Tender For Provision Of Delta Taxi Lighting At Jpni Airport,Patna For The Year 2026-27.
Tender Value
42.98 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
18 days left
EMD
85974
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Delta Taxi Lighting At Jpni Airport,Patna For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of omni-directional 8 inch dia. MIRL, Inset LED Taxiway Edge light fixture,with shallow base bottom box and matching body of the fitting, inner body and outer cover complete for mounting the fitting in pavement suitable for operation at 2.8 Amps to 6.6 Amps series circuit supply current complete with suitable LEDs, Omni-directional Blue lens , integrated encapsulated suitable electronic converter / driver with standard secondary lead etc. The fitting shall be of low protrusion type and the prism shall be of replaceable type without applying any compound. Fitting arrangement and photometric requirements shall confirm to latest ICAO annex 14 requirements,relevant standards, tender specifcations etc complete as required. |
| 2 | Installation, testing and commissioning of inset LED Taxiway Edge light fixture, upon taxiway/Apron with leveling,aligning and setting etc i/c cutting the concrete/ bitumen pavement to required level at existing position of inset fittings by core cutting machine,installation the inset fitting with help of jigs,filling the bottom to raise the height of fitting approx 100 - 125 mm and side with sealant DOBEFIL 60/Hardner mixture,making connection with existing secondary lead of isolating transformer etc complete all respect as required as per ICAO specification and as per site requirement. |
| 3 | Supply of MIRL Elevated LED Taxiway Edge light fixture suitable for operation at 2.8 Amps to 6.6 Amps series circuit supply current complete with suitable LEDs, Omni-directional Blue lens (glass), Lens clamping mechanism, breakable coupling, rings /gaskets, base plate with 06 nos. M-10 stainless steel bolts and including an integrated encapsulated suitable electronic converter / driver with standard secondary lead etc. complete the fitting as required.The photometrics of the fitting arrangment shall confirm to ICAO annex 14 vol 1 and confirming to relevant standards, specifications as per the requirements. |
| 4 | Installation, testing and commissioning of Elevated type taxiway Edge light fixture upon runway/Apron with leveling,aligning and setting etc i/c cutting the concrete/ bitumen pavement to required level at new location by core cutting machine,installation the inset fitting with help of jigs, filling the bottom and side with sealant DOBEFIL 60/Hardner mixture,making connection with secondary lead of isolating transformers etc complete as required as per ICAO specification and as per site requirement. |
| 5 | Supply of 450 mm height C.I isolating transformer housing box, water tight round type, metal container of outside size 330 mm made of 10 mm thick cast iron moulding all round, except the top surface, which is 15 mm thick cast iron moulding and having two / three nos. clear hole at side surface centre 75 mm above bottom surface and a hole at the front surface 250mm height from bottom as required suitable to receive of 50 mm outer dia. HDPE/G.I. pipe etc as required. The box should have two SS earth bolts of M10 x 30 mm tapped inside near the hole away from the hole centre and having a drain hole at the bottom suitably tapped to receive 15 mm dia, \\"B\\" class GI pipe and having clear opening of 220 mm at the top surface and 6 nos. M10 tapped hole at the hole centre 260 mm to receive dummy base plate,bolts and confirming to tenders technical specifications, terms & conditions etc. complete as required. Triple Hole type. |
| 6 | Supply of 300 mm height C.I isolating transformer housing box, water tight round type, metal container of outside size 330 mm made of 10 mm thick cast iron moulding all round, except the top surface, which is 15 mm thick cast iron moulding and having one no. clear hole at the front surface at height 100 mm from bottom suitable to receive of 50 mm outer dia. HDPE/G.I. pipe etc as required. The box should have two SS earth bolts of M10 x 30 mm tapped inside near the hole away from the hole centre and having a drain hole at the bottom suitably tapped to receive 15 mm dia, \\"B\\" class GI pipe and having clear opening of 220 mm at the top surface and 6 nos. M10 tapped hole at the hole centre 260 mm to receive dummy/light fixtures base plate,bolts and confirming to tenders technical specifications, terms & conditions etc. complete as required. |
| 7 | Installation of 450mm height C.I. transformer housing boxes with a base concrete of 1:3:6 of size 630x630x100mm thick, all round concrete of 1:2:4 of 150mm thick, top sloped with 1:2:4 cement including soil excavation, providing and fixing 300mm long 15mm dia \\"B\\" class GI pipe with check nut for drainage of water along with levelling, earth connection etc. as per confirming to tenders technical specifications, terms & conditions etc. Complete and as directed by E-I-C. |
| 8 | Installation of 300mm height C.I. transformer housing boxes on sholder of Delta taxiway /Apron along with the civil works at suitable depth and making suitable slope of cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of raised height with existing surface including providing along with levelling,earth connection etc. as per confirming to tenders technical specifications, terms & conditions etc. complete and as directed by E-I-C. |
| 9 | Supply of M.S. dummy plate of 10mm thickness suitable for installation on the existing transformer CI housing box of 330mm dia with 6 Nos holes suitable to receive M10 SS bolts etc complete as required. |
| 10 | Installation of old/New dummy base plate on the existing CI housing box/Collar as per site requirement along with providing & fixing of the 3mm thick new neoprene rubber gasket,M10 SS Bolts,washer etc complete as required. |
| 11 | Supply of 1CX6 sqmm. size of stranded annealed copper conductor, 5 KV grade, PVC insulated , PVC sheathed , unshielded, antitermite and antirodent treated Air Field cable and confirming to IS:1554 Part-II as ammended uptodate and as per specification. |
| 12 | Laying of one number PVC insulated and PVC sheathed power cable of grade from1.1 KV but not exceeding 5KV of size not exceeding 16 sqmm. in the existing RCC / Hume / HDPE/Stoneware / GI pipe complete as required. |
| 13 | Supply of 50 mm outer dia. HDPE pipe as per IS:4984:2016, Material Grade:PE 100, PN 10 and as per specified in particular specification. |
| 14 | Laying of 50 mm dia outer dia. HDPE/DWC pipe in the existing trench/masonary open duct including coupling, splicing,jointing of pipe etc complete as required. |
| 15 | Supply & fixing of hard PVC checknut suitable for 50mm outer dia HDPE/DWC Pipe in existing CI housing box etc complete as required. |
| 16 | Supply of 6 sqmm, 5 KV grade plug and receptacle of type 1 class B connector and suitable field attachment with 5 KV grade PVC insulated PVC sheathed single core copper conductor cable as required. |
| 17 | Supply of 2x2.5 sqmm secondary lead made out of multi standard copper conductor EPR insulated & PCP/TCP/CPE sheathed, anti-terminate & anti rodent treated 1.1 KV grade AGL cable as specified in particular specifications as required. |
| 18 | Supply of 2CX2.5 sqmm and 0.3 mtrs long copper conductor two pin secondary lead male/female suitable for airfield lighting system as required. |
| 19 | Laying of following sizes outer dia HDPE pipe through HDD trenchless method direct in ground upto depth of 3.0 meter (i/c under Runway/Taxiway/Road) in all type soil including coupling, splicing of pipe, providing nylone rope in spare pipes as per requirement etc complete as required in all respect as per specification. 50mm dia. |
| 20 | Supply of 5 KV grade 50 HZ series type isolating Transformers, of following rating encapsulated in polyester resin, finally with neoprene rubber with primary and secondary connections as required.(15 W, 6.6/6.6 Amp). |
| 21 | Installation, Testing and Commissioning of new Isolating Transformer i/c connection with primary and secondary lead cable etc complete as required. |
| 22 | Supply of Elevated type uni-directional LED based Runway Guard light with 02 Nos. together elevated type fixed focus medium intensity features,flashing yellow lights,IP67 protection complete with all aceessories i/c encasulated 6.6A electronic converter,LED driver, lense, reflector,frangible coupler,base plate,two pole plug etc and suitable to works on 2.8 A to 6.6A series circuit powered by existing CCR .Photometrics of the fitting arrangment shall confirm to ICAO annex 14 vol 1 and confirming to relevant standards, specifications as per the requirements. |
| 23 | Installation,Testing & Commisssioning of Elevated type LED uni directional Runway Guard Light with all accessories etc complete on existing taxiway for runway holding position as per ICAO annex 14 and as directed by EIC. |
| 24 | Earthing with G.I pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt complete as required. |
| 25 | Providing and laying earth connections, from earth electrode with 6 SWG dia, G.I wire in 15mm dia, G.I pipe from earth electrode as required. |
| 26 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
| 27 | Structural steel work in built up chequered plate(8mm) work including cutting, hoisting, fixing in partition and applying a primary coat of approved steel primer etc. all complete as required. |
| 28 | Supplying and Drawing 4 sqmm dia FRLS PVC insulated annealed copper conductor, unarmoured cable in the existing surface/recessed steel/PVC conduit as required |
| 29 | Excavation & refilling for cable trench in soft soil depth upto 1.2 M including dressing of sides and disposal of surplus excavated soil within a lead of 50 metres as directed by EIC. |
| 30 | Cutting of pipe groove with kerf cutting machine of suitable size & depth for laying of GI/HDPE Pipe/Secondary lead in bituminous/PQC area of runway i/c kerfing, chiselling, cleaning and refilling the groove with suitable concrete /sealant DOBEFIL 60/Hardener and making good including etc. complete as required as per direction of EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender