Public Administrative Department Government Departments Closing in 4 days TDR #58282827

Tender For Providing And Laying Of Di Pipe Line From Janakpur Source No. I To Guest House Water Treatment Plant Under Sd-I, Cd-I, Apwd, Rangat.

Issued by Government Departments · North and Middle Andaman, Andaman And Nicobar Islands
Tender Value
51.35 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
4 days left
EMD
1.02 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing And Laying Of Di Pipe Line From Janakpur Source No. I To Guest House Water Treatment Plant Under Sd-I, Cd-I, Apwd, Rangat.

BOQ

Name of Work:- Providing and laying of DI pipe line from Janakpur Source No. I to Guest House water treatment plant under SD-I, CD-I, APWD, Rangat.
Sl. No. Item Description
1Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
2Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
3Above 40 mm nominal bore
4Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :
5100 mm dia Ductile Iron Class K-9 pipes
6Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket :
7100 mm dia pipes
8Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :
9100 mm diameter pipe
10Supplying pig lead at site of work.
11Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class):
12Up to 300 mm dia
13Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
14100 mm diameterClass I
15Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :
16100 mm dia
17Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
18All kinds of soil.
19Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
201:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)
21Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
221:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
23Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
241:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
25Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
26Thermo-Mechanically Treated bars of grade Fe-500D or more.
27Centering and shuttering including strutting, propping etc. and removal of form for
28Foundations, footings, bases of columns, etc. for mass concrete
29Columns, Pillars, Piers, Abutments, Posts and Struts
3012 mm cement plaster of mix:
311:4(1 cement: 4 fine sand)
32Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif.
33Carriage of materials by head load to work site for an average lead of 1300 mtr and lift of 72 mtr as per the direction of Engineer-in-charge.
34DI pipe
35Pig lead
36CI fittings
37Cement
38Fine/River sand
39Coarse/Pulverised sand
40Stone aggregate below 40mm
41Stone aggregate 40mm and above
42Steel bar Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58282827
AUTHORITY Government Departments
TENDER VALUE 51.35 Lakhs
LAST DATE 04-11-2026
Authority
Authority Name Andaman Public Works Dept
Work Description Tender for Providing And Laying Of Di Pipe Line From Janakpur Source No. I To Guest House Water Treatment Plant Under Sd-I, Cd-I, Apwd, Rangat.
Basic Detail
Tender No 82/DB/CD-I/RGT/2026-27
Bidding Type Tender
Location
City North and Middle Andaman
State Andaman And Nicobar Islands
Key Dates
Publish Date 29 Oct 2026
Submission Date 04 Nov 2026
Open Date 04 Nov 2026
Finance
Tender Value 51.35 Lakhs
Tender Fee Ref. Documents
EMD 1.02 Lakhs
Exemption Not Available
Document List
57ca01e5-5e0c-4db2-8c93-dba36609ebcd.html
BOQ_27018.xls
TenderDocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

57ca01e5-5e0c-4db2-8c93-dba36609ebcd.html

xls

BOQ_27018.xls

pdf

TenderDocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender