Tender For Ete Water Cooler & Submersible Pump (1.50 H.P)
Tender Value
19.94 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
5 days left
EMD
20000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Moradabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ete Water Cooler & Submersible Pump (1.50 H.P)
BOQ
| Sl. No. | Item Description |
| 1 | Dismentling doors and window leaves excluding chawkhats including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 mts. DSR No-5.12.2 |
| 2 | Dismantling Reinforcement cement concrete including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 mts. DSR No-15.3 |
| 3 | Dismentling B/W and and Stacking of dismanteld materials as directed by Engineer incharg with distance 60 mts ..complete item DSR-15.7.4 |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubish to the dumping ground with in 50 mtr lead. |
| 5 | E/W in excavation in foundation in ordinary soil lift upto 1.50 mt……….complete item.D.S.R No2.2.1 |
| 6 | Cement Concrete with 4 cm. Gauge approved stone aggregate ,fine sand &cement in proportion of 8:4:1 ……………..complete item. D.S.R No-4.1.8 |
| 7 | R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:2:4 in Foundation work , but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the work including cost of binding ,DSRNo-5.1.3A |
| 8 | R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Beam work , but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the work including cost of binding ,DSR No-5.1.3 |
| 9 | R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Column , but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the work including cost of binding wire.DSRNo-5.1.2 |
| 10 | M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item. DSRNo-5.22.1 |
| 11 | Class 150 brickwork in 1:4 cement mortor in Super structure DSRNo-6.1.1 |
| 12 | 12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete,DSRNO-13.1.1 |
| 13 | Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete.chapter 15 serial no-31 |
| 14 | Distempring with 1st qualityAcrylic distemper(ready mix) including all materials labours T&P etc all complete.DSRNO-13.41 |
| 15 | Providing and fixing of 100mm dia PVC rain water pipe with PVC bend and shoe etc all complete. |
| 16 | Providing and fixing factory made UPVC White colour casement cumfixedglazed windows comprising of UPVC multi chambered frame,sash and mullion(where ever required)extruded profile duly rien force with 1.60+_0.2 mm thick……etc all complete.DSR /PED Spec.No-9.147A |
| 17 | Providing and laying 600x600mm vitrified tiles with 20 mm thick cement mortar….complete item DSRNo-11.41.2 |
| 18 | Providing and laying Polished Grinite stone flooring in required design and pattern 18 mm thick base of cement mortar1:4 (1cement :4 coarse sandmortar….complete item DSRNo-11.56.1 |
| 19 | M.S. or iron work in small size sections as in grill……complete item sch-10.1 |
| 20 | Providing and fixing 35mm thick flush door shutter as per requirement with an average wall thickness of 1mm etc all omplete. (DSR 9.21.1) |
| 21 | Painting 2 coat of approved superior quality ready mixed enamel paint on previously painted old wood or steel work including all materials, labours, T&P etc all complete. (DSR No-13.48.2) |
| 22 | Prviding and fixing ISI marked MS heavy weight butt hinges (125mm) with necessary screw etc all complete. (DSR 9.56.1) |
| 23 | Prviding and fixing ISI marked Oxidised MS sliding door bolts (size 300x16mm) with necessary nut and bolts etc all complete. (DSR 9.62.1) |
| 24 | Prviding and fixing ISI marked bright finished brass floor door stopper with necessary screw etc all complete. (DSR 9.82) |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (DSR 18.8.4) |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. (DSR 18.8)15mm nominal outer dia pipes |
| 27 | 20mm Nominal outer dia pipes |
| 28 | 25mm Nominal outer dia pipes |
| 29 | Providing and fixing of SWR PVC Nahani trap etc all complete. |
| 30 | Providing and laying Kajaria or equivalent brand floor tiles over 20mm thick base of cement mortor (1:4) laid and jointed with white cement slurry. |
| 31 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR 17.1.1) |
| 32 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (DSR 17.7.8) |
| 33 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. (DSR 17.16A) |
| 34 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia (DSR 17.32.1) |
| 35 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : (DSR 18.49.1) |
| 36 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (DSR 18.53.1) |
| 37 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17.1)25 mm nominal bore |
| 38 | Construction of teen shed |
| 39 | R.C.C work in foundation with cement C:Sand & 20mm stone grit 1:2:4 incl. all labour & material.(S.I.NO-283-A) |
| 40 | MS Iron work for RCC work including all material labour and T&P etc. As per S.I No-504 |
| 41 | M.S iron work in heavy size such as trusses builtup gates record rack etc.brought to required from including drilling holes rivetting or welding where necessary including wastage etc.all complete.(S.I.NO-503) |
| 42 | Steel work in built up tubular (round,squareor rectangular hollow tubes etc)heavy size such as trusses, builtup gates record rack etc.brought to required from including drilling holes rivetting or welding where neccesary including wastage etc all complete. |
| 43 | providing and fixing of 16 mm dia 600mm long bolt with nuts and washer all complete. |
| 44 | bolt with nut for top of vertical post |
| 45 | providing and fixing precoated galvanished iron profile sheets (size,shapeand pitch of corrugation as approved by Engineer -in-charge)0.50 mm(+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer in charge.the sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with EPDM seal,complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(D.S.R N0-12.50) |
| 46 | Add cost of one coat of steel primer & 2 coat of synthetic enamel paint. |
| 47 | All pipe outer dia meter medium quality pipe,weight taken by steel table (d.s.r no-10.25) |
| 48 | Cost of Electrification work. |
| 49 | Less 5% for Department work |
| 50 | GST @ 18% and Electric Connection Charge Rs. 10508/- Extra Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender