Tender For Provision Of Mobile Dg Set Along With Associated Works At Af Station Bhisiana Under Ge (Af) Bhisiana
Tender Value
72.33 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
22 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Mobile Dg Set Along With Associated Works At Af Station Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and commissioning of Eco friendly of 100 KVA silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, AC 415 volt, 50Hz, .08PF at 1500 RPM acoustic enclosure made out of CRCA Sheet powder coated, specially designed lifting arrangement/hooks, meet the latest CPCB IV+ norms for Noise and Exhaust Emission engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and self exciled, self regulated, Automatic voltage regulation, class 'H' insulation type alternator, with Semi Automatic control panel complete all as specified and directed by Engr-in-Charge. NOTE : The following accessroies are required for Ser Item No. 1 above i.e DG Set 100 KVA :- (i) Engine (a)Liquid cooled, Turbocharged after cooled develping at 1500 RPM (b)Compression ignition(c)G3 as per ISO 8528 Part V class governor(d)Battery Charging alternator(e)Dry type Air cleaner with service indicator, CRDI system(f)Lube Oil & Fuel filter, DOC(g)Radiator with fan(h)Electric starter motor with soft starting system(ii) ACOUSTIC ENCLOSURE(a)The Enclosure is of modular construction.(b)Durable industrial locking system is provided on doors(c) The sheet metal components are 7 tanks pre-trreated and is Polyester based powder coated for long life |
| 2 | (iii) Alternator (a) Continuous operation rated at 1500 rpm, 415V,.80 PF, 50.00Hz Ph in SPDP enclosure, self -excited, self -regulated Brush less, floor mounted as per IS:4722.BS EN 60034-1 & suitable for tropical condition.(b) Specially designed sound attenuators are provided to control sound at air entry & exit points inside the enclosure.(c)The walls of enclosure are insulated with the fire-retardant & In-build draw in type fuel tank.(d)The walls of enclosure are insulated with the fire-retardant & noise absorbent foam/Rockwool so as to comply with the noise level of 75dB (A) at distance of 1 mtr, in open free field envirement as per ISO 8528 part 10 specified by ministry of Envirement & Forest.(iv) Batteries :- Maintenance free suitable batteries of 12 /24 Volt complete with copper conductor multistranded leads of suitable length from self starter to the battary terminals complete with initial charge and initial fill of electrolite complete as recommended by OEM.(v) Handling and operation : (a) Low vibration,best in class fuel consumption with electronic fuel injection system(b) Class G3 Governing in its range. Which gives better accuracy in decreasing the speed drop in transient and lowering the recovery time of the speed.(c) Confirms to statutory Govt. CPCB IV+ emission & noise level norms(d) Nuts-bolts and hardware are of stainless steel for longer life(e) Doors are gasketd with high quality EPDN gaskets to avoid leakage of sound.(f) Low cost of service, spares and operation cost.(g) Sheet metal components are 7 tanks pre-treated and is polyester based powder coated for long life.(vi) Generator Monitoring Panel :(a) Microprocessor based genset contoller (POWER COMMAND for metering, monitoring, governing and protection. (b) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown)(c) Alternator protection parameters like under voltage, over current, under frequency, over frequency (Alarm & shut down)(d) Relay drivers for remote annuciations(e) Cyclic cranking(f) Auto/manual start/ stop(g) Alternator trim adjustment from the front key pad(h) Operates within a temperature range 0- 60 degrees Calsius and humidity upto 95%(j) Remote monitoring capabilty through separate interface modules. |
| 3 | (k) Genset metering parameters like lube oil pressure, coolant temperature, engine speed(rpm), run hours, DC voltage, intake manifold temperature, 3 phase volts and 3 phase amperes, frequency, KW, KVA, power factor etc. (vii) Safety Controls : - Engine low lube oil pressure, high water temparature and over speeding of engine(viii) Coupling arrangement : - Flexible coupling, fly wheel to suit flexible coupling fly wheel housing.(ix) Accessories :- AVM Pads built or separtely mounted to manufacturer base frames.(x) Base Frame : - Made out of ISMC 250 of sturdy design made of MS channel with necessary reinforcement and predetermined holes.(xi) Semi Autumatic CONTROL PANEL:- The Semi Autumatic panel will be integrated with the DG set homogeneously and completely synchronized and communication compatible, front opening type protection, duly powder coated, with electrolytic grade copper bus bar of appropriate capacity for four poles with all standard switch gear, graphical LCD display & protection, internal wiring of adequate size PVC insulated multi-threaded copper conductor cable etc (Control panel must shows these parameters Current, Voltage, KW, KVA, PF, RPM, Hz, KWH hooter etc. inbuilt provided with microprocessor-based protection unit for Engine alternator.) (a) Microprocessor based MCCB 3 pole, including 3-Ph contactor and O/L relay for alternator.(b) Digital Ammeter 0-800A with selector switch of suitable capacity with CTs (c) Digital Voltmeter with slector switch (d) Digital frecuency meter(e) Digital KW meter(f) Digital KWH meter panel mounted type(g) Digital PF meter Note:- (i) The contractor shall submit specification and drawing for approval of the CWE before procurement of the Transformer.(ii) Testing of the DG set shall be carried out by the SEI |
| 4 | Supply, installation, testing and commissioninng of road based Mobile Trolley suitable for 100 KVA DG set (02 Nos) and for 100 KVA Transformar (01 No.) with weather proof enclosure with four rubber tyres and maximum turnig diameter, hook at the front along with a spare wheel with minimum ground clearance of 250 mm with mud guards and rear, front and side reflectors sliding type with PVC ladder fitted below the base platform and should non removable. Other specification of trolley is as under :-(a) Main beam - Main beam made of MS Channel size 350x150 MB, cross members MS channel size 200x100 MB(b) Axle - 02 Nos, Axle MS 125 mm round with water proof steel forged Hubs and new Taper Roller bearing.(c) Suspension Units - 04 Nos Semi Eilliptical Leaf spring size 13/75 thk each spring consists 15 leafs and landing gear are mechanical type(c) Turn Table - Turn table made of MS channel 125x 75 mm with Angle rings 40 x 6 mm and pipe Bushes with Locking Bolts 50 mm including the trolley handle will be capable of turning 90° in either direction with minimum turn radius for towing by Vehicle. including fixing of cable drum of metal body with axel and handle for rotating the drum suitable for roll of cable of size upto 185 sq mm(d) Draw Bar - Triangular Draw Bar, Detachable type 4 ' long made of MS Channel 75 x 40 mm(e) Towing arrangement - Spring loaded steel towing Hook of 50 mm round.(f) Floor sheet - Floor fully cover with 10 mm thick MS Sheet(h) Tyre assembly - 4 Nos New tubeless tyre assembly (Nylon) std Make ( Make approved by Engr-in-Charge)(j) RIM - 04 Nos heavy duty new RIM Assembly.(k) Finishing and painting - Finishing with Grinding and 01 coat of Red Oxide (Primer) and 2 coats of super synthetic Enamel paint.(l) Fittings - Necessary fittings like light reflectors 3 M tape, 02 Nos Name/Number plates. (m) Accessories- 01 No Tool Box.Notes - (i) All fabrication electrically welded and finished with grinding. (ii) The DG set will be mounted with suitable anti vibration modules and will be fit to run 60 KMPH on road as complete as required. (iii) The contractor shall submit specification and drawing for approval of the CWE before procurement of the Transformer.(iv) Testing of the DG set shall be carried out by the IEM |
| 5 | Supply and fixing on load changeover switch upto 250 Amp 4 Pole 415 V, 50Hz in sheet steel enclosure for surface mounting with padlocking facility with the connecting accessories complete all as specified and directed by Enge-in-charge. |
| 6 | Supply and laying testing cable XLPE 1100 Volts of size 3.5 core 120 Sqmm, insulated, screened PVC bedded,galvanised steel strip or wire armoured, electric power cable (Heavy duty) complete all as specified and directed by Enge-in-charge. |
| 7 | Supply , installing, testing and commissioning of outdoor BEE 5 star rated type step down transformer 11000/433 volts (at no load), AC , 3 phase 50 Hz , copper wound type complete with standard fittings, 11 KV 3 phase , LT 433 volts, 3 phase 4 wire with on load tappings on HT side to vary secondary voltage within limit, all as per IS: 1180 (with latest amendments) of capactiy 100 kVA.core type copper wound,oil immersed, naturally cooled, oil nature,air nature(ONAN) with external cooling tubes/fins delta connected on primary side (HV) and star connected on secondary side(LV) in accordance with vector symbol DYN-11(Vector group) with neutral brought out on secondary side (LV side ) and having tapping at +5% to -10% in steps of 2.5% side to be changed by means of hand operated off load tap changer gear. the maximum temparature rise should not exceed 40 degree celsius in oil and 45 degree celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient temparature of 40 degree celsius. The transformer shall be IS 1180 marked energy efficient level 2 complete all as specified and as directed by Engr-in-charge |
| 8 | Supply and fixing of XLPE 11000 volts, grade cross sectional area 95 sqmm. 3 core, insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, complete all as specified and directed by Engr-in-charge. |
| 9 | Supply and fixing of Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable XLPE armoured aluminium conductor cable of size 95 sq 3 core complete all as specified and directed by Engr-in-charge. |
| 10 | Supply and fixing of cable with copper conductor 60RM (16 sqmm ) PVC round sheathed flexible with copper bonded rod of 20 mm x 1 mtr x 4 Nos (02 for Neutral + 02 for Body Earth) and all connecting assessories for earthing, complete all as specfied and directed by Engr-in-Charge. |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender