Tender For Rehabilitation Of Drainage & Inspection Chambers To The Existing 2 Nos. Of Dsp, 4 Nos. Of Si And 88 Nos. Of Pc/Hc Quarters At Muthuvinayagar Kovil Street, Thiruvannamalai In Thiruvannamalai District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Nov 2026
10 days left
EMD
34100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rehabilitation Of Drainage & Inspection Chambers To The Existing 2 Nos. Of Dsp, 4 Nos. Of Si And 88 Nos. Of Pc/Hc Quarters At Muthuvinayagar Kovil Street, Thiruvannamalai In Thiruvannamalai District.
BOQ
| Sl. No. | Item Description |
| 1 | DW-B/S-CMW-U3) Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Brick / Stone Masonry in cement mortar walls under 3m high including all tools and plants required etc. all complete as per relevant standard specifications and as directed by the departmental officers. |
| 2 | EW-AS-OC-ER) Earth work excavation for Open Foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary. (Excluding refilling the sides of foundation) and depositing the earth in places shown clearing and levelling the site with an initial lead of 10 metres and lift as specified hereunder etc., complete in all respects complying with relevant Standard specifications (Excluding Refilling).EW-AS-OC-ER-2m) a) 0 to 2m depth. |
| 3 | FL-FB-HBSJ-40mm) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials, labour charges, etc., all complete and as directedby the departmental officers. |
| 4 | FL-FB-HBSJ-20mm) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials, Labour charges etc., all complete and as directed by the departmental officers. |
| 5 | FL-FB-SCS) supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specification including cost of supplying filling crushed stone sand. |
| 6 | CN-FB-PCC-1:5:10) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. |
| 7 | CN-FB-PCC-1:2:4) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly excluding shuttering and centering but including laying, curing and finishing with relevant standard specifications in foundation and basement, and other similar works & as directed by the departmental officers. |
| 8 | CN-FB-PCC-1:8:16) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., complete in all respects complying with relevant standard specifications and as directed by the Departmental officers. |
| 9 | BW-FB-KB-CM 1:5) Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete with relevant standard specifications. |
| 10 | BW-PW 110mm-KB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Kiln burnt country bricks of size 8¾”x4¼x2¾” (22x11x7cm) including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings.BW-PW 110mm - FB-KB-CM 1:4) a. In Foundation and basement |
| 11 | CN-F&S-RCC-M20) Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cum) 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum) 5156 Kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670Kg of crushed stone sand (for making 10 cum) but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc., CN-FB-RCC-M20)a. In Foundation and basement |
| 12 | PL-FL-CM 1:4-20mm) Plastering the top of flooring in cm 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including surface rendered smooth including providing proper slopes, thread lining, curing and 150mm wide skirting alround with the same cement mortar etc., complete in all respects. |
| 13 | PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding, etc., complete in all respects and complying with relevant standard specifications. |
| 14 | PL-IN-CM 1:4-12mm) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement including providing band cornice, ceiling cornice, curing, scaffolding etc., complete in all respects and complying with standard specifications. |
| 15 | RE-RTS-Fe-NC) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying etc., all complete and as directed by the departmental officers. |
| 16 | FL-FB-GR) Supplying and filling in foundation and basement with gravel in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specifications including cost of supplying gravel and as directed by the departmental officers. |
| 17 | FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfaces as detailed below with all cross bracings using mild steel sheets of size 90cm x 60cm and MS 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak or country wood joists of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13cm dia spaced at 75cm intervals and removing the same after a specified period without damaging the R.C.C works etc., complete complying with standard specifaction and as directed by the departmental officers.FW-FB-WOS-FB) a. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 18 | FW-SS-WS-VW) d.For vertical walls |
| 19 | TL-FL-CT-CM 1:3) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc., all complete and as directed by the departmental officers. (The brand quality of tiles should be got approved from Executive Engineer before use). |
| 20 | TL-WL-GZT-CM 1:2) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), including curing, finishing etc., all complete and as directed by the departmental officers. (The brand quality of tiles should be got approved from Executive Engineer before use) |
| 21 | WS-EX-RWD-PVC) Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe with relevant specials such as gratings, shoes, bends, offsets conforming to IS 14735 including jointing with seal ring conforming IS 5382 with leaving a gap about 10mm to allow thermal expansion with necessary clamps, teak wood plugs, etc., of approved quality and including fixing C.I. gratings at the junction of parapet and floor or roof slab etc., including finishing etc., complete complying with relevant standard specifications. (The quality and brand of fittings should be got approved from Executive Engineer before use).WS-EX-RWD-PVC 110) b. 110mm dia PVC SWR pipe |
| 22 | SA-Ex-SWR P-Dia) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary UPVC special clamps, wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the departmental officers.SA-Ex-SWR P-110)a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 23 | SA-Ex-SWR P-75)b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 24 | WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/UPVC/GI specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., fixing on wall to the proper gradient and alignment and redoing the chipped of masonry etc., as directed by the departmental officers.WS-EX-ASTM-32 PVC)a) 32mm dia |
| 25 | WS-EX-ASTM-25 PVC)b) 25mm dia |
| 26 | SA-Ex-SN8-Dia) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003, superior variety and tested with water, including necessary earth work excavation for trenches and refilling the same, well rammed and consolidated after the pipes are jointed and laid to proper gradiant to the alignment as directed by the departmental officers. (SN8 SDR 34 (S16.5), as per IS 15328/2003, should be got approved by the EE/SE/CE before use in works)SA-Ex-SN8-110)a. 110 mm UPVC Non Pressure pipe |
| 27 | SA-Ex-SN8-160)b. 160 mm UPVC Non Pressure pipe |
| 28 | SA-Ex-SFRC-S) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty with 10 Ton capacity including of all cost etc., all completed and as directed by the departmental officers.SA-Ex-SFRC-600 x 600) b. 600mm x 600 mm |
| 29 | CN-FPS-1:3:6-50mm) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) with secondary reinforcement fibre of approved quality at 0.25% by weight of cement (125gm of fibre for 1 bag i.e., 50Kg of cement) used including cost of all materials, moulding, curing, transportation, laying, pointing etc., for approach road,pavement slab and other similar works etc., complete as per the relevant standard specifications and as directed by the departmental officers. (The shape of slab and brand and quality of fibre should be got approved from the Executive Engineer before use) |
| 30 | SA-IN-GT-KB) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 110 mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cm 1:5 (One of cement and five of crushed stone sand) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete and as directed by the departmental officers. |
| 31 | WS-IN/EX-P-Dia) Supplying and delivery of following dia pipe including cost of all materials of best approved superior quality with isi mark etc all complete and as directed by the departmental officers. (the pipe should be got approved from the executive engineer before use)WS-IN/EX-GI-100) i. 100mm dia GI Pipe |
| 32 | WS-IN/EX-Spl PVC / UPVC / CPVC / GI / CI / GM / MS / SS-Dia) Supply and fixing of following dia PVC / UPVC / CPVC / GI / CI / GM / MS / SS Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer (The brand and quality of the Specials should be got approved from EE before use)WS-IN/EX-GM GV-GV)21.Gun Metal Gate Valve.WS-IN/EX-GM GV-25) c. 25 mm Dia Gun Metal Gate Valve |
| 33 | WS-IN/EX-GM GV-32) d. 32 mm Dia Gun Metal Gate Valve |
| 34 | WS-IN/EX-UPVC Cu-25) e. 25 mm Dia UPVC Coupling |
| 35 | WS-IN/EX-UPVC Cu-32) d. 32 mm Dia UPVC Coupling |
| 36 | WS-IN/EX-GI HN-32) f. 32 mm Dia GI Hex Nipple |
| 37 | WS-IN/EX-GI HN-25) g. 25 mm Dia GI Hex Nipple |
| 38 | SA-IN-IWC-GF) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap, including concrete packing, filling portion with earth, flooring the area with 75mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of curshed stone sand and sixteen of brick jelly) using 40mm size brick jelly and top left rough to receive the floor plastering but including Mortar Plasticizer (Liquid) at 200ml per bag, anti-syphonage connection, curing, etc. all complete and as directed by the departmental officers. In Ground floor. |
| 39 | SA-IN-EWC-W) Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap including cost and fixing of double flapped coloured plastic sheet cover PVC flushing cistern in appropriate level as directed by the departmental officers at a maximum level of 5’6” and of approved brand of 10litres capacity including fittings such as CI brackets. PVC connection GM wheel valve, Hex nipple, etc., complete (Th Quality and brand of EWC and plastic cover shall be got approved from the Executive Engineer before fixing) |
| 40 | WS-EX-WST-HDPE) Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) of approved brand (superior variety) with ISI Mark (marked with tank itself) with top lid with provisions of locking including necessary specials and fittings for storing potable water and manufactured with material which do not import any taste / odour / any toxic effect and not to contaminate etc. with carbon block content and dispersion in accordance with relevant I.S. specification and as directed by the departmental officers etc. complete. (The tank should be got approved from the E.E. before use)WS-EX-WST-700 lt) (a) 700 litres |
| 41 | EL-EX-LTUG-S&D)Supplying and delivery of following PVC aluminium armoured LTUG cable (PVC aluminium armoured LTUG 1100v grade) with isi mark including cost of cable and conveying to the site of work etc., all complete and as directed by the departmental officers. [the brand and quality of the UG cable should be got approved from the executive engineer before use].EL-EX-LTUG-S&D-3.5C25) f). 3.5 core 25 sq.mm. |
| 42 | EL-EX-LC-AG)Labour charges for laying of PVC aluminium armoured LTUG cable / flat cable on post and wall to make good etc., all complete complying with relevant standard specifications and as directed by the departmental officers. Above Ground level |
| 43 | Sectioning, Levelling, Removing the bushes with JCB using hire basis and clearing the debris away from the site including all cost etc., all complete and as directed by the departmental officers. |
| 44 | PA-Ex-EEP-OW W P) Painting old walls two coats with Exterior emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat through scrapping including cost of necessary brushes, labour charges, patty etc., all complete as directed by the departmental officers (Paints and its shade should be got approved from the Executive Engineer before using) |
| 45 | WS-Ex-BWSM-TP) Supply and delivery of clear water vertical wet type (Three Phase) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 without panel board as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes.The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % etc. complete complying with relevant standard specifications and as directed by the departmental officers. (The quality and brand should be got approved from the Executive Engineer before use)WS-Ex-BWSM-50 x 75)50 lpm x 75 m |
| 46 | WS-Ex-LC-S BW/OW) Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 47 | Dampness rectification in existing Bath and WC area by Epoxy pointing to the anti skid floor tiles, including the cost of chemical, admixtures and labour charges with leakage test etc., all complete and as directed by the departmental officers. |
| 48 | Cleaning the existing septic tank such as sewage waste and liquid using 5000 litres capacity tank vehicles and disposing the same way from the site including hire and conveyance charges for the vehicle, labours all tools and plants employed there of as directed by the departmental officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender