Tender For Construction Of Auditorium At Barshi Road Latur Tq. And District Latur.
Tender Value
18.85 Crore
Estimated cost
Bid Submission
06 Nov 2026
3 days left
EMD
9.43 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Latur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Auditorium At Barshi Road Latur Tq. And District Latur.
BOQ
| Sl. No. | Item Description |
| 1 | PART – A (Work Portion) |
| 2 | I) Civil Work Portion |
| 3 | ITEM No. 1 :- Cutting down trees including trunks and branches with girths above 30 centimetre to 60 centimetre and stacking the materials neatly with all lifts and lead of 1000 metre as directed and earth filling in the depression / pit if any. |
| 4 | ITEM No. 2 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre) |
| 5 | ITEM No. 3 :- Excavation for foundation in hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.50 metre) |
| 6 | ITEM No. 4 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts) (Ground Floor) |
| 7 | ITEM No. 5 :- Providing and laying in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, laying / pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) |
| 8 | ITEM No. 6 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts) |
| 9 | ITEM No. 7 :- Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) |
| 10 | ITEM No. 8 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts) (First Floor) |
| 11 | ITEM No. 9 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (First Floor) |
| 12 | ITEM No. 10 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (Ground Floor) |
| 13 | ITEM No. 11 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (First Floor) |
| 14 | ITEM No. 12 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (Ground Floor) |
| 15 | ITEM No. 13 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (First Floor) |
| 16 | ITEM No. 14 :- Providing and laying Cast in situ / Ready Mixcement concrete M-30 of trap/ granite/ quartzite / gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) (Ground Floor) |
| 17 | ITEM No. 15 :- Providing and laying Cast in situ / Ready Mixcement concrete M-30 of trap/ granite/ quartzite / gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) (First Floor) |
| 18 | ITEM No. 16 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) (Ground Floor) |
| 19 | ITEM No. 17 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) (First Floor) |
| 20 | ITEM No. 18 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-30 of trap / quartzite / granite / gneiss metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) (Ground Floor) |
| 21 | ITEM No. 19 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-30 of trap / quartzite / granite / gneiss metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) (First Floor) |
| 22 | ITEM No. 20 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Material including all lead and lifts) (Material including all lead and lifts) (Ground Floor) |
| 23 | ITEM No. 21 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Material including all lead and lifts) (Material including all lead and lifts) (First Floor) |
| 24 | ITEM No. 22 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) (Ground Floor) |
| 25 | ITEM No. 23 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts) (First Floor) |
| 26 | ITEM No. 24 :- Providing and fixing during laying in RCC Slab rectangular 2 millimetre thick Mild steel sheet fan hook box of size 180 X 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Material including all lead and lifts) (Ground Floor) |
| 27 | ITEM No. 25 :- Providing and fixing during laying in RCC Slab rectangular 2 millimetre thick Mild steel sheet fan hook box of size 180 X 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Material including all lead and lifts) (First Floor) |
| 28 | ITEM No. 26 :- Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 29 | ITEM No. 27 :- Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera complete. (Material including all lead and lifts) (First Floor) |
| 30 | ITEM No. 28 :- Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimetre diameter / two hoop iron strips 25 millimetre X 1.60 millimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 31 | ITEM No. 29 :- Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimetre diameter / two hoop iron strips 25 millimetre X 1.60 millimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etcetera complete. (Material including all lead and lifts) (First Floor) |
| 32 | ITEM No. 30 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or burnt brick masonry and or tying by binding wire etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 33 | ITEM No. 31 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or burnt brick masonry and or tying by binding wire etcetera complete. (Material including all lead and lifts) (First Floor) |
| 34 | ITEM No. 32 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 35 | ITEM No. 33 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 36 | ITEM No. 34 :- Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts) |
| 37 | ITEM No. 35 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 38 | ITEM No. 36 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete. (Material including all lead and lifts) (First Floor) |
| 39 | ITEM No. 37 :- Labour charges for providing groove in external plaster having width and spaced as directed by Engineer in charge etcetera complete. (Ground Floor) |
| 40 | ITEM No. 38 :- Labour charges for providing groove in external plaster having width and spaced as directed by Engineer in charge etcetera complete. (First Floor) |
| 41 | ITEM No. 39 :- Providing patti / band 75 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in C.M. 1:3 line and level including neat finishing scaffolding curing etcetera complete. (Ground Floor) |
| 42 | ITEM No. 40 :- Providing patti / band 75 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in C.M. 1:3 line and level including neat finishing scaffolding curing etcetera complete. (First Floor) |
| 43 | ITEM No. 41 :- Providing and applying Texture plaster with finishing with Purli / Rustic texture material (with texture material of Asian / Renava / Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface scaffolding etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 44 | ITEM No. 42 :- Providing and applying Texture plaster with finishing with Purli / Rustic texture material (with texture material of Asian / Renava / Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface, including Plaster Groove 6millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface scaffolding etcetera complete. (Material including all lead and lifts) (First Floor) |
| 45 | ITEM No. 43 :- Providing water proof bedding for flooring of Bath and WC 25 millimetre thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 46 | ITEM No. 44 :- Providing water proof bedding for flooring of Bath and WC 25 millimetre thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etcetera complete. (Material including all lead and lifts) (First Floor) |
| 47 | ITEM No. 45 :- Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 48 | ITEM No. 46 :- Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etcetera complete. (Material including all lead and lifts) (First Floor) |
| 49 | ITEM No. 47 :- Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12 millimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1 kilogram for per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 millimetre thick brick bedding in cement mortar 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 50 | ITEM No. 48 :- Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12 millimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1 kilogram for per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 millimetre thick brick bedding in cement mortar 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 51 | ITEM No. 49 :- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound marking finished surface with false squares of 300 millimetre X 300 millimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak-proofness on Court fee stamp paper of Rs. 500/- including ponding test etcetera complete. |
| 52 | ITEM No. 50 :- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera on cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 53 | ITEM No. 51 :- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera on cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etcetera complete. (Material including all lead and lifts) (First Floor) |
| 54 | ITEM No. 52 :- Providing and laying vitrified rustic matt stone finish tiles having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre of 8 to 10millimetre thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. a) Flooring (Material including all lead and lifts) (Ground Floor) |
| 55 | ITEM No. 53 :- Providing and laying vitrified rustic matt stone finish tiles having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre of 8 to 10millimetre thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. a) Flooring (Material including all lead and lifts) (First Floor) |
| 56 | ITEM No. 54 :- Providing and laying vitrified rustic matt stone finish tiles having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre to 8 to 10 millimetre thickness and confirming to I.S. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etcetera complete. b) Skirting (Ground Floor) |
| 57 | ITEM No. 55 :- Providing and laying vitrified rustic matt stone finish tiles having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre to 8 to 10 millimetre thickness and confirming to I.S. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etcetera complete. b) Skirting (First Floor) |
| 58 | ITEM No. 56 :- Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre confirming to I.S.15622/2006 (group D II-A) and 7 to 8 millimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etcetera complete. (Ground Floor) |
| 59 | ITEM No. 57 :- Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre confirming to I.S.15622/2006 (group D II-A) and 7 to 8 millimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etcetera complete. (First Floor) |
| 60 | ITEM No. 58 :- Providing and laying ceramic tiles having size 30 centimetre X 45 centimetre confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 61 | ITEM No. 59 :- Providing and laying ceramic tiles having size 30 centimetre X 45 centimetre confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 62 | ITEM No. 60 :- Providing and laying polished hand cut Kotah Stone flooring 25 millimetre to 30 millimetre thick and 45 centimetre to 55 centimetre wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (Material including all lead and lifts) (Ground Floor) |
| 63 | ITEM No. 61 :- Providing and laying polished hand cut Kotah Stone flooring 25 millimetre to 30 millimetre thick and 45 centimetre to 55 centimetre wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (Material including all lead and lifts) (First Floor) |
| 64 | ITEM No. 62 :- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre X 40 millimetre X 5 millimetre with oil painting, etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 65 | ITEM No. 63 :- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre X 40 millimetre X 5 millimetre with oil painting, etcetera complete. (Material including all lead and lifts) (First Floor) |
| 66 | ITEM No. 64 :- Providing and laying vitrified matt finish tiles having size 590 millimetre to 605 millimetre X to 605 millimetre of 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. b) Skirting (Material including all lead and lifts) |
| 67 | ITEM No. 65 :- Providing 25 millimetre to 30 millimetre thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etcetera fixing in cement mortar 1:3 curing and cement etcetera complete. b) Both side polish (Material including all lead and lifts) (Ground Floor) |
| 68 | ITEM No. 66 :- Providing 25 millimetre to 30 millimetre thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etcetera fixing in cement mortar 1:3 curing and cement etcetera complete. b) Both side polish (Material including all lead and lifts) |
| 69 | ITEM No. 67 :- Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in cement mortar 1:3 curing and cleaning etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 70 | ITEM No. 68 :- Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in cement mortar 1:3 curing and cleaning etcetera complete. (Material including all lead and lifts) (First Floor) |
| 71 | ITEM No. 69 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 72 | ITEM No. 70 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete. (Material including all lead and lifts) (First Floor) |
| 73 | ITEM No. 71 :- Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etcetera complete. (Ground Floor) |
| 74 | ITEM No. 72 :- Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etcetera complete. (First Floor) |
| 75 | ITEM No. 73 :- Providing and preparing kitchen otta up to 75 centimetre width, made up from 30 millimetre thick and 75 centimetre high vertical support for kadppa at 1 metre. Centre to centre of 25 millimetre thick both side polished kadappa middle shelf and bottom of 20 millimetre thick one side polished kadappa with facia patti of 20 x 50 millimetre kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etcetera complete. (Ground Floor) |
| 76 | ITEM No. 74 :- Providing and preparing kitchen otta up to 75 centimetre width, made up from 30 millimetre thick and 75 centimetre high vertical support for kadppa at 1 metre. Centre to centre of 25 millimetre thick both side polished kadappa middle shelf and bottom of 20 millimetre thick one side polished kadappa with facia patti of 20 x 50 millimetre kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etcetera complete. (First Floor) |
| 77 | ITEM No. 75 :- Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram per square metre of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etcetera complete. (using 100% crushed sand) (Material including all lead and lifts) |
| 78 | ITEM No. 76 :- Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35millimetre thick style and rail with 25 millimetre thick panels with openable fan light as per detailed drawings. Excluding the door frame 60millimetre X 100 millimetre stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) (Material including all lead and lifts) (Ground Floor) |
| 79 | ITEM No. 77 :- Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35millimetre thick style and rail with 25 millimetre thick panels with openable fan light as per detailed drawings. Excluding the door frame 60millimetre X 100millimetre stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) (Material including all lead and lifts) (First Floor) |
| 80 | ITEM No. 78 :- Providing and fixing 34 millimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 millimetre thickness lipped with 15 millimetre ( 5 millimetre X 3 ) thick X 30 millimetre width on one style and top rail and 10 millimetre (5 millimetre X 2 ) thick X 30 millimetre width on other style and bottom rails. The inner panels laminated with 2 millimetre thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 millimetre plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 81 | ITEM No. 79 :- Providing and fixing 34 millimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 millimetre thickness lipped with 15 millimetre ( 5 millimetre X 3 ) thick X 30 millimetre width on one style and top rail and 10 millimetre (5 millimetre X 2 ) thick X 30 millimetre width on other style and bottom rails. The inner panels laminated with 2 millimetre thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 millimetre plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 82 | ITEM No. 80 :- Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish, scaffolding if required etcetera complete. Note :- The work to be executed on prior approval of Superintending Engineer will be necessary. (Ground Floor) |
| 83 | ITEM No. 81 :- Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish, scaffolding if required etcetera complete. Note :- The work to be executed on prior approval of Superintending Engineer will be necessary. (First Floor) |
| 84 | ITEM No. 82 :- Providing and fixing fiber glass reinforced polyster door shutter 30 millimetre thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etcetera complete |
| 85 | ITEM No. 83 :- Providing and fixing fiber glass reinforced polyster door shutter 30 millimetre thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etcetera complete |
| 86 | ITEM No. 84 :- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 millimetre with lock plate of 3.15 millimetre thickness reinforced with 35 x 35 x 5 millimetre angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 millimetre and 3.15 millimetre respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 millimetre minimum size and shape with square bar, suspension shaft of minimum 32 millimetre diameter, hood cover of M.S. sheet not less than 0.9 millimetre thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etcetera complete. (I.S. 62481979) (With mechanical gear) |
| 87 | ITEM No. 85 :- Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to Specifications and as directed by Engineer in charge. (Material including all lead and lifts) (Ground Floor) |
| 88 | ITEM No. 86 :- Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to Specifications and as directed by Engineer in charge. (Material including all lead and lifts) (First Floor) |
| 89 | ITEM No. 87 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 X 38 millimetre X 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 90 | ITEM No. 88 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 X 38 millimetre X 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete. (Material including all lead and lifts) (First Floor) |
| 91 | ITEM No. 89 :- Providing and fixing 50 millimetre diameter and 1.5 millimetre thick vertical and top Stainless steel hand railing in S.S.304 Grade with Stainless steel square / circular pipe bracing of size 32 millimetre X 32 millimetre X 1.5 millimetre in 3 rows including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 92 | ITEM No. 90 :- Providing and fixing 50 millimetre diameter and 1.5 millimetre thick vertical and top Stainless steel hand railing in S.S.304 Grade with Stainless steel square / circular pipe bracing of size 32 millimetre X 32 millimetre X 1.5 millimetre in 3 rows including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etcetera complete. (Material including all lead and lifts) (First Floor) |
| 93 | ITEM No. 91 :- Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts) |
| 94 | ITEM No. 92 :- Providing and fixing on walls / ceiling / floor 25 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts) |
| 95 | ITEM No. 93 :- Providing and fixing on walls /ceiling/ floor 40 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts) |
| 96 | ITEM No. 94 :- Providing and fixing on walls/ ceiling/ floor 50 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. |
| 97 | ITEM No. 95 :- Providing and fixing C.P. Two way BIB cock of approved make including necessary sockets / union nut etcetera complete. (Material including all lead and lifts) |
| 98 | ITEM No. 96 :- Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etcetera complete. |
| 99 | ITEM No. 97 :- Providing and fixing Wall Mounted European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 millimetre diametre UPVC flush pipe with fittings and clamps, 20 millimetre diametre UPVC overflow pipe, mosquito proof couplings G.I. chain and pulley, with water Jet and fitting including cutting and making good to the walls and floors testing etcetera complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) |
| 100 | ITEM No. 98 :- Providing and fixing white glazed urinal of size 710 X 460 X 300 millimetre with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 millimetre diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap and soil pipe connection upto the outside face of wall etcetera complete. |
| 101 | ITEM No. 99 :- Providing and fixing Table top white wash basin of size 120 X 635 X 405 millimetre rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to the outside face of the wall etcetera complete as directed by Engineer in charge. (Material including all lead and lifts) |
| 102 | ITEM No. 100 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre including coupling, outlet pipe, elbow and other necessary fitting, finishing etcetera complete. (Material including all lead and lifts) |
| 103 | ITEM No. 101 :- Providing and fixing 10 centimetre PVC nahani trap with grating etcetera complete. (Material including all lead and lifts) |
| 104 | ITEM No. 102 :- Providing and fixing screw down for 25 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete. (Material including all lead and lifts) |
| 105 | ITEM No. 103 :- Providing and fixing screw down for 40 millimetre diameter wheeled stop tap of brass including necessary sockets/ union nut complete. (Material including all lead and lifts) |
| 106 | ITEM No. 104 :- Providing and fixing screw down for 50 millimetre diameter wheeled stop tap of brass including necessary sockets/ union nut complete. (Material including all lead and lifts) |
| 107 | ITEM No. 105 :- Providing and fixing Poly Vinyl Chloride Rain water pipes of 110 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40 millimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes, all the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete. (The contractor shall give 3 years guarantee bond for payment). (Material including all lead and lifts) |
| 108 | ITEM No. 106 :- Providing and laying concrete pipes of I.S. NP class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts) |
| 109 | ITEM No. 107 :- Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts) |
| 110 | ITEM No. 108 :- Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts) |
| 111 | ITEM No. 109 :- Providing and fixing in position UPVC ultra violet stabilized 110 millimetre outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etcetera complete. (Material including all lead and lifts) |
| 112 | ITEM No. 110 :- Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats. (Material including all lead and lifts) |
| 113 | ITEM No. 111 :- Providing and fixing 450 millimetre X 550millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etcetera complete. (Material including all lead and lifts) |
| 114 | ITEM No. 112 :- Providing and fixing 15 millimetre diameter PVC Aqua kraft type Supreme make or equivalent make super Pillar tap with flange including all accessories etcetera complete. |
| 115 | ITEM No. 113 :- Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre X 595 millimetre having 15 millimetre thick densified micro look edge and 100% humidity resistance in combustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 X 600 millimetre made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6 millimetre reveal profile (white/black), wherein, main T runner of size 42 millimetre X 14 millimetre between main tee 600 millimetre center to center and secondary cross T of size 33 X 14 X 0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre X 600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimeter X 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors etcetera, wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25 X 35 X 1.6 millimetre of required length fixed to the ceiling with 6 millimetre diametre and 50 millimetre long dash fastener, 4 millimetre diametre G.I. adjustable rods with powder-coated / good quality G.I. level adjustment clips of 35 X 35 X 0.8 millimetre spaced at the rate of 1200, center-to-center along main T all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (Ground Floor) |
| 116 | ITEM No. 114 :- Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre X 595 millimetre having 15 millimetre thick densified micro look edge and 100% humidity resistance in combustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 X 600 millimetre made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6 millimetre reveal profile (white/black), wherein, main T runner of size 42 millimetre X 14 millimetre between main tee 600 millimetre center to center and secondary cross T of size 33 X 14 X 0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre X 600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimeter X 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors etcetera, wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25 X 35 X 1.6 millimetre of required length fixed to the ceiling with 6 millimetre diametre and 50 millimetre long dash fastener, 4 millimetre diametre G.I. adjustable rods with powder-coated / good quality G.I. level adjustment clips of 35 X 35 X 0.8 millimetre spaced at the rate of 1200, center-to-center along main T all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (First Floor) |
| 117 | ITEM No. 115 :- Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 16 millimetre thick of 1200 millimetre (minimum) width with angular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility and strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers selfdrilling screws and trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of minimum 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a minimum of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.9 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap / Aluminium U/F profile / Glazing Bar for ends as required. Panel shall be fixed over MS structural steel / S purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing and direction of the Engineer in charge. Colour: As per approval The 16 millimetre thick panels shall be used for a roofing height of upto 15 metres. (Ground Floor) |
| 118 | ITEM No. 116 :- Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 16 millimetre thick of 1200 millimetre (minimum) width with angular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility and strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers selfdrilling screws and trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of minimum 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a minimum of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.9 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap / Aluminium U/F profile / Glazing Bar for ends as required. Panel shall be fixed over MS structural steel / S purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing and direction of the Engineer in charge. Colour: As per approval The 16 millimetre thick panels shall be used for a roofing height of upto 15 metres. (First Floor) |
| 119 | ITEM No. 117 :- Providing and applying two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 120 | ITEM No. 118 :- Providing and applying two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etcetera complete. (Material including all lead and lifts) (First Floor) |
| 121 | ITEM No. 119 :- Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 122 | ITEM No. 120 :- Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etcetera complete. (Material including all lead and lifts) (First Floor) |
| 123 | ITEM No. 121 :- Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I. S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etcetera complete. (First Floor) |
| 124 | ITEM No. 122 :- Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I. S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etcetera complete. (First Floor) |
| 125 | ITEM No. 123 :- Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours, wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours, Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of Superintending Engineer) (Material including all lead and lifts) (Ground Floor) |
| 126 | ITEM No. 124 :- Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours, wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours, Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of Superintending Engineer) (Material including all lead and lifts) (First Floor) |
| 127 | ITEM No. 125 :- Providing and fixing mild steel grill work for windows, ventilators etcetera 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Material including all lead and lifts) |
| 128 | ITEM No. 126 :- Providing and fixing mild steel grill work for windows, ventilators etcetera 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Material including all lead and lifts) |
| 129 | ITEM No. 127 :- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etcetera complete. (Ground Floor) |
| 130 | ITEM No. 128 :- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etcetera complete. (First Floor) |
| 131 | ITEM No. 129 :- Providing and laying in situ cement concrete M-30 with tremix treatment for 200 millimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen (excluding reinforcement) with Natural sand etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 132 | ITEM No. 130 :- Providing and laying in situ cement concrete M-30 with tremix treatment for 200 millimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen (excluding reinforcement) with Natural sand etcetera complete. (Material including all lead and lifts) (First Floor). |
| 133 | ITEM No. 131 :- Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete. (Material including all lead and lifts) |
| 134 | ITEM No. 132 :- Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete. (Material including all lead and lifts) |
| 135 | ITEM No. 133 :- PROVIDING AND FIXING ACOUSTICAL FALSE CEILING WITH 0.7 NRC: Sierra Mineral Fibre Acoustical Suspended Ceiling System with 13mm thick Microlook Edge Tiles with 15 millimetre face exposed grid. The tiles shall have smooth laminated salt pepper visual with Humidity Resistance (RH) of 95%, NRC 0.7 (Average value of Absorption Coefficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 28db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity λ = 0.037W/mK, Colour Global White, Fire Performance of class A2-s1, d0 according to EN 13501-1 with 13 millimetre Microlook edge and 8 millimetre drop in module size of 600 X 600 millimetre. The scrim on the face of the tile shall be cleanable. The tiles shall be classified as ISO 14644-1 cleanroom class 5. It shall be suitable for Green Building application, with Recycled content of 60%. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on 15 millimetre wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 millimetre and 600 millimetre Cross Tees with a web height of 38 millimetre (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15 kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill. The Tile and Grid system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile and Grid shall have the manufacturers name embossed / printed on it. The supply shall be backed by a Manufacturing Test Certificate. |
| 136 | ITEM No. 134 :- PROVIDING AND FIXING ACOUSTICAL FALSE CEILING WITH 0.7 NRC: Sierra Mineral Fibre Acoustical Suspended Ceiling System with 13 mm thick Microlook Edge Tiles with 15 millimetre face exposed grid. The tiles shall have smooth laminated salt pepper visual with Humidity Resistance (RH) of 95%, NRC 0.7 (Average value of Absorption Coefficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 28db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity λ = 0.037W/mK, Colour Global White, Fire Performance of class A2-s1, d0 according to EN 13501-1 with 13 millimetre Microlook edge and 8 millimetre drop in module size of 600 X 600 millimetre. The scrim on the face of the tile shall be cleanable. The tiles shall be classified as ISO 14644-1 cleanroom class 5. It shall be suitable for Green Building application, with Recycled content of 60%. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on 15 millimetre wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 millimetre and 600 millimetre Cross Tees with a web height of 38 millimetre (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15 kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill. The Tile and Grid system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile and Grid shall have the manufacturers name embossed / printed on it. The supply shall be backed by a Manufacturing Test Certificate. |
| 137 | ITEM No. 135 :- Providing and fixing double scaffolding system (cup lock type) on the exterior side of building / structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 millimetre diametre M.S. tube, placed 1.5 metre centre to centre, horizontal and vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etcetera and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etcetera, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. (Ground Floor) |
| 138 | ITEM No. 136 :- Providing and fixing double scaffolding system (cup lock type) on the exterior side of building / structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 millimetre diametre M.S. tube, placed 1.5 metre centre to centre, horizontal and vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etcetera and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etcetera, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. (First Floor) |
| 139 | ITEM No. 137 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. (Material including all lead and lifts) |
| 140 | ITEM No. 138 :- Design, supply, fabrication and fixing of SS, non glare Signage board (2 ft. X 2 ft.- 1 One Number) for the accessible parking, as per the approved design and make, having 1.2 millimetre thick SS non glare base plate and Grade 2/ Grade 1 Braille (raised dots)to be etched/ engraved and be raised 0.5 millimetre above base plate and Upper Case San Serif words and Universal Accessibility Symbol to be etched/ engraved and signage to be installed at a height of 2100 millimetre from the ground level using a post of MS hollow square section (50 millimetre x 50 millimetre) as per the installation procedure specified by the manufacturer and as per accessibility standards and up to the satisfaction of the Engineer in charge. (Material including all lead and lifts) (Ground Floor) |
| 141 | ITEM No. 139 :- Design, supply, fabrication and fixing of SS, non glare Signage board (2 ft. X 2 ft.- 1 One Number) for the accessible parking, as per the approved design and make, having 1.2 millimetre thick SS non glare base plate and Grade 2/ Grade 1 Braille (raised dots)to be etched/ engraved and be raised 0.5 millimetre above base plate and Upper Case San Serif words and Universal Accessibility Symbol to be etched/ engraved and signage to be installed at a height of 2100 millimetre from the ground level using a post of MS hollow square section (50 millimetre x 50 millimetre) as per the installation procedure specified by the manufacturer and as per accessibility standards and up to the satisfaction of the Engineer in charge. (Material including all lead and lifts) (First Floor) |
| 142 | ITEM No. 140 :- Providing, laying and fixing, jointing Supreme Eco- drain 110 millimetre SN 8 Nu- Drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etcetera, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etcetera complete. (Material including all lead and lifts) |
| 143 | ITEM No. 141 :- Providing, laying and fixing, jointing Supreme Eco- drain 160 millimetre SN 4 Nu- Drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etcetera, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etcetera complete. (Material including all lead and lifts) |
| 144 | ITEM No. 142 :- Providing, laying and fixing, jointing Supreme Eco- drain 200 millimetre SN 4 Nu- Drain UPVC pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler etcetera, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etcetera complete. (Material including all lead and lifts) |
| 145 | ITEM No. 143 :- Providing , Laying and fixing, jointing Eco Drain 250 millimetre SN-04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 and 16098 with fittings such a bends, tees, coupler, etcetera jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etcetera complete. (Material including all lead and lifts) |
| 146 | ITEM No. 144 :- Providing , Laying and fixing, jointing Eco Drain 315 millimetre SN-04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 and 16098 with fittings such a bends, tees, coupler, etcetera jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etcetera complete. (Material including all lead and lifts) |
| 147 | ITEM No. 145 :- Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450 millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete. (Material including all lead and lifts) |
| 148 | ITEM No. 146 :- Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete. (Material including all lead and lifts) |
| 149 | ITEM No. 147 :- Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 800millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete. (Material including all lead and lifts) |
| 150 | ITEM No. 148 :- Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading – II Material (Material including all lead and lifts) |
| 151 | ITEM No. 149 :- Providing and laying in situ cement concrete M -30 with tremix treatment for 200 millimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (excluding reinforcement) with coarsen and fine aggregate Using V.S.I. Quality Artifitial Sand etcetera complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. (Material including all lead and lifts) |
| 152 | ITEM No. 150 :- Providing and casting in situ or precast tapering reinforced cement concrete M-20 Semi Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125 millimetre below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant. (Material including all lead and lifts) |
| 153 | ITEM No. 151 :- Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No.RW/NH/33023/10-97 DO III Dt 11.06.1997. The height, width and length shall not exceed 50 millimetre, 100 millimetre and 102 +/- 2 millimetre and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 millimetre and height not less than 30+/- 2 millimetre) from the body is to be a minimum value of 500 Kilogram Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (Material including all lead and lifts) |
| 154 | ITEM No. 152 :- Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 millimetre thick including 1.5 Refractive index reflectorizing glass beads at the rate of 250 grams per square metre. Thickness of 2.5 millimetre is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL and QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications. (Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015) |
| 155 | ITEM No. 153 :- Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 millimetre thick in M-40 grade of approved size and shape for City streets, small / medium market roads, low volume roads, utility cuts on arterial roads etcetera as specified and as per IS 15658 : 2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 millimetre thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etcetera complete. |
| 156 | ITEM No. 154 :- Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite / quartzite / gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood / steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etcetera complete, With natural sand/V.S.I. quality Artificial Sand |
| 157 | ITEM No. 155 :- Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 X 9 X 3 millimetre minimum size, crossings of Mild Steel flats of size 18 X 5 millimetre T or E section for runner of minimum 40 X 6 millimetre size for flange, M.S. flat for top runner of minimum size 40 X 12 millimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 millimetre max. spacing of vertical channels be 100 millimetre enclosed gate position and clear space of 150 millimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etcetera complete. (I.S. 10521:1983). (Material including all lead and lifts) |
| 158 | ITEM No. 156 :- Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 159 | ITEM No. 157 :- Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etcetera complete. (Material including all lead and lifts) (First Floor) |
| 160 | ITEM No. 158 :- Providing and fixing in position Stage flooring Made from 18 millimetre plywood 1200 X 2400 and 18 millimetre Teakwood planks 100 X 800 having tongue and grove on Sal-wood frame of 50 X 100 at 600 millimetre centre to centre on stage surface including cost of required Cut-outs, decorative mouldings / finishing-items / polish etcetera, as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts) |
| 161 | ITEM No. 159 :- PRIVIDING AND FIXING MODULAR ACOUCTICAL WOODEN WALL PANELLING : Of nominal width 100 / 150 millimetre, having 80 millimetre wide panel with 20 millimetre reveal having a thickness of 15 millimetre thickness and length 2400 millimetre. The panel shall be made of a Moisture resistant fibre board substrate having a minimum density of 595 Kg/m3 with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood and Mystique Walnut) and a melamine balancing layer on the reverse side. The panel shall have 0.70 millimetre PVC edge banding along the length side with a similar finish as that of the face. The back of the panel shall have a black acoustic felt to cover the reveal of 20 millimetre to attain an NRC of 0.4 for 150 millimetre / 0.5 for 100 millimetre module (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423. The panels shall provide a Humidity Resistance (RH) of 70% with camber limit less than 1 millimetre / 1000 millimetre and bow less than 1 millimetre / 300 millimetre. The back of the panels shall be profile-grooved to receive 3600 millimetre special main beam carrier with integrated factory fitted clips for installation. SUSPENSION: The panels shall be upward mounted on 24 millimetre wide T - section flanges having rotary stitching along the length of the beam with a web height of 43 millimetre. The Main Beam shall have integrated (factory fitted) locking clips installed at 100 / 150 millimetre centre to centre distance. The deflection loading of the main beam tested as per ASTM C635 (Deflection limit less than L/360) shall be at least 21.4 kilogram per metre. The end details of the main beam shall be made of pre hardened steel and fixed to the ends with 3 point fixing. All main beam to main beam connection shall have a pull out strength of more than 100 kilogram. The T Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. Installation should be carried out as per Manufacturer recommended procedure. The grid shall be installed with suspension system of Manufacturer make. (Material including all lead and lifts) (Ground Floor) |
| 162 | ITEM No. 160 :- PRIVIDING AND FIXING MODULAR ACOUCTICAL WOODEN WALL PANELLING : Of nominal width 100 / 150 millimetre, having 80 millimetre wide panel with 20 millimetre reveal having a thickness of 15 millimetre thickness and length 2400 millimetre. The panel shall be made of a Moisture resistant fibre board substrate having a minimum density of 595 Kg/m3 with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood and Mystique Walnut) and a melamine balancing layer on the reverse side. The panel shall have 0.70 millimetre PVC edge banding along the length side with a similar finish as that of the face. The back of the panel shall have a black acoustic felt to cover the reveal of 20 millimetre to attain an NRC of 0.4 for 150 millimetre / 0.5 for 100 millimetre module (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423. The panels shall provide a Humidity Resistance (RH) of 70% with camber limit less than 1 millimetre / 1000 millimetre and bow less than 1 millimetre / 300 millimetre. The back of the panels shall be profile-grooved to receive 3600 millimetre special main beam carrier with integrated factory fitted clips for installation. SUSPENSION: The panels shall be upward mounted on 24 millimetre wide T - section flanges having rotary stitching along the length of the beam with a web height of 43 millimetre. The Main Beam shall have integrated (factory fitted) locking clips installed at 100 / 150 millimetre centre to centre distance. The deflection loading of the main beam tested as per ASTM C635 (Deflection limit less than L/360) shall be at least 21.4 kilogram per metre. The end details of the main beam shall be made of pre hardened steel and fixed to the ends with 3 point fixing. All main beam to main beam connection shall have a pull out strength of more than 100 kilogram. The T Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. Installation should be carried out as per Manufacturer recommended procedure. The grid shall be installed with suspension system of Manufacturer make. (Material including all lead and lifts) (First Floor) |
| 163 | ITEM No. 161 :- Providing and Fixing in position Acoustical Doors along with 150 x 150 millimetre teak wood frame, doors made from 50 millimetre Teak wood frame 600 x 600 centre to centre filled with 1000 Gsm synthetic wool 50 millimetre thick and 3 millimetre Tecsound from both sides, 12 millimetre waterproof ply and veneer from both sides , including 150 millimetre heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma/Geze or eq.) including cost of required Cut- Outs, decorative mouldings / finishing-items / melamine polish and Scaffolding as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 164 | ITEM No. 162 :- Providing and Fixing in position Acoustical Doors along with 150 x 150 millimetre teak wood frame, doors made from 50 millimetre Teak wood frame 600 x 600 centre to centre filled with 1000 Gsm synthetic wool 50 millimetre thick and 3 millimetre Tecsound from both sides, 12 millimetre waterproof ply and veneer from both sides , including 150 millimetre heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma/Geze or eq.) including cost of required Cut- Outs, decorative mouldings / finishing-items / melamine polish and Scaffolding as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 165 | ITEM No. 163 :- Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5 millimetre underlay as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 166 | ITEM No. 164 :- Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5 millimetre underlay as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 167 | ITEM No. 165 :- Providing and Fixing in position, Fabric wrapped Compressed polyester fibre nonwoven 9 millimetre panels above the wood wool board panelling or existing sal wood frame, using adhesive, as per Architectural and Acoustical Design and Instructions and Complete in all aspects, including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 168 | ITEM No. 166 :- Providing and Fixing in position, Fabric wrapped Compressed polyester fibre nonwoven 9 millimetre panels above the wood wool board panelling or existing sal wood frame, using adhesive, as per Architectural and Acoustical Design and Instructions and Complete in all aspects, including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 169 | ITEM No. 167 :- Providing and Fixing in position, Acoustical Panelling made from Gypsum plain 12 millimetre panels on 50 X 50 millimetre Sal-wood frame of 600 x 600 centre to centre having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 millimetre thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing items / paint and Scaffolding, as per Architectural and Acoustical Design and Instructions and complete in all aspects, including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 170 | ITEM No. 168 :- Providing and Fixing in position, Acoustical Panelling made from Gypsum plain 12 millimetre panels on 50 X 50 millimetre Sal-wood frame of 600 x 600 centre to centre having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 millimetre thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing items / paint and Scaffolding, as per Architectural and Acoustical Design and Instructions and complete in all aspects, including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 171 | ITEM No. 169 :- Providing and Fixing in position, Acoustical Ceiling made from Gypsum Plain Panels on approved heavy duty G.I. frame ceiling channels at 450 centre to centre and intermediate channels not more than 1200 centre to centre, alongwith plywood forms suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 millimetre thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical Design and Instructions and complete in all aspects, including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 172 | ITEM No. 170 :- Providing and Fixing in position, Acoustical Ceiling made from Gypsum Plain Panels on approved heavy duty G.I. frame ceiling channels at 450 centre to centre and intermediate channels not more than 1200 centre to centre, alongwith plywood forms suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 millimetre thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical Design and Instructions and complete in all aspects, including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 173 | ITEM No. 171 :- Providing and Fixing in position, Acoustical Ceiling made from Compressed polyester fibre nonwoven 9 millimetre panels on approved heavy duty GI frame 300 millimetre centre to centre and intermediate channels at 1200 millimetre centre to centre, suspended with Hangers from Roof, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetre complete. (Material including all lead and lifts) (Ground Floor) |
| 174 | ITEM No. 172 :- Providing and Fixing in position, Acoustical Ceiling made from Compressed polyester fibre nonwoven 9 millimetre panels on approved heavy duty GI frame 300 millimetre centre to centre and intermediate channels at 1200 millimetre centre to centre, suspended with Hangers from Roof, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical Design and Instructions and complete in all aspects including all materials labour, finishing etcetre complete. (Material including all lead and lifts) (First Floor) |
| 175 | ITEM No. 173 :- Providing and installation of Saint Gobain Certain Teed Premium Asphalt Roofing shingles and matching Ridge Accessories, Series : Landmark AR, in approved color, ensuring complete system compatibility and uniform finish. The shingles are fiberglass mat reinforced, asphalt impregnated, manufactured as per ASTM standards with Class A fire rating, and designed with minimum 50% overlap for superior waterproofing performance and durability under temperature variations from -30°C to +90°C. The scope includes precise cutting, sizing, handling and complete installation of shingles and ridge accessories with required overlap using approved torch method, adhesives, and sealants, strictly as per manufacturer’s specifications. 1) Providing and installation of non-asbestos 16 millimetre thickness fiber cement board high-pressure steam-cured standards, used as a roof underlay board. The boards shall be fixed on a supporting frame made of MS RHS / SHS sections as per structural design, with purlin spacing maintained at 600–800 millimetre centre to centre. The scope includes cutting, sizing, handling, and fixing of boards using self-tapping screws and required hardware and finished as per manufacturer’s specifications. 2) Providing and installation of cold-applied bituminous Primer on prepared roof surface to ensure proper adhesion of APP waterproofing membrane. Primer to be applied uniformly at recommended coverage rate and allowed to dry before membrane installation. 3) Providing and installation of 3 millimetre Thick APP waterproofing membrane with centre core Polyster reinforcement GSM impregnated with high grade bitumen app from both sides. The item includes application of specs one coat of oil based primer on roof surface, cutting, sizing, handling required to install waterproofing membreane with heat torching method, minimium 50 - 75 millimetre overlap in both horizontal and verical joints as per required specification below Roofing shingles complete. (Material including all lead and lifts) |
| 176 | ITEM No. 174 :- Providing and Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty G.I. frame, ceiling channels at 300 centre to centre, & intermediate channels not more than 1200 centre to centre, suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 millimetre thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical and Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (Ground Floor) |
| 177 | ITEM No. 175 :- Providing and Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty G.I. frame, ceiling channels at 300 centre to centre, & intermediate channels not more than 1200 centre to centre, suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 millimetre thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical and Design and Instructions and complete in all aspects including all materials labour, finishing etcetera complete. (Material including all lead and lifts) (First Floor) |
| 178 | ITEM No. 176 :- Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 millimetre thick ACP sheet material consisting of 3 millimetre thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 millimetre thick of AA 5005 / AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF / Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and shade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etcetera overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre) (Material including all lead and lifts) (Ground Floor) |
| 179 | ITEM No. 177 :- Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 millimetre thick ACP sheet material consisting of 3 millimetre thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 millimetre thick of AA 5005 / AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF / Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and shade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etcetera overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre) (Material including all lead and lifts) (First Floor) |
| 180 | ITEM No. 178 :- Providing and Fixing in position, 1000 millimetre wide Auto-glow Aluminium extruded strips on auditorium steps as per Design and Instructions and Complete in all aspects. Make Piccolo or Nexus. (Material including all lead and lifts) (Ground Floor) |
| 181 | ITEM No. 179 :- Providing and Fixing in position, 1000 millimetre wide Auto-glow Aluminium extruded strips on auditorium steps as per Design and Instructions and Complete in all aspects. Make Piccolo or Nexus. (Material including all lead and lifts) (First Floor) |
| 182 | ITEM No. 180 :- Providing and fixing in position, Under Deck insulation for metal deck using 1000 GSM synthetic wool with fixed to deck using adhesive and chicken mesh. (Material including all lead and lifts) (Ground Floor) |
| 183 | ITEM No. 181 :- Providing and fixing in position, Under Deck insulation for metal deck using 1000 GSM synthetic wool with fixed to deck using adhesive and chicken mesh. (Material including all lead and lifts) (First Floor) |
| 184 | ITEM No. 182 :- Providing and Fixing Rollar Blinds AMI Make or approved make and shade of 38 millimetre round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etcetera complete. (Sample to be final by Engineer In-charge prior execution of work). (Material including all lead and lifts) (Ground Floor) |
| 185 | ITEM No. 183 :- Providing and Fixing Rollar Blinds AMI Make or approved make and shade of 38 millimetre round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etcetera complete. (Sample to be final by Engineer In-charge prior execution of work). (Material including all lead and lifts) (First Floor) |
| 186 | ITEM No. 184 :- Providing and Fixing Vertical Blinds of approved Make and shade of 100 millimetre regular fabric with powder coated aluminium channel with telting PVC chain and bottom weight plate with all necessary fixtures and fitting etcetera complete. (Sample to be final by Engineer In-charge prior execution of work). (Material including all lead and lifts) (Ground Floor) |
| 187 | ITEM No. 185 :- Providing and Fixing Vertical Blinds of approved Make and shade of 100 millimetre regular fabric with powder coated aluminium channel with telting PVC chain and bottom weight plate with all necessary fixtures and fitting etcetera complete. (Sample to be final by Engineer In-charge prior execution of work). (Material including all lead and lifts) (First Floor) |
| 188 | ITEM No. 186 :- Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system. (Material including all lead and lifts) (Ground Floor) |
| 189 | ITEM No. 187 :- Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system. (Material including all lead and lifts) (First Floor) |
| 190 | ITEM No. 188 :- Providing and fixing of Curtain wall system as per approved drawings and details. The extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard from approved raw material source by NALCO. Using speclally designed framework including of profile sections with average minimum thickness of 2 millimeter - MULLION 60 millimeter X 128.5 millimeter and transome 60 millimeter X 134 millimeter with powder coated All externally visible surface and the internal visible surfaces will have powder coating finish RAL 9010 of 60 -70 micron thickness, Jotun Make or equivalent. The non visible aluminium surfaces will have minimum chromatizing treatment aluminium extrusions (minimum 60 micron) in approved colour, hot dip galvanized required brackets / clamps: bolts, nuts, washers and shims: Stainless Steel expansion fasteners with bolts, nuts and washers: silicon / ethylene propylene diene monomer (M-class) rubber gaskets : drainage provisions : weather seals : flashings and seals at all interfaces with building structure, openings and cladding system, etcetera, Glass-8 millimeter Blue tinted toughened glass. DOW Corning silicon / GE/ Wackers with Stainless Steel 304 screws complete to make the structural As directed by Engineer in charge glazing air tight and water tight as per Indian Standards / Bharat standards standards complete as per architectural drawings and specifications as directed by the Engineer-in-charge. (Material including all lead and lifts) |
| 191 | ITEM No. 189 :- Providing and fixing MACHINE PRESSED WIRE CUT brick of 200 millimetre X 100 millimetre X 75 millimetre built in CM (1:4). These bricks should be manufactured from good quality plastic earth, which is free from saline deposits should be good uniform color, are well burnt, giving a hard ringing sound when two bricks are struck together. The bricks shall have plane rectangular faces with parallel sides and sharp straight right angled edges. Bricks should have uniform color and even texture all as directed by Engineer-in- charge. (Material including all lead and lifts) |
| 192 | ITEM No. 190 :- Providing and fixing in position, heavy duty fully upholstered Auditorium chairs 520 millimetre centre to centre tip-up type. Height of back should be less than 1030 millimetre with plastic protective cover on back and bottom having teak wood handles. Back to back distance is 1000 millimetre. The auditorium chairs should be of following specifications 1. Powder Coated Heavy duty MS Stand. 2. Individually moulded, ergonomically designed seat and back cushions. 3. Moulded Polyurethane Foam cushion. PU foam density 48 – 52 Kilograms / cu.mtr 4. Moulded Polyurethane Foam manufactured in certified ISO 9001 facility to ensure consistency in density for longevity. 5. Upholstered in Foam laminated stretch sandwich Fabric for clean finish and soft comfortable feel as per the colour and pattern selected by the client. 6. Seat and Back should have moulded synthetic protective cover. 7. Wooden or PU armrest 65 millimetre X 20 millimetre – 330 millimetre long. 8. Mounted using Anchor fasteners. (Material including all lead and lifts) |
| 193 | ITEM No. 191 :- Supplying and fixing of 6 millimetre thick Exterior Compact Laminate or High Pressure Laminate of approved colour by approving authority with UV resistant Decorative colour paper on both side typically made out of multiple layers of craft papers and then impregnated with thermosetting phenolic resins, on top of it melamine treated barrier paper and decorative paper and wear layer on both the sides saturated with melamine resins and then covered with UV resistant acrylic resin layer which makes it extremely durable and weather resistant compressed together on extremely high pressure and hardened with electron beam curing to get the total desired thickness of 6mm matching European standard specification as per EN 438 -part 6, protected with 60 Micron protective peel-off film on both side which in no case leave any adhesive mark over the panel surface after it is peeled off. Fixing of the same to be done on a supporting frame of 50 millimetre X 5 millimetre X 3 millimetre powder coated aluminium box section to be spaced horizontally and vertically in 600 millimetre X 600 millimetre grid and fixed to building structure as per design through 50 millimetre X 50 millimetre X 5 millimetre, MS angle bracket prefixed to masonry slab or columns with Hilti make anchor fastener along with all related hardware and fixtures. The panel should then be fixed on the Aluminium section with the help of pure polyester exterior grade colour coating rivets as per architectural drawings or as directed by Engineer-in-charge. Each panel should be riveted on substructure maintaining a gap of 6mm on all the sides between each Panel for Air circulation and expansion and contraction as per installation specifications provided by the manufacturer. The cost shall include all expenses related to storage, material handling, lifting, freight, labour, scaffolding etc as directed by Engineer-in-charge. (Prior approval of sample is necessary from Superintending Engineer is necessary) (Ground Floor). |
| 194 | ITEM No. 192 :- Cladding, Designing, supplying and fixing of Clay tile of Terracotta (Red Series) or Equivalent with suitable size and thickness not less than 20 millimetre as per manufacturer with approved colour and pattern with Premium wall tile adhesive material, with epoxy filling in grooves, including scaffolding if necessary, cleaning and preparing the surface good for Cladding etcetera Complete. (Material including all lead and lifts) |
| 195 | ITEM No. 193 :- Supply and installation of Kinetic Facade of elevation of building as per given detailed drawings and section. The rate shall be inclusive of all labour, material, scaffolding, transportation, taxes, price escalation including all leads, lifts at all levels and shall be as directed by Engineer in charge. (Material including all lead and lifts) |
| 196 | TOTAL : I) Civil Work Portion |
| 197 | II) Electrical Work Portion |
| 198 | Sub Work I : Internal Electrification |
| 199 | ITEM No. 194 :- Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/ floor with chiselling appropriately as per specification. |
| 200 | ITEM No. 195 :- Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work / false ceiling / false flooring as per specification |
| 201 | ITEM No. 196 :- Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/ floor with chiselling appropriately as per specification. |
| 202 | ITEM No. 197 :- Supplying and laying HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in RCC work/ false ceiling/ false flooring as per specification |
| 203 | ITEM No. 198 :- Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places as per specification. |
| 204 | ITEM No. 199 :- Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places as per specification. |
| 205 | ITEM No. 200 :- Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places. as per specification |
| 206 | ITEM No. 201 :- Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places. as per specification. |
| 207 | ITEM No. 202 :- Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places. as per specification. |
| 208 | ITEM No. 203 :- Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places. as per specification. |
| 209 | ITEM No. 204 :- Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places. as per specification. |
| 210 | ITEM No. 205 :- Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places. as per specification. |
| 211 | ITEM No. 206 :- Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 212 | ITEM No. 207 :- Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 213 | ITEM No. 208 :- Supplying and erecting modular type switch 16 / 20 A with indicator duly erected on provided plate and box with wiring connections complete. |
| 214 | ITEM No. 209 :- Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete. |
| 215 | ITEM No. 210 :- Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete |
| 216 | ITEM No. 211 :- Supplying and erecting modular type blanking plate one module duly erected on provided plate and box. |
| 217 | ITEM No. 212 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 218 | ITEM No. 213 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 219 | ITEM No. 214 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 220 | ITEM No. 215 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 221 | ITEM No. 216 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 222 | ITEM No. 217 :- Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 223 | ITEM No. 218 :- Point wiring for light/ bell hybrid type (Surface type under false ceiling and concealed type for drops and switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification. |
| 224 | ITEM No. 219 :- Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops and switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires modular type switch earthing and required accessories as per specification. |
| 225 | ITEM No. 220 :- Secondary point wiring for additional light/ bell point concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification. |
| 226 | ITEM No. 221 :- Wiring for plug on board with Switch socket surface/ concealed type copper wiring and earthing and with modular accessories as per specification. |
| 227 | ITEM No. 222 :- Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing polystyrene diffuser having system lumens output of Min. 770 Lumens min. efficacy of 110 lumen/ W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 228 | ITEM No. 223 :- Supplying and erecting LED square / circular Max. 14 W down lighter/ Panel Light having pressure die-cast aluminium housing polystyrene diffuser having system lumens output of Min. 1500 Lumens min. efficacy of 110 lumen/ W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 229 | ITEM No. 224 :- Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing polystyrene diffuser having system lumens output of Min. 2000 Lumens min. efficacy of 110 lumen/ W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 230 | ITEM No. 225 :- Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing polystyrene diffuser having system lumens output of Min 4200 Lumens min. efficacy of 120 lumen/ W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 231 | ITEM No. 226 :- Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/ m min. efficacy of 90 lumen/ W CRI>80 CCT upto 5000K Beam Angle of 110 deg. THD<10% p.f. >0.95 operating range of 230-270V Life class of 30 000 Hrs. at L70B50 including driver with 1 year warranty. |
| 232 | ITEM No. 227 :- Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens min. efficacy of 100 lumen/ W CRI>80 CCT upto 6000K Beam Angle of 110 deg. Ripple<5% THD<10% p.f. >0.95 operating range of 200-270V surge protection of 2 kV Life class of 50 000 Hrs. at L70B50 including driver with end caps on provided PVC Block / wooden board with 3 years warranty. |
| 233 | ITEM No. 228 :- Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body and blades wire mesh duly erected complete. |
| 234 | ITEM No. 229 :- Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375/ 380 mm. 900 RPM complete erected in position as per specification. |
| 235 | ITEM No. 230 :- Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm max. energy consumption of 28W having service ratio (CMM/ W) of Min. 8 PF>0.9 THD<10% with IR remote control/ compatible speed regulator Temperature Rise of Max. 40 deg. C having external mounted control PCB completely erected in position as per specification. |
| 236 | ITEM No. 231 :- Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep complete erected on provided switch board. |
| 237 | ITEM No. 232 :- Supplying, erecting, testing and commissioning of self contained water cooler 230/ 250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification. |
| 238 | ITEM No. 233 :- Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/ min with activated carbon filter and softener operating on 230V single phase A.C. supply with UV fail and filter change indication system .(for TDS more than 200) |
| 239 | ITEM No. 234 :- Supplying, installing, testing and commissioning of 10kVA capacity online pure sine wave with backup time of ....... hrs. PWM and IGBT based UPS with 0.9 to unity output pf 3 phase input and 3 phase output complete with all protections as per specification. |
| 240 | ITEM No. 235 :- Supplying and erecting 12V/ 42Ah SMF battery with battery terminal wire duly charged with 24 months warranty complete |
| 241 | ITEM No. 236 :- Supplying, erecting and marking SPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 242 | ITEM No. 237 :- Supplying, erecting and marking SPMCB 6A to 32A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 243 | ITEM No. 238 :- Supplying, erecting and marking DPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 244 | ITEM No. 239 :- Supplying, erecting and marking TPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 245 | ITEM No. 240 :- Supplying, erecting and marking TPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 246 | ITEM No. 241 :- Supplying, erecting and marking FPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 247 | ITEM No. 242 :- Supplying and erecting triple pole and neutral distribution board (TPNDB) SPMCB of 4 ways/ phase (12 poles) with door 1.2mm thickness surface/ flush mounted IP 43 protection on iron/ GI frame (horizontal busbar type) as per specification. |
| 248 | ITEM No. 243 :- Supplying and erecting triple pole and neutral distribution board (TPNDB) SP/ TP MCBs total 4 ways / 12 Poles with door 1.2mm thickness surface/ flush mounted IP 43 Protection on iron/ GI frame (vertical busbar type) as per specification. |
| 249 | ITEM No. 244 :- Supplying and erecting triple pole and neutral distribution board (TPNDB) SP/ TP MCBs total 8 ways / 24 poles with door 1.2mm thickness surface/ flush mounted IP 43 Protection on iron/ GI frame (vertical busbar type) as per specification. |
| 250 | ITEM No. 245 :- Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification. |
| 251 | ITEM No. 246 :- Supplying, Erecting and Commissioning of 2 pole RCCB 16/ 25A electromagnetic type with 30/ 100/ 300 mA sensitivity with earth leakage trip indication complete as per specification. |
| 252 | ITEM No. 247 :- Supplying, Erecting and Commissioning of 4 pole RCCB 16/ 25A electromagnetic type with 30/ 100/ 300 mA sensitivity with earth leakage trip indication complete as per specification. |
| 253 | ITEM No. 248 :- Supplying, Erecting and Commissioning of 4 pole RCCB 40A electromagnetic type with 30/ 100/ 300 mA sensitivity with earth leakage trip indication complete as per specification. |
| 254 | ITEM No. 249 :- Supplying and erecting 75 kVAr 440 V 3 phase 50 Hz. Contactor Logic and Intelligent Relay micro APFC passive filter panel consisting of suitable steps of APP/ MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification. |
| 255 | ITEM No. 250 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 150 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 256 | ITEM No. 251 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 257 | ITEM No. 252 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 258 | ITEM No. 253 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 259 | ITEM No. 254 :- Supplying, erecting and terminating Supplying erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 25 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification |
| 260 | ITEM No. 255 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 50 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 261 | ITEM No. 256 :- Supplying and laying (including excavation) reinforced cement concrete pipe of IS 458 2003 NP-2 class of 150 mm internal diameter in proper line level and slope including providing and fixing collars in cement mortar 1 2 and curing etc. complete. |
| 262 | ITEM No. 257 :- Supplying and laying (including excavation) reinforced cement concrete pipe of IS 458 2003 NP-2 class of 250 mm internal diameter in proper line level and slope including providing and fixing collars in cement mortar 1 2 and curing etc. complete. |
| 263 | ITEM No. 258 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width and 75 mm height complete with necessary coupler plates and hardware. |
| 264 | ITEM No. 259 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width and 75 mm height complete with necessary coupler plates and hardware. |
| 265 | ITEM No. 260 :- Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing and recording the results as per specification. |
| 266 | ITEM No. 261 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and/ or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification. |
| 267 | ITEM No. 262 :- Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/ cable/ conduit with screws complete. |
| 268 | ITEM No. 263 :- Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/ earth plate / for laying cable/ pipe and clearing the site by removing debris and making the site as required complete. |
| 269 | ITEM No. 264 :- second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1 6 in foundation sand plinth of inner walls / in plinth external walls including bailing out water manually striking joints on unexposed faces raking out joints on exposed faces and watering etc. complete. |
| 270 | ITEM No. 265 :- Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram). |
| 271 | ITEM No. 266 :- Supplying and erecting COB spot light circular 20 W having pressure die-cast aluminium housing diamnesion 110x51mm having system lumens output 110 lumen/ W CRI>80 CCT upto 6500K Beam Angle of 35 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 272 | ITEM No. 267 :- Supplying and erecting LED wall Max. 3 W wall Light having pressure die-cast aluminium housing polystyrene diffuser having system lumens output of Min. 770 Lumens min. efficacy of 110 lumen/ W CRI>80 CCT upto 6500K Beam Angle of 120 deg. max. ripple of 5% THD<10% p.f. >0.95 operating range of 120-270V surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 273 | ITEM No. 268 :- Supply erecting testing and commissioning of MAIN Light load LT PANEL. All MCCB fedder shall be With ON OFF and Trip Indication. All the components shall be housed in a common cubical made of 16 swg. M.S.sheet. The panel shall be powder coated of approved colour both inside and out side. The panel shall have both bottom and top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height with necessary accessories etc completed. Panel Shall be Indoor type With IP 43 Protection and Form-3b Sepration. Panel Shall Be As Per IEC 61439. As per CSR spacification (SW-MCB SW-MCCB SW-ACB CP-BB CP WG MA/ BW WG-MA CON) INCOMER- 400 A MCCB - 1 Nos 1 Sets of 630 Amps. Aluminium Bus bars with colour coded heat shrinkable PVC sleeves 1 Set of RYB indicating lamps with individual MCB's 1 Nos of Multifunction Meters. All Incomer shall be with surge protection. OUTGOING 100A FP MCCB - 08 Nos 63A FP MCB - 12 Nos. 32A FP MCB - 4 Nos. |
| 274 | ITEM No. 269 :- Supply erecting testing and commissioning of MAIN LT PANEL (1000 A ACB).All MCCB fedder shall be With ON OFF and Trip Indication.All the components shall be housed in a common cubical made of 16 swg. M.S.sheet.The panel shall be powder coated of approved colour both inside and out side.The panel shall have both bottom and top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height with necessary accessories etc completed.Panel Shall be Indoor type With IP 43 Protection and Form-3b Sepration.Panel Shall Be As Per IEC 61439.As per CSR spacification (SW-MCB SW-MCCB SW-ACB CP-BB CP WG MA/ BW WG-MA CON)INCOMER-1000 A ACB Drawout type - 1 Nos1 Sets of 1000 Amps. Aluminium Bus bars with colour coded heat shrinkable PVC sleeves 1 Set of RYB indicating lamps with individualMCB's 2 Nos of Multifunction Meters. All Incomer shall be with surge protection. OUTGOING 400A FP MCCB - 01 Nos 500 A FP MCCB -01 Nos |
| 275 | ITEM No. 270 :- Supply erecting testing and commissioning of MAIN HVAC LT PANEL.All MCCB fedder shall be With ON OFF and Trip Indication.All the components shall be housed in a common cubical made of 16 swg. M.S.sheet.The panel shall be powder coated of approved colour both inside and out side.The panel shall have both bottom and top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height with necessary accessories etc completed.Panel Shall be Indoor type With IP 43 Protection and Form-3b Sepration.Panel Shall Be As Per IEC 61439.As per CSR spacification (SW-MCB SW-MCCB SW-ACB CP-BB CP WG MA/ BW WG-MA CON)INCOMER-500 A FP MCCB (Shall Be Microprocessor based with LSIG Protection) - 1 Nos1 Sets of 500 Amps. Aluminium Bus bars with colour coded heat shrinkable PVC sleeves 1 Set of RYB indicating lamps with individualMCB's 1 Nos of Multifunction Meters. All Incomer shall be with surge protection.500A FP ATS - 01 NosOUTGOING250 A FP MCCB - 04 Nos |
| 276 | Sub Work II : External Electrification |
| 277 | ITEM No. 271 :- Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV |
| 278 | ITEM No. 272 :- Supplying and erecting integrated LED street light fitting 70-75W IP65 and IK08 class having single piece pressure die-cast aluminium housing having system lumens output of Min. 7700 Lumens min. efficacy of 110 lumen/ W CRI>70 CCT upto 6500K THD<10% p.f. >0.95 operating range of 140-270V inbuilt surge protection of 10 kV Life class of 50 000 Hrs. at L70B50 including driver complete with 3 Years warranty as per specification. |
| 279 | ITEM No. 273 :- Supplying and erecting integrated LED flood light fitting Max. 195W IP65 and IK07 class having pressure die-cast aluminium housing having system lumens output of Min. 23400 Lumens min. efficacy of 120 lumen/ W CRI>70 CCT upto 6500K THD<10% p.f. >0.90 operating range of 140-270V inbuilt surge protection of 4 kV Life class of 50 000 Hrs. at L70B50 including driver with U shaped bracket with 3 Years warranty as per specification. |
| 280 | ITEM No. 274 :- Supplying and erecting three phase 415V street light control panel up to the max load of 6kW TPN MCB 40A powder coated CRCA 14 SWG sheet outdoor type having IP54 IK10 protection suitable rating contactor 24 hrs. astronomical time switch with minimum 5 years battery back up auto/ manual selector switch ON/ OFF push buttons indicator lamps control wiring metering device etc. for automatic operation with overcurrent short circuit earth fault protection on provided iron frame / CC foundation. |
| 281 | ITEM No. 275 :- Supplying, erecting and marking SPMCB 0.5A to 5A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 282 | ITEM No. 276 :- Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi Hindi and English erected at position for HV/ EHV (11000 Volts) installation with compliance to IS 2551-1982 |
| 283 | ITEM No. 277 :- Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 284 | ITEM No. 278 :- Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 3x240V 50 Hz with optical and RS 232 port backlit LCD measure and display trivector energy load survey TOD tamper detection and logging power ON / OFF events instantaneous parameters of rating 1/ 5 A with display in absence of power complete with zero adjustment and test certificate from manufacturer erected on provided M.S. box and connected to CTs. |
| 285 | ITEM No. 279 :- Supplying, erecting, testing and commissioning of 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle painted with powder coating / epoxy paint of required shade copper bus bar size 25 x 6 mm heavy duty mechanical lock with counter meter for measuring no of times the opening of meter door top side cover (CT PT cover) interlock with meter door epoxy casted 3 nos. CT having required ratio between 50/ 5A to 200/ 5A VA 10 or 15 Class 0.2S epoxy casted 3 nos. PT having ratio 11000/ V3/ 110/ V3 VA 50 Class 0.2 suitable for provided trivector meter and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation. |
| 286 | ITEM No. 280 :- Supplying and erecting LT current transformer with bar primary 50/ 5 to 1000/ 5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. |
| 287 | ITEM No. 281 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 150 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 288 | ITEM No. 282 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 289 | ITEM No. 283 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½core 240 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 290 | ITEM No. 284 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 300 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 291 | ITEM No. 285 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 6 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 292 | ITEM No. 286 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 293 | ITEM No. 287 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 294 | ITEM No. 288 :- Supplying and laying (including excavation) of suitable width and depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/ road surface to required depth complete. |
| 295 | ITEM No. 289 :- Supplying and erecting FRP box of size 150mm x 125mm x 100 mm 2.7 mm thick complete on pole/ wall as per specification. |
| 296 | ITEM No. 290 :- Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/ m) with base plate in provided foundation as per specification. |
| 297 | ITEM No. 291 :- Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron made from high tensile structure grade steel as per BSEN - 10025 S 355/ E350 and 3mm thickness with base plate 25 mm thick x OD 520 mm grade as per IS-2062 pole made in single section and submerge arc welded with lowering and raising motorized unit wire rope stainless steel 316 grade 2 nos. 7x19 construction 5mm SG-DG U clamps double drum with assembly 250 kg 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box lightning arrestor arrangement for fixing aviation light high-mast with serial number factory inspection report/ test report of high-mast should be provided as per specifications on provided foundation J type stud/ bolts with necessary accessories complete as per specification. |
| 298 | ITEM No. 292 :- Providing and erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/ F top 100 mm A/ F on provided foundation as per specification. |
| 299 | ITEM No. 293 :- Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification. |
| 300 | ITEM No. 294 :- Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification. |
| 301 | ITEM No. 295 :- Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer 24hr astronomical time switch with minimum 5 years battery backup IP 54 and IK10 protection 25 A TP contactor for automatic switching of luminaires 2 no. 9A contactors and raise/ lower push button and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles self lock gasket and slanting top erected on CC foundation complete. |
| 302 | ITEM No. 296 :- Supplying and erecting V cross arm with ISM channel of 75x40x6mm for 11kV HT OH line with arrangement to fix insulator at 45mm from the end and horizontal distance between insulators 1220mm bent at angle of 60 degree keeping base 305mm and the total vertical height of V cross arm as 460mm and fixed on pole with MS clamp of 80x10 mm nut bolts washers complete as per specification. |
| 303 | ITEM No. 297 :- Supplying and erecting 75x40 x6mm with 4.4mm thick web and 7.3mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065mm for 11kV 1320mm for 22kV between insulators for erection of top pin insulators complete as per specification. |
| 304 | ITEM No. 298 :- Supplying and erecting bracket for guarding of HT OH Line made from channel iron 1600mm in length and 75x40x6mm. erected on pole complete as per specification. |
| 305 | ITEM No. 299 :- Supplying and erecting single pole cut point channel set of for 11kV HT OH line two channel of size 100x50x6mm 1.6m long having stud angle of size 50x50x6mm 1.5m long with necessary clamps nut bolts etc. complete as per drawing. |
| 306 | ITEM No. 300 :- Supplying and erecting end pole D. P. Structure for 11/ 0.415 kV 200 kVA Transformer with R.S.J. Pole 2 Nos. of size 100mm x 116 mm x 11 m Long with suitable Distribution Box of C.R.C.A. Sheet 16 SWG with 4 Pole MCCB 400 Amps as incomer and 6 Nos.200 Amps Kitkat / MCCB for out going circuits. Transformer D.P. Structure includes the A. B. Switch 200 Amps D.O. fuse Set and L.A. Set. 2 Nos. Top channel of size 100 mmx 50 mm for erection of A.B. Switch and 2 Nos. Base channel of size 100 mm x 50 x mm for erecting Transformer. Channel of size 75 x40 mm for erecting D.O. Fuse Set L.A. A.B. Switch handle etc. Angle of size 50 x 50 x6 mm for erecting Distribution Box Transformer Belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps Nut-bolts. V cross arm top clip insulators etc. complete with caution board and barbed wire. D.P. Structure shall be erected in c.c. foundation complete. |
| 307 | ITEM No. 301 :- Supplying and erecting ACSR conductor of size - 6/ 1-4.72 mm (Dog) complete. (394.00 kg/ km) as per specification. |
| 308 | ITEM No. 302 :- Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line complete as per specification. |
| 309 | ITEM No. 303 :- Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line complete as per specification. |
| 310 | ITEM No. 304 :- Supplying and erecting G.I. stay set for poles including loop insulators at inaccessible height with anchor plate 300x300x6 mm. straining screws G.l. stay wire 7/ 8 SWG G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. |
| 311 | ITEM No. 305 :- Supplying and erecting guarding lace for HT OH line with 8SWG G.l. wire to protect the HT OH line with binding wire of 20SWG G.l. wire for 75mm section on either side. |
| 312 | ITEM No. 306 :- Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing and recording the results as per specification. |
| 313 | ITEM No. 307 :- Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification. |
| 314 | ITEM No. 308 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and/ or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification. |
| 315 | ITEM No. 309 :- Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/ cable/ conduit with screws complete |
| 316 | ITEM No. 310 :- Supplying, installing, testing and commissioning of 3 phase 11/ 0.433 kV 50 Hz. 630 kVA Mineral oil immersed and naturally cooled outdoor type Copper wound Non-sealed transformer delta/ star connected additional neutral brought out on load side temperature rise should not exceed 45? by thermometer in oil and 50? by the resistance method in winding at full load rating using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5% having 7 number of tap positions with standard accessories complete with test certificate with losses below 1860 Watts at 50% load 5300 Watts at 100% load as per IS 1180 (part 1) 2014 with necessary permissions of Electrical Inspector as per specification. |
| 317 | ITEM No. 311 :- Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification. |
| 318 | ITEM No. 312 :- Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete. |
| 319 | ITEM No. 313 :- Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class GI pipe with angle iron supports chain link wire mesh (jali) complete supported on channel iron erected in foundation and painted complete as per specification. |
| 320 | ITEM No. 314 :- Supplying and erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/ kg.). |
| 321 | ITEM No. 315 :- Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for Diesel Generating Set of above 320 kVA up to 400 kVA capacity Three phase 415 Volts 50Hz A.C. with all standard features safeties etc as per specification. |
| 322 | ITEM No. 316 :- Supplying and erecting minimum Three and above star rated submersible pump set of 2.25 KW/ 3 HP with 415 V 50 c/ s AC supply suitable for 150 mm dia. borewell suitable for 120 to 475 LPM discharge at 36 to 10 m head and discharge and delivery Pipe of Size-50 mm diameter with a necessary H type clamps as per specification. |
| 323 | ITEM No. 317 :- Supplying and erecting minimum Three and above star rated submersible pump set suitable for erection on open well of 3.75 KW/ 5 HP with 415 V 50 c/ s. A.C. supply having delivery head from 43 to 11m and discharge from 120 to 840 litres. per minute and pipe of Suction 65mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification. |
| 324 | ITEM No. 318 :- Supplying and erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 325 | ITEM No. 319 :- Supplying and erecting automatic control panel for 3 Phase 415 volt A.C Submersible/ centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP S.P.P. Combined ammeter/ voltmeter phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing phase reversal phase imbalance etc. |
| 326 | ITEM No. 320 :- Making trench in soft soil having 0.9m depth and minimum 0.3 m width as per IS for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification. |
| 327 | ITEM No. 321 :- Making trench in hard murum/ Tar road having 0.9 m depth and minimum 0.3mtr width for laying provided cables of voltage range 3.3 kV to 11 kV complete as per specification. |
| 328 | ITEM No. 322 :- Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete. |
| 329 | ITEM No. 323 :- Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete. |
| 330 | ITEM No. 324 :- Making cement concrete foundation including excavation (60 x 60) cm x deep 1/ 6 of pole length in 1 3 6 cement concrete 20 x 25 mm stone metal 45 cm x 45 cm x 45 cm / 45 cm dia. x 45 cm. height plinth duly plastered with necessary curing and finishing complete. (for above 9 m poles) |
| 331 | ITEM No. 325 :- Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1 3 6 cement concrete (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay). |
| 332 | ITEM No. 326 :- Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/ sq.m at 1.5 m depth including supply of steel concrete excavation and fixing provided nut bolts with the help of template duly plastered as per design complete (for 6m to 8m high octagonal / conical GI pole). |
| 333 | ITEM No. 327 :- Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete as per specification. |
| 334 | ITEM No. 328 :- Supplying and erecting high density polythene pipe ISI mark 32 mm dia. suitable for pressure of 6 kg/ cm2 connected to jet/ submersible pump with required material complete. |
| 335 | ITEM No. 329 :- Supplying erecting testing and commissioning of diesel generating set with alternator of 400 kVA confirming to CPCB IV Plus emmision compliant with output continuous rating 3 Phase 415 V 50c/ s 0.8 p. f. A.C supply a totally enclosed |liquid cooled multi-in line cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 | hours along with standard accessories self-excited self regulated screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/ -5 % with performance class G2. Both the engine and alternator direct coupled on a | common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters switchgears indicators connected with suitable zires/ cables the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet sound absorbing material to restrict sound level up to 75 dB at 1.0 m with suitable capacity DEF tank provided with first Filling of oil diesel tank capacity not less than 40Ltr etc. on provided M20 Grade CC Foundation and obtaning necessary aproval from electrical inspector if necessary. This DG Set is fiited in sound prof and whether proof |Acoustic Enclosure asper CPCB IV plus emisison complaint. |
| 336 | Sub Work III : CCTV work |
| 337 | ITEM No. 330 :- Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/ floor with chiselling appropriately as per specification. |
| 338 | ITEM No. 331 :- Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/ false ceiling/ false flooring as per specification. |
| 339 | ITEM No. 332 :- Supplying and erecting 5m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/ female 19 pin HDMI connectors complete. |
| 340 | ITEM No. 333 :- Supplying and installing cat-6 cable suitable for networking as per specification. |
| 341 | ITEM No. 334 :- Supplying and installing armoured single mode optical fibre cable with 6 fiber core dia 50/ 125µm (OS1/ OS2) 10/ 40 GBPS speed in provided underground HDPE pipe complete. |
| 342 | ITEM No. 335 :- Supplying, fixing, and configuring 24 ports POE switch in provided rack as per specification. |
| 343 | ITEM No. 336 :- Supplying, installing and testing UTP connector (RJ-45) as per specification. |
| 344 | ITEM No. 337 :- Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification. |
| 345 | ITEM No. 338 :- Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification |
| 346 | ITEM No. 339 :- IR Bullet Camera (NON CSR) Supplying and erecting of High definition 4/ 5 Megapixel IP IR Bullet Camera withfollowing features4/ 5 MP Bullet Camera.1/ 2.7 or higher 4MP PS CMOS Image SensorMax. 4MP (2688 x 1520) 25fps or above / Max. 5MP (2880x1620) 25fps oraboveInstastream H.265 H.264 H.264H H.264B MJPEG Support Quad stream WDR(120dB) Day/ Night(ICR) 3D NR ROI AWB AGC BLC HLC DigitalwatermarkingIR Range of 30Mtr or above Warm Light Range of 30Mtr or above.3.6mm fixed Lens (2.8 mm 6 mm Optional)Support Starlight TechnologyMicro SD Card upto 256GB Supported PoE IP67 IK10ISO 9001 2015 ISO 20000?1 2018 CE FCC and RoHS BIS STQC ERCertificate duly erected on wall/ ceiling/ provided pole with all accessoriescomplete with 3 years warranty. |
| 347 | ITEM No. 340 :- Internal Surveillance HDD (NON CSR) Supplying and erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR interface transfer rate 6 GB/ S maximum sustained transfer rate 210 MB/ Sec to 213 MB/ S. Drive bay supported 08+ Cameras supported up to 64 Cache (MB) 256 Load/ Unload Cycle -3000000 Work Load Rating per Year 180TB MTBF 1000000 Hrs. HTTPS. RoHS UL CE certified duly erected in position in provided NVR as per specification no. CCTV-HDD(03 Years warrenty) |
| 348 | ITEM No. 341 :- Supplying and erecting 65 professional LED display with 1920 *1080 ( Full HD) Display suitable for 32/ 64 channel NVR and following features Brightness minimum 500 Cd/ m2 Contrast Ratio minimum 1000 1 Viewing angle 178/ 178 deg. Response time maximum 8 ms Inputs HDMI VGA BNC USB Audio In Built-in speakers maximum 10 W Suitable to operate on 100-240 V 50 Hz AC supply and 24/ 7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc.( 3 Years Warranty) |
| 349 | ITEM No. 342 :- Supplying installing testing and commissioning of 64/ 80 Ch Network Video Recorder (NVR) suitable connect Min. 64 IP Cameras up to 5 Megapixel Resolution with HDMI 1/ VGA 1 and HDMI 2/ VGA 2 outputs provided Atleast one HDMI output of 4K resolution atleast one VGA output with output up to 1920 × 1080 Support H.265 or higher H.264 MJPEG Supports Redundant Dual Power Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks ANR Technology 8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB minimum 02 USB port Alarm I/ O 16/ 4 RJ-45 10/ 100/ 1000 Mbps self-adaptive Ethernet interface support multi brand network Cameras ONVIF conformance Multiple network monitoring Web viewer . support protocol TCP/ IP DHCP DNS DDNS NTP SADP SMTP NFS iSCSI UPnP™ HTTPS. RoHS UL CE FCC certified.duly erected in provided U Rack with wiring connections tagging and programming etc. complete as per specificationss. |
| 350 | ITEM No. 343 :- Supply Installation Testing and Commissioning of All in One Computer For Factor - All-in-one Processor Type Core i5 Family Processor Spec 2.3 GHz Ram 8 GB Memory Technology DDR4 Computer Memory Type GDDR4 Hard Drive Size 1 TB Hard Disk Description HDD hard Drive Interface Serial ATA SSD 256 GB Additional Graphics Coprocessor Intel UHD Graphics 630 Graphics Chipset Standing Screen display Size 21.5 Inches Connectivity Type Bluetooth Wireless Type Bluetooth 801.11ac. Hardware Platform Windows Operating System Windows 10 Professional Warranty - 3 Year |
| 351 | Sub Work IV : 2 Nos of Electric Passenger Lift |
| 352 | ITEM No. 344 :- Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. |
| 353 | ITEM No. 345 :- Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 354 | ITEM No. 346 :- Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete. |
| 355 | ITEM No. 347 :- Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. |
| 356 | ITEM No. 348 :- Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens min. efficacy of 110 lumen/ W CRI>80 CCT upto 6500K Beam Angle of 120 deg. THD<10% p.f. >0.95 operating range of 140-260V in built surge protection of 2.5 kV Life class of 50 000 Hrs. at L70B50 including driver IP66 IK09 rated on provided PVC Block / wooden board with 3 years warranty. |
| 357 | ITEM No. 349 :- Supplying, erecting and marking SPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 358 | ITEM No. 350 :- Supplying, erecting and marking DPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 359 | ITEM No. 351 :- Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 360 | ITEM No. 352 :- Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification |
| 361 | ITEM No. 353 :- Supplying, Erecting and Commissioning of 2 pole RCCB 16/ 25A electromagnetic type with 30/ 100/ 300 mA sensitivity with earth leakage trip indication complete as per specification. |
| 362 | ITEM No. 354 :- Supplying, Erecting and Commissioning of 4 pole RCCB 40A electromagnetic type with 30/ 100/ 300 mA sensitivity with earth leakage trip indication complete as per specification. |
| 363 | ITEM No. 355 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 2 core 2.5 sq. mm. copper conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 364 | ITEM No. 356 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 16 sq. mm. copper conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 365 | ITEM No. 357 :- Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials testing and recording the results as per specification. |
| 366 | ITEM No. 358 :- Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/ cable/ conduit with screws complete. |
| 367 | ITEM No. 359 :-SITC of Electric Traction Passenger Lift with • Rated capacity - 10 Passenger/ 680 Kg • Floors - G+2 floor (3 Stops/ 3 Landings) • Travel - 3 to 4.2 mtrs• Location of Lift Machine - MR/ MRL • Rated speed - 1.0mps VS• Car/ Landing door clear opening of 800 mm wide x 2000 mm high• Clear Car size of 1300 mm wide x 1350 mm deep x 2250 mm high • Lift shaft available having clear size of 2286 mm wide x 2500 mm deep 2500 mm Pit depth 12000 mm Overhead. • Doors type - COPO/ TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/ frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).• Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm thick with hairline finish with frame made from MS girders bracing of adequate size with minimum safety factor of 5 with Toe Guard Apron with necessary false ceiling with adequate LED lights blower/ fan for ventilation and SS chequered plate flooring handrails mirror emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.• COP with SS face plate having metallic push buttons with Braille code and luminous indicator around button with FPI scrolling UP/ DN LED indicator and with / without attendant key switch OWD with audio-visual alarm VAS in Marathi Hindi and English with intercom system with telephone instrument in Lift car LMR and FCC/ ground floor.• LOP with SS face plate having recess/ surface push button box for all landings with scrolling UP/ DN LED indicator having metallic push buttons with Braille code and luminous indicator around button with CPI Lift car arrival and next travel direction audio-visual indication at all landings.• Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent overvoltage over speed overheat for all devices including lift motor and travel direction protection protection for phase loss at input or output etc. various operation modes such as maintenance change direction by attendant full load bypass VIP call operation self levelling operation call cancel facility auto return to home landing fireman evacuation operation earthquake operation door open/ close operation from COP etc. The system can record information for minimum 30 latest faults with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size and strength copper wire for power and control circuit with provision for addition of floor/ control card and allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. • ARD complete with necessary SMF VRLA batteries.• Fireman controller having fireman switch at fire Landing. • CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car and in LMR/ inside lift shaft top aimed on Lift machinery and controller with NVR kept in LMR/ FCC with HDR data backup for min. 90 days with min.18” FHD TV monitor to be kept in FCC/ LMR as directed by Engineer In Charge.• Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/ hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory) with Traction pulley OSG electromagnetic brakes entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/ diverter traction sheaves suspension wire ropes/ belts of adequate size and strength/ Machine room less.• Other mechanical parts such as 'T' section adequate size guide rails for car and counter weight with brackets fasteners counter weight frame with necessary blocks buffers with necessary support arrangement MS pit ladder etc. erected with necessary steel work.• Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill header hole pass etc complete with plaster finish civil work for erection buffers erection of lift machinery adequate size core cuts if required and scaffolding for erecting guide rails providing and fixing steel girders/ RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. • General - Job includes entire procedure of obtaining all necessary erection permissions and License to Work the Lift from Electrical Inspector(Lifts) with submission to the Engineer In Charge. • The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. (A) - 2 For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid (non-cladded) landing door [Two panel] this includes all necessary accessories like LOP's with UP/ DN buttons-arrows-indicators extension of guide rails shaft wiring with trunking traveling cables main hoisting ropes/ belts and OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete(B) - 1 For Lift travelling above First floor and up to Sixth floor(C) - 1 For additional 2MP Camera along with necessary accessories at Home Landing add as given. |
| 368 | Sub Work V : Fire Fighting and Fire Alarm System |
| 369 | ITEM No. 360 :- Supplying, installing, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 1800 to 2280 LPM at 80 to 60 m head driven by electric motor 415 volts 3 phase 50 Hz AC supply of 37kW or of suitable kW capacity for manual/ automatic operation and consisting of following (a) Horizontal type single stage centrifugal/ split casing pump of cast iron body and bronze impeller with stainless steel shaft(SS410 grade) mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor TEFC synchronous speed 3000 RPM suitable for operation with IP 55 protection for enclosure horizontal foot mounted type with Class-'F' insulation conforming to IS-325.(c) M.S. fabricated Common base plate coupling coupling guard foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification. |
| 370 | ITEM No. 361 :- Supplying, installing, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven by electric motor 415 volts 3 phase 50 Hz AC supply of 5.5 kW or of suitable kW capacity for manual/ automatic operation and consisting of following (a) Horizontal/ vertical type multi stage centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade) mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor TEFC synchronous speed 3000 RPM suitable for operation with IP 55 protection for enclosure horizontal foot mounted type with Class-'F' insulation conforming to IS-325. (c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification. |
| 371 | ITEM No. 362 :- Supplying, installing, testing and commissioning of main fire pump (MFP/ DP) suitable for water discharge of 1600 to 1800 LPM at 70 to 50 m head driven by 45 HP or suitable HP capacity diesel engine at required working speed suitable for manual/ automatic operation and consisting of following (a) Horizontal type single stage centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade) mechanical seal conforming to IS 1520.(b) Water cooled with radiator diesel engine conforming to relevant IS standard complete with auto starting mechanism 12/ 24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v 50Hz AC supply diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding residential silencer instruments and protection as per standard specification stop solenoid for auto stop in the event of fault with audio indications etc. as required.(c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification. |
| 372 | ITEM No. 363 :- Supplying, installing, testing and commissioning of fire pump control panel (FCP) of cubical construction floor mounted type fabricated from minimum 2 mm thick CRCA sheet compartmentalised with hinged lockable doors with enclosure protection class IP54 duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) cable alley interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories mountings and internal wiring with adequate size copper conductor cable earth terminals numbering etc. complete in all respect suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories wiring and cabling along with allied accessories with following incoming and outgoings suitable for automatic and manual operation on 415V 3 phase 50Hz ac supply as per specificationsthe capacity of electric motor driven pump are as followsa. Main fire pump(MFP) having capacity of 22kW 1no (1 working)b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby alternate run per start in auto mode) comprises of the following features and switchgears 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating.2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's starters and outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections mounted on required no of epoxy or porcelain support insulators of suitable ratings etc. 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating. 4. Digital voltmeter and ammeter and RYB indicating lamps and push buttons and SPP O/ L and phase reversal protection with emergency stop switch.5. TPN SPD 100kA Type 1 +2 tested.6. Required pressure transducer with pressure indication on panel with cabling required for monitoring and automatic operation of fire pumps.7. System controller to control operation of main electric fire pump jockey (pressurization) pumps in sequence with interlocking for operation of pumps as per specification with automatic/ manual operation with selector switch and alternate run of standby Pumps consisting of relays timers. sensors annunciation window for fault indication complete as per specification. 8.Suitable capacity electric motor starters for all individual pumps with necessary push buttons and indications.9. Siren of required capacity to be activated when main pump starts and allied accessories as per requirements of local CFO or as directed by engineer in charge.10. Danger board as per IS. 11. Spare HRC fuses minimum 2nos of each individual rating with required bakelite fuse holder for main and jockey fire pumps MFP=(1working) JP = (1working+1standby alternate run per start in auto mode) complete panel as per specification no. FF-MFP/ ECP (A) - For main electric motor driven fire hydrant system pump of 37 kW capacity &relevant capacity jockey pump add Rs. 26217 (D) - For addition of standby main diesel engine driven fire pump (1 standby) add as follows in the basic cost of Item no 13-5-1 towards required 12/ 24 vbattery charger and diesel engine starter along with necessary accessories indicators etc. with necessary interlocking and updation of control logic withinterlocking for operation of pumps MFP for main (1working+1standby mode)and jockey fire pumps (1working+1standby alternate run per start in auto mode) add Rs. 68381The control for diesel engine comprises of automatic/ manual selector switch and 3attempts starting device timers and relays as required push buttons start/ stop inmanual mode indicating lamp for high/ low Lub. oil pressure high water tempand engine on indication battery charger suitable for 12V/ 24 V DC with boostand trickle selector switch 0-30 V DC voltmeter and 0-20 A DC ammeter withall standard relays and accessories required for automatic operation of dieselengine with interlocking for operation of main fire pumps |
| 373 | ITEM No. 364 :- Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification. |
| 374 | ITEM No. 365 :- Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification. |
| 375 | ITEM No. 366 :- Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification. |
| 376 | ITEM No. 367 :- Supplying and erecting G.I. pipe ‘C’ class ERW 75/ 80 mm dia with necessary fittings complete as per specification. |
| 377 | ITEM No. 368 :- Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification. |
| 378 | ITEM No. 369 :- Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification. |
| 379 | ITEM No. 370 :- Providing coating of bitumen paint and 4mm thick wrapping for underground 150 mm ring main of fire fighting system. |
| 380 | ITEM No. 371 :- Supplying and erecting 150 mm dia cast iron foot valve ball type/ flap type with strainer for negative suction complete as per specification. |
| 381 | ITEM No. 372 :- Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern PN16 pressure rating SS screen end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification. |
| 382 | ITEM No. 373 :- Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating as per specification. |
| 383 | ITEM No. 374 :- Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification. |
| 384 | ITEM No. 375 :- Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating as per specification. |
| 385 | ITEM No. 376 :- Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification. |
| 386 | ITEM No. 377 :- Supplying gun metal double outlet hydrant valve fitted with necessary accessories complete as per specification. |
| 387 | ITEM No. 378 :- Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification. |
| 388 | ITEM No. 379 :- Supplying and erecting 63mm dia reinforced rubber lined (R.R.L.) hose pipe 15m in length fitted with necessary accessories complete as per specification. |
| 389 | ITEM No. 380 :- Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification. |
| 390 | ITEM No. 381 :- Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia for supplying water in fire tank complete as per specification. |
| 391 | ITEM No. 382 :- Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification. |
| 392 | ITEM No. 383 :- Supplying and erecting 20/ 25mm dia gun metal air release cock with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification. |
| 393 | ITEM No. 384 :- Supplying and erecting 100 mm dia. pressure gauge 0-300 PSI or 0-14 kg per cm square fitted with 12/ 15 mm dia. pad cock valve erected with provided G.I. pipe elbow etc. complete as per specification. |
| 394 | ITEM No. 385 :- Supplying and erecting 12/ 15 mm dia pressure switch with provided isolation valve G.I. nipple elbow etc complete as per specification. |
| 395 | ITEM No. 386 :- Supplying and erecting brass orifice plate having 6 mm. thickness 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification. |
| 396 | ITEM No. 387 :- Supplying and erecting brass orifice plate having 6 mm. thickness 160 mm outer dia with required diameter of inner hole at every double outlet hydrant valve as per specification. |
| 397 | ITEM No. 388 :- Supplying and erecting M.S./ CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8 x 6 ) and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) |
| 398 | ITEM No. 389 :- Supplying and erecting M.S./ CRCA cabinet for housing Floor Hydrant valve hose pipe hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8 x6 ) and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) |
| 399 | ITEM No. 390 :- Supplying, installing, testing and commissioning of beam smoke detector four wire single ended reflected type with 8 receiver having digital display for easy alignment adjustable sensitivity and heater kit for transmitter/ receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 5 to 70 m. |
| 400 | ITEM No. 391 :- Supplying, installing, testing and commissioning of FR XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification. |
| 401 | ITEM No. 392 :- Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop with on-board LCD display with min 16 lines of text operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition suitable provision for network connectivity interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908 2021 IS 2189 2008 EN 54 and VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty. |
| 402 | ITEM No. 393 :- Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/ fire alarm manual control keys for silence/ mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty. |
| 403 | ITEM No. 394 :- Supplying, installing, testing and commissioning of addressable optical smoke detector single/ twin LED’s with 360 degree view suitable for low voltage 15 to 32 V DC two wires supply in-built locking mechanism to check the removal and pilferage of the detector in built isolation mode start up current 300µA and alarm condition current shall be maximum 6.5 mA operating temperature 0°C to 50°C humidity 0-95% RH IP 41 conforming to IS 2189 2008 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty. |
| 404 | ITEM No. 395 :- Supplying, installing, testing and commissioning of ntelligent addressable thermal/ heat detector with rate of rise cum fixed temperature thermistor complete with base as required suitable for temperature variations from - 20°C to 38 °C for fixed-heat and rate-of-rise type detectors whereas 0°C to 90°C for high heat type detectors in built isolation mode suitable for industrial/ kitchen/ boiler room etc. with 3 years equipment replacement warranty IS 2175-1988 reaffirmed 2000 IS 15908 2021 standards. |
| 405 | ITEM No. 396 :- Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/ pull station type) made of addressable break glass plastic square in shape surface/ flush mounted with Break Glass massage embedded on the glass complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty. |
| 406 | ITEM No. 397 :- Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) 1982 Reed relays. |
| 407 | ITEM No. 398 :- Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908 2021 with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54 conforming to IS 2189 2008 IS 15908 2021 standards with 3 years equipment replacement warranty. |
| 408 | ITEM No. 399 :- Supplying, erecting, testing and commissioning of 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification. |
| 409 | ITEM No. 400 :- Supplying, erecting, testing and commissioning of 15 to 30 Watts sound column or ceiling mounted complete as per specification. |
| 410 | ITEM No. 401 :- Supplying, erecting, testing and commissioning of stand mounted/ handheld type wired microphone having 2 mV/ Pa sensitivity impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector stereo jack complete as per specification. |
| 411 | ITEM No. 402 :- Supplying, erecting, testing and commissioning of rust free microphone floor stand of chrome plating/ powder coating or S.S. material 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete. |
| 412 | ITEM No. 403 :- Supplying, erecting, testing and commissioning of rust free microphone table stand of chrome plating/ powder coating or S.S. material up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete. |
| 413 | ITEM No. 404 :- Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification. |
| 414 | ITEM No. 405 :- Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete. |
| 415 | ITEM No. 406 :- Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler 15 mm (½ ) dia. NBCM Body chrome finished 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification. |
| 416 | ITEM No. 407 :- Supplying, erecting, testing and commissioning of vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes. |
| 417 | ITEM No. 408 :- Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables pipes and cable support system in steel aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler as per specification. |
| 418 | ITEM No. 409 :- Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 / 15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut and bolts routed in wall complete. |
| 419 | ITEM No. 410 :- Supplying and erecting ABC Powder type fire Extinguisher as per IS 13849/ 15683 of 6 Kg. capacity with necessary clamp for erection on wall. |
| 420 | Sub Work VI : HVAC System |
| 421 | ITEM No. 411 :- Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places as per specification. |
| 422 | ITEM No. 412 :- Supplying and erecting co-axial copper cable low voltage grade tri-shielded RG-11 as per specification. |
| 423 | ITEM No. 413 :- Supplying, installing, testing and commissioning of split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V 50 Hz A.C. supply having 1 no of air handling unit hi-wall/ floor mounting type complete with refrigerant R32 having copper condenser minimum 2.5PM filter self diagnosis feature stabilizer free operation and temperature display on indoor unit noise level maximum 50dBA at position in provided recess with wooden frame complete specification. |
| 424 | ITEM No. 414 :- Supplying, installing, testing and commissioning of cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 1.8TR to 2.1TR capacity having ISEER minimum 5.00 suitable to operate on 250V 50 Hz A.C. supply having 1 no of air handling unit hi-wall/ floor mounting type complete with refrigerant R32/ R410A having copper condenser dust filter self diagnosis feature stabilizer free operation noise level maximum 50dBA at position as per specification. |
| 425 | ITEM No. 415 :- Supplying and erecting seamless outside and inside smooth dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/ size 16mm complete. |
| 426 | ITEM No. 416 :- Supplying and erecting seamless outside and inside smooth dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/ size 22mm complete. |
| 427 | ITEM No. 417 :- Providing vaccumising the airconditioner system to 200 micron and charging with refrigerant R32 for AC unit. |
| 428 | ITEM No. 418 :- Supplying, erecting, testing and commissioning of 18HP VRF/ VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/ suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/ VRV technology microprocessor based control compressor starter/ control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. |
| 429 | ITEM No. 419 :- Supplying, erecting, testing and commissioning of 24HP VRF/ VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/ suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/ VRV technology microprocessor based control compressor starter/ control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. |
| 430 | ITEM No. 420 :- Supplying, erecting, testing and commissioning of 26HP VRF/ VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/ suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/ VRV technology microprocessor based control compressor starter/ control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. |
| 431 | ITEM No. 421 :- Supplying and erecting circular flexible/ rigid PVC pipe duct of size 40mm dia 4mm thickness with required couplers reducers T-joints Y-joints elbows and necessary supports etc. with sealing with provided control/ air flow regulating valves/ dampers filters at position complete. |
| 432 | ITEM No. 422 :- Supplying and erecting circular flexible/ rigid PVC pipe duct of size 50mm dia 4mm thickness with required couplers reducers T-joints Y-joints elbows and necessary supports etc. with sealing with provided control/ air flow regulating valves/ dampers filters at position complete. |
| 433 | ITEM No. 423 :- Supplying, erecting, testing and commissioning of wireless remote control having colour LCD panel real time clock temperature limitation (16 to 30° C functions like filter clean reminder timer suitable to communicate with wired controller complete. |
| 434 | ITEM No. 424 :- Supplying, erecting, testing and commissioning of centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel yearly schedule power proportional distribution function temperature limitation history function complete erected on wall integrated with provided fire alarm system. |
| 435 | ITEM No. 425 :- Supplying, erecting, testing and commissioning of manually operated opposed blade duct mounted flanged volume control dampers of required sizes in GI construction with operating mechanism mounting arrangement rubber refrigerant kits etc. complete. |
| 436 | ITEM No. 426 :- Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/ dampers/ ducting of suitable size with fire resist flexible double canvas sleeve complete. |
| 437 | ITEM No. 427 :- Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2017. |
| 438 | ITEM No. 428 :- Providing and applying of acoustic insulation for air ducts with 25mm thick 48 kg/ cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete. |
| 439 | ITEM No. 429 :- Supplying and erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete. |
| 440 | ITEM No. 430 :- Supplying and installing of high pressure grade required size copper connection Y or T- Joints/ refnet complete erected on wall/ ceiling with supports/ raceways Nitrile rubber insulation painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/ VRF air conditioning system. |
| 441 | ITEM No. 431 :- Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/ 30/ 45°. |
| 442 | ITEM No. 432 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 443 | ITEM No. 433 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 444 | ITEM No. 434 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 445 | ITEM No. 435 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiation with OEM standards of VRV/ VRF air conditioning system complete. |
| 446 | ITEM No. 436 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 447 | ITEM No. 437 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 448 | ITEM No. 438 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 449 | ITEM No. 439 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 450 | ITEM No. 440 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 451 | ITEM No. 441 :- Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/ suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/ VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/ VRF air conditioning system complete. |
| 452 | ITEM No. 442 :- Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater/ AC system. |
| 453 | ITEM No. 443 :- Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/ AC system. |
| 454 | ITEM No. 444 :- Supplying, erecting and marking SPMCB 6A to 32A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 455 | ITEM No. 445 :- Supplying, erecting and marking TPMCB 6A to 32A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 456 | ITEM No. 446 :- Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification. |
| 457 | ITEM No. 447 :- Supplying and erecting triple pole and neutral distribution board (TPNDB) SPMCB of 4 ways/ phase (12 poles) with door 1.2mm thickness surface/ flush mounted IP 43 protection on iron/ GI frame (horizontal busbar type) as per specification. |
| 458 | ITEM No. 448 :- Supplying and erecting triple pole and neutral distribution board (TPNDB) 3 pole/ 4 pole MCCB as incomer and outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles) with door 1.2mm thickness surface/ flush mounted on iron/ GI frame (vertical busbar type) as per specification. |
| 459 | ITEM No. 449 :- Providing and erecting 4 Pole MCCB 415V 250A rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure/ panel as per specification. |
| 460 | ITEM No. 450 :- Providing and erecting floor/ wall mounting MCCB panel board with door suitable for four pole incoming 250A 8 ways Four pole outgoing up to 100 A MCCBs on iron frame as per specification. |
| 461 | ITEM No. 451 :- Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB. |
| 462 | ITEM No. 452 :- Providing and erecting prewired meter module suitable for MCCB panel board with CTs and emfs VIF meter. |
| 463 | ITEM No. 453 :- Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. |
| 464 | ITEM No. 454 :- Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. |
| 465 | ITEM No. 455 :- Supplying and erecting GI sheet 1 mm (20 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. |
| 466 | ITEM No. 456 :- Supplying and erecting GI sheet 1.25 mm (18 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. |
| 467 | ITEM No. 457 :- Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 468 | ITEM No. 458 :- Supplying and erecting panel mounting type digital ammeter having three and half digit LED display external CT operated calibrated for suitable to operate on 500V 0 to 1000A having accuracy class of 0.5 AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 469 | ITEM No. 459 :- Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 470 | ITEM No. 460 :- Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green 230 / 250V on provided box / panel with necessary material wiring and connections etcetera. |
| 471 | ITEM No. 461 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. copper conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 472 | ITEM No. 462 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 16 sq. mm. copper conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 473 | ITEM No. 463 :- Providing and erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 2.5 to 16 sq mm. with necessary material as per specification. |
| 474 | ITEM No. 464 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width and 75 mm height complete with necessary coupler plates and hardware. |
| 475 | ITEM No. 465 :- Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width and 75 mm height complete with necessary coupler plates and hardware. |
| 476 | ITEM No. 466 :- FLOOR MOUNTED AHU- VRF OUTDOOR UNIT 16000cfma) Supply Installation testing and Commissioning of Factory built Horizontal Air Handling Units (AHUs). AHU shall be provided with mixing box filter section DX-coil section Plug fan with VFD section Fresh air connection with damper limit switch drain connections stainless steel (18G) drain pan with Nitrile rubber insulation 19 mm thick auto purge valve drain valve wherever required. etc. conforming to specifications with all the necessary mounting accessories as required for complete installation include Lifting shifting assemblling and positioning of the equipment comprising of the following and complete as per specification/ drawingsb). Unit must in Double skin type with Extruded Aluminium profile having thermal break and complete with Set of Direct Driven Plug fans min 48±2 mm thick panels consisting of GI casing of thickness 0.8mm pre-plasticized outside and 0.8 mm non coated inside layer with factory injected PUF (density-40 kg/ m3) between them.c). AHU fan capacity shall be selected at 100% of fan speed unit outlet velocity should not exceeding 2000 FPM and min fan efficiency preferrably should be 70% and in case if 70% is not achievable Fans should be selected for maximum possible efficiency. Max. noise level of unit shall be 75 dBA at 1.5 meterd). Fan shall be backward curved direct driven Plug fans. Motor shall be IE-3 suitable for 415 +10% 50 Hz 3 Phase AC supply.The Fan must be selected for minimum power consuption and Maximum efficiency at respective duty point.e). AHU shall be provided with seperate wall mounted electrical panel of 415+10% 50 Hz 3 Phase AC supply for power supply distribution for equipment listed below with all necessary VFD's power and control circuit breakers auto/ manual selector switches earthing and internal power and control cabling terminations with necessary lugs and glands etc. - Incomer MCCB/ MCB of suitable electrical rating- - PLC for VFD Fan control ( For Sufficient DI/ DO as per Numbers of fan Configuration )- SMPS with Transformer for power supply of PLC- Individual outgoing feeders of suitable rating for fans for AHU Comminication Kit ODU Feeder's with ELMCB as per VRF OEM 2 spares feeders with 10amps rating The panel shall be of min. IP54 protection and must have arrangmnet to receive BMS and fire signal input.(Note - Single point power supply and BMS connectivity shall be done by external agency. f) Filter sections with velocity less than equal to 500 FPM. - Fresh Air Port - G4/ - 90% Down to 10 Micron (Washeble)- Combination Filter - G4+F7 - 90% Down to 10 Micron (Washeble) and 99% Down to 3 Micron (Dispposable)- Commissioning Filters (Disposable) also to be provided.g). Minimum 6 row deep cooling Dx-coil with hydrophilic coating and SS End Plates - Material of Tube - Copper i). AHU shall have Provided with the following- DP switch across all filters and Coil.- Return air teperature sensor.(Note - Contractor shall coordinate with IBMS contractor for nessesories provision to be made in AHU's.)j). Fan Static Indicated below are tentative and Contractor shall submit Fan static calculations based on approved shop drawings and as per actual site condition before ordering the unit. Any rise in static required shall be offer by contractor without any additional cost.1) 16000 CFM Supply / 40.0 TR / Total Static- 95 mm |
| 477 | ITEM No. 467 :-FLOOR MOUNTED AHU- VRF OUTDOOR UNIT 8000cfma) Supply Installation testing and Commissioning of Factory built Horizontal Air Handling Units (AHUs). AHU shall be provided with mixing box filter section DX-coil section Plug fan with VFD section Fresh air connection with damper limit switch drain connections stainless steel (18G) drain pan with Nitrile rubber insulation 19 mm thick auto purge valve drain valve wherever required. etc. conforming to specifications with all the necessary mounting accessories as required for complete installation include Lifting shifting assemblling and positioning of the equipment comprising of the following and complete as per specification/ drawingsb). Unit must in Double skin type with Extruded Aluminium profile having thermal break and complete with Set of Direct Driven Plug fans min 48±2 mm thick panels consisting of GI casing of thickness 0.8mm pre-plasticized outside and 0.8 mm non coated inside layer with factory injected PUF (density-40 kg/ m3) between them.c). AHU fan capacity shall be selected at 100% of fan speed unit outlet velocity should not exceeding 2000 FPM and min fan efficiency preferrably should be 70% and in case if 70% is not achievable Fans should be selected for maximum possible efficiency. Max. noise level of unit shall be 75 dBA at 1.5 meterd). Fan shall be backward curved direct driven Plug fans. Motor shall be IE-3 suitable for 415 +10% 50 Hz 3 Phase AC supply.The Fan must be selected for minimum power consuption and Maximum efficiency at respective duty point.e). AHU shall be provided with seperate wall mounted electrical panel of 415+10% 50 Hz 3 Phase AC supply for power supply distribution for equipment listed below with all necessary VFD's power and control circuit breakers auto/ manual selector switches earthing and internal power and control cabling terminations with necessary lugs and glands etc. - Incomer MCCB/ MCB of suitable electrical rating- - PLC for VFD Fan control ( For Sufficient DI/ DO as per Numbers of fan Configuration )- SMPS with Transformer for power supply of PLC- Individual outgoing feeders of suitable rating for fans for AHU Comminication Kit ODU Feeder's with ELMCB as per VRF OEM 2 spares feeders with 10amps rating The panel shall be of min. IP54 protection and must have arrangmnet to receive BMS and fire signal input.(Note - Single point power supply and BMS connectivity shall be done by external agency. f) Filter sections with velocity less than equal to 500 FPM. - Fresh Air Port - G4/ - 90% Down to 10 Micron (Washeble)- Combination Filter - G4+F7 - 90% Down to 10 Micron (Washeble) and 99% Down to 3 Micron (Dispposable)- Commissioning Filters (Disposable) also to be provided.g). Minimum 6 row deep cooling Dx-coil with hydrophilic coating and SS End Plates - Material of Tube - Copper i). AHU shall have Provided with the following- DP switch across all filters and Coil.- Return air teperature sensor.(Note - Contractor shall coordinate with IBMS contractor for nessesories provision to be made in AHU's.)j). Fan Static Indicated below are tentative and Contractor shall submit Fan static calculations based on approved shop drawings and as per actual site condition before ordering the unit. Any rise in static required shall be offer by contractor without any additional cost.1) 8000 CFM Supply / 20.0 TR / Total Static- 95 mm |
| 478 | ITEM No. 468 :- Split Ductable Unit Supply Installation testing and Commissioning of 4 Star BEE rating (nominal capacity) Air-cooled inverter type split type Ductable AC unit along with indoor/ outdoor units with stands refrigerent type R-410a or R-32 controls suitable to operate on 230 Volts 50 Hz AC supply etc. complete as required under Quoted price shall include cost of BMS compatible wires controller cooling thermostat Wahseble filter Drain pump and Pan refrigerant filling. As per technical specifications with all the necessary mounting accessories as required for complete installation. 11 TR - Ductable Unit |
| 479 | ITEM No. 469 :- INLINE Fans a). Supply Installation testing and Commissioning of following capacities of Direct Driven Round ducted inline fan with AMCA certified (AMCA certification requird for Air Performance and Sound) as per specification and complete with suitable 1 phase Motor l bird screen. etc. and required for complete installation include Lifting shifting assemblling and positioning of the equipment comprising of the following and complete as per specification/ drawings.The Fan must be selected for minimum power consuption and Maximum efficiancy at respective duty point.The fan casing shall be made of galvanised steel casing with min. 200 GSM zinc coating.Max. noise level shall be 78 dBA at 3.0 meterb). Fan Static Indicated below are tentative Contractor shall submit Fan static calculations based on approved shop drawings before ordering the unit. Any rise in static required shall be offer by contractor without any additional cost. 400 cfm 12.5mm wc static |
| 480 | ITEM No. 470 :- Cabinet Type Cabinet Centrifugal Fan 1000cfm a). Supply Installation testing and Commissioning of Direct Driven Cabinet type Centrifugal Fans for Fresh Air / Exhaust Air System complete with DIDW Backward Curved blower fan assembly shall be AMCA certified (AMCA certification requird for Air Performance and Sound) complete with suitable 1 phase Motor with 3 speed control bird screen and totally enclosed provided with class F insulation and of approved make. Unit shall have MS channel base housing V-belt drive comprising of fan and motor pulleys and one set of belts slide rails belt protection guard vibration isolators and bird screen required for complete installation include Lifting shifting assemblling and positioning of the equipment comprising of the following. b). Fan shall be provided with TEFC Sq.cage direct driven 'F' Class induction motor with minimum IE-3 rating suitable for 415V±10% 50 Hz. 3 phase electric supply. outlet velocity less than 2550 FPM and capacities shall be as follows. The Fan must be selected for minimum power consuption and Maximum efficiancy at respective duty point. Max. noise level shall be 78 dBA at 3 meter in hemispherical reverberant room condition. 1) 1000 CFM 60 mm Static. |
| 481 | ITEM No. 471 :- Cabinet Type Cabinet Centrifugal Fan 1000cfm a). Supply Installation testing and Commissioning of Direct Driven Cabinet type Centrifugal Fans for Fresh Air / Exhaust Air System complete with DIDW Backward Curved blower fan assembly shall be AMCA certified (AMCA certification requird for Air Performance and Sound) complete with suitable 1 phase Motor with 3 speed control bird screen and totally enclosed provided with class F insulation and of approved make. Unit shall have MS channel base housing V-belt drive comprising of fan and motor pulleys and one set of belts slide rails belt protection guard vibration isolators and bird screen required for complete installation include Lifting shifting assemblling and positioning of the equipment comprising of the following. b). Fan shall be provided with TEFC Sq.cage direct driven 'F' Class induction motor with minimum IE-3 rating suitable for 415V±10% 50 Hz. 3 phase electric supply. outlet velocity less than 2550 FPM and capacities shall be as follows. The Fan must be selected for minimum power consuption and Maximum efficiancy at respective duty point. Max. noise level shall be 78 dBA at 3 meter in hemispherical reverberant room condition. 1) 1000 CFM 60 mm Static. |
| 482 | ITEM No. 472 :- Cabinet Type Cabinet Centrifugal Fan 1500cfm a). Supply Installation testing and Commissioning of Direct Driven Cabinet type Centrifugal Fans for Fresh Air / Exhaust Air System complete with DIDW Backward Curved blower fan assembly shall be AMCA certified (AMCA certification requird for Air Performance and Sound) complete with suitable 1 phase Motor with 3 speed control bird screen and totally enclosed provided with class F insulation and of approved make. Unit shall have MS channel base housing V-belt drive comprising of fan and motor pulleys and one set of belts slide rails belt protection guard vibration isolators and bird screen required for complete installation include Lifting shifting assemblling and positioning of the equipment comprising of the following. b). Fan shall be provided with TEFC Sq.cage direct driven 'F' Class induction motor with minimum IE-3 rating suitable for 415V±10% 50 Hz. 3 phase electric supply. outlet velocity less than 2550 FPM and capacities shall be as follows. The Fan must be selected for minimum power consuption and Maximum efficiancy at respective duty point. Max. noise level shall be 78 dBA at 3 meter in hemispherical reverberant room condition. 1) 1500 CFM 60 mm Static |
| 483 | ITEM No. 473 :- ITEM No. 473 :- TUBE AXIAL / VANE FANS Supply Installation testing and commissioning of approved make of AMCA certified for sound and air Long case Tube Axial fan complete with suitable motor (as the case may be based on duty conditions and other requirements) suitable for operating on 3 phase electric supply 415+/ -10% volts 50 Hz cycles. The fan shall be complete with all accessories including hanging arrangement suitable for wall mounted / ceiling suspended Factory fabricated MS square flanges on suction and Discharge side OR factory fabricated inlet and outlet round to square cone (Bird screen to be installed on the open side of the Fan if it is not connected to either duct or Attenuator) installation including vibration isolation (Spring type) as specified in the ventilation fan schedule for ventilation smoke Spill or pressurization duty. The fan shall be supplied with a suitable 3 phase motor as mentioned in Ventilation Fan schedule. The motor shall be class F in case of Fresh Air / pressurisation and class-H incase of exhaust / smoke Spill duty suitably rated to handle high temperature (250 Deg C as per BS-7346 Part-2 1090]) of smoke (class -H) . Motor shall be VFD compatible. Sound lvl shall not be more than 75 DBA from 3.0 meter from fan for Basement ventilation fans and 75 DBA at 3 mtr for pressurization / Emergency fans.All fans shall be either suspended with Fully threaded GI rod of dia not less than 16mm with Vibration spring isolator OR Floor mounted with MS structure 75x40mm C channel . No gripple wire or round rod to be used.All fan to have external terminal boxes.All Fans shall be capable of accommodating static pressure variation +/ - 10% with no objectionable operating characteristics.Supply install callibrate test and commission CO sensor to control speed (RPM) of ventilation fan for basement ventilation of approved make and specification.Supply install callibrate test and commission PLC based control panel with logic controllers to control speed of jet fans - Cost for the same must be included in this line item with all required cable's termination Cable tray's and cover etc complete in all respect.Contractor to include the cost of vibration isolating devices (spring type as specified). Manufacturer / Contractor to furnish sound data of the fan and its paired sound attenuator in question in the prescribed format appended to this document. Cost of any equipments / devices (Pressure sensors vortex tube etc.) required to establish the performance of the pressurization fans as per design to be included). Noise criteria mentioned above are without sound attenuator.BASEMENT CAR PARKING VENTILATIONNormal Exhaust Air Fans (IE2 Class-H motor rated for 250 DegC for 2 Hours with minimum efficiency and static criterion as mentioned in Ventilation Fan Schedule for Fan Tag No.( Basement Car Parking) with Hot dip galvanised bird screen wherever it is open and not connected to duct. Cost of bird screen.1) 10100 CFM - 50 MM Static for Exhaust. |
| 484 | ITEM No. 474 :- TUBE AXIAL / VANE FANSSupply Installation testing and commissioning of approved make of AMCA certified for sound and air Long case Tube Axial fan complete with suitable motor (as the case may be based on duty conditions and other requirements) suitable for operating on 3 phase electric supply 415+/ -10% volts 50 Hz cycles. The fan shall be complete with all accessories including hanging arrangement suitable for wall mounted / ceiling suspended Factory fabricated MS square flanges on suction and Discharge side OR factory fabricated inlet and outlet round to square cone (Bird screen to be installed on the open side of the Fan if it is not connected to either duct or Attenuator) installation including vibration isolation (Spring type) as specified in the ventilation fan schedule for ventilation smoke Spill or pressurization duty. The fan shall be supplied with a suitable 3 phase motor as mentioned in Ventilation Fan schedule. The motor shall be class F in case of Fresh Air / pressurisation and class-H incase of exhaust / smoke Spill duty suitably rated to handle high temperature (250 Deg C as per BS-7346 Part-2 1090]) of smoke (class -H) . Motor shall be VFD compatible. Sound lvl shall not be more than 75 DBA from 3.0 meter from fan for Basement ventilation fans and 75 DBA at 3 mtr for pressurization / Emergency fans.All fans shall be either suspended with Fully threaded GI rod of dia not less than 16mm with Vibration spring isolator OR Floor mounted with MS structure 75x40mm C channel . No gripple wire or round rod to be used.All fan to have external terminal boxes.All Fans shall be capable of accommodating static pressure variation +/ - 10% with no objectionable operating characteristics.Supply install callibrate test and commission CO sensor to control speed (RPM) of ventilation fan for basement ventilation of approved make and specification.Supply install callibrate test and commission PLC based control panel with logic controllers to control speed of jet fans - Cost for the same must be included in this line item with all required cable's termination Cable tray's and cover etc complete in all respect.Contractor to include the cost of vibration isolating devices (spring type as specified). Manufacturer / Contractor to furnish sound data of the fan and its paired sound attenuator in question in the prescribed format appended to this document. Cost of any equipments / devices (Pressure sensors vortex tube etc.) required to establish the performance of the pressurization fans as per design to be included). Noise criteria mentioned above are without sound attenuator.BASEMENT CAR PARKING VENTILATIONNormal Exhaust Air Fans (IE2 Class-H motor rated for 250 DegC for 2 Hours with minimum efficiency and static criterion as mentioned in Ventilation Fan Schedule for Fan Tag No.( Basement Car Parking) with Hot dip galvanised bird screen wherever it is open and not connected to duct. Cost of bird screen.1) 10100 CFM - 50 MM Static for Fresh |
| 485 | ITEM No. 475 :- DUAL SPEED JET FANSSupply installation testing and commissioning of DUAL SPEED JET FANS(Impulse type or Induction type) including motor driveset starter panels Sound attenuators at inlet and outlet vibration isolators etc. casing shall be suitable for smoke exhaust application. Motor shall be mounted Inside and shall have fire rating of 250°C for 2 hours.Fans shall be suitable for rating as per ISO-1940/ AMCA 204-3. All motors shall be IE-3 class or better suitable for 415 V +/ - 10% volts three phase 50cycle AC supply as per specifications. Fan and motor shall be fire rated as specified in the spec) (Exact quantities for jet fans and their locations shall be decided based on CFD Analysis by Vendor.The accessories along with the fan shall include Mounting Feet• Impeller and Motor Side Guards• Two Silencers of length 710 mm (Minimum) with or without pod• 2 speed switch • Air Operated Dampers• Matching Flanges• Bellmouth Inlets• Flexible ConnectorsFans shall be activated from the Car park ventilation PLC panel.Exact quantity of jet fans shall be ascertained by CFD analysis.2525-5050 CFM -50 MM Static |
| 486 | ITEM No. 476 :- DOMESTIC PVC EXHAUST FAN Supply Installation testing PVC type Domestic Exhaust fan with PVC louver. The Fan must be suitable for toilet window frame. Frame provison shall be made by civil team. Size 250x250 mm |
| 487 | ITEM No. 477 :- Supply Installation testing and Commissioning of Aspen Make drain pump for Hi wall Unit |
| 488 | ITEM No. 478 :- Sequential Controller - Supply and installation of Programmable Logic controller including timer contactor as required with auto/ manual selector switch push button indicating lamp etc. The controller should automatically start and stop the Airconditioning unit. To Control - 1 Working + 1 Standby |
| 489 | ITEM No. 479 :- Protective Coating for Cu Pipe : Supply and fixing of Mechanical + UV protective coating for Exposed copper piping insulation with 1 layer of glass cloth and UV paint. . The covering shall be provided with min 6-7 mil thickness and 200 gram/ sqmt (±10%) interwoven glass fabric |
| 490 | ITEM No. 480 :- FACTORY FABRICATED DUCTING - ROUND DUCTSupply Installation and Testing of factory fabricated and factory internally insulated GSS (class VIII-120GSM Zinc Coating) Round spiral ducting complete with vanes hanging arrangement including fully threaded GI rods GI cleats and GI C channels/ wire rope supports etc. in accordance with the approved shop drawings and specifications. Quoted price shall be inclusive of necessary scaffolding charges towards installation of ducts outside or within building wherever required. Ducts shall be designed fabricated and flanged as per IS-655 for static pressure upto 65mm WG. In case static pressure is more than 65 mm WG SMACNA code shall be followed for design and fabrication of duct.1) GI sheet 0.8 mm (22 SWG) - 500 mm and 1000 mmt |
| 491 | ITEM No. 481 :- FACTORY FABRICATED DUCTING - ROUND DUCT Supply Installation and Testing of factory fabricated and factory internally insulated GSS (class VIII-120GSM ZincCoating) Round spiral ducting complete with vanes hanging arrangement including fully threaded GI rods GI cleats and GI C channels/ wire rope supports etc. in accordance with the approved shop drawings and specifications. Quotedprice shall be inclusive of necessary scaffolding charges towards installation of ducts outside or within building wherever required. Ducts shall be designed fabricated and flanged as per IS-655 for static pressure upto 65mm WG. In case static pressure is more than 65 mm WG SMACNA code shall be followed for design andfabrication of duct.1) GI sheet 1.0 mm (22 SWG) - 501 mm and 1250 mm |
| 492 | ITEM No. 482 :- FACTORY FABRICATED DUCTING - ROUND DUCT Supply Installation and Testing of factory fabricated and factory internally insulated GSS (class VIII-120GSM ZincCoating) Round spiral ducting complete with vanes hanging arrangement including fully threaded GI rods GI cleats and GI C channels/ wire rope supports etc. in accordance with the approved shop drawings and specifications. Quotedprice shall be inclusive of necessary scaffolding charges towards installation of ducts outside or within building wherever required. Ducts shall be designed fabricated and flanged as per IS-655 for static pressure upto 65mm WG. In case static pressure is more than 65 mm WG SMACNA code shall be followed for design andfabrication of duct.1) GI sheet 1.25 mm (22 SWG) - 1251 mm and above |
| 493 | ITEM No. 483 :- FACTORY FABRICATED DUCTING - FLAT OVAL DUCT : Supply Installation and Testing of factory fabricated and factory internally insulated GSS (class VIII-120GSM ZincCoating) Flat Oval Spiral ducting complete with vanes hanging arrangement including fully threaded GI rods GI cleats and GI C channels/ wire rope supports etc. in accordance with the approved shop drawings and specifications. Quotedprice shall be inclusive of necessary scaffolding charges towards installation of ducts outside or within building wherever required. Ducts shall be designed fabricated and flanged as per IS-655 for static pressure upto 65mm WG. In case static pressure is more than 65 mm WG SMACNA code shall be followed for design andfabrication of duct.1) Thickness 1.25 mm sheet - 2201 to above |
| 494 | ITEM No. 484 :- FACTORY FABRICATED DUCTING - FLAT OVAL DUCT Supply Installation and Testing of factory fabricated and factory internally insulated GSS (class VIII-120GSM ZincCoating) Flat Oval Spiral ducting complete with vanes hanging arrangement including fully threaded GI rods GI cleats and GI C channels/ wire rope supports etc. in accordance with the approved shop drawings and specifications. Quotedprice shall be inclusive of necessary scaffolding charges towards installation of ducts outside or within building wherever required. Ducts shall be designed fabricated and flanged as per IS-655 for static pressure upto 65mm WG. In case static pressure is more than 65 mm WG SMACNA code shall be followed for design andfabrication of duct. 1) Thickness 0.80 mm sheet - 0 to 1500 mm |
| 495 | ITEM No. 485 :- FACTORY FABRICATED DUCTING - FLAT OVAL DUCT : Supply Installation and Testing of factory fabricated and factory internally insulated GSS (class VIII-120GSM Zinc Coating) Flat Oval Spiral ducting complete with vanes hanging arrangement including fully threaded GI rods GI cleats and GI C channels/ wire rope supports etc. in accordance with the approved shop drawings and specifications. Quotedprice shall be inclusive of necessary scaffolding charges towards installation of ducts outside or within building wherever required. Ducts shall be designed fabricated and flanged as per IS-655 for static pressure upto 65mm WG. In case static pressure is more than 65 mm WG SMACNA code shall be followed for design andfabrication of duct. 1) Thickness 1.00 mm sheet - 1501 to 2200 mm |
| 496 | ITEM No. 486 :- For AHU Rooma) A 610x610 mm frame work of 25mm x50mm x 50mm x50mm x25mm shape channel madeof 0.6mm thick G.S.S. shall be fixed to walls leaving 610mm from floor by means of rawplugs in walls and dash fasteners in ceiling. Similar frame work shall also be fixed on ceiling bymeans of dash fasteners.b) Resin bonded glass wool/ mineral wool as specified cut to size will be friction fitted in theframe work and covered with tissue paper.c) Aluminium perforated sheet having perforation between 20-40%of thickness not lessthan 0.8mm shall be fixed over the entire surface neatly without causing sag / depression inbetween and held with screws. Sheet joints should overlap minimum 10mm.d) Aluminimum beading of 25mm wide and thickness not less than 1.00mm shall be fixed onall horizontal/ vertical joints by means of screws. Complete in all respect. |
| 497 | ITEM No. 487 :- Providing adhesive thermal insulation for supply/ return air duct with 13mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC- 2007. (For Return Air ) |
| 498 | ITEM No. 488 :- Providing adhesive thermal insulation for supply/ return air duct with 25mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC- 2007. (For Exposed Supply and Return Air. |
| 499 | ITEM No. 489 :- Supply installation testing and commissioning of Non- Return type GI duct damper complete with neoprene rubber gaskets nuts bolts screws linkages flanges etc as per specifications. |
| 500 | ITEM No. 490 :- Supplying and fixing of powder coated extruded aluminium Supply Air Jet Nozzle as per approved shade with aluminium butterfly dampers as per specifications. Diameter 450MM |
| 501 | ITEM No. 491 :- Supplying and fixing of powder coated extruded aluminium Supply Air Jet Nozzle as per approved shade with aluminium butterfly dampers as per specifications. Diameter 350MM |
| 502 | ITEM No. 492 :- Supplying and fixing of powder coated extruded aluminium Supply Air Jet Nozzle as per approved shade with aluminium butterfly dampers as per specifications. Diameter 250MM |
| 503 | ITEM No. 493 :- Louvers Supply Installing testing and comissioning of Powder coated extruded aluminium construction fresh air/ Exhaust air louvers with min. 60 % free area bird screen and volume damper as per specifications. Louvers need to be suitable in order to avoid rain water entry 45 degree deflection.As per technical specifications with all the necessary mounting accessories as required for complete installation. Colour Approval shall be obtained from Interior consultant. As per specification/ drawings. |
| 504 | ITEM No. 494 :- Supply and Installation of Wall Mounted/ Floor Mounted AHU Starter panel CRCA sheet metal enclosure 1.6mm thickness powder-coated RAL 7035 IP54 or IP55 protection bottom gland plate. The main Incomer 3-Pole 32A MCCB 16kA breaking capacity. The Panel must have interlock function for Fire Alarm Interlock potential-free contact terminals VFD / BMS Enable relay terminals. Power Connector 3-Pole 18A AC-3 rated Contactor 230V AC Coil. Single Phase Preventer (SPP) with phase reversal and voltage imbalance protection. The control functions such as Auto/ Manual Selector Switch On/ Off/ Trip LED Indicating Lamps Start/ Stop Push Buttons. AHU Starter Panel - 20 TR (Blower rating 7.5HP or 5.5 KW) |
| 505 | ITEM No. 495 :- Supply and Installation of Wall Mounted/ Floor Mounted AHU Starter panel CRCA sheet metal enclosure 1.6mm thickness powder-coated RAL 7035 IP54 or IP55 protection bottom gland plate. The main Incomer 3-Pole 32A MCCB 16kA breaking capacity. The Panel must have interlock function for Fire Alarm Interlock potential-free contact terminals VFD / BMS Enable relay terminals. Power Connector 3-Pole 18A AC-3 rated Contactor 230V AC Coil. Single Phase Preventer (SPP) with phase reversal and voltage imbalance protection. The control functions such as Auto/ Manual Selector Switch On/ Off/ Trip LED Indicating Lamps Start/ Stop Push Buttons. AHU Starter Panel - 40 TR (Blower rating 15 HP or 11 KW) |
| 506 | ITEM No. 496 :- VRF DX-AHU Integration Control Kit AssemblyDX-AHU Control Kit Box (Main PCB Enclosure) Microprocessor-based control unit housed in an IP54/ powder-coated sheet metal enclosure. Complete with terminal blocks main circuit board and transformer. Electronic Expansion Valve (EEV) Kit Assembly Factory-assembled high-precision pulse-motor- driven electronic expansion valve (2000-step resolution) with brass fittings for R- 410A refrigerant.Sensor Harness Set Pre-calibrated factory thermistors (10m minimum lead length) including • Liquid Pipe Temperature Sensor Gas Pipe Temperature Sensor Return Air / Room Temperature Sensor Supply Air / Discharge Temperature SensorWired LCD Remote Controller Wall-mounted controller featuring backlit graphical display 7-day timer fault diagnostic code display built-in room sensor non-polar 2-wire communication interface (up to 500m wiring distance)Suitable for 20 TR (8000 CFM) AHU having range from 22 HP to 30 HP capacity modules. |
| 507 | ITEM No. 497 :- VRF DX-AHU Integration Control Kit Assembly DX-AHU Control Kit Box (Main PCB Enclosure) Microprocessor-based control unit housed in an IP54/ powder-coated sheet metal enclosure. Complete with terminal blocks main circuit board and transformer. Electronic Expansion Valve (EEV) Kit Assembly Factory-assembled high-precision pulse-motor- driven electronic expansion valve (2000-step resolution) with brass fittings for R- 410A refrigerant. Sensor Harness Set Pre-calibrated factory thermistors (10m minimum lead length) including • Liquid Pipe Temperature Sensor Gas Pipe Temperature Sensor Return Air / Room Temperature Sensor Supply Air / Discharge Temperature Sensor Wired LCD Remote Controller Wall-mounted controller featuring backlit graphical display 7-day timer fault diagnostic code display built-in room sensor non-polar 2-wire communication interface (up to 500m wiring distance) Suitable for 40 TR (16000 CFM) AHU having range from 22 HP to 30 HP capacity modules. |
| 508 | Sub Work VII : Light System |
| 509 | ITEM No. 498 :- Supplying and erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 510 | ITEM No. 499 :- SITC+D5 D19 of 150W High Quality LED Parcan Light complete with Lamp source 3200K CCT Colour temperature 50000 hours burning life CRI and TLCI Values above 95COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided)DmX 512 dimming with 3 channel control Beam Angle of 11°/ 25° / 35°Total Power Consumption of 165WHigh quality output replacing 1000W Halogen ParFlicker Free 100% for Tv and Film Cameras11.7KHz Refresh Rate Linear Dimming 0 100%Fuse and Internal safety protectionsStrobe option Adjustable 125 times/ Sec VariableFixture provided with Yoke of Manual Adjustment5 Pin XLR for DmX Black powder coated body.RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1) 2012 CE Certification compliant to EN60598-1 2015 EN61437-2-13 2014LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product. |
| 511 | ITEM No. 500 :- SITC of 300W LED Profile Spot 19 Degree Light complete with 3200K CCT Colour Temperature 50000 hours burning life COB LED source from reputed make (LM80 to be provided) CRI and TLCI above 95 Strobe option Adjustable 1 25 times / Sec 4 Kinds of dimming curves Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1) 2012. CE Certification compliant to EN60598- 1 2015 EN61437-2-13 2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product. |
| 512 | ITEM No. 501 :- SITC of 54 x 3W LED Par Light RGBW Beam Angle 25° complete with LED source from reputed make (LM80 to be provided) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel 50000 hours burning life High Bright Red Green Blue White LEDs SourceUnlimited Color Mixing through DmX0 100% Linear dimming In built presets for differentcolors Strobe Mode 20 times/ SecData DmX through 3 / 5 Pin XLRs65dB 130dB Sound sensing capacityPower In and Out Connections High precision colors IP20 protectionPowder coated Black finish housingHaving Sound Control and Master Slave Auto Run ModeIlluminate the Indoor stage with unlimited colour effectsRigidly built pressure die-casted Aluminium body.RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1) 2012CE Certification compliant to EN60598-1 2015 EN61437- 2-13 2014LM79 Certificates from NABL Acrediated laboratory.Brand embosed impact on the light body for genuine product. |
| 513 | ITEM No. 502 :- ITEM No. 502 :- SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs 50000 hours burning lifeLED source from reputed make (LM80 to be provided)Having CRI TLCI Values above 95Flicker Free for high FPSSmooth fade in and Fade outHigh precision steady colorNo heat DmX 512 dimming with 2 Channel0 100% Powder coated Black finish housingRigidly built pressure die-casted Aluminium body LED Easy view displayData DmX through 3 / 5 Pin XLRs65dB 130dB Sound sensing capacity Power In and Out ConnectionsTotal Power Consumption of 180WSound Active Mode ControlIP20 protection.RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1) 2012CE Certification compliant to EN60598-1 2015 EN61437-2-13 2014LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product. |
| 514 | ITEM No. 503 :- SITC of 180W LED CCT tuneable Light complete with CCT Tuneable Lamp source LED source from reputed make (LM80 to be provided) Having CRI TLCI Values above 95 High precision steady color 50000 hours burning life No heat DmX 512 dimming with 2 Channel Beam Angle 15°/ 25°/ 45° 0 100% Smooth dimming Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body. LED Easy view display Flicker Free for high FPS. Smooth fade in and Fade out Data DmX through 5 Pin XLRS. Total Power Consumption of 180W Sound Active Mode ControlIP20 protection. 65dB 130dB Sound sensing capacity Power In and Out Connections RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1) 2012 CE Certification compliant to EN60598-1 2015 EN61437- 2-13 2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product. |
| 515 | ITEM No. 504 :- SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from reputed make (LM80 to be provided) 50000 hours burning lifeDmX 512 dimming with 4 / 8 Channel modesCRI and TLCI Value > 90 Strobe option Adjustable 1 25 times / Sec Variable Beam Angle 30 Degree Total Power Consumption of 420W11.7KHz Refresh Rate In built presets for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan 5 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv and Film Cameras Black finish housing IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1) 2012CE Certification compliant to EN60598-1 2015 EN61437- 2-13 2014LM79 Certificates from NABL Acrediated laboratory. |
| 516 | ITEM No. 505 :- SITC of 200W LED Fresnel Light having COB LED source from reputed make (LM80 to be provided) 3200K colour temperature 50000 hours burning life High quality uniquely designed Fresnel Lens CRI TLCI and R9 value above 96 LED COB Based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 220W Linear dimming 0 100% Adjustment Flicker Free for High FPS Power AC90-260V 50/ 60HZ Working Temperature - +40° -30° Active Cooling with Low Noise Fan DmX and RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin xlr Black powder coated fabricated housing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1) 2012 CE Certification compliant to EN60598-1 2015 EN61437-2-13 2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product |
| 517 | ITEM No. 506 :- SITC of 300W LED Cyclorama Wash Light with LED source from reputed make (LM80 to be provided) 60 Degree or better beam spread 50000 hours burning life 48 LED Emmitters having RGB SourceSeamless CCT Tuning from 3000K 7000KR G B + WW direct access through knobs for manualoperation 10 Presets for CCT SelectionLuxeon LED High Lumens per wattRGB Colour mixing and presets controlAsymmetric Reflector on LEDsUniform Spread with RGB LED control14+ DmX Channel operation Barndoor arrangement for Light spill control Nuetrick Power loop in and Out230V AC Input power along with Fuse protectionNo Noise 0 dB operation RDM Control options with latest technology (RDM ID to be specified)LM79 Certificates from NABL Acrediated laboratoryCertification having BIS compliant to IS 10322 (Part 5/ Sec 1) 2012 CE Certification compliant to EN60598- 1 2015 EN61437-2-13 2014Brand embosed impact on the light body for genuine product |
| 518 | ITEM No. 507 :- SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD |
| 519 | ITEM No. 508 :- SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip |
| 520 | ITEM No. 509 :- SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid and other rigging systems |
| 521 | ITEM No. 510 :- SITC of Fixed stage side Ladder as per the design With an Mild Steel 40NB 48 OD black matt finish. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm. Size of 600mm x 2400mm Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required Spud and Trolley Pivoted or Fixed Suspenders as per site conditions Round pipe welded to create square frameHeavy duty trolly to hold and rotate wing frame Material for the light bar shall be of Mild Steel Pipe. Powder coated with Matt black TextureFixing Through Suspenders as per site conditions Ladder Length shall be of customized type as per site condition. |
| 522 | ITEM No. 511 :- SITC of Motorised integrated fly bar/ winch of 9Mtr length Motorized Light bar The winch shall be provided with 01 Nos. of 1.5 HP 1440 RPM 90 B5 frame 3Ph. (HP) 1.1(1.5) Frame 90S EFF 75.0% MTG B5 AMP 2.7Y Volt 415v DE BRG 62052Z DUTY S1 FREQ 50Hz NDE BRG 62052Z IP 55 AMB 50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80 1 90B5 Single Reduction 7.5 1 to 100 1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction.Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley guide pulleys GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller Safe working load of 200Kg. Cable management system. |
| 523 | ITEM No. 512 :- SITC of Motorised integrated fly bar/ winch of 9Mtr length Motorized Hanging Mic Bar The winch shall be provided with 01 Nos. of 1.5 HP 1440 RPM 90 B5 frame 3Ph. (HP) 1.1(1.5) Frame 90S EFF 75.0% MTG B5 AMP 2.7Y Volt 415v DE BRG 62052Z DUTY S1 FREQ 50Hz NDE BRG 62052Z IP 55 AMB 50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80 1 90B5 Single Reduction 7.5 1 to 100 1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft. This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded ur I up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction.Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley guide pulleys GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller Safe working load of 200Kg. Cable management system |
| 524 | ITEM No. 513 :- SITC of Motorised integrated FOH fly bar/ winch of 10 Mtr length Motorized Light bar The winch shall be provided with 01 Nos. of 1.5 HP 1440 RPM 90 B5 frame 3Ph. (HP) 1.1(1.5) Frame 90S EFF 75.0% MTG B5 AMP 2.7Y Volt 415v DE BRG 62052Z DUTY S1 FREQ 50Hz NDE BRG 62052Z IP 55 AMB 50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80 1 90B5 Single Reduction 7.5 1 to 100 1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft. This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction.Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley guide pulleys GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller Safe working load of 200Kg. Cable management system. |
| 525 | ITEM No. 514 :- SITC of Power Distribution Electrical panel having a SITC Incomer of 100 A. Floor mount / rack mount / wall mount. Miniature circuit brakers of single poles shall be fixed of different ratings from 6/ 10/ 16/ 25A as per the lighting fixtures.Wiring inside the module for power control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130ement.All welding slag grounded off and welding pits wiped smooth with plumber metal.Power panels shall be designed in such a way that the internal space is sufficient for hot air movement and the electrical component does not attain temperature more than 40 degree Celsius.Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Nuetral separation made using incomer of L&T or Schneider make Voltmeter Ammeter display for reading visualization Individual MCB control for 29 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Terminal for both incoming and outgoing cable shall be suitable for 1100 volts grade aluminum/ copper conductor PVC insulated and sheathed armoured cable and shall be suitable for connections. Provided with ivery connectors for the internal terminations and external outgoing connecting pointsCustom built as per specification and project required. |
| 526 | ITEM No. 515 :- SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing / 15 (1.5mm) Total Max Rating 10A 250V A.C 20°C to +70°C Operating Temp Moldings Nylon Flammability Rating UL94V-0 Black powder coated fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing |
| 527 | ITEM No. 516 :- SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing / 15 (1.5mm) Total Max Rating 10A 250V A.C 20°C to +70°C Operating Temp Moldings Nylon Flammability Rating UL94V-0 Black powder coated fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/ floor fixing. |
| 528 | ITEM No. 517 :- SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding Black powder coated fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing |
| 529 | ITEM No. 518 :- SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding Black powder coated fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing |
| 530 | ITEM No. 519 :- SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket and 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing |
| 531 | ITEM No. 520 :- SITC of Internal Earthing System with copper bare conductors all along the cable trays metal parts and Installation Hardwares |
| 532 | ITEM No. 521 :- SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 150 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid. |
| 533 | ITEM No. 522 :- SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid.SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid. |
| 534 | ITEM No. 523 :- SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections. |
| 535 | ITEM No. 524 :- SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing |
| 536 | ITEM No. 525 :- DmX Touch Screen based controller having 7 Multi touch screen option 2 DmX Outlets 5 Pin XLRs 512 Channels each Optically isolated outputs 4 Smooth Encoders for control operation of attributes Backlit keys 12 Fader Stacks 600+ Playbacks 350+ Group saving 350+ Presets User defined shape effects Macro saving options External Midi timecode options Internal clock Shortcut user interfaces Master fader Blackout Key under Master fader Numerical keypad for the light command entry inbuilt embedded within controller USB interface Scene saving options Show saves and load save features custom built user interface library for fixture files. |
| 537 | ITEM No. 526 :- SITC of Opto isolated RDM enabled DmX splitter unit provided with 8 Isolated outputs Slow blow safety fuse 5 Pin XLR for output interface Dual mode to select 2 universe operation DmX Input through 5 Pin XLR Connector Control Protocol RDM and DMX 512 Powder coated compartment finish Mounting brackets for grid mount. |
| 538 | ITEM No. 527 :- SITC of C Profile MS Hot rolled strips 3mm thick with Added U bend used either to create basic supports Customized 40 x 50mmm All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machineryDuly powder coated Matt black texture finish paint. |
| 539 | ITEM No. 528 :- SITC of 29-way Power Marhalling Box made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points fibre / brass glands of suitable size. |
| 540 | ITEM No. 529 :- SITC of Auxilary Marshalling Box made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points fibre glands of suitable size |
| 541 | ITEM No. 530 :- SITC of Flat Cable Wire harness required to provide the input power to the sockets on the hoists connecting between grid level circuit box to on hoist circuit box with below specifications FRLS Multi core Copper cable 18 Cores of Power each with 2.5 Sq. mm copper wires insulated with high insulated material 2 DmX 5 core cableswith low noise Width of the flat cable 120mm approx. Clips at each bending of the cable to act as retractor unit Long life no breakage smooth folding. |
| 542 | ITEM No. 531 :- SITC of Motor Control Panel with DMX and Manual selectable Motor control panel cum remote control 4 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button Emergency trip RYB indicators Supply Indictor and necessary meters operated wireless smart working functianailty for the motorised lightbars should be there with one neutral and phase connection slots and with 2 vertual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features. |
| 543 | ITEM No. 532 :- SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint fitted with required channels and ivery connectors necessary glands etc. |
| 544 | ITEM No. 533 :- SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. |
| 545 | ITEM No. 534 :- SITC of FRLS Copper unarmoured Flexible cable 19694 having 4 Core each of 4 Sq mm size |
| 546 | ITEM No. 535 :- SITC of FRLS Copper unarmoured Flexible cable IS694 having 12 Core each of 1.5 Sq mm size. |
| 547 | ITEM No. 536 :- SITC of 5 Core DmX Cable with Sheathed housing on the cable well designed insulation low noise suitable to transmet DmX signal. |
| 548 | ITEM No. 537 :- SITC of Motorized LED Moving Head Beam / Spot and Wash effect light High bright long throw 350W Chip On Board Daylight White LED 1 Static Gobo Wheel - 10 Fixed Metal Gobos 21/ 26 Channel DmX Control Moto Dual Prism Mode 3 Colour Wheels - 9 Colours + CMY Motorized Zoom from 7° 31° Motorized Focus and Frost High Bright Daylight 6500K Open 7 Interchangeable Glass Gobos + OpenMaster Slave Test Modes 8 Bit/ 16 Bit High Precision Movement Sound Active and Auto Run Mode Pan Angle 540° Tilt Angle 270°. DmX control through 3 / 5 Pin XLRs IP-20 rated product |
| 549 | ITEM No. 538 :- SITC of Motor Control Panel for main curtain and rear curtain with DMX and Manual selectable Motor control panel cum remote control 2 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button Emergency trip RYB indicators Supply Indictor and necessary meters operated wireless smart working functianailty for the motorised lightbars should be there with one neutral and phase connection slots and with 2 vertual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features |
| 550 | ITEM No. 539 :- SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition curtain provided with eyelets at every 200/ 250mm for uniform fixing on to curtain trollies (For Main Curtain) Size 15 Mtr x 6.6 Mtr |
| 551 | ITEM No. 540 :- SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition curtain provided with eyelets at every 200/ 250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size 15 Mtr x 6.6 Mtr. |
| 552 | ITEM No. 541 :- SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition curtain provided with eyelets at every 200/ 250mm for uniform fixing on to curtain trollies (For Main Valance) Size 14 Mtr x 1.5 Mtr |
| 553 | ITEM No. 542 :- SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition curtain provided with eyelets at every 200/ 250mm for uniform fixing on to curtain trollies (For Frills) Size 10Mtr x 1.2Mtr. |
| 554 | ITEM No. 543 :- SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition curtain provided with eyelets at every 200/ 250mm for uniform fixing. (For Wing) 6.6 Mtr x 1.5 Mtr |
| 555 | ITEM No. 544 :- SITC of On Stage Fixed Valance Bar 14 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free |
| 556 | ITEM No. 545 :- SITC of On Stage Fixed Frill Bar 10Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel supported to hang the frill connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free |
| 557 | ITEM No. 546 :- SITC of Fixed Wing Structure designed as per site condition for a height approx 6.6 Mtr x 1.5 Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. |
| 558 | ITEM No. 547 :- SITC of Motorized DMX operated Main Curtain 15 Mtrs straight Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP 1440 RPM 90 B5 frame 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440 KW (HP) 1.1(1.5) Frame 90S EFF 75.0%. MTG B5 AMP 2.7Y Volt 415v DE BRG 62052Z DUTY S1 FREO 50Hz NDE BRG 62052Z IP 55 AMB 50 degree. The outer surface temperature is limited shall have an Worm Reduction Gearbox with GMRV-90 80 1 90B5 Single Reduction 7.5 1 to 100 1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete lengthCurtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of200mm / 250 mm throughout the track Overlap of 0.50.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/ 250mm with a master trolley. Open and close limit controller.Drive unit with suitable capacity of motor unit .Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free Black texture finish paint. All metal parts are powder coated |
| 559 | ITEM No. 548 :- SITC of Fixed Cyclorama arrangement of 7 Mtrs straight as per design made up of I Track for complete length with Trollies uniformly distributed along the track at every 200/ 250mm. All metal parts are powder coated with black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free |
| 560 | ITEM No. 549 :- SITC of Perforated plastic cyclorama screen with perforation on 1side with gathering of 0% stitched as per site condition curtain provided with eyelets at every 200/ 250mm for uniform fixing on to curtain trollies. Size 7 x 6.6Mtr |
| 561 | Sub Work VIII : Sound System |
| 562 | ITEM No. 550 :- Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/ floor with chiselling appropriately as per specification. |
| 563 | ITEM No. 551 :- Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/ female 19 pin HDMI connectors complete. |
| 564 | ITEM No. 552 :- Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/ female 19 pin HDMI connectors complete. |
| 565 | ITEM No. 553 :- Supplying and installing cat-6 STP cable suitable for networking complete as per specification. |
| 566 | ITEM No. 554 :- Supplying, installing and testing UTP connector (RJ-45) as per specification. |
| 567 | ITEM No. 555 :- Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800 x 1000 x 2070 mm) as per specification. |
| 568 | ITEM No. 556 :- Supplying, erecting, testing and commissioning of rust free microphone floor stand of chrome plating/ powder coating or S.S. material 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete. |
| 569 | ITEM No. 557 :- Supplying, erecting, testing and commissioning of rust free microphone table stand of chrome plating/ powder coating or S.S. material up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete. |
| 570 | ITEM No. 558 :- Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification. |
| 571 | ITEM No. 559 :- Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete. |
| 572 | ITEM No. 560 :- SITC Overhead Microphone SPECIFICATIONS Frequency Response (Figure 1) 50 to 17 000 Hz Polar Pattern (Figure 2) Output Impedance EIA Rated at 150 (180 actual) Sensitivity (At 1 000 Hz open circuit voltage*) Cardioid -35.0 dBV/ Pa (17.8 mV) Supercardioid -33.5 dBV/ Pa (21.1 mV) Omnidirectional -27.5 dBV/ Pa (42.2 mV) *1 Pascal = 94 dB SPL Maximum SPL (1 kHz at 1% THD 1 k load) Cardioid 124.2 Supercardioid 122.7 dB Omnidirectional 116.7 dB |
| 573 | ITEM No. 561 :- SITC Line Array Loudspeaker Hanging Bracket With Accesories |
| 574 | ITEM No. 562 :- SITC Power AmplifierTwo-channel 2100W 40 Power AmplifierPeakx Plus™ Limiters provide the ultimate insystem performance and protection by allowing full control over threshold attack and releaseEnhanced Subharmonic Synth section provides user control over frequency gain and filter type for system- specific tuning3 User-defined fan mode controls - normal early and fullspeed - for matching fan performance to a specific applicationNew system monitoring provides software visibility of AC line voltage and power supply temperatureIntegrated cast-aluminum handles for easy handling andenhanced durabilitySpecificationsChannels 2Sensitivity 1.4VRated Power Output (per channel) 3000W 20 2100W40 1200W 80Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 103 dB (A-weighted) THD < 0.5%Frequency Response (at 1W 20 Hz - 20.kHz) + 0 dB -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dBDimensions 3.5 x 19 x 16.2 Weight 24 lbs (10.9 kg)Shipping Weight 30 lbs (13.6 kg)IEC Power Connector 20A |
| 575 | ITEM No. 563 :- SITC 18 in. High Power Flying Subwoofer18 inch 2268H Differential Drive® woofer for extended low-frequency outputLarge port area for reduced distortion20 mm threaded pole socket for solid secure satellite speaker mounting Specifications Power Rating 800 W/ 1600 W/ 3200 WFrequency Range 31 Hz - 220 HzDimensions (H x W x D) 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)Frequency Response (-10dB) 31 Hz - 220 HzRecommended Crossover Frequencies 80 Hz 24 dB / octave HPF80 Hz 24 dB/ octave LPFSystem Maximum SPL 130 dB SPL peakSystem Sensitivity (1w 1m) 95 dB SPLLF Driver 1 x JBL 2268H 457 mm (18 in) DifferentialDrive wooferNominal Impedance 8 ohmsActive Tunings Tunings available at www.jblpro.com Enclosure Rectangular 18 mm 13-ply birch plywood Suspension / Mounting Optional VRX932LA-AF line array frame kit or 10mm eyeboltFinish Black DuraFlex™ finishGrille Powder coated black 16-gauge perforated steel with acoustical transparent charcoal foam backing.Inputs Neutrik® Speakon® NL-4 (x2) |
| 576 | ITEM No. 564 :- SITC Supplying Installation Testing and Commissioning Stage Moniter Speakar Professional Powered Two-Way 12-inch PA Loudspeaker FeaturesTransducers 912G 12 ferrite magnet wooferJBL 2408H-2 1.5 poly-annular diaphragm compression driverUpdated JBL image control waveguides improvedispersionLow-noise low-distortion gain staging designLightweight efficient Class D amplificationPower 2 000 watts peak/ 1 000 watts RMSFrequency response 50 Hz-20 kHz 4pi (-10 dB) 65Hz-17 kHz 4pi (-3 dB)Dispersion 90° x 50°Max SPL 132 dBCrossover frequency 2 050 HzSpecificationsFrequency Range (-10dB) 50 Hz - 20 kHz (4)Frequency Range (-3 dB) 65 Hz - 17 kHz (4)Coverage Pattern 90° x 50°Transducer Impedence Rated Woofer 4 2 Tweeter 8 0 Max SPL 132 dBPower Rating 2000W peak / 1000W RMS |
| 577 | ITEM No. 565 :- SITC Compact 2-way Loudspeaker with 2 x 8 LF Features 1 Exit Compression Driver with PT™ Waveguide 205 mm (8 in) LF transducer Compact enclosure 750W Program Specifications. Frequency Range (-10dB) 53 Hz - 20 kHz Frequency Response (±3 dB) 65 Hz - 20 kHz System Power Rating 700 W (AES rated) 375 W / 750 W / 1500 W (Continuous/ Program/ Peak) Impedance 8 ohms Coverage Pattern / 26 120° x 60°/ 95 90° x 50° Dimensions (H x W x D) 679.5 x 237.5 x 254.0 mm (26.8 x 9.4 x 10.0 in) Net Weight (each) 18.6 kg (40.9 lb) Crossover Modes Passive Maximum SPL (1m) 120 dB System Sensitivity (1w 1m) 94 dB SPL |
| 578 | ITEM No. 566 :- SITC Two-channel 1200W 40 Power Amplifiereakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold attack and releaseEnhanced Subharmonic Synth section provides user control over frequency gain and filter type for system- specific tuning3 User-defined fan mode controls - normal early and fullspeed - for matching fan performance to a specific application Specifications Channels 2 Sensitivity 1.4VRated Power Output (per channel) 1600W 20 1200W 45 650W 80Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted)THD <0.5%Frequency Response (at 1W 20 Hz - 20 kHz) + 0 dB -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5 x 19 x 12.25 Weight 18.5 lbs (8.4 kg)Shipping Weight 21.5 lbs (9.8 kg)IEC Power Connector 15A |
| 579 | ITEM No. 567 :- Supplying Installation Testing and Commissioning Professional MTU-28 U-Bracket for AC28/ xx Two-Way Loudspeaker |
| 580 | ITEM No. 568 :- Supplying Installation Testing and Commissioning of 15- Watt Premium-Sound Cabinet Loudspeaker High fidelity music and speech reproduction Selectable 8 ohm 70 V and 100 V inputs ABS enclosure Maximum power 22.5 W Rated power (PHC) 15 W Power tapping-15/ 7.5/ 3.75/ 1.9 W Sound pressure level at rated power / 1 W (1 kHz 1 m)- 99/ 87 dB Effective frequency range- (-10 dB) 95 Hz to 20 kHz Rated input voltage -11/ 70/ 100 V Rated impedance - 8/ 326/ 667 ohm Transducers- 101.6 mm (4 ) woofer 13 mm (0.51 ) dome tweeter. |
| 581 | ITEM No. 569 :- Supplying Installation Testing and Commissioning of Professional Quality Imported Power Amplifier 480 W with Built in Temperature controlled Fan Only Overload Protection Short circuit Protection. Voltage 24 VDC +15% / -15% Current max 30 A Performance Output power (rms/ maximum) 480 W/ 720 W Power reduction on backup power -1 dB Frequency response 50 Hz to 20 kHz (+1/ 3dB 10 dB ref. rated output) Distortion <1% rated output power 1 kHz S/ N (flat at max volume) >90 dB. |
| 582 | ITEM No. 570 :- SITC 32-Channel Premium Mixing Console 24 Mic Inputs with 48V Phantom Power and HPF per Channel32 Line Inputs (24 mono and 4 stereo) 6 AUX Sends + 2 FX Sends4 GROUP Buses + ST Bus2 Matrix out1 Mono out |
| 583 | ITEM No. 571 :- SITC 12 in Two-way Line Array Loudspeaker system Constant Curvature waveguide lor unprecedented array coherence. Dual angle pole socket for aiming flexibility. One or two speakers may be mounted to a 35 mm pole or tripod stand. Integral rigging hardware for simple connection of enclosures and optional array frame. Arrays of up to six enclosures may be flown. Array Configuration Selector permits array shading in passive mode. Specifications Power Rating 800 W/ 1600 W/ 3200 W Frequency Response (-10dB) 57 Hz - 20 kHz Dimensions (H x W x D) 343mm x 597mm x 376 mm (13.5in x 23.5in x 14.8in) Frequency Response (+-3 dB) 75 Hz - 20 Hz Coverage Pattern 100 x 15 nominal Crossover Modes Bi-amp / passive externally switchable Crossover Frequency 132 dB SPL peak 1.2 kHz. Maximum SPL (1m) 130 dB SPL peak (passive mode). LF 130 dB HF 139 dB. Sensitivity Passive 95 dB SPL Bi-amp LF 95 dB SPL Bi- amp HF 114 dB SPL LF Driver 1 x JBL 2262H 305 mm (12 in) Differential Drive® woofer with neodymium magnet dual voice-coils and dual magnetic gaps. HF Driver 3 x JBL 2408J 38 mm (1.5 in) voice-coil neodymium compression driver. Nominal Impedance Passive = 8 ohm Bi-amp LF = 8 ohm Bi-amp HF = 8 ohm |
| 584 | ITEM No. 572 :- SITC Boundary Microphone SPECIFICATIONS Frequency Response (Figure 1)-50 to 17 000 Hz Output ImpedanceEIA Rated at 150 0 (180 0 actual)Sensitivity (at 1 kHz open circuit voltage)Cardioid Cartridge -27.5 dBV/ Pa (42.2 mV)Supercardioid Cartridge -26.5 dBV/ Pa (47.3 mV)Omnidirectional -22.0 dBV/ Pa (79.4 mV)1 Pascal=94 dB SPLMaximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion 1 k load) Cardioid 117.0 dBSupercardioid 116.0 dB Omni directional 111.5 dB Signal to Noise Ratio (referenced at 94 dB SPL) Cardioid 71.0 dB Supercardioid 72.0 dB Omni directional 76.5 dB Preamplifier Output Clipping Level -6 dBV (0.5 V) |
| 585 | ITEM No. 573 :- Supplying Erecting Testing and Commissioning of Projector Mount 1) 100% Aircraft Aluminum (6061-T6) Construction 2) All the necessary hardware included 3) Detailed instructions for easy and quick installation 4) Sets the projector approximately 8 inches away from the ceiling 5) Lateral Shift Coupling allows 1-1/ 2 inches of left/ right lateral adjustment Specification Binding Electronics Brand PCMD LLC. EAN 0008440003452 Label Projector Ceiling Mounts Direct LLC. Manufacturer Projector Ceiling Mounts Direct LLC. Model INFOCUS-IN81-LAT-8EXT Product Group CE Product Type Name OFFICE_ELECTRONICS Publisher Projector Ceiling Mounts Direct LLC. Studio Projector Ceiling Mounts Direct LLC Make - Kristal/ Logic. |
| 586 | ITEM No. 574 :- SITC Podium Microphone FEATURES RESAvailable with a variety of heights and mounting styles to choose from. The S/ C. S/ S and S/ N models include a silent muteswitch with LED indicator a Shure Microflex exclusive.wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum Interchangeable cartridges provide the right polar pattern for every application SPECIFICATIONS Equivalent Output Noise (A-weighted)Cardioid 28.0 dB SPLSupercardioid 26.5 dB SPLOmnidirectional 20.5 dB SPLSignal to Noise Ratio (referenced at 94 dB SPL)Cardioid 66.0 dBSupercardioid 67.5 dBOmnidirectional 73.5 dBDynamic Range at 1 kilohm load96.2 dB-100 dB at 0 gainCommon Mode Rejection 45.0 dB minimumPreamplifier Output Clipping Level (1% THD) -6.0 dBV (0.5 V) -12 dBV at 0 gainPolarity-Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connectorPower Requirements-11 to 52 Vdc phantom 2.0 mA Environmental Requirements Operating Temperature Range -18 to 57 57 degrees C (0 to 135 degrees F) Relative Humidity 0 to 95% |
| 587 | ITEM No. 575 :- Supplying and erecting Wireless and Wired Microphones Dual Anteena UHF Wireless Handheld Cardiod Microphone system with freq bandwidth 80 to 18000 Hz diversity metallic reciever battery status LCD in Tx and Rx Synthesized PLL THD <0.8% cardiod polar pattern 32 selectable freq/ band S/ N 100dBA. 14 Hours Battery Life. Model no.EV R-300HD |
| 588 | ITEM No. 576 :- SITC DriveRackFeatures INPUT PROCESSINGdbx CompressionAFS™ (Advanced Feedback Suppression)31-Band Graphic EQ12-Band Parametric EQ (with narrow notch capabilities) Subharmonic Synthesis Backline Delay Noise Gate OUTPUT PROCESSINGCrossover (supports full range up to mono 6-way systems)12-Band AutoEQs (8 AutoEQ bands 4 User bands) dbx Compression-Automatic Gain Control Subharmonic SynthesisNoise Gate-Tower Delays (up to 1000ms per output) 8-Band Parametric EQs (used for speaker tunings) dbx Limiting Driver Alignment Delays |
| 589 | ITEM No. 577 :- SITC 3 pole female/ Male cable connector with Nickel housing and silver contacts. Technical Information Product -Title NC3FXX Connection Type XLR Gender female Electrical Capacitance between contacts s 4 pF Contact resistance = 3 mn Dielectric strength 1 5 kVdc Insulation resistance > 10 G0 (initial) Rated current per contact 16 A Rated voltage < 50 V Make-Newtrick/ MX |
| 590 | ITEM No. 578 :- SITC 4 way Satge Box With XLR Chassis Connectors Make-MX/ Casting/ Newtric |
| 591 | ITEM No. 579 :- SITC 32 way Patch Panel Box With XLR Chassis Connectors. Make-MX/ Casting/ Newtric |
| 592 | ITEM No. 580 :- SITC 4 pole cable connector chuck type strain relief dark grey bushing Features and Benefits Current rating 40 A rms continuousUp to 50 A audio signal duty cycle 50%Only 3 parts easy to assembleHigh impact materials long lasting and reliableEasy and extremely precise locking system Quick Lock Improved grip on latch1 piece strain relief chuck for 7 to 14.5 mm cable O.D.Color coding possiblelmproved screw-type termination for highest pull-out forceIntegrated design guarantees |
| 593 | ITEM No. 581 :- SITC HDMI EXTENDER OVER HDBaseT - 70 METER 4K The 18Gbps HDMI Extender is a tool which extends your HDMI signal over 230ft/ 70meters to a compatible display. FEATURESHDMI 2.0b (18Gbps) HDCP 2.2 and DVI compliant Video resolution up to 4K2K 50/ 60Hz (YUV444) 10bit HDR (High Dynamic Range) pass through Supports HDMI High Bit Rate(HBR) audio pass through Supports CEC bypassSupports POH (Power Over HDBaseT) function Transmission distance Over CAT6 cable (STP/ UTP) 70 meters 1080P 60Hz12bit 3D1080P 30Hz 12bit 40 meters 1080P 60Hz 12bit 1080P 120Hz 8bit 4Kx2K 50/ 60Hz (YUV420) 4Kx2K 50/ 60Hz (YUV444) Make - Logic/ Impression/ Aten |
| 594 | ITEM No. 582 :- Supply installation and commissioning of Laser Projector 5000 lumens WXGA size of effective display area- 0.76 (19.3 mm) x 3 BrightEra LCD Panel Aspect ratio 16 10 Number of pixels- 3 072 000 (1280 x 800 x 3) pixels Zoom - Ratio Approx. x 1.45 Throw ratio- 1.28 1 1.88 1 Lens shift Range Vertical +20% to +55% Lens shift Range Horizontal +/ - 10% Light source Type- Laser diode Filter cleaning / replacement cycle (Max.)- 20 000 H Screen size- Screen size- 40 to 300 (1.02 m to 7.62 m) Light output- 5 000 Im Contrast ratio -500 000 1 Speaker- 16 W Display resolution- 1920 x 1200 dots Video signal input- NTSC PAL SECAM 480/ 60p 576/ 50i 720/ 60p 720/ 50p 1080/ 60i 1080/ 50i The following items are available for HDMI input only 1080/ 60p 1080/ 50p 1080/ 24p Keystone correction Horizontal- +/ - 30 degrees Vertical- +/ - 20 degrees INPUT OUTPUT. RGB / Y PB PR input connector Mini D-sub 15 pin Audio input connector Stereo mini jack INPUT B- HDMI input connector HDMI 19-pin HDCP support Audio input connector HDMI audio support INPUT C- HDMI input connector HDMI 19-pin HDCP support Audio input connector HDMI audio support INPUT D- HDBaseT interface connector RJ45 4 play (Video Audio LAN Control) VIDEO IN- Video input connector BNC Audio input connector Shared with INPUT A OUTPUT- Audio output connector Stereo mini jack LAN- RJ45 100BASE- TX USB TYPE- A TYPE-R |
| 595 | ITEM No. 583 :- SITC Vocal Microphone Frequency response tailored for vocals with brightened midrange and bass rolloff Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise Pneumatic shock-mount system cuts down handling noise Effective built-in spherical wind and pop filter Supplied with break-resistant stand adapter which rotates 180 degrees Legendary Shure quality ruggedness and reliability Cardioid (unidirectional) dynamic Frequency response 50 to 15 000 Hz |
| 596 | ITEM No. 584 :- SITC Speaker Cable For Twisted Cable Size 2.5 Sqmm Usage/ Application - Twisted Cable Size - 2.5 SqmmType Of Cable - Speaker CableElectronic 2 C #14 Str TC PVC Ins PVC Jkt. CL3.Electronic 2 Conductor 14AWG (42x30) |
| 597 | ITEM No. 585 :- SITC Speaker Cable For Twisted Cable Size 6 Sqmm Audio Cable 2 Conductor 10 AWG BC Unshielded CL2 Audio Cable Rated-CL2 2-10 AWG highly flexible stranded bare copper conductors with PVC insulation PVC jacket with ripcor |
| 598 | Sub Work IX : Ongrid Solar Rooftop System |
| 599 | ITEM No. 586 :- Supplying, installing, testing and commissioning of 10 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 30 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter proper base plate canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB MCB etc. wiring up to solar Inverter in casing and capping display board sign board two distinct earthing lightning arrester liaisoning charges remote monitoring system with maintaining card/ chip for 5 years including net charges for RMS System complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification. |
| 600 | ITEM No. 587 :- Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification |
| 601 | ITEM No. 588 :- Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB / TP MCB/ FP MCB / RCCB / RCBO complete erected on angle iron/ GI frame. |
| 602 | ITEM No. 589 :- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes panel boards etc. including cutting bending drilling welding riveting treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. |
| 603 | ITEM No. 590 :- Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 604 | ITEM No. 591 :- Supplying and erecting AC three phase LT CT multifunction net meter DLMS compliance of accuracy class 0.5 3 x 240V 50Hz with backlit LCD display optical port and RS 232 port (measures import kWh kVAh export kWh kVAh Net kWh kVAh V I kW 6 months history of energy load survey TOD tamper detection and logging power ON/ OFF events instantaneous parameters of rating 1/ 5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. |
| 605 | ITEM No. 592 :- Supplying, erecting and terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. copper conductor complete erected with glands and lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification. |
| 606 | ITEM No. 593 :- Supplying and laying (including excavation) of suitable width and depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/ road surface to required depth complete. |
| 607 | ITEM No. 594 :- Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing and recording the results as per specification. |
| 608 | ITEM No. 595 :- Supplying and erecting GI strip of high purity required size used for earthing on wall and/ or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification. |
| 609 | TOTAL : II) Electrical Work Portion Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender