Tender For Misc B/R Repairs In Mes Installation In Domestic Area At Af Stn Jaisalmer
Tender Value
23.50 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
6 days left
EMD
47000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc B/R Repairs In Mes Installation In Domestic Area At Af Stn Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing the debries to distance not exc 50 m from site all as directed. |
| 2 | M & L Reinforced cement concrete (nominal mix) 1:2:4 type B1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc all as specified. |
| 3 | M & L reinforced Cement concrete (nominal mix) 1:2:4 type B1 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, etc all as specified. |
| 4 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as binding with and including mild steel wire (Annealed) not less than 0.9mmdia or securing with clips |
| 5 | M&L for Use and waste of fair finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs,beam, cantilevers, bressummers, lintels, cooking plateform and similar work not exc. 200 mm thick. |
| 6 | M&L for Use and waste of rough finished form work to edge of concrete slabs, breaks in floors, etc exc 5 cm but not exc. 10 cm wide |
| 7 | M&L for Rough finished flat form work to Chajjas, beam, column, lintel, chullah hoods, water troughs and similar items including edges and formwork including necessary struts, scaffolding etc. |
| 8 | M&L for Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 9 | M & L for removing of rust from existing steel surfaces with rust remover applied two coats @ 0.15Ltr/Sqm per coat and cleanng all rust with steel wire brush and washed with wter/chemical complete all as spd and dir by Engr-in-Charge. (Make- SIKA/FOSROC or equivalent as approved by GE.) |
| 10 | M & L for application of Anti corressive coating with Rustoff friazinc on the exposed reinforcement proper mix applied @ 0.25 Ltr Sqm of exposed steel surface as per manufacture's instruction complete all as spd an dir by Engr-in -charge. (Make- SIKA/FOSROC or equivalent as approved by GE.) |
| 11 | S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (weight not exc 4.00 kg/Sqm) complete all as specified and directed. |
| 12 | M&L for applying one coat of epoxy resin (FAIR BOND EP) on old concrete surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer's instructions and applying 25mm thick (average thickness) of cement ,sand & Aggregate (1:1.5:3) in ratio aggregate n'less than 6mm size mixed with chloride free concrete plasticiser as per manufacturer's instruction with guniting applying manual and finished the surface even and smooth complete all as specified and directed.(Manual applied) (Make : Fairmate chemicals or equivalent as approved by GE.) |
| 13 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 14 | M & L 15 mm thick rendering (INTERNAL) in cement mortar 1:6 on stone masonry surfaces of fair faces of brick or concrete surfaces, finished even and fair complete. |
| 15 | M & L 15 mm thick rendering (external) in cement mortar 1:4 on stone masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and fair complete. |
| 16 | M & L for rendering 10 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and fair without using extra cement complete all as specified and directed. |
| 17 | M & L for prepariation of newly plastered surfaces and applying two coats of distemper oil emulsion (White or tinted) over a coat of chalk whiting on surfaces of walls complete all as specified and directed. |
| 18 | All as per item No 17 here - in - before but on ceiling. |
| 19 | M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by GE. |
| 20 | Demolition of stone/brick masonry built in cement mortar including coping etc all as specified and directed by Engr - in - charge. |
| 21 | M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:4 etc complete all as specified. |
| 22 | M&L for cutting holes into or through brick/stone walls built in cement mortar (nexc 400mm thick), superficial area exc 400 Sqcm nexc 0.10 Sqm and making good in cement mortar 1:3 or PCC 1:2:4: type B-1 as required. |
| 23 | M & L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths)as in other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, complete |
| 24 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified |
| 25 | M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified. |
| 26 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n'exc 50m and making good distrubed surface for any type of soil complete all as spd and dir. |
| 27 | M & L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation for concrete post/struts complete all as spd anddir. |
| 28 | S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire,etc;flat iron fillets(for securing wire mesh etc) including all necessary drilling ,bolting or riveting,etc, and similar works conforming to Fe-410-0 or Fe-310-0. |
| 29 | Dismantling chain link fencing wire, any type complete all as specified and directed. |
| 30 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed |
| 31 | Supply only MS Galvanized chain link fencing any size and type complete all as specified and directed. |
| 32 | S & F round tie bars 10mm dia conforming to Fe290 Gde E-165 let in and fixed independantely incl hooking ends for securing wire mesh chain link fencing as in bearing bars complete all as specified and directed. |
| 33 | S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, exc. 5 cm long & diameter of neck 5 to 10mm complete all as specified and directed . |
| 34 | S&F in repair galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as specified. (each line wire to be measured). complete all as specified and directed |
| 35 | All as per item no. 34.00 but Restraining resecuring including making good staples etc complete all as spd and dir |
| 36 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 37 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 38 | M&L PCC/RCC1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching etc incl necessary form work complete all as specified and directed |
| 39 | M&L preparation of old steel surfaces of any description,n ' exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed . |
| 40 | Excavating in trenches n exc 1.5m wide and n exc 1.5 m in depth for foundation etc and getting out soft /disintigrated rock |
| 41 | M & L for Returning , filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm compete |
| 42 | M & L for Removing excavated soil n.exc 50m depositing where directed at a level n exc. 1.5 m as directed by Engineer-in-charge |
| 43 | M&L for 1:4:8 type D2 (40mm graded aggrage) cement concrete in foundation, filling and mass concrete. |
| 44 | M&L Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells and plateform etc. |
| 45 | Demolition of cement concrete (unreinforced) above ground floors not exceeding 15 cm thickness complete all as spd and dir |
| 46 | M&L fo 60 mm thick precast interlocking coloured paver rubberised moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS-15658-2006 laid and joints over sand cushion layer complete all as specified . |
| 47 | M&L for chequered cement concrete tiles 300mm X. 300mm x 20-25mm thick, set, jointed and pointed in near cement slurry in floor with grey cement and pigment including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 48 | Dismantling of existing water proofing treatment, PCC works of any location up to existing Rcc slab by chiesling,drilling,scraping etc.complete all as specified and directed. |
| 49 | M&l for cutting out cracks to V-section in existing roofs or terracing ,cleaning out ,wetting,grouting with cement and sand slurry 1:3. |
| 50 | M&L for 10mm thick cement screed in cement mortar 1:3, including finishing even and smooth with out using extra cement to receive roof treatment, mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified. Note - Water proofing compound shall be measured and paid separately. |
| 51 | Supply only Liquid water proofing compound STP No-1 Dr. Fixit or complete all as specified and directed. |
| 52 | M&L for water proofing roof treatment, consists of a five layered Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces piror laying APP and a coat of bituminous aluminium primer @ 100 gm/Sqm on top, including sealing all joints by thermo fusion, complete all as per manufacturer's instructions. |
| 53 | M & L PCC (1:2:4) type B-O using 12.5mm graded stone aggregate as in Roof padding, roof kerbs of mud stops or similar work maintain proper slope as requred as specified . |
| 54 | M&L for applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrtlic polymers having sun reflectivity index (SRI) upto 105 on top of concrete roof in three coats @ 10.75 ltr/10sqm one coat of self primimg of elastomaric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomaric water proofing liquid 500 micron after cleaning the surfaces complete all as spd and directed. |
| 55 | M&L for complete removal of existing treatment, filling up undulation and applying two layers ready mixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete of wall |
| 56 | M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by GE. |
| 57 | M&L for preparation of old painted wooden surface or wood based materials of any description, not otherwise described, over 10 cms widths or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 58 | M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 59 | S&F repairs Vitreous china wash down water closet pan with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed. |
| 60 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe). |
| 61 | S&F Plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.(Make-Cera/Hindware/Parryware/Pryag) |
| 62 | S & F CP jet spray with flexible tube etc complete all as specified & directed. |
| 63 | S&F in repair 15mm bore 2 way angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. |
| 64 | S&F in repair 10 Ltr capacity PVC valveless, polymer coloured, (Polypropeylene Derlin and ABS) syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle icluding bracket, flush pipe of 32 mm dia & PVC connection 15mm size, 450mm long with PTMT nuts, including taking down old u/s cistern any description, complete all as specified and as directed. |
| 65 | S&F repairs single piece Vitreous china wash down water closet pan with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 66 | S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and as directed. |
| 67 | S&F in repair viterous chaina half stall urinal flat back white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waster pipe) including providing and fixing plugh bedding Urinal against wall in CM 1:2 securing Urinal to plug with and including 60 mm long brass screw pointing around urinal back in cement etc including urinal spreader as complete all as specified and as directed. |
| 68 | S&F in repair 15mm bore fancy bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge. |
| 69 | S & F in repairs 15 mm bore Fancy type pillar taps long neck/ swan neck, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 70 | S&F in repair 15mm bore wash basin mixer cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge. |
| 71 | S & F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 72 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm all as specified and directed by Engr-in-charge. |
| 73 | S&F in Repair CP hand shower (health faucet) (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook & wall work incl fixing complete. |
| 74 | S & F CP jet spray with flexible tube 1.0 to 1.5 Rm long etc complete all as specified & directed. |
| 75 | S & F in repairs 6mm thick bevelled edge mirror of selected quality glass with 6 mm thick PVC/ plywood at back, fixed to wooden plugs with screws and cup washers fixed . |
| 76 | S&F 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 77 | S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges. |
| 78 | S&F Rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position including dismantling water tanks of capacity exc 500 ltr abut n exc 1000 ltr and removing to store all as specified and directed by Engr-in-charge. |
| 79 | Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed |
| 80 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 81 | M & L PCC (1:2:4) type B-O using 12.5mm graded stone aggregate as in sub base of flooring etc, complete all as specified and directed & specified . |
| 82 | Taking down chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each. complete all as specified and as directed. |
| 83 | All as per item 82.00 here in before but area exc 1.5 Sqm & n.exc 4 Sqm. complete all as specified and as directed. |
| 84 | Providing & Fixing factory made 100% solid WPC (wood polymer composite) door frame 90 mm x 45 mm (moulded) single rebated 32 mm x 15 mm to receive shutter of 30 - 35 mm thickness made from wood polymer composite (Single Extruded process) material comprising of virgin PVC polymer of K value 57-60 (suspension grade) calcium carbonate and Natural fibres (wood powder / rice husk / wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body traded and headed screw having minimum frame dencity of 780 kg/cbm, having good screw holding capacity (screw withdrawal strength of (min990N), minimum compressive strength of 58 N/sqmm, Modulus of elasticity 900 N/sqmm and resistance of spread of flame of class A category with properity of being termite /berer froo, water/ Moisture Proof & fire retardent & fixed in position with SS Dash Fasteners / Hold Fast of require dia and length, all as per specifications drawing as directed by Engr - in - charge. Material test certificate and authentication should be compulsory provided by manufacturing company. |
| 85 | M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of watertanks etc ant type of work complete all as specified and directed. Fe 410 -W (Gde- E- 250) quality-A |
| 86 | M&L for 35mm thick factory made ASCU vacuum pressure treated kiln seasoned IInd class hard wood plain framed panel shutter (two panels or more) with lock rails and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I) 2001, complete all as specified and directed. |
| 87 | Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 88 | Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 89 | S&F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc. |
| 90 | Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 91 | Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified. |
| 92 | S&F Steel windows with side hung shutters including projecting type hinges with steel handles or steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 93 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed. |
| 94 | Supply & fixed for sheet glass 3mm thick, ordinary quality and glazing with oil putty, in square n.exc 0.5 Sqm each and glazing with oil putty to steel window complete all as specified. |
| 95 | S & F Aluminium anodised or powder coated door, window, ventilator frame with one or more rebates and shutter sliding or casement windows as reqd. including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc, complete all as specified and directed. |
| 96 | Supply & fixed for poder coated aluminium grill of 7.00mmx3mm thick section square, rectangular, triangular, circular shape aperture not exc 7 cm in length or width fixed with H or F channel complete all as specified and directed. |
| 97 | S&F 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 98 | Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including SS brackets, decorative fincals and wall to wall fixed with screw and plugs as directed by Engr-in-charge. |
| 99 | M&L for Vitrified out door tiles 40 cm x 40 cm x 10 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6. |
| 100 | Grinding, cutting and polishing (Granite finish) of existing kota stone floor and making mirror polishing, complete all as specified. |
| 101 | M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of oil bound distemper tinted on walls complete all as spd and as directed by Engr-in-charge. |
| 102 | All as per Ser item No 101 above but two coats |
| 103 | All as per Ser item No 101 above but on ceiling. |
| 104 | M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping , down smoke soot and greasy spot etc, and applying one coats of weather proof exterior emulsion paint (Apex) on wall/Floor surfaces, colour as approved by GE |
| 105 | M&L for preparation of old paver block/ chequered tiles foors any pattern by brooming down or steel wire brushing for removing caked mud, trading oil and greasy spots, cleaning with water etc. and applying two coats glossy Indigo floor coat emulsion paint premium series complete all as specified and directed. |
| 106 | M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed. |
| 107 | M&L Cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) 75 mm thick in plinth protection/path and provided joints 10 mm wide & full depth at 3 m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed. |
| 108 | S& F Ready made chajja with iron frame work and 2 mm thick polycarbonate sheet of wide 0.60 meter iclunding all fittings and fixture, drilled for fixing of steel sheeting or other covering ,including dismantling of existing any type of chajja, etc all as specified and directed by Engr - in - charge, Please Enable Macros to View BoQ information |
| 109 | S& F Ready made chajja with iron frame work and 2 mm thick polycarbonate sheet of wide 0.60 meter iclunding all fittings and fixture, drilled for fixing of steel sheeting or other covering ,including dismantling of existing any type of chajja, etc all as specified and directed by Engr - in - charge, Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender