Tender For Special Repairs To 6Th And 8Th Sluices Of 6A Sub -Distributory Of 6Th Distributory Canal In Melur Taluk In Madurai District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
12 days left
EMD
2000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To 6Th And 8Th Sluices Of 6A Sub -Distributory Of 6Th Distributory Canal In Melur Taluk In Madurai District.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavating and depositing on bank with initial lead of 10m & initial lif of 2m in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil sandy loam and ordinary soil including excavated earth (SS20B) |
| 2 | Earth Work excavation For foundation and depositing on bank with initial lead of 10m & initial lift 2m in hard stiff clay stiff black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulders SS.20.B |
| 3 | Supplying and filling with M-sand of each layer not more than 15 cm thick including consolidation etc complete and as per the technical specifications directed by the Engineer in charge of the works For sluices, weirs sand retainig wall etc., complete complying with standard specification and as directed by the Departmental Officers. |
| 4 | Random rubble masonry using new rough stone and bond stones in cement mortar 1:4 (One cement and four sand by volume) for foundation and basement including simultaneous pointing and all incidental charges such as scaffolding, curing, finishing etc., complete complying with specification and as directed by the departmental officers at site. |
| 5 | Supplying , Laying and fixing in position of R.C.C. Hume pipes of NP3 class of 300mm Dia with suitable collars including labour charges and jointing materials etc., complete complying with standard specification and as directed by the departmental officers complying with standard specification and as directed by the departmental officers |
| 6 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete. |
| 7 | Fabricating, supplying and fixing of 50mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc., complete. |
| 8 | Supplying and fixing of Head Set Assembly light duty with hexagonal nut (Approximate 50 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assemblyto the work site. Fixing the head set assembly to the top beam by usingrequired rust fre bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at sectio store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours charges for wooden pattern, moulding and charges for labours and materials and warranty for 5 years etc.., |
| 9 | Gst 18% |
| 10 | Sub Total Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender