Tender For Repairs/ Replacement To Flame Proof Wiring And Associated Works Of Bps Hangers Area And Stores At Air Force Staion Jaisalmer
Tender Value
20 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
6 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/ Replacement To Flame Proof Wiring And Associated Works Of Bps Hangers Area And Stores At Air Force Staion Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully aluminium point wiring on wooden battens/through conduit (light fan, socket or power) complete with fittings such as switches, wooden batten, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engineer-in-Charge |
| 2 | M&L for flame proof point wiring with two single core FRLS-H PVC insulated & PVC unsheathed multi stranded copper conductor cable of size 1.5 Sqmm 1100 volts grade in and including ERW steel conduit of size 20 mm or Higher dia with all accessories and one single core PVC insulated & PVC sheathed multistranded FRLS-H copper cable of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly, switch board complete incuding cutting chesses on wall/ floour/ ceiling etc. & making good the disturbed surface with 1:4 cement morter all as specified for one light / fan point controlled by one 5 Amps flameprrof switch one way complete. |
| 3 | All as per Sr item No. 2.00 herein before but with 4 sqmm for phase &neutral and 4 sqmm for earth wire for socket out let 15 Amps on independent board. |
| 4 | Supply and fixing in repair LED Light Fitting 1x20 Watt flame proof ,CMRI certified recommended for gas/vapour group of IIA &II B ,zone 1 and 2 and IP 65 Protection with die cast alluminium housing with heat resistant toughned glass with LED tube light, fixtures, driver holders ,connectors etc complete with all accesories prewired and including connecting with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply and Fixing in repair Flameproof cum Waterproof Round type LED Flood light fitting of 80W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size. complete all as specified and directed |
| 6 | M&L in repair switch flame proof rotory type with termination box in LM 6, 16 A, single phase 250 volts complete all as specified and directed by Engr-in-Charge.. |
| 7 | M&L in repair switch flame proof switch socket & plug combained in LM 6 cable termination box in LM6, 16 A, 250 V, 2P+ earth complete all as specified and directed by Engr-in-Charge. |
| 8 | S & F in repair Flame proof weather proof DB(Distribution Board) SPN 4 Way having Incoming MCB of 16A/25A 2Pole and outgoing total 02 MCBs CBs as -01 Nos.6 Amps Single Pole MCB, and 01 nos 10Amp MCB Sp all including interconnections and Bus Bar of Suitable Size with sufficient Entries for Mounting cable Gland for incomer and outgoing cables. |
| 9 | S & F in repair Flame proof weather proof DB(Distribution Board) SPN 6 Way having Incoming MCB of 32A 2Pole and outgoing total 04 MCBs CBs as -6 to 32 Amps Single Pole MCB Sp all including interconnections and Bus Bar of Suitable Size with sufficient Entries for Mounting cable Gland for incomer and outgoing cables. |
| 10 | S & F in repair Flame proof weather proof DB(Distribution Board) SPN 8 Way having Incoming MCB of 32A 2Pole and outgoing total 06 MCBs CBs as -2 Nos.6 Amps Single Pole MCB, 2 Nos 10A Amps MCB Sp and 02 nos 16Amp MCB Sp all including interconnections and Bus Bar of Suitable Size with sufficient Entries for Mounting cable Gland for incomer and outgoing cables. |
| 11 | S & F in repair Flame proof weather proof DB(Distribution Board) SPN 10 Way having Incoming MCB of 63A 2Pole and outgoing total 08 MCBs CBs.6 to 32Amps Single Pole MCB all including interconnections and Bus Bar of Suitable Size with sufficient Entries for Mounting cable Gland for incomer and outgoing cables. |
| 12 | S & F in repair Flame proof weather proof DB(Distribution Board) SPN 12 Way having Incoming MCB of 63A 2Pole and outgoing total 10 MCBs CBs.6 to 32Amps Single Pole MCB all including interconnections and Bus Bar of Suitable Size with sufficient Entries for Mounting cable Gland for incomer and outgoing cables. |
| 13 | M&L for concealed conduit point wiring controlled by one switch with PVC insulated but sheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 25 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly including cast iron/pressed steel terminal/wooden boxes(as per site requirment) Covered with laminated sheet top cover switches/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for the following: |
| 14 | All as per Sr item No. 13.00 herein before but One light point /fan point/exhaust fan controlled by one way switch |
| 15 | All as per Sr item No. 13.00 herein before but One bell point controlled by one bell push |
| 16 | All as per Sr item No. 13.00 herein before but One socket outlet 5 Amps on independent board |
| 17 | All as per Sr item No. 13.00 herein before but One socket outlet 5 Amps on the same board |
| 18 | All as per Sr item No. 13.00 herein before but with 4 Sqmm for phase & neutral and 4 sqmm for earth wire for socket out let 15 Amps on independent board. |
| 19 | S&F switch piano flush type single pole one way 5 Amp (ISI Marked) |
| 20 | S&F switch piano flush type single pole one way 15 Amp (ISI Marked) complete all as specified and directed. |
| 21 | S&F Bell push flush type single pole one way 5 Amp (ISI Marked) complete all as specified and directed. |
| 22 | S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) complete all as specified and directed. |
| 23 | S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) complete all as specified and directed. |
| 24 | Supply and fix Electronic fan regulator 230 volts, step type, socket type, hum free 120 watt ISI Marked including taking down unserviceable complete all as specified and directed. |
| 25 | Taking down old unserviceable Distribution board any type complete all as specified and directed. |
| 26 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 amp rated copper bus bar 240 Volts 4 way single pole and neutral complete all as directed by Engineer-in-Charge. |
| 27 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral complete all as directed by Engineer-in-Charge. |
| 29 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 415 Volts 4 way Triple pole and neutral complete all as directed by Engineer-in-Charge. |
| 30 | S&F for Surface mounting and Flush Mounting Sheet Metal/steel enclosure,dust and vermin proof VTPN Distribution Board, 4 Ways, Double Door(IP-43), built- in bus bars complete suitable for 415 Volts, AC, 50 Hz supply, suitable for incoming MCCB and outgoing MCBs and fixed in recess in brick masonary wall complete all as specified and directed by the Engineer-in-Charge. |
| 31 | Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- |
| 32 | All as per Sr item No. 31.00 herein before but S & F MCB, 6 to 32 Amp, SP, 240 Volt, 10 KA, complete all as specified and directed. |
| 33 | All as per Sr item No. 31.00 herein before but S&F MCB, 32 Amp, SPN, 240 Volt 10 KA, 'C' curve complete all as specified and directed. |
| 34 | All as per Sr item No. 31.00 herein before but S&F MCB 63 Amp, TP 415 volts 10 KA, complete all as specified and directed. |
| 35 | All as per Sr item No. 31.00 herein before but S&F MCB 40-100 Amp, TPN 415 volts 10 KA, complete all as specified and directed. |
| 36 | Supply and fixing in repair Surface and wall mounted LED tube light fittings of cap 10W , Two feet Basic all purpose surface and wall mounted LED batten with extruded PVC housing & integrated electronic driver all as specified and directed. |
| 37 | Supply and fixing in repair TITANIA LED tube rod 1x20 Watt (single side connection) (4 ft). Make - Havells Cat No-TITANIANEO1213T8SSTL20WLED865SPC or techno commercially equivalent as approved by GE. |
| 38 | Supply and fixing in repair Industrial REGAL batten for LED tube rod 1x22 Watt (single side connection) (4 ft) . Make - Havells Cat No-REGALBATTENT8UPTO1X22WSSBSWH or techno commercially equivalent as approved by GE. |
| 39 | Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 6.00 Sq mm 1100 volts grade including one 6.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping/conduit incl Note : Two run of 6.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor shall be measured & paid as one unit. |
| 40 | Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 4.00 Sq mm 1100 volts grade including one 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping / conduit incl. Note : Two run of 4.00 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit. |
| 41 | Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 10.00Sq mm 1100 volts grade including one 10.00Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing incl. Note : Two run of 10.00 Sqmm cable and one run of 10.00 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit. |
| 42 | Supply and fixing LED Street Light of Capacity 30 Watt With inbuilt Driver having Pressure die cast Aluminium housing, IP-66 Having Efficiency of ≥ 100 Lumens/Watt, Operating voltage – 120 – 270 Volts, P.F ≥ 0.95, T.H.D < 10 % , Suitable for 30 to 40 mm O.D Mountingn Pipe andSuitable for mounting of Wall / Pole With necessary Mounting arrangements) including connecting up with three core twisted flexible copper conductor cable with suitable size, mounting Pipe/Bracket, Nut, Bolts and Accessories including disconnected & taking down oldunserviceable light complete all as specified and directed. |
| 43 | S&F in repair LED Panel 36 watt with 2ft x 2 ft slim panel with super bright surface mounting LED Slim ceiling light with white powder coated extruded aluminium housing and highly efficient light smoothing optics to deliver superior illumination including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23/0.0076 including taking down old unserviceable fittings complete all as specified and directed. |
| 44 | Supply and Fixing 15 /18Watt Yellow LED Downlighter 6000K Recess Mounting made out of Thermally conductive engineering plastic finished in white color having inbuilt driver , high translucent frosted optically diffuser, glare free light, Square / Round Shape and yellow Color (As per siteRequirement) having lumen output of 1800 Lumens including connecting up with twin core twisted flexible copper conductor cable with suitable size including disconnected & taking down old unserviceable light complete all as specified and directed. |
| 45 | Attending complaints of light or power circuit due to burning/disconnecting of any wire i.e neutral phase or tripping of MCB or unserviceability of any item such as switch socket MCB etc, rectification of fault including any petty repair required to restore the electric supply for checking of existing electrical items for contineous electric supply including carrying out minor repairs such as changing of fuse, small pieces of wires etc. carrying out repairs such as tightening of loosen electric connections, nuts, bolts screws or switches, sockets, switch board, etc. required to make the item functional during day hours complaint Attender including necessary T&P and dismantling / Taking down complete all as specified and directed.Note :- (a) Replacement of electrical fitting/fixtures shall be measured and paid for separately under respective items as supply only and fixing cost included in this item.(b) Repairs/faults in any one quarter/ one occupancy shall be considered as one complaint (one measuring unit) even if repair is involved in more than one light point or fitting, however supply & fixing of fitting/ fixtures replaced shall be measured & paid separetely as supply only and fixing cost included in this item.(c) Number of complaint may varry day to day contractor shall quote their rates accordingly.(d) In case of failure on the part of contractor for attending complaint as penalty shall be imposed and recovered in Rs. 200/- Each complaint as specified.(e) Contractor shall ensure that complaint Attender with carry functional and live mobile phone connection while on duty and will be on contact with JE incharge/ Engineer-in-Charge.(f) Contractor shall be responsible for collection of all complaints from JE E/M and to date the states after attending /complete of the Job. |
| 46 | Supply only in replacement switch 5 Amp piano type complete all as specified and directed. |
| 47 | Supply only in replacement socket 5 Amp 5 pin type complete all as specified and directed. |
| 48 | Supply only in replacement switch 15 Amp piano type complete all as specified and directed. |
| 49 | Supply only in replacement socket 15 Amp 5 pin complete all as specified and directed. |
| 50 | Supply only in replacement MCB SP 6-32 Amp complete all as specified and directed. |
| 51 | Supply only in replacement MCB SPN 40-63Amp complete all as specified and directed. |
| 52 | Supply only in replacement MCB TP 63 Amp complete all as specified and directed. |
| 53 | Supply only in replacement Fan regulator elecronic step type 100 Watt switch type complete all as specified and directed. |
| 54 | Supply only in replacement Modular switch 6 Amp 250 V AC one way one module complete all as specified and directed. |
| 55 | Supply only in replacement Modular switch 20 Amp 250 V AC one way with indicator one module complete all as specified and directed. |
| 56 | Supply only in replacement Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 57 | Supply only in replacement Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 58 | Supply only in replacement Modular Fan regulator step type, 120W - 2 module complete all as specified and directed. |
| 59 | Supply only in replacement PVC rectangular block for mounting switches/socket with 3 mm mm plastic sheet cover of Size 200X 150X 50 mm complete all as directed |
| 60 | Supply only in replacement PVC rectangular block for mounting switches/socket with 3 mm mm plastic sheet cover of Size 100X 100 x 50 mm complete all as directed. |
| 61 | Supply only in replacement PVC rectangular block for mounting switches/socket with 3 mm mm plastic sheet cover of Size 175X 100 x50 mm complete all as directed. |
| 62 | Supply only in replacement ceiling rose complete all as specified and directed. |
| 63 | Supply only in replacement 05 amp bell push switch piano type complete all as specified and directed. |
| 64 | Supply and fix in repair pvc casing capping 25mm complete all as specified and directed. |
| 65 | Supply and fix in repair pvc conduit dia 25mm complete all as specified and directed. |
| 66 | Supply and fixing in repair Surface and wall mounted LED tube light fittings of cap 22W, Four feet Basic all purpose surface and wall mounted LED batten complete all as specified and directed. Please Enable Macros to View BoQ information |
| 67 | Supply and fixing in repair Surface and wall mounted LED tube light fittings of cap 22W, Four feet Basic all purpose surface and wall mounted LED batten complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender