Tender For Construction Of Rajiv Gandhi Multipurpose Sport Stadium At Katasni, Tehsil & Distt. Shimla, H.P. (Sh: Construction of Civil Work W.S. & S.I. Rain Harvesting Tank, Water Storage Tank & Approach Road) Finishing Work (Balance Work Of Basement
Tender Value
8.05 Crore
Estimated cost
Bid Submission
13 Nov 2026
12 days left
EMD
16.11 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Rajiv Gandhi Multipurpose Sport Stadium At Katasni, Tehsil & Distt. Shimla, H.P. (Sh: Construction of Civil Work W.S. & S.I. Rain Harvesting Tank, Water Storage Tank & Approach Road) Finishing Work (Balance Work Of Basement I, Ii & Iii).
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 5 metres lead as per direction of Engineer-in-charge (a) In Cement mortar |
| 2 | Earth work in Hill Road. (I) Excavation in soil in Hilly Area by manual means including cutting and trimming of side slopes and disposing of excavated earth within all leads and lifts as per drawing and Technical Specification Clause 1603.1 including carriage of materials upto all leads and lifts as per the direction of Engineer in Charge. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. including carriage of material in all leads and lifts as per direction of the Engineer in Charge. All kinds of soil |
| 4 | Providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 gradedstone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinthas required complete including carriage of all labour equipments and materials charges. |
| 5 | Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinthas required complete including carriage of all labour equipments and materials charges. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concretecomplete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform complete upto all floor level including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts Circular complete upto all floor level including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral stair cases complete upto all floor level including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers complete upto all floor level including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 11 | Providing formwork with steel plates for vertical surfaces such as walls, partitions including attached pilasters, buttresses, plinth and string courses upto all floor level including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide complete upto all floor level including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: i) 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)/M25 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs landings, balconies, shelves, chajjas, lintels, bands, plain window sills, above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)/M25 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.i/c rendering, crack/void filling. |
| 15 | Reinforced cement concrete work in columns, pillars,posts and struts etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 16 | Reinforced cement concrete work in Stair cases ( except spiral stair case ) excluding landings but including preparing of the surface & finishing of nosing upto all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of matterial within all leads, lifts and other incidential charges as per the direcction of Engineer in Charge. in : (a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level within all leads & lifts and other incidential charges as per the direction of Engineer in Charge. A) cement mortar 1:4 (1 cement : 4 coarse sand) |
| 19 | Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete including carriage of material in all leads and lifts as per the direcction of Engineer in Charge. |
| 20 | Providing and fixing 6 mm thick High Pressure Laminates (HPL)Sheet cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 50x40 mm aluminium hollow section 80 cm c/c fixed with gun driven revits i/c scaffolding etc. complete as per Arch. Drg. and specifications and directions of Engineer-in- charge. |
| 21 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 22 | Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat: clean and saturate surface and then applying a coat of Dr. Fixit-FASTFLEX by maintaining a coverage of 6–7 sft per kg to achieve one mm thickness and the same process shall be repeated up to 300 mm vertically. The second coat shall be applied in opposite direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1:4 (1 cement : 4 sand) admixed with 200 ml of pidiproof LW @ 200 ml per 50 kg bag of cement over the floor with the suitable gradient towards drain pipe, while the second coat of Dr. Fixit is still tacky complete upto all floor levels including carriage of materials in all leads and lifts. |
| 23 | Providing and fixing 35 mm to 40 mm thick ISI marked prelaminated flush door shutters conforming to IS : 222 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. including carriage of material upto all leads and lifts as per the direction of Engineer in charge. 35mm to 40 mm thick including ISI marked StainlessSteel butt hinges with necessary screws |
| 24 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. 40 mm thick with 2nd class deodar wood |
| 25 | Providing and fixing 4 mm thick wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia .63 mm, for doors, windows and clerestorywindows with hinges and necessary screws including carriage of material upto all leads and lifts as per the direction of Engineer in Charge : With 2nd class deodar wood |
| 26 | P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 27 | 12 mm thick Pre-laminated particle board with decorative lamination on both sides, GradeI, Type II, IS:12823 marked |
| 28 | Float glass panes 6 mm thick glass pane (weight not less than15.00 Kg/Sqm ) |
| 29 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. 1st class rai wood |
| 30 | Providing and fixing 25 mm thick first class Pine wood plank Ceiling, including with necessary screws and priming coat on unexposed surface including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 31 | Providing and fixing 25 mm thick first class Pine wood plank lining/panneling including with necessary screws and priming coat on unexposed surface including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 32 | Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 33 | Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 34 | Providing and fixing 6 mm thick ply wood lining with butt jointing and nails. Framework and cover fillet to be measured and paid for separately including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 35 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 246 Type S, including cost of adhesive of approved quality, inlcuding carriage of material upto all leads and lifts as per the direction of Engineer in Charge. 1.0 mm thick |
| 36 | Providing and fixing square edges 1st class deodar wood lipping / cover fillets beading 19mmx6mm section including mitring junction with wood screws and nails complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 37 | Providing and fixing stainless steel Railing of Kitch ( Grade 316) made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 38 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 5 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge including carriage of material upto all leads and lifts. (Glazing, paneling and dash fasteners to be paid for separately). : for frames of door and window |
| 39 | Providing and fixing Powder coated aluminium work for shutter of doors, windows,ventilators and artitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM ubber/ neoprene gasket etc.in Shutters of doors and windows and partition including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. for Shutter of door and windowi/c hinges and making provision for fixing fitting. |
| 40 | Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge including carriage of material upto all leads and lifts. (Cost of aluminium snap beading shall be paid in basic items) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 41 | Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic items) With DGU 21 mm thick (5+10+6mm) thick 10 mm clear gap reflected toughned glass , including providing EPDM gasket,perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. including carriage of material upto all leads and lifts as per specifications, drawings and direction of Engineer-incharge complete. |
| 42 | Providing and fixing 0.63 mm thick P.G.I. sheet lining (inside of toilet door and duct doors) with approved adhesive and necessary screws etc., complete, including carriage of materials in all leads and lifts as per the direction of Engineer in Charge. |
| 43 | Providing & fixing fly proof wire gauze to windows,clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. |
| 44 | Providing and fixing 4 mm thick ACP tiles 60x60 cm over readymade powder coated metal sheet saction frame work 60 cm c/c. grid suspended from truss.complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 45 | Providing and fixing powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge including carriage of material upto all leads & lifts. (Only weight of grill to be measured for payment). |
| 46 | Providing and fixing 20 mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 47 | Providing and fixing Powder coated aluminium sliding door bolts with bolts and nuts etc. complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 48 | 300 X 16 mm |
| 49 | 250 X 16 mm |
| 50 | Providing and fixing Powder coated aluminium tower bolts (Berrel type) transparent or dyed to required shade and colour with screws etc. complete. |
| 51 | 250 X 10 mm |
| 52 | 200 X 10 mm |
| 53 | 150 X 10 mm |
| 54 | Providing and fixing Anodised aluminium handles transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials in all leads and lifts :- |
| 55 | 125 mm :- |
| 56 | 100 mm :- |
| 57 | Providing & fixing Powder coated aluminium hanging floor door stopper ISI marked with transparent or dyed to required shade and colour with screws etc. completeto suit shutter thickness complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. Twin Rubber stopper |
| 58 | Providing and fixing brass die cast universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 59 | Providing and fixing 65x35mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 60 | Providing and fixing 50 mm CP brass cup board or ward robe knob with nuts complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 61 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete including carriage of material upto all leads and lifts as per the direction of Enigneer in Charge. Double strip (horizontal type) |
| 62 | Providing & fixing 115 mm bright finished brass hasps and stapples (safety type)with necessary screws including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 63 | Providing & fixing Powder coated aluminium Hooks and Eyes with necessary screws including carriage of materials in all leads and lifts including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 64 | Providing & fixing 150 mm Stainless steel single acting spring hinges bright finished with necessary screws etc. including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 65 | Providing & fixing 150 mm M.S. double acting spring hinges bright finished with necessary screws etc. complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 66 | Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 67 | Providing 40 × 5 mm flat iron holdfast, 40 cm long, including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block size 30 × 10 × 15 cm, 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 68 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate including carriage of material within all leads and lifts as per direction of Engineer-in-charge |
| 69 | Providing and laying full body vitrified floor tiles of size 60x120 cm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 70 | Providing and fixing full body vitrified floor tiles of size 60x120 cm conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 71 | Providing and laying full body vitrified stepping tile of required size (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 72 | Providing and fixing 6.0 mm thick specialised high performance indoor synthetic vinyl flooring of approved coloured of LG or its equivalent fixed with polyurethane conductive adhesive plain or coloured , carbed or mosaic/ metalled finish on sub-floor (damp proofing treatement to be paid for seperately) complete as per architect Drg. including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 73 | Providing and laying Glazed vitrified Floor tile of size 60x120 cm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 74 | Providing and fixing 2.0mm thick PVC antibectarial vinyl flooring of approved coloured of LG or its equivalent fixed with polyurethane conductive adhesive plain or coloured , carbed or mosaic/ metalled finish on sub-floor (damp proofing treatement to be paid for seperately) complete as per architect Drg. including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 75 | Providing and laying Trimix flooring of reinforced cement concrete pavement of grade 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) including the cost of centering and shuttering and Reinforcement with 8mm dia bar @ 300mm C/C both way single mesh bottom placing. The concrete shall be laid and finished with niddle vibrator then after screed board vibrator, vacuum dewatering process and finally finished by sprinkeling of hardening compound Nitoflor of FOS guard on surface evenly @ 5kg per sqm and finishing the surface by floating, brooming with wire brush etc. The width of pavement shall be maximum 4000 mm and groove of appropriate size 10 mmX20 mm shall be cut with machine on appropriate spacing as directed by Engineer-in-charge and filling this groove with approved grout/ sealent with beckar rod including making good the same. including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 76 | Providing and fixing glazed Vitrified wall tiles 60x60 cm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 77 | P/F Black/ Chima pink granite work gang saw cut (polished and machine cut) of thickness 20 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade and i/c P/F SS cramps of required sizes and shape for anchoring stone wall lining e (To be secured to the backing by means of cramps, which shall be paid for separately) including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 78 | P/F First quality White/coloured glazed tile 30X45 cm conforming to IS: 15622 of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 79 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS :15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 80 | P/L mirror polished Kota stone slab of size 55x55 CM of uniform colour in flooring and treads of steps over 2 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : complete as per architectural drawing and direction of Engineer-in-charge. 25 mm thick |
| 81 | Providing and fixing White marble stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 82 | Extra for making pre finished nosing in treads of steps of Kota stone / Marble Stone 20 mm thick/Vitrified stepping Tile i/c polishing complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 83 | Providing and fixing Mandana red stone 40 mm thick the stone in flooring/ Skirting over 20mm thick base of cement mortar 1:5 with jointsn 3 mm thick admixed with pigment to match the shade of stone and pointing with same mortar including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 84 | Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge:. |
| 85 | Providing and fixing ridges or hips 60 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:. |
| 86 | Providing fixing 30 cm wide 120 cm overall box type gutter with 0.45 mm thick plain prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating with iron brackets 40 X 3 mm size bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 87 | Providing and fixing Flashing 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. :-Gutter (600 mm over all girth) Flashings/ Aprons.( Upto 600 mm) |
| 88 | Providing and fixing on wall face PVC 150 mm dia rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive complete including carriage of material upto all leads & lifts as per the direction of Engineer in Charge. |
| 89 | Providing and fixing on wall face PVC accessories for rain water pipes including filling the joints with approved adhesive including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 90 | 150 mm dia PVC door bend |
| 91 | 150 mm dia Plain Shoe |
| 92 | Providing and fixing M.S. holder bat clamps 150mm dia of approved design to PVC. Pipes embedded in and including cement concrete blocks 10x10x10cms of 1:2:4 mix (1 cement : 2 sand :4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc. including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 93 | Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 94 | Structural steel work including hollow section riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. In truss and trused purlins in buildings.and In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like |
| 95 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. In gratings, frames, guard bar, ladder, railings, brackets,ornamental brackets decorative MS screen gates and similar works |
| 96 | Providing and fixing MS hollow rectangular hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 97 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 98 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 99 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 100 | 6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts in all floor levels including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. 1:3 (1 cement : 3 fine sand) |
| 101 | 15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 3cm in girth and finished even and sand opapered smooth including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. 1:6 (1 cement: 6 coarse sand) Rough Side |
| 102 | 15 mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 3cm in girth and finished even and sand opapered smooth including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. 1:6 (1 cement: 6 fine sand) Fair Side |
| 103 | 15mm thick plain cement mortar band in cement mortar 1:4(1 cement:4 sand) above 300mm width including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. (c) Raised band. |
| 104 | Distempering two or more coats on undecorated ceiling/sloping surfaces with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 105 | Wall painting with premium acrylic emulsion paint of approved brand and manufacture to give an even shade including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 106 | Finishing walls with Acrylic Smooth exterior paint of required shade ,brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 107 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 108 | Providing and fixing double-glazed glass glazing comprising 6 mm thick glass on both sides with a specified cavity in between to be filled with transparent membrane of specific design to make it safety glass , including the necessary glazing frame, gaskets, sealant, spacers, and accessories, complete as per the approved drawings and Techenical specifications including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 109 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ?85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 110 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 111 | 15 mm dia nominal bore |
| 112 | 20 mm nominal bore :- |
| 113 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 114 | 15 mm dia nominal bore |
| 115 | 20 mm nominal bore |
| 116 | 65 mm nominal bore |
| 117 | 80 mm nominal bore |
| 118 | Connecting Pipe |
| 119 | Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge : 25 to 40 mm nominal bore |
| 120 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of material in all leads and lifts as per direction of the Engineer in Charge. 20mm nominal bore |
| 121 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 1271 marked, with cover and suitable locking arrangement of various capicityand making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. Net capacity |
| 122 | Constructing masonry Chamber 300 x 300 x 500 mm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 1x1 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 2 mm nominal size), i/c necessary excavation, foundation concrete 1:5:1 ( 1 cement : 5 fine sand : 1 graded stone aggregate 4mm nominal size ) and inside plastering with cement mortar 1:3 (1cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 123 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 8°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1. metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge, including carriage of materials within all leads and lifts as per the direction of Engineer in Charge |
| 124 | 1216 mm (16 mm O.D. pipe) INTERNAL WORK - EXPOSED ON WALL |
| 125 | 1620 mm ( 20 mm OD pipe). |
| 126 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 8°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1. metre spacing. This includes the costs of cutting chases and ncluding testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. |
| 127 | 1216 mm (16 mm O.D. pipe) |
| 128 | 1620 mm ( 20 mm OD pipe). |
| 129 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 8°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge.including carriage of materials within all leads and lifts. External work |
| 130 | 1216 mm (16 mm O.D. pipe) |
| 131 | 1620 mm ( 20 mm OD pipe). |
| 132 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc.including carriage of materials within all leads and lifts. |
| 133 | 150 mm dia |
| 134 | 110 mm dia |
| 135 | Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 136 | 150 mm dia |
| 137 | 110 mm dia |
| 138 | Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- |
| 139 | 150 mm dia |
| 140 | 110 mm dia |
| 141 | Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 142 | 150 mm dia |
| 143 | 110 mm dia |
| 144 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 145 | 150 mm dia |
| 146 | 110 mm dia |
| 147 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 148 | 150 mm dia |
| 149 | 110 mm dia |
| 150 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.including carriage of materials within all leads and lifts :- |
| 151 | 150 mm dia |
| 152 | 110 mm dia |
| 153 | Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.including carriage of materials within all leads and lifts :- |
| 154 | 110 mm x 90 mm |
| 155 | 90mmx75mm |
| 156 | Providing and fixing PVC cowl including carriage of materials within all leads and lifts :- |
| 157 | 150 mm dia. |
| 158 | 110 mm dia. |
| 159 | Providing and fixing PVC double equal branch with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete |
| 160 | 150 mm dia |
| 161 | 110 mm dia |
| 162 | Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete. |
| 163 | 150 mm dia |
| 164 | 110 mm dia |
| 165 | Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- |
| 166 | 150 mm x 110 mm dia |
| 167 | 110 mm x 90 mm dia |
| 168 | Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.including carriage of materials within all leads and lifts :- 110mm |
| 169 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 |
| 170 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. 100 mm Sand cast iron S&S as per IS - 1729 |
| 171 | Cutting Chase in stone / brick masonary walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4coarse sand) : 100 mm dia. |
| 172 | Providing and fixing white vitreous china water Big size closet squatting pan (Indian type) (Earthwork, bed concrete and traps to be measured and paid for seperately including carriage of material within all leads and lifts as per the direction of Engineer in Charge |
| 173 | Providing and fixing white vitreous china (European type/ wash down type) water closet pan with integral \\"P\\" or \\"S\\" trap with dual flushing system all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc. including carriage of material within all leads and lifts as per the direction of Engineer in Charge. |
| 174 | Providing and fixing viterous China wash down European seat with integral P/S including carriage of material within all leads and lifts as per the direction of Engineer in Charge. for handicaped Toilet |
| 175 | Providing and fixing , white vitreous china single Unit WC syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 176 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials within all leads and lifts :- |
| 177 | Providing and fixing viterous China wash basin with pedestal with single hole Basin mixer with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts :- |
| 178 | Providing and fixing viterous China wash basin with pedesta with single hole Basin mixer with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts :-(For handicaped ) |
| 179 | Providing and fixing white vitreous China half stall urinal with white PVC automatic flushing cistern, with fitting, standard size C.P Brass flush pipe, spreaders including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. Flat back Small urinal with 5 litres P.V.C automatic flushing cistern |
| 180 | Providing and fixing white vitreous china divisional plate for urinal including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 181 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 182 | Providing and fixing C.P Bottle trap (heavy duty ISI marked I.S No 8931 & 8934) for wash basin and sink including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 183 | Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 184 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. 32 mm dia Flexible pipe |
| 185 | Providing and fixing 100 mm CP grating for Nahani / gully / Floor trap including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 186 | Providing and fixing 600mmx450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 187 | Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. :-(600x20mm) |
| 188 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 189 | Providing and fixing soap dish recessed type stainless steel of Hotelier series fixed to wooden cleats with s.s screws including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. |
| 190 | Providing and fixing liqued soap container fixed to wooden cleats with s.s screws including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. |
| 191 | Providing and fixing toilet paper holder with flap recessed type of hotelier series of jaquar fixed with stainless steel screws etc complete including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. |
| 192 | Providing and fixing 100 mm dia C.P Brass shower rose with 15-20 mm inlet including carriage of materials within all leads and lifts. |
| 193 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 with flenge including carriage of materials within all leads and lifts. : 15mm dia :- |
| 194 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. 15mm dia |
| 195 | Providing and fixing uplasticised PVC connection pipe (heavy duty ISI marked IS:8931& 8934) with brass unions including carriage of materials with all leads and lifts : 45cms length, 15mm nominal bore |
| 196 | Providing and fixing C.P. brass stop cock (concealed) of standard esign and of approved make conforming to IS:8931 including carriage of materials with all leads and lifts. |
| 197 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms including carriage of materials with all leads and lifts. |
| 198 | Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 80 mm long, weighing not less than 46 gms including carriage of materials with all leads and lifts. |
| 199 | Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. |
| 200 | 15mm nominal bore :- |
| 201 | 20mm nominal bore :- |
| 202 | Providing and fixing Brass ball way valve( horizontal plunger type) high pressure with polythene plastic floats: including carriage of materials within all leads and lifts :- 15mm nominal bore. |
| 203 | Providing and laying 150 mm dia in trenches (to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches |
| 204 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round S.W./ PVC pipes (150 MM DIA) including bed concrete as per standard design :including carriage of materials within all leads and lifts as per the direction of Enigneer in Charge. |
| 205 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 2 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 4 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 2 mm nominal size) finished with a floating coat of neat cement complete as per standard design :including carriage of materials within all leads and lifts :- Inside size 9x8 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x61 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): |
| 206 | Inside size 12x9 cm and 9 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x61 mm internal dimensions including carriage of material upto all leads and lifts as per the direction of Engineer in charge. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 207 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of materials within all leads and lifts :- LD- 2.5 Rectangular shape 610x455 mm internal dimensions. |
| 208 | Supplying and Fixing 300x300 mm Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 209 | Providing and installing Mono Block Electric pump 2 HP single phase of Kirloskar make or equivalent including fixing complete.including carriage of materials within all leads and lifts :- |
| 210 | Cutting holes up to 30x30 cm in walls including making good the same including fixing complete.including carriage of materials within all leads and lifts : With common burnt clay F.P.S. (non modular) bricks |
| 211 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. |
| 212 | Providing, laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 (1 cement : 1 sand) 150 mm internal diameter salt glazed stoneware grade 'A' half round channels including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. |
| 213 | Providing and fixing grab bars in handicaped toilet of CP 40 mm dia steel pipes 78 cm heigh welded with MS plate as per detail and position of WC seat.and embedded in cement concrete complete including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. |
| 214 | Providing and fixing precast reinforced cement concrete chamber cover with frame complete for man hole of internal dimension 300 mm x 300 mm i/c carriage of materials within all leads, lifts and other incidentals. |
| 215 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 610x455 mm internal dimensions R.C.C. manhole cover with frame including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. |
| 216 | Supplying and filling brocken/crushed stone aggregate chipping of hard stone of 40 mm size including carriage of material up to all leads and lifts as per the direction of Engineer in Charge. |
| 217 | Providing and laying weep holes or retaining walls/ breast walls 100mm dia PVC(D-Plast) pipes of working pressure not less than 4.5 Kg per sqm. extending through the full width of the structure with slopof 1 (V) : 20 (H) towards drawing face complete as per drawing and technical specifications clause 614, 709, 1204.3.7.including hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 218 | Providing and laying heavy duty cement concrete inter locking paver blocks vibro compacting upto M-50 grade i/c border or kurb grey or coloured subbase of concrete with 25mm thick average thickness of cement mortar 1:4 laid over and jointed with cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing and polishing complete subbase concrete floor to be paid for 80 mm thick inter locking blocks including carriage of materials within all leads and lifts as per the direction of Engineer in Charge. |
| 219 | Backfilling behind abutment , wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8. including carriage of material upto all leads and lifts as per the direction of Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender