Tender For Renovation Of 11 Nos. Class Iii Flats At Rbi Staff Quarters, Gandhinagar, Jaipur
Tender Value
48.15 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
7 days left
EMD
96300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Of 11 Nos. Class Iii Flats At Rbi Staff Quarters, Gandhinagar, Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | 1. Carefully dismantling and removing of existing mosaic flooring/ Kota stone / ceramic tile or any other flooring / skirting, sunken fillings such as cinder filling / brick bat coba / dado, etc. from kitchen, bathroom, toilet or wherever required including disposing off debris out of Bank's premises at approved dumping ground of local administration, including all lead and lift etc. all complete as directed by Bank’s Engineer. Note:- This item will be operated in kitchen, bathrooms, wash basin area and toilets.a) Carefully dismantling of toilet, wash basin area and bathroom (approximate area = 4.6 Sqm.) b) Carefully dismantling all plumbing & sanitary fittings. Sink with brackets, looking mirror, geyser, water purifier, G.I. pipe line, existing flushing cistern including flush pipe, brackets, W.C. seat, wash basin with brackets, C.P./ Brass fittings, etc. from one flat.c) Dismantling of skirting : Carefully dismantling all the existing tile/stone skirting with backing mortar in the flat and balcony. d) Dismantling of kitchen (approximate area = 6.8 Sqm.) : Carefully dismantling the existing kitchen platform along with all attached masonry work. Work includes disposal of debris out of Bank premises, considering the salvage value of dismantaled material, making good the damages with cement mortar 1:4 (1 cement : 4 sand) or plain cement concrete 1:2:4 (1 cement : 2 sand : 4 stone chips 20 mm. nominal sie) as directed by Bank's Engineer. |
| 2 | 2. Providing and constructing half brick wall in cement mortar 1:4 ( 1 Cement : 4 coarse sand) at all levels, using best quality locally available bricks including providing key with adjoining stone/brick masonry wall, as per site requirement including racking out joints, curing etc., all complete as directed by Bank's Engineer. |
| 3 | 3. Providing and applying plain cement plaster in 15mm thick in cement mortar 1:4 (1 cement: 4 coarse sand) or level to be match with surrounding area including scaffolding, curing, etc. all complete as directed by Bank’s Engineer. |
| 4 | 4. Providing and applying polymer based two compound water proofing treatment to the sunken portion of the toilets, etc. by using products of M/s. Pidilite, M/s. Fosroc, M/s. Sika, M/s. BASF or any other equivalent in the following steps:-a) Thoroughly cleaning of all surfaces of sunken portions to be treated.b) Grouting and injecting polymer cement slurry as per manufacturer’s specifications into the R.C.C. members till its refusal.c) Repairing the damaged portions of the R.C.C. members with polymer concrete / mortar as per manufacturer’s specifications.d) Providing and applying 20 mm. thick water proofing cement plaster 1:4 (I cement: 4 coarse sand) mixed with water proofing compound as per manufacturer’s specifications to the sunken floor and sides including rounding off junctions / corners with water proofing cement mortar, etc. all complete.e) Providing and applying a coat of polymer water proofing primer and two coats of two compound based water proofing polymer/ chemical of M/s. Pidilite, M/s. Fosroc, M/s. Sika, M/s. BASF or any other equivalent approved make as per manufacturer’s specifications to the sunken floor, sides, etc.; testing the treated surface by ponding method for 72 hours.f) Repeat the treatment till no seepage is observed on the treated surface.g) Providing and laying 15 mm. thick protective layer of plain cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) over the treated surface. Work also includes making through hole across the stone masonry wall of 200 mm. to 450 mm. thick up of required size for embedding G.I. pipe of 15 mm. diameter in stone masnry for draing out the seepage leakage water, if any, and filling with cement mortar 1:2 (1 cement : 2 coarse sand) including supplying G.I. pipe of 200 mm. to 450 mm. length. Note:- Single measurement of the sunken floor and its sides shall only be considered for payment for all sub items of work. |
| 5 | 5. Providing and laying brick bat coba to the sunken floors using best quality locally available well burnt sliced bricks in cement mortar 1 : 4 ( I cement : 4 coarse sand ) mixed with water proofing compound of approved make as per manufacturer's specifications, roughening the top layer of cement mortar / top surface of sunk filling with broom to receive the flooring, etc. all complete as directed by Bank's Engineer.Note:- No deduction for squatting / w.c.pan, C.I. pipes, etc. will be made for measurement purpose. |
| 6 | 6. Providing and laying R.C.C. 1:1 ½ :3 (1 cement : 1½ coarse sand : 3 aggregate) for lintel, shelves, platform, slab etc. excluding reinforcements but including compaction, centering, shuttering, curing, finishing, cutting pockets in walls/slab to provide necessary bearing at all height and level, etc. complete all as directed by Bank`s Engineer. |
| 7 | 7. Supplying, straightening, cutting, bending, placing in position and binding & tieing with binding wire TMT steel bar grade Fe415 of approved manufacturer in required diameter including cost of 16 SWG binding wire etc. complete all as directed by the Bank`s Engineer. |
| 8 | 8. Providing, fixing, jointing and testing first quality floor mounted white vitreous chinaware European W. C. pan, and P.V.C. Low level flushing cistern with dual system of Hindware, Parryware, Jaquar or any other equivalent approved make including jointing properly with hessian soaked in cement slurry and applying a thick layer approved quality sealant to the joints, providing and fixing approved heavy quality white P.V.C. seat cover of the same make, etc. The rate shall include for fixing arrangement, P.V.C. flush pipe, P.V.C. connection, all complete with all labour, material, T&P, etc. all complete as directed by Bank’s Engineer. Note:-The basic price of E.W.C. Pan including P.V.C. seat cover, and P.V.C. Low level flushing cistern with dual system is Rs. 4,000/- each including GST. |
| 9 | 9. Providing & fixing first quality white vitreous chinaware wash basin with padestal of Parryware, Hindware, Jaquar or any other equivalent approved make; including making hole for pillar cock, providing and fixing 32 mm. diameter C. P. brass half thread waste coupling of approved make, P.V.C. connection and 32 mm. diameter heavy approved quality P.V.C. waste pipe, providing and fixing C.I./M.S. brackets with cement concrete, painting of brackets with a coat of metal primer and two or more coats of first quality synthetic enamel paint., etc. all complete with all labour, material, T&P, all complete as directed by Bank’s Engineer.Note:- The basic price of Wash Basin including C.P. brass waste coupling and padestal is Rs. 2,900/- each including GST. |
| 10 | 10. Providing and fixing stainless steel kitchen sink with drain board of 1040 mm. X 510 mm. X 215 mm. sink of Nirali, Diamond or any other equivalent approved size, make and quality (preferably glossy) including strainer, coupling, heavy quality P.V.C. waste pipe of suitable length (approximately 600 mm.) etc. all complete as directed by Bank’s Engineer.Note:- Basic rate for a complete set of sink with grating and coupling is Rs. 7,000/- per unit including GST. |
| 11 | 11. Supplying and laying 300 mm. X 300 mm. ceramic non-skid tiles of approved make and shade, finish in flooring, laid to desired level, slope and pattern, on 20 mm. thick cement mortar 1:4 (1 cement: 4 coarse sand) bedding set in cement slurry, jointing neatly with white cement mixed with matching pigment, cleaning, curing, etc. all complete as directed by Bank's Engineer. Note:- The basic price of tiles is Rs. 400/- each including GST. |
| 12 | 12. Providing and laying 300 x 450 m.m. size approved 1st quality ceramic tiles of approved make, size and finish in dado work in kitchen, toilets, bathrooms & wash basin area laid on average 15 mm. thick cement mortar 1:3 (1cement: 3 coarse sand) bedding set in cement slurry including jointing with polymer cement grout of matching shade or white cement slurry mixed with polymer and matching pigment, cleaning, curing, making good the damages with cement mortar, cleaning, etc. all complete as directed by Bank’s Engineer. Note:- The basic price of tiles is Rs. 400/- each including GST.Note:- 1. Exposed area shall only be measured and paid for. 2. No extra payment will be made for removing and re-fixing of window shutters and beading, if so required, for proper completion of the work. |
| 13 | 13. Providing and laying approved quality Double charges vitrified tiles of approved size of approved manufacture make and shade in flooring in required design and pattern on the existing flooring with approved quality cement based high polymer modified quick set tile adhesive (water based) in average 6 mm. thickness, filling the joints with polymer cement grout or white cement slurry mixed with polymer and matching pigment, cleaning, curing, etc. The rate shall include for additional thickness of tile fixing adhesive, if so required to maintain proper floor level/slope and the cost of preparation of surface by making of deep grooves by machine, hacking of surface to receive the flooring, cleaning; disposal of debris out of Bank’s premises, including all lead and lift etc. all complete as directed by the Bank’s Engineer. Note:- The basic price of tiles is Rs. 450/- each including GST.Note:- 1. This item will be operated in bed rooms, living room, kitchen & passage, etc.2. Exposed plan area shall only be measured and paid for. |
| 14 | 14. Providing and fixing approximately 150 mm. high, vitrified tiles of approved make in skirting (tiles cut from approved size) wherever required; in all colours, design and pattern; laid on 12 mm. average thick cement mortar 1:3 (1 cement: 3 coarse sand) backing, grouting joints with polymer cement grout or white cement slurry mixed with polymer and matching pigment, cleaning, curing, etc. The rate shall include for cleaning, disposal of debris out of Bank’s premises, etc. all complete as directed by Bank’s Engineer. Note:- The basic price of tiles is Rs. 450/- each including GST.Note:- 1. This item will be operated in bed rooms, living room & passage, etc.2. Exposed area of vitrified tile skirting shall only be measured and paid for. |
| 15 | 15. Providing and laying 10 mm. thick acid and/or alkali tiles of approved make and shade, finish in flooring & skirting in required disign and pattern on the existing flooring, laid to desired level, slope and pattern, on 10 mm. thick cement mortar 1:4 (1 cement: 4 coarse sand) bedding set in cement slurry, jointing neatly with white cement mixed with matching pigment. The rate shall include cleaning, curing, the cost of preparation of surface by making of deep grooves by machine, hacking of surface to receive the flooring, disposal of debris out of Bank’s premises, including all lead and lift, etc. all complete as directed by Bank's Engineer. Note:- 1. This item will be operated in balcony.2. Exposed plan area shall only be measured and paid for. |
| 16 | 16. Providing and fixing 15-16 m.m. thick premium quality Zed Black in single piece for straight length ( maximum up to 3.00 mtr.), gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms with Vertical sandwich two Kotastone 25 mm support and similar locations of required size, approved shade, colour and texture laid over 20 m.m. thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, making necessary holes for LPG hose etc. complete at all levels. The rate should be inclusive of providing opening and fixing granite stone, over and above corresponding basic item, in facia and drops of width upto 150 m.m. with epoxy resin based adhesive, including cleaning etc. Note:- 1. This item will be operated in kitchen.2. Only plan surface area will be measured no extra payment will be made for making opening3. The basic rate is Rs. 2,500/- per Sqm. including GST. |
| 17 | 17. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 20 m.m. nomial dia in Concealed work/ external work ( SDR -11) including cutting chases and making good the walls etc, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 18 | 18. Providing and fixing 75 m.m. dia. C.I. pipe of approved make for soil waste and vent pipe line including fittings such as tee bend, Y junction conforming to IS 3989 with lead/cement joint (heavy quality) including embedded in PCC horizontal length in floor. Note:- Length of pipe including fittings will be measured in running metre for payment. |
| 19 | 19. Providing and fixing 100 m.m. dia. C.I. pipe of approved make for soil waste and vent pipe line including fittings such as tee bend, Y junction conforming to IS 3989 with lead/cement joint (heavy quality) including embedded in PCC horizontal length in floor. Note:- Length of pipe including fittings will be measured in running metre for payment. |
| 20 | 20. Providing and fixing trap of self cleaning design without vent arm complete, including cost of cutting and making good the walls and floors: 100 m.m. inlet and 75 m.m. outlet, sand cast iron S&S as per IS 3989. |
| 21 | 21. (a) Providing, fixing and testing following C.P. brass bath room and other fittings of approved quality with flange wherever applicable, etc. all complete as directed by Bank’s Engineer.Bib cock with nozzle Note:- Basic rate of Bib cock with nozzle is Rs. 920each including GST. |
| 22 | 21. (b) Same as item 21 (a) above but for-Angular stop cock with wall flangeNote:- Basic rate of Angular stop cock is Rs. 940 each including GST. |
| 23 | 21. (c) Same as item 21 (a) above but for-Wash basin mixerNote:- Basic rate of Pillar cock is Rs. 2,775.00 each including GST. |
| 24 | 21. (d) Same as item 21 (a) above but for-Regular body of Concealed stop cock and Exposed part kit of concealed stop cock with fitting sleeve, operating lever & adjustable wall flange Note:- Basic rate of Regular body of Concealed stop cock and Exposed part kit of concealed stop cock with fitting sleeve, operating lever & adjustable wall flange is Rs. 1,275.00 each including GST. |
| 25 | 21. (e) Same as item 21 (a) above but for-Bath room Wall mixer with provision for overhead showerNote:- Basic rate of Wall mixer with provision for overhead shower with 115 mm. long bend pipe on upper side, connecting legs & wall flanges is Rs. 4,987.50 each including GST. |
| 26 | 21. (f) Same as item 21 (a) above but for-Shower arm casted 190 mm. long flat shape for wall mounted showers with flange Note:- Basic rate of Shower arm casted 190 mm. long flat shape for wall mounted showers with flange is Rs. 825.00 each including GST. |
| 27 | 21. (g) Same as item 21 (a) above but for-Overhead shower Single Flow 100 mm. diameter (ABS CP) Note:- Basic rate of Overhead shower Single Flow 100 mm. diameter (ABS CP) is Rs. 1,162.50 each including GST. |
| 28 | 21. (h) Same as item 21 (a) above but for-Hand shower (health faucet) with 8 mm. diameter, 1.20 mt. long flexible tube & wall hookNote:- Basic rate of Hand shower (health faucet) with 8 mm. diameter, 1.20 mt. long flexible tube & wall hook is Rs. 1,293.75 each including GST. |
| 29 | 21. (i) Same as item 21 (a) above but for-Sink mixer with regular swinging spout (wall mounted model) with connecting legs & wall flanges Note:- Basic rate of Sink mixer with regular swinging spout (wall mounted model) with connecting legs & wall flanges is Rs. 2,887.50 each including GST. |
| 30 | 21. (j) Same as item 21 (a) above but for-2 Way bib cock with wall flange Note:- Basic rate of 2 Way bib cock with wall flange is Rs. 1,762.50 each including GST. |
| 31 | 22. (a) Providing, fixing and testing following bath room and other fittings of approved quality with flange wherever applicable, etc. all complete as directed by Bank’s Engineer.Single towel rail 600 m.m. long, Stainless Steel Note:- Basic rate of Single towel rail 600 m.m. long, Stainless Steel is Rs. 1,068.75 each including GST. |
| 32 | 22. (b) Same as item 22 (a) above but for-Towel ringNote:- Basic rate of Towel ring is Rs. 787.50 each including GST. |
| 33 | 22. (c) Same as item 22 (a) above but for-Soap dish holder Note:- Basic rate of Soap dish holder is Rs. 600.00 each including GST. |
| 34 | 22. (d) Same as item 22 (a) above but for-Tumbler holder Note:- Basic rate of Tumbler holder is Rs. 581.25 each including GST. |
| 35 | 22. (e) Same as item 22 (a) above but for-Double coat hook Note:- Basic rate of Double coat hook is Rs. 450.00 each including GST. |
| 36 | 22. (f) Same as item 22 (a) above but for-Glass shelf 600 mm. long Note:- Basic rate of Glass shelf 600 mm. long is Rs. 1,011.50 each including GST. |
| 37 | 22. (g) Same as item 22 (a) above but for-Corner glass shelf (with bracket) Note:- Basic rate of Corner glass shelf (with bracket) is Rs. 1,106.25 each including GST. |
| 38 | 23. Providing and fixing S.S. Jali of 100 mm dia with or without waste pipe hole as per directions of Engineer-in-Charge. |
| 39 | 24. Providing and fixing 5.00 m.m. thick bevelled edge mirror of superior glass (of approved quality) complete with 6.00 m.m. thick hard board backing fixed to wall with S.S./C.P. brass screws and washers and covered with studs complete, etc. all complete as directed by Bank's Engineer. |
| 40 | 25. Providing and fixing PVC moulded/ready made bath cabinet with attached mirrror and shelves of approved make & model of size 300 mm X 400 mm., etc. all complete as directed by Bank's Engineer. |
| 41 | 26. Removing and refixing all the doors of wooden and Mild Steel (M.S.) of all types, design and dimension from each flats (No. of wooden door - 07 and no. of M.S. door in Balcony - 01) including cutting, surface preparation and resizing to fit in the door frame after floor tile fixing. The work include removing the old hinges from all the doors and supplying and fixing (screwing or welding) ISI certified 03 nos. new hinges of size 115 mm. in each door except M.S. door, etc. all complete as directed by Bank's Engineer. Note:- Rate to be quoted for work of above descriptrion in each flat for all the doors. |
| 42 | 27. Existing Wooden Cupboard cover- Providing and fixing in position three side wooden cover over the existing masonry Cupboard of required size with front shutter and frame. All frame, panels, covers, shutters made of 19 m.m. thick Marine Grade grade Plywood Conforming to IS 710 of approved make with 1.00 m.m. thick decorative laminate of approved make, texture and shade on exposed sides of cupboard shutters and 0.8 m.m. thick balancing laminate shall be fixed on all unexposed and inner faces of cabinet and shutters with stainless steel piano hinges all along the edge of shutter. Work also includes providing and fixing side panelling on both the sides of the existing masonry cupboard from top to bottom edges to be finished with 2nd class teak wood lipping of 19 X 5 m.m. painted with synthetic enamel paint complete as per site condition as directed by the Engineer-In-Charge. Note:- Only front and side elevation area shall be measured in Sqm. for payment. |
| 43 | 28. S.S. Electric Chimney :Supply, installation, testing and commissioning of stainless steel 600mm wide electric chimney of approved make / model with suction capacity 1000 cum/ hour (Faber Cleo-LTW ,Kaif or any other approved equivalent make) with cowl, 150mm diameter 4 kg/sqcm pressure PVC exhaust pipe with 10mm thick water proof ply boxing with 0.8mm thick stainless steel finish approved quality lamination. The rate shall include for making hole for exhaust pipe in the stone masonry wall, finishing the same with the cement mortar,removal of debris, etc. all complete as directed by the Engineer-in-Charge. Note:1. Basic rate for electric chimney is Rs.9,500/- per unit |
| 44 | 29. Providing and fixing Modular Trolly/Basket cabinet below kitchen platform to be fabricated/assembled with waterproof WPC board (Wood polymer composite board) of approved make for makinng required sizes of trolly/basket cabinets below kitchen platform to accomodate various SS trolly units of modular kitchen, SS sink, etc. & fixed with necessary fittings, screws, nails, pasting materials, finishing all exposed cut surfaces with self adhesive PVC tape of matching shade with to surrounding laminate finish, etc. complete all as directed by the Bank`s Engineer. Note:- Only front elevation area shall be measured in Sqm. for payment. |
| 45 | 30. Stainlees Steel baskets with shutter: Supply and fixing of stainless steel 304 grade baskets of approved make in cabninets & all the stainless steel baskets shall of hettich or any other approved make to be provided with hettich or any other approved make of soft close hinges & soft closing telescopic channel (two for each trolley) of 500mm depth of 45 kg capacity with full extension ball bearing slide of following sizes and type : (a) Cup saucer Basket:- 386 x 500 x 100 |
| 46 | 30. (b) Thali Basket:- 386 x 500 x 200 |
| 47 | 30. (c) Cutlery Basket:- 386 x 500 x 100 |
| 48 | 30. (d) Plain Basket:- 386 x 500 x 200 |
| 49 | 30. (e) Crockery Basket:- 386 x 500 x 100 |
| 50 | 30. (f) plain Basket:- 386 x 500 x 100 |
| 51 | 30. (g) plain with partition Basket:- 386 x 500 x 100 |
| 52 | 30. (h) Detergent holder 450 mm |
| 53 | 30. (i) Gas shutter cylinder trolley 400mm |
| 54 | 30. (j) Bottle pull out with 150 mm wide with 2 shelves of 60 mm depth. |
| 55 | 31. Overhead Kitchen Cabinet Carcass:Providing and fixing in position 300 m.m. deep overhead wooden kitchen cabinets of required size made of 19 m.m. thick factory pressed Marine Grade grade Plywood Conforming to IS 710 of approved make of approved make on top, bottom, sides, back, partitions, shelves, including providing and fixing 1.0 mm thick decorative laminate of approved make, texture and shade on exterior side of the Carcass wherever required and 0.8 mm thick laminate shall be fixed on all unexposed inner faces of cabinet including 2nd class teak wood lipping of size 21 X 5 m.m., all types of screws , fasteners, adhesives, painting of lipping, etc. complete as per design, drawing and site condition as directed by the Engineer-In-Charge. The overhead Carcass have to be fixed at the wall with necessary fixing arrangement.Note:- Only front elevation area shall be measured in Sqm. for payment. |
| 56 | 32. Loft cover- Providing and fixing in position wooden cover over the existing masonry Cupboard & loft of required size with front shutter and frame. All frame, panels, covers, shutters made of 19 m.m. thick Marine Grade grade Plywood Conforming to IS 710 of approved make with 1.00 m.m. thick decorative laminate of approved make, texture and shade on exposed sides of cupboard shutters and 0.8 m.m. thick balancing laminate shall be fixed on all unexposed and inner faces of cabinet and shutters with stainless steel piano hinges all along the edge of shutter. Edges to be finished with 2nd class teak wood lipping of 19 X 5 m.m. painted with synthetic enamel paint. The rate shall also include takingout existing cupboard shutter from position, etc. complete as per site condition as directed by the Engineer-In-Charge. Note:- Only front elevation area shall be measured in Sqm. for payment. |
| 57 | 33. P/F magnetic catcher in cup- board/ward robe shutters: Double strip horizontal type. |
| 58 | 34. P/F chromium plated brass handles of 100 m.m. size in cup- board/ward robe shutters. |
| 59 | 35. Providing and fixing stainless steel soft closing spring hinges instead of SS piano hinges at 0 degree hinges (hydraulic type) of approved make/brand to overhead Kitchen Cabinet Carcass with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 60 | 36. Providing and fixing wooden moulded beading to door and window frames, cupboards, panels with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood: 30 mm. x 15 mm., etc. all complete as directed by Bank’s Engineer. |
| 61 | 37. Providing and fixing wooden moulded beading to door and window frames, cupboards, panels with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood: 30 mm. x 30 mm., etc. all complete as directed by Bank’s Engineer. |
| 62 | 38. Providing and fixing Stainless steel SS grade 304, curtain rod 25 mm dia 1.20 m.m. thick with decorative side/end Stainless steel SS grade 304, brackets ( curtain rod) 25 m.m. dia 1.20 m.m. thick, S.S. screws and wooden plugs, etc., wherever necessary complete and as per the sample as approved by the Engineer-in-charge. |
| 63 | 39. Removing/scraping/cleaning the existing wall surface, prepare even surface by using putty up to required level. Providing and applying a base coat of Interior cement primer of approved manufacture and two or more coats of Oil bound distemper of approved make and shade as per the manufacturers specifications to the interior surfaces of walls, ceilings, beams, columns, canopies, etc. The rate shall include for scaffolding, properly cleaning of the site after completion of the aforementioned work. The contractor is strictly advised to take all the safety measure for labour to carry out the work, etc. all completed as directed by Bank’s Engineer. |
| 64 | 40. Scraping/cleaning the existing wooden/steel surface, prepare even surface by using putty up to required level. Providing and applying two or more coats of Ist quality synthetic enamel paint of approved manufacture and approved shade to wooden surface/commercial board/paneled surfaces/steel surfaces in doors, windows, shelves and grills, etc. as per the manufacturers’ specifications over providing and applying a base coat of wooden/steel primer. The rate shall include for scaffolding, properly cleaning of the site after completion of the work. The contractor is strictly advised to take all the safety measure for labour to carry out the work, etc. all completed as directed by Bank’s Engineer. |
| 65 | 41. Providing and fixing powder coated fixed aluminium window with louvers & opening for exhaust fan (colour/shade as approved by the Bank) for bathroom and WC area of flats with following specifications.Making of complete window in three parts (01 part for fixed frosted glass, 01 part opening for exhaust fan & other part for PVC louvers) (Sample made in other flats) The minor gap between window and masonry surface (3-5 mm.) is to be sealed by weatherproof silicon sealant. Gap between 5-10 mm. should be filled with silicon sealant with backer rod.The work shall include repairing of stone masonry wall before and after fixing the windowApprox. Size of the opening= 550 mm. (L) x 830 mm. (H)Section details of the outer frame = 65 mm. x 38 mm. 18 gauge |
| 66 | 42. Carefully dismantling of existing in-built cupboard and Modification of existing in-built cupboard of approximate size 1060mmX1950mm are as under :- i Provoding & fixing of made of 19mm plywood cupboard shutters with frame with both side 1mm thick lamination of approved shade and make.ii replacement of all inner partitions and made of 19mm plywood with 1mm thick white or off-white lamination of approved shade and all exposed edges finished with self adhisive edge binding tap.iii one number 25mm dia cloth hanger rod of suitable length with wall brackets etc. iv Two number of drawer provision with locking arrangements and fittingsetc. Rates are include of all hardware fittings i.e.three 100mm butt hingesin each shutters , one tower bolts,one megnet catcher in each shutter and one Al-drop for locking arrangement all complete as directed by Bank,s Engineer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender