Tender For Addition Alteration To Building No T-349 At Af Stn Jaisalmer
Tender Value
43.58 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
15 days left
EMD
87168
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Building No T-349 At Af Stn Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Taking down door chowkats or frames exc.1.5sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frame). |
| 2 | Taking down door shutters of any description of area exc 1Sqm & n.exc 2 Sqm complete all as specified and as directed. |
| 3 | S&F 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete |
| 4 | M&L for PCC type B-0, 1:2:4 using12.5 mm graded stone aggregates as in bands, bed blocks, fixing hold fasts, filling of door frames etc complete incl necessary formwork all as specified. |
| 5 | Taking down door chowkats or frames n. exc.1.5sqm each with shutters (without taking off shutters from the frame). |
| 6 | S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm th rigid PVC foam sheet reinforced with MS sq tube as per specification compl |
| 7 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing. |
| 8 | Taking down steel window frames n. exc.1.5sqm each with shutters (without taking off shutters from the frame). |
| 9 | M&L for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 10 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 11 | S&F expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer - in- charge. |
| 12 | S & F 4.8 mm thick sheet glass, selected quality (Tinted) and fixed to aluminium door/window in square exc 0.5 sqm in each pane complete all as specified and as directed. |
| 13 | S & F 5 mm thick Figured glass and fixed to aluminium Ventilation in square exc 0.5 sqm in each pane complete all as specified and as directed. |
| 14 | S&F Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed. |
| 15 | S&F 100mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodisedand fixed type B-21 |
| 16 | S&F 100 mm long mild steel butt hinges medium weight cold rolled. |
| 17 | S&F 200 mm size aluminium anodised barrel tower bolt of extruded section . |
| 18 | S&F 300MM Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 19 | S&F 300 mm long ordinary rat rail rod pattern springs including roller and roller plate complete |
| 20 | S&F aluminum anodized handle cast type 150mm size |
| 21 | S& F MS hold fasts and similar small articles conforming to Fe 290 Gde-E-165 |
| 22 | S&F in Repair curtain rod anodised aluminium alloy,chromium plated with fixing brackets, stops, rollers etc. |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 24 | M&L for Double Charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed in cm 1:6.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 25 | M&L for Vitrified coloured ceramic tiles 10 mm thick as in skirting over and including 10m thick bedding layer in CM 1:3 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed. |
| 26 | M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 27 | M&L for Non skid ceramic tiles 7 to 8 mm thick as in skirting over and including10 mm thick bedding layer in CM 1:3 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed. |
| 28 | M&L for (300mm x450mm) x 6 to 7 mm thick coloured glazed ceramic tiles as in skirting/dado etc over and including 15mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed. |
| 29 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or any thickness in floors, aprons etc.complete all as specified and directed |
| 30 | M&L 20mm thick Machine cut Kota stone slab flooring for riser of steps,skerting ,dado etc.over incl 15 mm thick cement mortar 1:6 screed bed or bedding layer and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing etc complete |
| 31 | All as per item No. 30.00 here-in before but as in skritng/dado incl 10 mm thick rendering in cm 1:4. |
| 32 | M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for sink. |
| 33 | M&L for Rounding to edges of stone slabs one edge such as in steps,cooking platform, window cill and other similer situations |
| 34 | Taking up or down steel tubing and connections 15mm bore complete all as specified and directed. |
| 35 | Taking up or down steel tubing and connections 20mm bore complete all as specified and directed. |
| 36 | Taking up or down steel tubing and connections 25mm bore complete all as specified and directed. |
| 37 | Refixing old steel tubing 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) |
| 38 | Refixing old steel tubing 25 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) |
| 39 | S&F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. |
| 40 | S&F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. |
| 41 | S&F steel water tubing `medium grade’ galvanized 25 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. |
| 42 | M &L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall. |
| 43 | S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed. |
| 44 | S & F 25 in repair mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed. |
| 45 | Dismantling existing water tanks of capacity exc 250 & n.exc 500 ltrs lowering from its position and removal to store. complete all as specified and directed. |
| 46 | Dismantling existing water tanks of capacity exc 500 & n.exc 1000 ltrs lowering from its position and removal to store. complete all as specified and directed. |
| 47 | S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed. |
| 48 | S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed. |
| 49 | Disconnecting existing PVC tanks of capacity 500 & nexc 1000 liters of any description , setting aside (or lowering if required ) for repairs, cleaning etc. & hoisting, reconnecting & refixing in position complete incl cleaning of water tanks. |
| 50 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 51 | M & L 15 mm thick rendering in cement mortar 1:6 on stone masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and fair complete. |
| 52 | M&L for rendering 15mm thick on fair faces of brick or concrete or stone wall surfaces in cement mortar 1:4 mixed with water proofing chemical as per manufacturer instructions complete all as specified and directed. Note:-Water proofing compound shall be measured and paid separately. |
| 53 | M & L for rendering 5 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed. |
| 54 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc. |
| 55 | M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:6 etc complete all as specified. |
| 56 | Demolition of existing water proofing treatment, concrete works of any location up to existing Rcc slab by chiesling,drilling,scraping etc.complete all as specified and directed. |
| 57 | M&L for cutting out cracks to V-section in existing roofs or terracing ,cleaning out ,wetting,grouting with cement and sand slurry1:3 |
| 58 | M&L for 20mm thick cement screed in cement mortar 1:4, including finishing even and smooth with out using extra cement mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified. Note - Water proofing compound shall be measured and paid separately. |
| 59 | Supply only Liquid water proofing compound STP No-1 Dr. Fixit or complete all as specified and directed. |
| 60 | M&L for priming over roof surface @0.25 Ltr/Sqm Over a cleaned roof surface and applying one coat of bitumen painting with hot blown grade bitumen 85/25 @1.20 kg/sqm and APP Modified Membrane with non woven polyster reinforcement/mat (centre core ) laid with LPG torch application ,side over lap 75 mm ,end over lap 100 mm and a coat of aluminium primer @100 gm/ sqm on top ,including sealing all joints by thermo fusion ,complete all as per manufacturers instructions. |
| 61 | M & L PCC (1:2:4) type B-O using 12.5mm graded stone aggregate as in Roof padding,fillup undulation,roof kerbs of mud stops or similar work maintain proper slope as requred as specified . |
| 62 | M&L for preparing new plaster surfaces and applying 1mm thick ready mixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete of wall |
| 63 | M&L for complete removal of existing treatment, filling up undulation and applying 1 mm thick readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete of wall |
| 64 | M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by Engr-in-charge. |
| 65 | M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by Engr-in-charge. |
| 66 | M & L for prepariation of new plastered surfaces and applying three coats of white wash on surfaces of ceiling. |
| 67 | M & L for prepariation of old treated surfaces and applying two coats of white wash on surfaces of ceiling. |
| 68 | M & L for prepariation of old treated surfaces and applying two coats of white wash on surfaces of wall |
| 69 | M&L Two coat of synthetic enamel painting on new wooden surfaces exc 10cm width or girth over a one coat of pink primer incl preparation. |
| 70 | M&L for preparation of old painted wooden surface or wood based materials of any description, not otherwise described, over 10 cms widths or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 71 | M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified. |
| 72 | M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 73 | S&F in repair water closet vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest front/back inlet (excluding flushing cistern and flush pipe) including provision of cement concrete bedding in PCC (1:5:10) type E2 and making good to disturb surface. |
| 74 | S&F repairs Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed. |
| 75 | S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified. |
| 76 | S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed. |
| 77 | S & F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including waste coupling with pipe, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mmx330mmx160mm |
| 78 | M&L as in repair kitchen stainless steel plate rack thickness 1.0mm overall size 600x900mm . (Make Prayag: Cat no- P-336 or techno commercially equivalent as approved by GE.) |
| 79 | S & F in repair 15 mm bore long body chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 80 | S & F in repairs 15 mm bore Fancy type pillar taps long neck/ swan neck, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 81 | S&F in repair 15 mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 82 | S & F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 83 | S & F in repairs fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 84 | S & F in repair fancy type chromium plated 15 mm bore two way angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 85 | S & F in repair PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm. |
| 86 | S&F as in Repair wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting 'Continental Range, Model No : CON 273 KNUPR) or equivalent |
| 87 | S&F in Repair hand shower (health faucet) (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook & wall work incl fixing compl |
| 88 | S & F in repairs Chromium plated shower rose size 120 mm dia and round shape incl fixing to steel pipe or union complete all specified. (Make : OHS -1779). |
| 89 | S&F Soap dish stainless steel any type, fixed to plugs with chromium plated brass screws |
| 90 | S&F 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 91 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with fixing chromium plated bracket, guard and railing 55/56cm long complete. |
| 92 | S & F in repair PVC cabinet of 330x430 mm overall size with looking mirror of selected quality glass. |
| 93 | S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges. |
| 94 | S & F in repair PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement. |
| 95 | S&F in repair PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing. |
| 96 | S&F in repair 110mm dia PVC (SWR) bend any radius with access door |
| 97 | S&F in repair 110mm dia PVC (SWR) bend any radius. |
| 98 | S&F in repair 110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door |
| 99 | S&F in repair 110mm dia PVC (SWR) vent cowl . |
| 100 | S&F in repair PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to walls including digging and making good as existing. |
| 101 | S&F in repair 75 mm PVC (SWR) Junction single (Single T) equal or unequal with access door . |
| 102 | S&F in repair 75mm dia PVC (SWR) bend any radius. |
| 103 | S&F in repair 75mm dia PVC (SWR) bend any radius with access door . |
| 104 | S&F in repair 75 mm PVC (SWR) Junction single (Single Y) equal or unequal with access door . |
| 105 | S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 110mm pipe complete all as specified |
| 106 | S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 75 mm pipe complete all as specified |
| 107 | M&L for salt glazed stone ware gully trap size 150x150mm, square,type 'P' including setting and jointing to drains with cement mortar 1:1 and CI grating including demolition of existing traps complete all as specified and directed |
| 108 | M&L Block boards,18/19 mm thick grade 2 quality, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame work in cup board shutters, partitions, shelves, cupboard drawers,cabinet, pelmet boxes and similar work . |
| 109 | S & F hasp and staple of size 100 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hing plate and fixed with screws. |
| 110 | S&F 125 mm Extruded brass handles,fabricated type polished. |
| 111 | M&L for PVC Frame of solid PVC foam of size 45mmx20mm of any colour complete all as specified and directed. PVC Frame Make-Accucel/Rajshree/Duroplast |
| 112 | Dismantling wrought iron or mild steel work of any description not otherwise provided for balcony railing,etc |
| 113 | S & F mild steel work in framed work such as grills, gratings,framed guard bars etc. with ends of bars shouldered and/ or riveted, or forged into spikes, and in ladders,railings, frame of water tank etc.and similar work confirming to Fe- 290 Grade E-165. |
| 114 | M&L Cement concrete(1.3.6) type C2 using 40 mm graded stone aggregate in ladder foundations, etc filling and mass-concrete . |
| 115 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 116 | M&L PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation ,Sub base of Flooring etc complete all as specified and directed by Engineer-in-Charge. |
| 117 | M&L 100mm thick Cement concrete 1:4:8, type D-2 ( using 40mm graded stone aggregate)as in sub-base/hard standing complete all as specified and directed. |
| 118 | M & L sand filling under floors or in cushion layer complete all as spd and dir. |
| 119 | M & L for machine pressed precast concrete interlocking paver block rubber moulding any shape and size with grey cement and pigment cnfirming to IS-15658-2006 of 60 mm thickness, M-35 grade over and 25mm thick sand/stone dust complete all as spfd & directed by Engr-in-Charge. (Sand cusion paid separetely) |
| 120 | M&L PCC 1:2:4 Type B1 ( 20 mm graded aggregate) cement concrete in cills, steps;seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 121 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets. |
| 122 | Supply and Fix of GI snap grid frame work for false ceiling of size 605x 605 mm, supported with GI hanging wires from roof and all necessary fittings and fixtures as specified and as directe |
| 123 | Material & Labour for Non asbestos fibre cement building boards 4mm thick fixed or laid/inserted to timber/GI/Aluminium framework with screws as in ceiling flat all as specified. |
| 124 | S&F steel work in tubular trusses/purlines/columns incl special shaped washer etc complete using ERW butt welded tubes conforming to IS 1161-1979 |
| 125 | S&F of Mild steel (Fe 410-W,Gde E- 250)quality A in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated). |
| 126 | S&F Plates (plain or chequered)(Fe 410-W,Gde E- 250) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment |
| 127 | S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 128 | M&L for painting steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of new surfaces, priming with red oxide and two coats of synthetic enamel paint. |
| 129 | Material and labour for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed. |
| 130 | Material and labour for extra over stone walling for hammer dressing with maximum depression not exceeding 20mm to face stones and dressing of face beds and joints as specified for squared rubble walling, Jodhpur type, brought upto courses complete all as specified and directed. |
| 131 | Material and labour for keyed pointing to squiared rubble masonry or brought upto courses , Jodhpur type, in cement mortar (1:4) complete all as specified and directed. |
| 132 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 133 | Taking down carefully aluminium point wiring on wooden battens/through conduit (light fan, socket or power) complete with fittings such as switches, wooden batten, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engineer-in-Charge |
| 134 | M&L for concealed conduit point wiring controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 25 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly including Suitable Modular Metal flush mounting box complete all as specified and directed for the following :- |
| 135 | All as per Item Sr No. 134.00 here-in before but One light point/ Exhaust fan point controlled by one, one way switch |
| 136 | All as per Item Sr No. 134.00 here-in before but One fan point controlled by one, one way switch |
| 137 | All as per Item Sr No. 134.00 here-in before butOne socket outlet 3 Pin, 6 Amp on same board |
| 138 | All as per Item Sr No. 134.00 here-in before but with 2.5 sqmm for phase &neutral and 2.5 sqmm for earth wire for socket out let 5 Amps on independent board. |
| 139 | All as per Item Sr No. 134.00 here-in before but with 4 sqmm for phase &neutral and 4 sqmm for earth wire for socket out let 15 Amps on independent board. |
| 140 | S&F Modular switch 6 Amp 250 V AC one way one module and including white colour plates with frame for modular fitting Complete all as specified and directed. |
| 141 | S&F Modular switch 16 Amp 250 V AC one way with indicator one module and including white colour plates with frame for modular fitting Complete all as specified and directed. |
| 142 | S&F Modular Socket, 6A - 2/3 pin combined 2 module and including white colour plates with frame for modular fitting Complete all as specified and directed. |
| 143 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module and including white colour plates with frame for modular fitting Complete all as specified and directed. |
| 144 | S&F Modular Fan regulator step type, 120W - 2 module and including white colour plates with frame for modular fitting Complete all as specified and directed. |
| 145 | S&F Modular AC Socket and heavy duty plug with metal box for AC, 3 Module, Single Pole MCB not less than 20 Amps, repturing capacity 10 kA including taking down old unserviceable complete all as specified and directed. |
| 146 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/ Polycarbonate,isolated body (ISI Marked) complete all as specified and directed. |
| 147 | Taking down old unserviceable Distribution board any type complete all as specified and directed. |
| 148 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 amp rated copper bus bar 240 Volts 4 way single pole and neutral complete all as directed by Engineer-in-Charge. |
| 149 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral complete all as directed by Engineer-in-Charge. |
| 150 | S&F for Surface mounting and Flush Mounting Sheet Metal/steel enclosure,dust and vermin proof VTPN Distribution Board, 4 Ways, Double Door(IP-43), built- in bus bars complete suitable for 415 Volts, AC, 50 Hz supply, suitable for incoming MCCB and outgoing MCBs and fixed in recess in brick masonary wall complete all as specified and directed by the Engineer-in-Charge. |
| 151 | Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- |
| 152 | S & F MCB, 5 to 32 Amp, SP, 240 Volt, 10 KA, 'C' curve complete all as specified and directed. |
| 153 | S&F MCB, 40 to 63 Amp, SPN, 240 Volt 10 KA, 'C' curve complete all as specified and directed. |
| 154 | S & F 4pole MCCB 63 to 100 Amp,50hz,415 V with rupturing capacity 25KA. |
| 155 | Supply and fixing Surface and wall mounted LED tube light fittings of cap 10W, Two feet Basic all purpose surface and wall mounted LED batten with extruded PVC housing & integrated electronic driver all as specified and directed. |
| 156 | Supply and fixing TITANIA LED tube rod 1x20 Watt (single side connection) (4 ft). Make - Havells Cat No-TITANIANEO1213T8SSTL20WLED865SPC or techno commercially equivalent as approved by GE. |
| 157 | Supply and fixing Industrial REGAL batten for LED tube rod 1x22 Watt (single side connection) (4 ft). Make - Havells Cat No-REGALBATTENT8UPTO1X22WSSBSWH or techno commercially equivalent as approved by GE. |
| 158 | Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 6.00 Sq mm 1100 volts grade including one 6.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping/conduit incl Note : Two run of 6.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor shall be measured & paid as one unit. |
| 159 | Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 4.00 Sq mm 1100 volts grade including one 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping / conduit incl. Note : Two run of 4.00 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit. |
| 160 | Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 10.00Sq mm 1100 volts grade including one 10.00Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing incl. Note : Two run of 10.00 Sqmm cable and one run of 10.00 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit. |
| 161 | M&L for LED Panel 36 watt with 2ft x 2 ft slim panel with super bright Recess mounting LED Slim ceiling light with white powder coated extruded aluminium housing and highly efficient light smoothing optics to deliver superior illumination including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23/0.0076 including taking down old unserviceable fittings complete all as specified and directed. |
| 162 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I.(ii) Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate. |
| 163 | S & F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire |
| 164 | Taking down and refixing carefully ceiling fan 230 volts single phase 50 Hz from the position after dismantling fan blades of any sweeps and carrying out complete servicing with and including cleaning, greasing,re winding, replacing flexible 3 core cable of size 1.5 Sqmm with copper conductor from ceiling rose to fan, replacing rubber reel, split pins, check nuts, PVC connector complete with and including painting with 2 coats of synthetic enamelled paint over a coat of red oxide anticorrosive primer after rubbing entire fan body and blades and fixing back the fan in position complete all as specified and directed. |
| 165 | Supply and fixing of ceiling heavy duty metal D hook/ electrical fan box incl Fastners complete all as specified and directed by engr in charge |
| 166 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V,50 Hz, RPM 1400, Copper winding of size 300mm sweep with, blades, and frame and louvers including making hole suitable size in stone/brick masonary/wall/cutting the window or ventilator and making good the surface existing surface complete all as specified and directed. |
| 167 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1300, Copper winding of sweep 250mm sweep including making hole suitable size in stone/brick masonary/wall/cutting the window or ventilator and making good the surface existing surface complete all as specified and directed. |
| 168 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete with including suitable size of GI pipe length , clamp and nut bolt etc. |
| 169 | Supply,laying and testing cable XLPE insulated,screened,PVC bedded,galvanised steel strip or wire armoured,electric power cables(heavy duty)1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core |
| 170 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5M in depth for laying pipe line, replacing sluice valve etc and getting out in soft / loose soil all as specified and directed. |
| 171 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil including making good of disturbed surfaces complete all as specified and directed. |
| 172 | Removing excavated soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 173 | Supply and Laying of HDPE DWC pipe dia 50/38mm (outter/inner) with including fitting like couplers, bends, and end caps and etc consists of two layer, The outer layer smooth to facilitate easy cable pulling, Primarily used for underground cable ducting for electrical networks to provide mechanical protection with standards IS:16205 (Part-24) 2017 all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender