Tender For Special Repair Works To The Existing Hospital Building Such As Providing Wall Tiles, Roof Leakage And Painting Works In Special Prison For Women, Vellore In Vellore District Under Maintenance Of Prison Buildings And Staff Quarters For The
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Nov 2026
10 days left
EMD
26200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Works To The Existing Hospital Building Such As Providing Wall Tiles, Roof Leakage And Painting Works In Special Prison For Women, Vellore In Vellore District Under Maintenance Of Prison Buildings And Staff Quarters For The Year 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | DM-R-PT-OC) Removing of One Course of Pressed Tile Roof finish in cement mortar including all tools and plants required etc. |
| 2 | DM-FL-TI-CM) Removing of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs |
| 3 | Clean removal of old cement plastering both inside and outside from the existing walls of brick masonary without damaging the existing structure and surroundings and clearings the debris away from the side including cost of required tools and plant and necessary etc. |
| 4 | BW-MW-KB-CM 1:6)Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) for super structure in the following floors including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., BW-SS-KB-CM 1:6-(GF)b. In Ground Floor/Stilt floor |
| 5 | BW-SS-KB-CM 1:6-(1F)c. In First floor |
| 6 | PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding, etc., |
| 7 | PL-CL-CM 1:3-10mm thick) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick for bottom of roof, stair, waist, landing and sunshades in all floors finished with neat cement including hacking the areas, providing band cornice, scaffolding, curing etc., |
| 8 | FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfaces as detailed below with all cross bracings using mild steel sheets of size 90cm x 60cm and MS 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak or country wood joists of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13cm dia spaced at 75cm intervals and removing the same after a specified period without damaging the R.C.C works etc., FW-SS-WS-PSb.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works |
| 9 | CN-F&S-RCC-M20) Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cum) 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum) 5156 Kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670Kg of crushed stone sand (for making 10 cum) CN-SS-RCC-M20-(GF)b. In Stilt /Ground Floor |
| 10 | CN-SS-RCC-M20-(1F)c. In First Floor |
| 11 | CN-F&S-PCS-M20-20/40-(5F)) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M20 for the following thickness excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position complying with relevant standard specifications etc., complete in the following floors (Measurement will be taken including bearing in wall also)II. 40mm thickCN-SS-PCS-M20-40-(GF)b. In Ground floor |
| 12 | TL-FL-CT-CM 1:3) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc. |
| 13 | TL-FL-GS-CM 1:3-(GF)) Supplying and laying of following colour Granite slabs (superfine polished with machine cut edges) of size 4'-0'x 2'-0' of 18 to 20 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick including Cost of Mortar Plasticizer (Liquid) at 200ml per bag fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc., TL-FL-GGS-CM 1:3c. Synthetic Grey, Paradise and similar varieties |
| 14 | TL-RO-PT-CM 1:3) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc |
| 15 | Acid washing the existing floor tiles and walls tiles to make it dirt free including cost of materials and laboursetc.., as direct by the department officers. |
| 16 | WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/UPVC/GI specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc.WS-EX-ASTM-32 PVCa) 32mm dia ASTM D schedule 40 threaded pvc pipe with necessary PVC/GI specials. |
| 17 | WS-EX-ASTM-25 PVCb) 25mm dia ASTM D schedule 40 threaded pvc pipe with necessary PVC/GI specials. |
| 18 | WS-EX-ASTM-20 PVCc) 20mm dia ASTM D schedule 40 threaded pvc pipe with necessary PVC/GI specials. |
| 19 | WS-EX-WST-HDPE) Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) of approved brand (superior variety) with ISI Mark (marked with tank itself) with top lid with provisions of locking including necessary specials and fittings for storing potable water and manufactured with material which do not import any taste / odour / any toxic effect and not to contaminate etc.WS-EX-WST-1000 lt(c)1000 litres |
| 20 | SA-IN-NT-PVC) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., |
| 21 | SA-IN-WB-P) Supplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm with all accessories such as powder coated cast iron brackets, 32mm dia C.P. waste coupling, Rubber plug and aluminium chain, 32mm dia B class G.I. / PVC waste pipe, Angle Valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap & required grating etc.,SA-IN-WB-WWOPb).White without pedastal wash hand basin |
| 22 | SA-IN-SS-S) Supply, delivery and fixing of Stainless steel sink following size using 32mm dia ‘B’ class G.I. waste water pipe and 32 mm dia C.P. waste coupling (sample should be got approved from the Executive Engineer before use) true to spirit level including finishing neatly, and fixing in position complying with relevant standard specifications etc., SA-IN-SS-600 x 600 x 200c) 600mm x 600mm x 200mm |
| 23 | Supply & Fixing of WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms /Cub.Mt. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member. Supply & Fixing of 25mm (+/- 1mm) thick Qute WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain mat finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is suggested to be hinged to the frame with minimum of 5 inch butt hinges of SS make. |
| 24 | SA-IN-GT-KB) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 110 mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cm 1:5 (One of cement and five of crushed stone sand) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag etc. |
| 25 | RE-RTS-Fe-NC) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying etc., |
| 26 | WS-EX-RWD-PVC) Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe with relevant specials such as gratings, shoes, bends, offsets conforming to IS 14735 including jointing with seal ring conforming IS 5382 with leaving a gap about 10mm to allow thermal expansion with necessary clamps, teak wood plugs, etc., of approved quality and including fixing C.I. gratings at the junction of parapet and floor or roof slab etc., including finishing etc.,WS-EX-RWD-PVC 110b. 110mm dia PVC SWR pipe |
| 27 | WS-IN-HCP-LBT)Supplying and fixing of 15mm dia half turn C.P Tap (Long body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, |
| 28 | WS-IN-HCP-SBT) Supplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, |
| 29 | SA-IN-Spl.-Fit) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to ISI specification including cost and labour charges for fixing etc.SA-IN-CP-2WBCa) CP Two Way Bib Cock with Health Faucet |
| 30 | PA-IN-OWP-2C EP) Painting the old wood work with two coats of approved Ist class synthetic enamel paint including thorough scrapping the old paint using sand paper as required by the departmental officers including cost of material, labour for painting, supplying etc., |
| 31 | PA-Ex-OIP-2C EP) Painting the old Iron work and other similar works such as PVC / ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand over the through scrapped surface including scrapping the existing surface the paint should be supplied by the contractor at his own cost |
| 32 | PA-CE-WW-SL 2C) White washing Two coat using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., complete in all respects. |
| 33 | PA-CE-WW-SL 3C) White washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete in all respects. |
| 34 | PA-Ex-EEP-2C BPC) Painting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality color and shade in addition to one coat of approved primer paint over cement plastered wall surfaces including cost of Exterior Emulsion paint, putty, brushes, etc., |
| 35 | PA-Ex-PEP-OW W P) Painting old walls two coats with ready mixed plastic emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat through scrapping including cost of necessary brushes, labour charges, patty etc., |
| 36 | PA-Ex-EEP-OW W P) Painting old walls two coats with Exterior emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat through scrapping including cost of necessary brushes, labour charges, patty etc.,, |
| 37 | EL-IN-OEP-OLP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for controlled by 5 amps flush type switch including citcuit mains, cost of all materials, specials, etc., all complete, (Open wiring)EL-IN-OEP-WCRa. Light point with ceiling rose |
| 38 | EL-IN-OEP-WCR) b. Light point without ceiling rose |
| 39 | EL-IN-OEP-SBI) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps. 5 pin plug socket point at Switch Board Itself including circuit mains, cost of all materials, specials, etc., all complete, (Open wiring) |
| 40 | EL-IN-OEP-CP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps. 5 pin plug socket point at convenient places including circuit mains, cost of all materials, specials, etc., all complete, (Open wiring) |
| 41 | EL-IN-OEP-FP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for FAN POINT controlled by 5 amps flush type switch including citcuit mains, cost of all materials, specials, etc., all complete, (Open wiring) |
| 42 | EL-IN-EP-PS) Supplying and fixing 15amps 3 pin plug type socket on a suitable size PVC box (Fire retraded box) of required thickness concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials. |
| 43 | EL-IN-EF-F) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades with dimmer electronic regulator suitable for operation on 230 volts 50 HTZ single phase AC supply conforming to ISS No.374/2019 and provided with insulation . (The brand should be got approved from the Executive Engineer before supply made).EL-IN-EF-48\\"Fa) 48\\" Electric fan 1200mm sweep |
| 44 | EL-IN-EF-AC) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan) |
| 45 | EL-IN-LED.F-TL) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark including cost of all materials twin core flex wire, TW round block and labour charges for fixing in position etc., all complete and as directed by the departmental officers (The material should be got approved from the Executive Engineer before use). |
| 46 | EL-IN-LED.F-LB) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use)EL-IN-EF-9Wa) 9 watts LED bulb |
| 47 | EL-EX-EF-SL) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode) lower end lamp with heavy gauge aluminium sheet fabricated canopy treated primered and painted with stove enameled CRCA sheet steel contact gear cum reflector tray duly finished glossy white for optimum reflection with clear ribbed acrylic bowl fixed to aluminium frame with gasket lining secured to canopy by means of hinges for one side and foggle - catches in the other side for minimum projection against dust and water entry all prewired upto terminal block complete with all accessories such as copper wire, LED, bulb etc.,EL-EX-EF-SL-25W25W LED Street Light Fitting with LED |
| 48 | EL-IN-OWR-2x2.5m2) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. [Open wrining] |
| 49 | EL-IN-OWR-2x1.5m2) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in open wiring 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. [Open wrining] |
| 50 | EL-IN-OWR-2x4m2) Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with surface run by means of 2.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in surface run 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. (Open wiring) |
| 51 | EL-IN-WR-4x6m2) Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm/4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in fully concealed 19mm/20mm/32mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. |
| 52 | EL-IN-EF-TPN) Supply and fixing of follwing Triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection,cost of all materials etc., all complete as directed by the departmental officers. (The quality should be got approved by the Executive Engineer before use).EL-IN-EF-TPN-63ab)63 amps triple pole main switch with fuse and neutral link |
| 53 | EL-IN-EF-FU) Supplying and fixing following porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of all materials etc., all complete.EL-IN-EF-3nosFU3 No's of Fuse UnitEL-IN-EF-3-63aFUb)3 nos of 63 amps 500 volts grade porcelain fuse unit |
| 54 | EL-IN-EF-TWP) Supplying and fixing of 1 no of following thick TW plank varnished with 1 no of 25 amps 250 volts fuse unit and 1 no copper earth plate of suitable size bolts and nuts on wall for EB service connections including cost of all materials etc., all complete (Single phase service connection)EL-IN-EF-TW P-450x300x20b)1 no of 450x300x20mm thick TW plank |
| 55 | EL-IN-EF-ELCB) Supplying and fixing single phase 40 amps Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/ RCCB) 30 milli Amps Double pole (MCB and ELCB/RCCB should be of same manufacture). (Fixed in the existing Board) etc., |
| 56 | EL-IN-EF-ES) Providing Earthing Station using Pipe electrode as per IS 3043 using 2.1 m of 38 mm dia and 0.15 m of 19 mm dia B Class. GI pipe including earthwork excavation, brickwork in cement mortar, plastering, 38 mm trench RCC cover for the brick masonry, 19 mm GI Check nuts, bolts, washers, GI bend, reducer, coupling, funnel with wire mesh of 12.5 mm dia, copper plate 125 mm x 50 mm x 6 mm ( 0.36 kg ), including 1 bag ( 40 kgs ) charcoal, salt 10 kg including cost of all materials and labour,etc |
| 57 | Supply and fixing of vertical TPN 4 way 3 phase MCB distribution board in sheet steel enclosure double door type IP43, as per IS 8623 III: Impact resistance IK09: Frame MCCB Incomer & single phase / three phase MCB's as outgoing (4 way, MCCB + 12 Modules) 1 No. 63A / 100A 3 Pole MCCB as incoming, 2 Nos. 63 Amps TP MCB and 6 Nos. 40 Amps SP MCB as outgoing with bus bar and double door arrangements in flush with wall / on surface and making good of the concealed portion with earth connection etc., all complete. |
| 58 | EL-V DB-4w MCB-63A,OW) Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P ELCB as incoming and 1 No. of 63A TP MCB 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. |
| 59 | EL-SPN-12wMCB-32A,OW) Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only |
| 60 | EL-EX-LTUG-S&D) Supplying and delivery of following PVC aluminium armoured LTUG cable (PVC aluminium armoured LTUG 1100v grade) with isi mark including cost of cable and conveying to the site of work etc., all complete and as directed by the departmental officers. [the brand and quality of the UG cable should be got approved from the executive engineer before use]. EL-EX-LTUG-S&D-3.5C50h). 3.5 core 50 sq.mm. |
| 61 | EL-EX-LTUG-BG) Supplying and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15m layer of sand and covering the cable completely with bricks and sand refilling the earth including cost of all materials and labour charges all complete complying with relevant standard specifications and as directed by the departmental officers (The brand and quality of the cable shall be got approved by the Executive Engineer before use). Below Ground Level.EL-EX-LTUG-BG-3.5C50h). 3.5 core 50 sq.mm. |
| 62 | EL-EX-LTUG-AG) Supplying and clamping of following PVC armoured LTUG cable on post or wall and ceiling with necessary MS Clamps, Brass screws, T.W. Plugs, etc all complete as per relevant standard specification and as directed by the departmental officers. (above GL)EL-EX-LTUG-AG-3.5C50h). 3.5 core 50 sq.mm. |
| 63 | EL-EX-ET-S&D) Supplying and delevery cable end termination of following PVC LTUG Aluminium armoured cable with necessary aiuminium cable sockets by crimping etc.EL-EX-ET-S&D-3.5C50h). 3.5 core 50 sq.mm. |
| 64 | EL-EX-Br CG-S&F) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete as per relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from the EE before use)EL-EX-Br CG-S&F-3.5C50h). 3.5 core 50 sq.mm. |
| 65 | EL-IN-EF-8 SWG) Supplying and laying of 8SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc... including cost of all materials etc.. all complete. |
| 66 | EL-IN-EF-EF) Supplying and fixing of following dia sweep AC exhaust fan of approved ISI Quality including necessary wall opening, fixing and finishing the wall opening and making good including cost of materials, labour for fixing, chipping and redoing necessary inter connection, scaffolding, hire charges for tools and plants etc., .EL-IN-EF-EF300b) 300 mm dia sweep AC exhaust fan |
| 67 | DW-B/S-CMW-U3) Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Brick / Stone Masonry in cement mortar walls under 3m high including all tools and plants required etc. |
| 68 | Desegregation of dismantling the existing flooring Concrete and brick masonry walls in Cement Mortar and Clearing debries away from site and neat stacking etc complete and as directed by the departmental officers. |
| 69 | Supplying and delivery of Fan Down rod etc., all complete and as directed by the departmental officers (The material should be got approved from the Executive Engineer before use) |
| 70 | Pointing the RR masonry with Cement Mortar 1:5 with Admixture including cost of all materials and labour charges for pointing, curing etc.,all completed and as directed by the departmental officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender