Tender For Special Repair Of Sub Unit Mess At Ramgarh Under Ge (Af) Jaisalmer
Tender Value
40.58 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
8 days left
EMD
81164
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Sub Unit Mess At Ramgarh Under Ge (Af) Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Taking down window chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each. complete all as specified and as directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 3 | Taking down & Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening after chiseling and making free to move or changing the hinges complete all as specified and directed. (Note : - Hinges shall be measured and paid separately) |
| 4 | M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 5 | S&F 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete |
| 6 | S&F 2nd class Hard wood glazed/skeleton shutters 35mm thick open rebated prepared to receive glass, gauze etc devided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc. complete all as specified and as directed. |
| 7 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed to aluminium windows / wooden doors fixed with GI wire staples all as specified & directed |
| 8 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete as per directions of Engineer-in-Charge. |
| 9 | S&F anodised aluminium expanded metal mesh of any size/shape for window/ventilator fixed in Aluminium frame with aluminium snap beading, screws etc. all as specified and directed. |
| 10 | S & F 4.8 mm thick sheet glass, selected quality and fixed to aluminium door/window in square exc 0.5 sqm in each pane complete all as specified and as directed. |
| 11 | S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm. complete all as specified and as directed. |
| 12 | All as per item No 11 here in before but in repairs |
| 13 | S&F aluminium anodized barrel tower bolts 150 mm long fixed complete all as specified and as directed. |
| 14 | All as per item Ser No. 13.00 here-in before but in repairs |
| 15 | S&F aluminum anodized handle cast type 150mm size |
| 16 | S&F in repairs extruded Aluminium alloy handle fabricated type, anodised of size 150mm. complete all as specified and as directed. |
| 17 | S&F MS Door spring (Capsule type ) 150mm long and including roller and roller plate complete all as specified. |
| 18 | S&F butt hinges 100mm long size medium weight cold rolled mild steel . |
| 19 | S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm th rigid PVC foam sheet reinforced with MS sq tube as per specification complete |
| 20 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing. |
| 21 | S & F in repairs PVC door( back side) stopper 75mm long complete all as spd and dir. |
| 22 | M&L for Preparation of old painted wooden surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint of any tint etc complete all as specified and directed. |
| 23 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not other wise described and applying one coat of synthetic enamel paint complete over coat a primer all as specified |
| 24 | S&F of Stainless steel Curtain rod 25mm dia with side bracket fixed with stainless steel matching pair of brackets fixed at both ends with screws on walls/beam including matching lattu fixed as in repair complete all as specified and directed. |
| 25 | Taking down cement plastering on brick or stone walls, etc.including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 26 | M&L for Rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfacces and stone masonary and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 27 | M&L for rendering 15mm thick on fair faces of brick or concrete or stone wall surfaces in cement mortar 1:4 mixed with WPC @ 3% by weight of cement content complete all as specified and directed. Note:-Water proofing compound shall be measured and paid separately. |
| 28 | M & L for rendering 5 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M & L for preparation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of tinted oil bound distemper on walls complete all as spfd. |
| 30 | M&L Preparing newly plastered or un plastered surfaces of wall/ceiling and applying two coats of oil bound distemper over a coat of primer on new plastered surfaces complete all as specified and directed. |
| 31 | M&L for two coat of cement base paint to old decorated surfaces of wall incl preparation of surface & curing complete after complete removal of existing treatment. |
| 32 | M&L for prepration of old decorated plastered surfaces of walls of any description by brooming down or steel wire brushing scrapping down and applying two coat of plastic emulsion paint after smoothening of surface complete all as specified and directed. |
| 33 | M&L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by Engr-in-charge. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 35 | M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 36 | M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 37 | M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. (bed room and other room floor) |
| 38 | M&L for (300mm x450mm) x 6 to 7 mm thick coloured glazed ceramic tiles as in skirting/dado etc over and including 15mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed. |
| 39 | M&L 20mm thick Machine cut Kota stone slab flooring for riser of steps,skerting ,dado etc.over incl 15 mm thick cement mortar 1:6 screed bed or bedding layer and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing etc complete |
| 40 | All as per item sr No. 39.00 here-in before but as in skritng/dado incl 10 mm thick rendering in cm 1:4. |
| 41 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. |
| 42 | M&L for Rounding to edges of stone slabs one edge such as in steps,cooking platform,and other similer situations |
| 43 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for sink. |
| 44 | M&L removing damaged APP modified water proofing membrane and cleaning the surface by wire brush and water complete all as specified and directed |
| 45 | Demolition of cement concrete (unreinforced) in any position n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 46 | Demolition of stone/brick masonry built in cement mortar including coping etc all as specified and directed by Engr - in - charge. |
| 47 | M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:4 etc complete all as specified. |
| 48 | M&L for 20mm thick cement screed in cement mortar 1:4, including finishing even and smooth with out using extra cement mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified. Note - Water proofing compound shall be measured and paid separately. |
| 49 | Supply only integral water proofing compound complete all as specified and directed |
| 50 | M&L aplying evenly one coat of binding material using blown type bitumen confirming to IS-702 Grade 85/[email protected] kg over one coat of cold bituminous oil based primer (IS:3384)(as approved by Engineer -in -charge)@ 250 gm/sqm over plaster surfaces including cleaning surfaces of complete all as specified. |
| 51 | M&L For APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by LPG torched forched application complete all as specified. |
| 52 | M&L for Preparation of Roof treatment surface and applying two coats of Aluminium Paint on Roof Slab complete all as specified and directed. |
| 53 | Demolition of Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and directed |
| 54 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 55 | M&L 100mm thick Cement concrete 1:4:8, type D-2 ( using 40mm graded stone aggregate)as in sub-base/hard standing complete all as specified and directed. |
| 56 | M & L sand filling under floors or in cushion layer complete all as spd and dir. |
| 57 | M & L for machine pressed precast concrete interlocking paver block rubber moulding any shape and size with grey cement and pigment cnfirming to IS-15658-2006 of 60 mm thickness, M-35 grade over and 25mm thick sand/stone dust complete all as spfd & directed by Engr-in-Charge. (Sand cusion paid separetely) |
| 58 | M&L 50mm thick Cement concrete 1:2:4, type B-2 ( using 40mm graded stone aggregate)as in path complete all as specified and directed. |
| 59 | M&L for chequered cement concrete tiles 300mm X 300mm x 25mm thick, set, jointed and pointed in near cement slurry in floor with grey cement and pigment including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 60 | M&L precast , cement concrete 1:2:4 type B1 (using 20mm graded stone aggregte) in kerb stone, rounded or chamfered on edges and the like including weathering, slightiy rounded for chamfered angles and throating including jointed, pointed in cement mortar 1:4 embeding in the ground complete all as specified and directed. |
| 61 | M&L for preparation of newly concrete surfaces of kerb stone and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 62 | M&L for preparation of old concrete surfaces of kerb stone and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 63 | S&F in repair of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed. |
| 64 | S&F in repair PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing. |
| 65 | S&F of 75mm bore PVC (SWR) bend any radius provided with access door fixed as complete all as specified and directed. |
| 66 | S&F 110mm dia PVC (SWR) bend any radius with access door |
| 67 | S&F 75 mm PVC (SWR) Junction single (Single Y) equal or unequal with access door |
| 68 | S&F 110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door |
| 69 | S&F 110mm dia PVC (SWR) vent cowl |
| 70 | Demolition and breaking up drain pipes of 150 mm dia (Salt glazed ware ,AC or Reinforced concrete ) set in cement mortar including bedding haunching complete all as specified and directed by Engineer-in-Charge |
| 71 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete. |
| 72 | M&L in replacement of 150mm bore pipe reinforced concrete, class NP2, laid and jointed complete with collars complete all as specified & as directed. |
| 73 | M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) in coping, benching of manholes etc, and including necessary formwork and including demolition of existing PCC complete all as specified and directed by Engr - in - charge. |
| 74 | M & L pre-cast RCC 1 : 2 : 4, type B-1 (using 20 mm graded stone aggregate) in cover slabs for man holes etc, set in CM I : 6 and including demolition of old slabs complete all as specified and directed by Engr - in - charge. |
| 75 | M&L MS TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified and directed by Engr - in - charge. |
| 76 | S&F Providing SFRC manhole covers with rectangular frame of size 44\\"x26\\" MD-10 fixed at site up to satisfactoin of Engr-in-Charge and including dismentling of old manhole cover slab complete all as specified. |
| 77 | M&L for removal of blockage in between WC and nahani trap/WC to Ist manhole / floor trap to nahani trap etc. by flexible roding and removal the all dirt up to a distance of 100 m all as directed.Note : (i) In case a blockage reoccured with in 7 days the same shall be removed without any extra cost of the Govt. (ii) Cleaning of line in between manhole where in the blockage remove shall deemed to incl the rate coated. (iii) If contractor failed to clear the blockage with in 24 hours from the receipt of complaint, a penalty of Rs 50 per day will charge up to 7 days and after 7 days same will be Rs 100.00 till completion of complaint. Please Enable Macros to View BoQ information |
| 78 | M&L for removal of blockage in between WC and nahani trap/WC to Ist manhole / floor trap to nahani trap etc. by flexible roding and removal the all dirt up to a distance of 100 m all as directed.Note : (i) In case a blockage reoccured with in 7 days the same shall be removed without any extra cost of the Govt. (ii) Cleaning of line in between manhole where in the blockage remove shall deemed to incl the rate coated. (iii) If contractor failed to clear the blockage with in 24 hours from the receipt of complaint, a penalty of Rs 50 per day will charge up to 7 days and after 7 days same will be Rs 100.00 till completion of complaint. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender