Tender For Service For Machineries In Material Testing Laboratory - Civil Department
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Nov 2026
16 days left
EMD
200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Service For Machineries In Material Testing Laboratory - Civil Department
BOQ
| Sl. No. | Item Description |
| 1 | SERVICE FOR MACHINERIES IN MATERIAL TESTING LABORATORY – CIVIL DPARTMENT |
| 2 | TORSION TESTING MACHINE : Maximum Torque Capacity - 60 Nm Torque Ranges – 60 Nm and 30 Nm No. of Divisions on Dial – 600 No Torsion Speed – 1.5 rpm Clearance between grips – 0-420 mm Grips for Flat Specimens width – 125 mm Motor – 0.5 HP, Power supply – 400 – 440 V 3 phase, 50 Hz Accuracy of torque indication : +1 % of the true torque Make – FIE. Faults in the equipment : 1. Grips holding the specimen should be changed.2. Analog display showing the torsion reading increases.3. Suddenly with torque applied, so it must be calibrated. |
| 3 | DIRECT SHEAR TESTING MACHINE :Ref. Standards IS:2720 (Part 13), BS 1377, ASTM D 3080The Direct Shear test is carried out with an apparatus consisting of a square divided into two halves. The specimen, contained in the box, is subjected to a constant normal load while an increasing horizontal force is applied to one of the sections of the shear box. This force Causes a shear failure along the junction between the box sections. The shear force and the normal load are measured directly. The rate of strain is adjusted by the speed of the horizontal force applied. The loading unit has V-strips on which the shear box housing rests. Suitable for specimens of size 60×60×25mm. The recalibrated load yoke helps counter balance the Loading system. The load yoke with direct and through lever system for applying normal load up to 3 kg/cm, capacity, fixtures for proving ring, brackets for holding consolidation and strain dial gauges are provided. The lead screw connected to the shear box housing helps Application of shear stress. Suitable for operation on 220V, 50Hz, Single phase, AC Supply. Ref. Standards IS:11229, 2720 (Part 13)Type of Shear: Direct / Residual Measurement.Faults in the equipment : 1. Wires connecting to the motor need to be changed.2. The piece connecting the shear box and proving Ring[U-shaped piece]Need to be changed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender