Tender For Road Safety Work At Biramhimpur Abadiya On Etah Aliganj Kayamganj Farrukhabad Road (Sh-121).
Tender Value
5.60 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
4 days left
EMD
56000
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Farrukhabad → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work At Biramhimpur Abadiya On Etah Aliganj Kayamganj Farrukhabad Road (Sh-121).
BOQ
| Sl. No. | Item Description |
| 1 | TRAFFIC SIGNS-STOPProviding and fixing of retro-reflectorised Stop sign (900 mm high octagon) cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, friced cover aluminium sheeting type IV, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.Retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & proof of the same in form of goverment report shall be uploaded while quoting tender.(Size 900 mm high octagon)(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 2 | Delineator supply & fixing of M S Delineator made of Mild steel with pure poyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection aganst corrosion the surface should be concreated so that there should not be any exposed surface without powder coating atemaively these metal gude pois can be concreated with thermoplstic body. The postes shall have tan esiploical or circular design with the height of the pole whall be 800 to 900 mm above the ground with about 200 to 300 base which can be anchiored onto the ground Mild steel Guide ples shall conform to Type XI sheeting specification as per IRC-67 and AsTM D4956 which would ersure to obtaint clear visbilty of the road aligment during night time. The Retro reffectie sheeting shall be tested for certificate of having the sheeting lasted for coefficient of retro rafction daytime colour and luminance shrinkage flexbiklty lier removal adhiestion impact res stance sequir gloss and fungusressistance 3 years outdoor weathering and its having passed these tesis shall be obtined from interational Government Laboratory/institute by the manufacturer of the sheeting and in case the certificate is obinted foom insentailonal conditon it should also be obtained from indian conditon within 3 years of lunching of product by the manufacture in abroad. Attematively a certiface conforing to ASTM Specification (D4956-09) on anticoal acceleared weathering requirments form a reputed laboratory in india can be accepted provisinnaly in such a situation the Employer/client it so casired could seek for a performance guarantee with would be reaased after recept of certifacte meeting the requiremnt of three years coldorr weathering of the sheeting as per IRC-67 2012 & Prof of the same Report tshall be uploaded which quoting tender. The rate shall include all material labour T&P transporation instations and incdentais all complete as per direction of the Engineer- in- Charge as per LKO SOR(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 3 | TRAFFIC SIGNS-SINGLE CHEVRON (NORMAL)Providing and fixing of retro-reflectorised SINGLE CHEVRON (cautionary, mandatory and informatory sign) as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, friced cover aluminium sheeting type IV, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.Retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & proof of the same in form of goverment report shall be uploaded while quoting tender. (Size 50x60 cm single chevron)(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 4 | TRAFFIC SIGNS-SPEED TABLEProviding and fixing of retro-reffectorised coutionary mandatory and informatory sign as per IRC 57 mad of high intensity grade sheeting vide clause 8013 head cover aluminum sbling 1.5mm thick supported on a mild steel angle iron post 75mmx75mm x6mm firmly fixed to the ground by means of property digined foundation with M-15 grade cement cone 45cmx45cmx60cm,60cm below ground fuel as per approved drawing (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 5 | Providing and fixing of retro-reflectorised CAUTIONERY SIGN BOARD (cautionary, mandatory and informatory sign) as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, friced cover aluminium sheeting type IV, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. Retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & proof of the same in form of goverment report shall be uploaded while quoting tender.(Direction and Place Identification signs with size more than 0.90 Sqm Size Board) Left / Right side Road, T and Left/ Right hand Curves (Size 90Cm equilateral tringle with diffinitation Plate Size (20cmX60cm) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 6 | Providing and fixing of retro-reflectorised INFORMATORY SIGN BOARD (cautionary, mandatory and informatory sign) as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, friced cover aluminium sheeting type IV, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. Retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & proof of the same in form of goverment report shall be uploaded while quoting tender.(Direction and Place Identification signs with size more than 0.90 Sqm Size Board) Speed Breaker,Bank/ Hospital/Petrol Pump, School,Abadi Name.(Size 80cmX60cm rectangular with diffinrtation Plate (20 cmx60 cm) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 7 | Thermoplastic Compound (Repeated Bar)Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm. Area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 8 | Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the granular surface cleaned with mechanical broom. (bitumen consuption as per E.in.C. Circular No. 10598 MT / Samanya Varg / 60MT / 2012 dated 23.11.2012) For Rumble Strip(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 9 | Providing and laying Dense Graded bituminous macadam with 100-120 T.P. batch type HMP producing an average output of 75 tonns per hour using crused aggregates of specified grading premixed with bituminous binder @4.5 percent weight of total mix and filler, transpoting the hot mix to work site, laying with a hydristatic paver finisher with sensor control to the required grade, level and lignment, rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compatction as per MoRT&H Specifications clause 507 Sr. No 5.6 complete in all respects.. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 10 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 11 | Supply and fixing of reflective raised pavement markes(Cat Eye) with its body surface made of tough polyerbonate and its reflective lens made of polycaronate micro prismatic lens (capable of providing total internal reflection) RPM(without shank) as per ASTM as per SOR LKO (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 12 | Providing and laying Road Marking as per IRC:35-1997 using Thermoplastic (Hot Application) colour white/yellow by indigenous manually propelled road marking machine with single coat of 2.5mm thick as directed by Engineer-In-Charge including cost of conveyance all in gradients such as Binders, Glass beads, Titanium-di-oxides, Calcium - carbonate pigments as per MORT&H specification of clause-803.4.1.2 for the preparation of Thermoplastic requirement for Glass beads shall be table No.803.4.1.3 of MORT&H specification including cost of all materials, labour, T&P and hire charges etc.required for proper completion of work at site..(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) |
| 13 | Supply and Fixing Retro Reflective Marking Tapes minimum wide on poles, concrete chairs etc. all material, labour T&P etc also including labour cess, royalty and all other applicable taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. (Market Rates). Including supply of all Material Labour, T&P etc also including labour cess, royalty and all otherapplicable Taxes (But excluding GST) required for propercompletion of work as per direction of Engineer-in-charge. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender