46 | S&F in repair CP Stop valve 20mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure,screwed both ends for pipe or for unions fixed complete all as specified and directed. |
| 47 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 48 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410 W (Gde-E-250) quality B complete all as specified and directed. |
| 49 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically complete all as specified and as directed. |
| 50 | Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 51 | S&F stainless steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 52 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 53 | M&L for preparation of new steel or iron surfaces of any description, and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 54 | M&L for taking down chowkats or frames incl shutters (without taking off shutters from frame) n exc 1.5 Sqm complete all as specified and directed. |
| 55 | M&L for taking down chowkats or frames incl shutters (without taking off shutters from frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed. |
| 56 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and directed. |
| 57 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and directed. |
| 58 | S&F flush shutters, 35 mm thickness solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified. (Make : Swastik Ply Wood, Century Plywood or equivelent) |
| 59 | S&F IInd class hard wood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass or gauze etc (divided into squares) and fitted to chowkats, edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing glass as specified in SSR Part-I section 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed. |
| 60 | S&F Solid single PVC door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 61 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, Including Iron Mongery supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 62 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed |
| 63 | M&L 150 mm size Aluminium handle, cast type, anodised and fixed. |
| 64 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and stape ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 65 | S&F for 300mm, Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete supply & fixed complete all as specified and directed. |
| 66 | M&L for preparation and applying two coat of synthetic enamel paint over a coat of pink primer on new wood or wooden surfaces of any description over 10cm in width or girth not otherwise described complete all as specified and directed. |
| 67 | S&F Block boards, grade 2 quality 18/19mm thickness inerior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed. |
| 68 | S&F Hasp & staple, aluminium anodised, including bolt to hinge plate and fixed ith screws 100 mm size complete all as specified and directed. |
| 69 | Demolition and breaking up 110/75mm old broken PVC (SWR), AC, SWG soil waste and vent pipe including accessories set in cement mortar complete all as specified and as directed. |
| 70 | S&F of 110mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed. |
| 71 | S&F of 75mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed. |
| 72 | S&F 110 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius complete all as specified and directed. |
| 73 | S&F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius complete all as specified and directed. |
| 74 | S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 75 | M&L Machine cut kota stone in flooring 18-20mm thick over and incl 20mm th cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete all as specified and directed. |
| 76 | Machine cut kota stone in flooring 18-20 mm thick over but in riser, skirting, dado and pillar laid over 10 mm thick rendering in cement mortar 1:4, laid and jointed with grey cement slurry including rubbing and polishing complete all as specified and directed. |
| 77 | Dismantling timber scantlings 40 sq. cm and over in section, in any position all as directed. |
| 78 | Dismantling boarding, any description, fixed in any position with nails and screws all as directed. |
| 79 | Clean sawn with butt joints Boarding20 mm thick second class soft wood supplied & fixed with nails in any situation (except flooring and skirting) Planed both sides all as specified and directed. |
| 80 | M&L For Timber framed and fixed Clean sawn Second class soft-wood in scantlings all as specified and directed. |
| 81 | M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil all as specified and directed. |
| 82 | M&L for 75 mm thick PCC type C2, 1:3:6 (40mm graded crushed stone aggregate) in Sub -base, floor and pavings etc complete all as specified and directed. |
| 83 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed. |
| 84 | M & L for screed bed or bedding layer of mortar 15 mm thick in CM (1:4) for laying floor finishes |
| 85 | M&L For Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 86 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe Wash down water closet (Pedestal pattern) complete all as specified and directed. |
| 87 | S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 88 | S & F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal complete all as specified and directed. |
| 89 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 90 | S & F in repair Vitreous China wash hand basin, white, flat back, size 550x400mm excluding taps, waste coupling, chain and plug and porcelain stopper but including brackets & waste pipe complete all as specified and directed. |
| 91 | S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm dia bore complete all as specified and directed. |
| 92 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 93 | S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws |
| 94 | S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed by Engr-in Charge. |
| 95 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mm length of cover plate |
| 96 | Taking down carefully copper/aluminium point wiring (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc. |
| 97 | M & L for Modular point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size(two run with colour code RYB) for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm (as continous earth wire Green)multistrand PVC concealed conduit of approved size and quality ISI marked,including all other required accessories as specified in preamable 1(a) to (q) of section 19 of SSR Part-II under heading 'point wiring' fixedon wall/ceiling including sunk cast iron terminal boxes grouting/flushing on wall for mounting fittings like switch,sockets etc covered with 3.00 mm thick plastic laminated sheet top cover of brick masonary/Stone masonary wall complete including cutting,chasing,pinning and making good the disturbed surface by using cement mortar 1:3 complete all as specified and directed by Engr-in-charge.(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plaster and matching the surface by white wash/colour wash all as per existing finishes complete). |
| 98 | All as per Srl item No 97 here in before but for one light point controlled by two way switch,with cables 1.5 sqmm size. |
| 99 | All as per Srl item No 97 here in before but for one 5 amps socket outlet on same board. |
| 100 | All as per Srl item No 97 here in before but for one 5 amps socket outlet on independent board. |
| 101 | All as per item No 97 above but for power point 3 pin switch socket 16 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm (two run with colour code RYB) on independent board including one run of 2.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in concealed PVC conduit of appropriate size and best quality ISI marked, including all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading \\"Point wiring\\" fixed on wall including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed. |
| 102 | Supply & Fixing in replacement of modular Switch one way 6 Amps,1 module |
| 103 | Supply & Fixing in replacement of modular Socket outlet ,6A 2/3 pin combined 2 module. |
| 104 | Supply & Fixing in replacement of modular Switch one way 16 amps,1 module |
| 105 | Supply & Fixing in replacement of modular Socket outlet 6A/16A -2/3 pin combined 2 module. |
| 106 | Supply & Fixing in replacement of modular Switch two way 6 Amps,1 module |
| 107 | Supply and fix in replacement of ceiling rose 65X50 mm two to three terminals complete all as specified and directed. |
| 108 | S & F ding dong door bell electric suitable for AC 230 volt, single pole complete a all as specified and directed by Engineer-in-Charge. |
| 109 | Supply &Fixing modular Bell push 6 Amps,1 module |
| 110 | S & F in replacement of unserviceable tube light fitting with wall mounted LED integrated batten fitting inverter type 20 W LED T-5, 4 feet, 6500K ,PVC extruded.Including supply and fixing square Box and all accessories complete all as specified and as directed by Engr-in- charge. |
| 111 | S & F LED light fitting mirror type with high out put diffuser 2 feet ,10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 112 | Supply and fix in replacement of Decorative wall light fitting with LED BULB 1x 09/10 Watt make Havells decorative light cat part No LHFOAJE1TN1I060 or equivalent of Philips/Bajaj or CG. |
| 113 | Sheet metal enclosures for TPN DBs when MCBs to be used, triple pole and neutral, 4 way, double door, 415 volts with 200 Amp rated bus bar including taking down ICDP/ DB's any type, kit kat fuse, MCB's any type, complete all as specified and directed. |
| 114 | Supply and fixing in replacement of MCB triple pole and nuetral 63 Amps, 415 volts complete all as specified and directed. |
| 115 | Supply & Fixing in replacement of Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 8 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's any type including taking down of kitkat fuse/MCB SPN/SP as directed by Engineer-in-charge. |
| 116 | Supply and fixing in replacement of MCB single pole and nuetral 6 to 32 Amps, 240 volts complete all as specified and directed. |
| 117 | Supply and fixing in replacement of MCB single pole 6 to 32Amps, 240 volts complete all as specified and directed. |
| 118 | M & L for sub main wiring with 4.0 sqmm copper conductor cable multistrand, FRPVC sheathed two run (as phase and neutral) and run 4.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one pvc concealed wiring complete all as specified and directed by Engr-in-charge.(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. |
| 119 | Disconnecting and taking down of Exhaust fan of 300/450 mm of any make/model from existing position and refixing in same position after cleaning with suitable chemicals and materials and spray painting and refixing to the existing position by means bolt,replacement connection lead wire complete all as spaciifed and directed. |
| 120 | Disconnecting and taking down of Geysers (water heater) of capacity 25/50 Ltrs horizontal/vertical of any make/model from existing position and refixing to the existing position by means of anchor bolt,PVC connection,replacement of plug Top,connection lead wire,indicator lamp (whatever is required at site) complete all as spaciifed and directed. |
| 121 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optice complete with IP 65/66 protection complete all as specified and as directed by Engr -in- charge. |
| 122 | Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC (1:2:4), type B-I using 20mm graded crushed stone aggregates with 40mm thick precast cover of size 550 mm X 550 mm X 75 mm of RCC (1:2:4), type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. |
| 123 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, White recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 124 | M & L for point wiring in replacement with copper conductor cable multistrand, PVC unsheathed 1.5 Sqmm size FRLS for one light point controlled by one switch including one run of 1.5 Sqmm multistrand FRLS PVC unsheathed copper conductor cable for earth continuity in and including PVC casing and capping of approved size,make and quality ISI marked, including providing suitable size of copper lugs and all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading 'Point wiring' fixed on walls/ceiling including sunk cast iron boxes concealing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover including taking down carefully existing old unserviceable copper/aluminium point wiring of any type (light/fan/socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc including finishing white wash to match with existing surface all as specified and directed. |
| 125 | All as per Srl item No 124 here in before but for one 5 amps socket out let on same board. |
| 126 | All as per Srl item No 124 here in before but for one 5 amps socket out let on independent board, |
| 127 | All as per item No 124 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5.0 Sqmm FRLS on independent board including one run of 2.5.0 Sqmm multistrand FRLS PVC sheathed copper conductor cable for earth continuity in and including PVC casing and capping of appropriate size makes and best quality ISI marked, including CI/Pressed steel sunk box and providing suitable size of copper lugs and all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading \\"Point wiring\\" fixed on wall including sunk cast iron boxes concealing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed. |
| 128 | Supply & Fixing in replacement Switch piano, flush button, single pole one way 6 amps. |
| 129 | Supply & Fixing in replacement Socket outlet 3 pin, 6 amps flush type. |
| 130 | Supply & Fixing in replacement Switch piano, flush button, 16 amps single pole one way. |
| 131 | Supply & Fixing in replacement Socket outlet 2 in 1,3 pin 5 and 16 amps flush type. |
| 132 | S & F in replacement of unserviceable tube light fitting with wall mounted LED integrated batten fitting inverter type 20 W LED T-5, 4 feet, 6500K ,PVC extruded.Including supply and fixing square Box and all accessories complete all as specified and as directed by Engr-in- charge. |
| 133 | Taking down of electric water heater and deposited to AGE E/M store for recommended for BER all as specified and directed. |
| 134 | Supply and fixing electric geyser of capacity 25 lts, 5 star rated, including two Nos of 400 mm long hot and cold PVC Connection including grouting of Nuts, bolts & washer on wall complete all as specified and as directed by Engr-in-charge. |
| 135 | Taking down of exhaust fan and deposited to AGE E/M store for recommended for BER all as specified and directed. |
| 136 | Supply & fixing Exhaust fan size 300 mm sweep heavy duty Steel body complete with louvers and all fixing accessories including making hole in wall comptete fixing arrangement in any condition and connection complete. all as specified and directed by Engr-in-charge. |
| 137 | Supplying and fixing 4 way double door, single pole and neutral ,sheet steel ,MCB distribution board ,240V ,on surface /recess,complete with tinned copper bus bar, neutral bus bar ,earth bar , din bar, interconnections,powder painted including earthing etc as required.(But without MCB/RCCB/Isolator) |
| 138 | M&L and jointing testing and commisioning in replacement XLPE LT UG Cable Size 3.5 core 25 Sqmm insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall etc and including taking down old unserviceable cables complete all as specified and directed by Engr-in--charge. |
| 139 | Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil, complete all as specified and directed. |
| 140 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm, complete all as specified and directed. |
| 141 | Removing excavated materials/ soils, not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed. |
| 142 | Sand cushioning to under ground cables provided with a layer of sand 8 cms thick before laying the cable and 15 cms thick after laying the cable complete all as specified and directed. |
| 143 | Sub class \\"B\\" bricks for covering to cable laid dry flat, with width equal to length of bricks all as specified and directed. |
| 144 | GI pipe light grade of size 40 mm dia laid in trenches/ walls including clamps, screws etc, complete all as specified and directed. |
| 145 | Deduct Credit Amount as per Schedule of credit as details given on Sal Page No 29&30 of tender doucments. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender