Tender For Camouflage And External Painting To Bldg In Zone B In Domestic Area At Air Force Station Jaisalmer
Tender Value
28 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
8 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Camouflage And External Painting To Bldg In Zone B In Domestic Area At Air Force Station Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description, on brick or stone walls or ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 2 | M&L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick or concrete surfaces or stone masonry surfaces of wall, finished even and smooth w/o using extra cement complete. |
| 3 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces of wall, finished even and smooth w/o using extra cement complete. |
| 4 | M&L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and fair without using extra cement complete all as specified and directed by Engr-in-charge. |
| 5 | M&L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by Engr-in-charge. |
| 6 | M&L for prepariation of new plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of walls. |
| 7 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as spd and dir. |
| 8 | Demolition of cement concrete (reinforced) in roofs, platforms, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 9 | M&L for reinforced cement concrete type B-1, 1:2:4 (using 12.5mm graded stone aggregate) in Chajjas, column, beam, facia, staircase etc Complete all as specified and directed. |
| 10 | M&L for providing Micro concrete with MICROCRETE in Chajjas,column,beam, facia, staircase etc at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine etc all as specified and directed. Make: CICO MICROCRETE of CICO Technologies ltd or equivalent in Fosroc/STP as approved by GE. |
| 11 | M&L for Formwok to Chajjas ,column,beam, facia, staircase, Chullah hoods, water troughs and similar items incl edges for rough finished flat concrete surface incl necessary struts, scaffolding etc complete all as spd and dir by Engr-in-charge. |
| 12 | M&L Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 13 | M&L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by Engr-in-charge. |
| 14 | M&L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying two coats of cement base paint (tinted) on wall colour as approved by Engr-in-charge. |
| 15 | M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping down smoke soot, moulds , moss and efflorescent salts and greasy spot etc, and applying one coat of white wash on walls including all cornices etc. |
| 16 | Description all as per item 15 here in-before but on ceiling |
| 17 | M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of oil bound distemper tinted on walls complete all as spd and as directed by Engr-in-charge. |
| 18 | All as per Sr Item No. 17.00 here-in before but two coats |
| 19 | All as per Sr Item No. 17.00 here-in before but on ceiling. |
| 20 | M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping , down smoke soot and greasy spot etc, and applying one coats of weather proof exterior emulsion paint on wall/Floor surfaces, colour as approved by GE |
| 21 | All as per Sr Item No. 20.00 here-in before but two coats |
| 22 | M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping , down smoke soot and greasy spot etc, and applying two coats of interior washable paint including and over one coat of 1mm thick wall care putty complete on wall surface in any colour as approved by Engr-in-charge. |
| 23 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified in any colour as approved by Engr-in-charge. |
| 24 | All as per Sr Item No. 23.00 here-in before but on steel surfaces. |
| 25 | S&F 5mm thick Alluminium composite panel of size 15cm x 15cm with letters n.exc 6 No's of suitable size for writing building number on it, plate fixed on wall with minium 02 nos of stainless steel fasterners fixed with suitable MS/plastic rowel plug complete all as spd and dir by Engr-in-charge. (Size of letters & colour of sheet/letters as per approval of Engr-in-charge) |
| 26 | S&F 5mm thick Alluminium composite panel of size 30cm x 30cm with letters n.exc 6 No's of suitable size for writing building number on it, plate fixed on wall with minium 04 nos of stainless steel fasterners fixed with suitable MS/plastic rowel plug complete all as spd and dir by Engr-in-charge. (Size of letters & colour of sheet/letters as per approval of Engr-in-charge) |
| 27 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises. |
| 28 | M&L for Chequered cement concrete tiles rubberised moulded of area 300x300x20-25mm thick fixed with gray cement and pigment, set, jointed and pointed in neat cement slurry including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 as in floors complete all as specified & directed |
| 29 | M & L for machine pressed precast concrete interlocking paver block rubberised moulded any shape and size with grey cement and pigment cnfirming to IS-15658-2006 of 80 mm thickness, M-40 grade over and including 25mm thick sand/stone dust complete all as spfd & directed by Engr-in-Charge. |
| 30 | Demolition of cement concrete unreinforced in groung floors, paving n.exc 15cm thickness (below or above ground level) and precast concrete articles as in kerb walls. |
| 31 | M&L for 75mm thick PCC type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, sub base, slab flooring complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L PCC1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching etc incl necessary form work complete all as specified and directed by Engr-in-charge. |
| 33 | M&L for Vitrified out door tiles 40 cm x 40 cm x 10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6. (Make-H & R Johnson, Brand-Endura digital designer series or equivalent) |
| 34 | M&L for Preparation of old paver block/ chequered tiles foors any pattern by brooming down or steel wire brushing for removing caked mud, trading oil and greasy spots, cleaning with water etc. and applying two coats glossy floor coat emulsion paint premium series complete all as specified and directed. (Make: Indigo/asian paint/berger or equivalent as approved by GE.) |
| 35 | M&L for 50mm thick reinforced precast louvers or jallies, Type B-0, 1:2:4 (Using 12.5mm graded stone aggregate) incl all mouldings and framework set in CM 1:4 complete. |
| 36 | S&F 2mm thick plain/diamond cut factory made Polycarbonate sheet in any colour fix at site of any shape as specified fixing to MS frame with anchor fasteners (min 04 Nos fastener or more ) as per fixing requirment and manufacturer instruction at site complete all as spd and dir by Engr-in-charge. (MS frame shall be paid separetely). |
| 37 | M&L Mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors of grade Fe-290 (Gde E165) fixed with angle cleats or other connecting plates |
| 38 | M&L for cutting holes into or through brick/stone walls built in cement mortar (n.exc 400mm thick), superficial area exc 400 Sqcm n.exc 0.10 Sqm and making good in cement mortar 1:3 or PCC 1:2:4 type B-1 as required. |
| 39 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed watertubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth for Stone concrete block or slabwalls |
| 40 | M&L preparation of new steel surfaces of any description,exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed . |
| 41 | M&L preparation of old plastered/concrete surfaces of any description,exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed . Please Enable Macros to View BoQ information |
| 42 | M&L preparation of old plastered/concrete surfaces of any description,exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender