Tender For Demolition Of Old Panel Room And Providing Metal Shed For Housekeeping Staff In Mandakini Garden
Tender Value
9.69 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
11 days left
EMD
19387
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Demolition Of Old Panel Room And Providing Metal Shed For Housekeeping Staff In Mandakini Garden
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material as per direction of Engineer - in- charge |
| 2 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable material as per direction of Engineer-in-charge. |
| 3 | Demolishing cement concrete manually/ by mechanical means includingdisposal of material as per direction of Engineer -in - charge. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material. For thickness of tiles above 25 mm and up to 40 mm |
| 5 | Taking out doors, windows and clerestory window shutters (steel or wood)including stacking at designated place inside campus as per instructions from Engineer in Charge |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, for all lift, including getting out the excavated soil and disposalof surplus excavated soil as directed. |
| 7 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:3:6 (1 Cement : 3 coarse sand (zone-lll) derived fromnatural sources : 6 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 8 | Providing & laying rubble stone soling 225 MM thick using spotless stones below floors roads/pavements etc. mechanically / manually consolidated thickness as specified below with stones vertically handset interstices packed with smaller stone chips, binding with murrum & sprinkling water for proper consolidating and finishing to required levels in quantities as and when required etc. complete all as directed by the Engineer-in-Charge. |
| 9 | Kota stone slab flooring over 25 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shade ofthe slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 10 | Providing and laying RCC:1:1.5:3 (1 Cement: 1.5 coarse sand (zone-lll) including manufactured sand derived Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%). |
| 11 | REINFORCEMENT: Reinforcement for reinforced cement concrete at all floors and levels including supplying cutting bending fixing and binding in position with 1.6mm dia soft drawn annealed binding wire including cost of binding wire labour etc. complete all as per specifications and as directed by the Engineer-in-Charge. (laps will not be measured). With high yield strength deformed bars (TMT bars) of 500 D or more |
| 12 | FORM WORK: Centring and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts |
| 13 | structural steel work of all types riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including two coats of synthetic enamel paint all complete. |
| 14 | Supplying, drilling / cleaning hole and fixing of chemical anchor fastners of 16mm dia embedded upto 150 mm in concrete for fixing of base plate as per the directions of Engineeer Incharge including all the required preparing surface by demolishing water proofing, RCC surface if any . |
| 15 | Providing corrugated metal roofing of sheets manufactured from zinc/ aluminum alloy colour coated from high tensile steel minimum yield strength 550 Mpa; total sheet thickness including coating 0.63 mm. profile and colour as approved by EIC ; including fixing as per manufacturers recommendations and including flashings and accessories such as ridges, corner flashings, end flashings and galvanised fasteners from reputedmanufacturers such as Mark Fasteners. For correct levelling and alignment of sheets height of purlin tops shall be adjusted as provided in purlin connections. Mode Of Measurements: Plain area in the inclined plane of sheets shall be measured. Nothing extra shall be added for collugations, profile, side laps, end laps etc. |
| 16 | Dismantling carefully existing electrical panel and switches and cables and shift to nearby location as per instruction. |
| 17 | Disposal of building rubbish / malba / similar unserviceable, dismantledor waste materials by mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved byEngineer-in-charge out of ACTREC premises including all lead and lifts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender