Tender For Replacement Of Ht Ring With Back Feed Configuration And Associated Works At Af Station Halwara Under Ge (Af) Halwara
Tender Value
1.40 Crore
Estimated cost
Bid Submission
25 Nov 2026
25 days left
EMD
2.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Ht Ring With Back Feed Configuration And Associated Works At Af Station Halwara Under Ge (Af) Halwara
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5 m wide and not exceeding 1.5 m depth for foundation laying of cables etc and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 2 | Returning filling including spreading, leveling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and directed by Engineer-in-Charge. |
| 3 | Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point as in soil complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for sand cushioning (dry) in trenches/ducts for protection of UG cables( below, above and around the UG cable laid) of 23 cm spread thickness (8 cm in depth before laying the cable and 15 cm in depth after laying the cable ) and consolidated ( punned) of 18 cm thickness complete all as specified and as directed by Engineer-in-Charge.Note :- Punned thickness of sand cushioning will be measured, for the payment purpose. |
| 5 | Material and labour for precast unreinforced concrete cable cover class HV type 1 flat size 300mmx180mm and thickness 40mm ISI marked laid flat dry and adjacent to each other, perpendicular to the central axis of the cable in trenches complete all as specified and directed by Engr-in-Charge. |
| 6 | Material and labour for precast unreinforced concrete cable cover class LV type 1 flat size 250mm X 150 mm and thickness 40 mm, ISI marked laid flat, dry and adjacent to each other, perpendicular to the central axis of the cable in trenches complete all as specified and directed by Engr-in-Charge. |
| 7 | Material and labour for boring holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine or by using manual manpower and boring tools, using welded/socketed joints under roads/hardstandings/floors etc complete all as specified and directed by Engr-in-Charge. |
| 8 | Material and labour for GI Pipe 80 mm bore, light grade laid in trenches, under road, under floor, fix to wall with fixing arrangement with suitable size of MS clamps made from 40 X 3mm size flat iron including nuts, bolts and washers or along the pole with fixing arrangement etc for cable protection complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking out old Unserviceable HT cable from different locations laid in trenches, along the pole etc including earth work complete all as specified and directed by Engr-in-charge. |
| 10 | Supply , laying & testing Cable XLPE 11000 Volt 3 core 95 sqmm insulated screened PVC bedded, Galvanised steel strip or wire armoured , electric power cable, heavy duty, with stranded aluminium conductor complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply & Fixing servo control voltage stabilizer for automatic operation three phase naturally oil cooled copper wound indoor type & designed for input voltage variation between 300 V to 480 Volt with output volatge stabilized at 415 V with accuracy + 2.5 % and speed of correction 8 volts per second and of capacity 160 KVA complete all as specified and directed by Engr-in-Charge. |
| 12 | Supply & Fixing servo control voltage stabilizer for automatic operation three phase naturally oil cooled copper wound indoor type & designed for input voltage variation between 300 V to 480 Volt with output volatge stabilized at 415 V with accuracy + 2.5 % and speed of correction 8 volts per second and of capacity 630 KVA complete all as specified and directed by Engr-in-Charge. |
| 13 | Material and labour for feeder pillars box out door type made out of MS sheet (CRCA) of thickness not less than 3.15 mm, of size 150cm x 65cm x 90cm with copper bus bar strip 3 Nos of size 100 cm in length, 4 cm in width and 6 mm in thickness suitable for 11000 volt grade mounted on HT porcelain insulator, front opening door having two leaf braced with hinged, mounted on 4 Nos angle iron 100 mm x 100 mm x 8 mm, 90 cm long duly welded with box and grouted in PCC 1:3:6 type C-1 using 20 mm graded mechnically crushed stone aggregates block of size 30 cm x 30 cm x 15 cm, top of box shall be of MS sheet duly bent in slope, tapper with projection of 20 mm on all side, weather / vermin proof with high quality of rubber beeding on panel door, cable entry arrangements at bottom including earthing terminals 2 Nos at both side duly painted with red stove enamelled paint 2 coat over a primer coat including taking down/out feeder box as existing at site complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 14 | Material and labour for feeder pillars box out door type made out of MS sheet (CRCA) of thickness not less than 3.15 mm, of size 150cm x 65cm x 90cm with copper bus bar strip 3 Nos of size 100 cm in length, 4 cm in width and 6 mm in thickness suitable for 11000 volt grade mounted on HT porcelain insulator, front opening door having two leaf braced with hinged, mounted on 4 Nos angle iron 100 mm x 100 mm x 8 mm, 90 cm long duly welded with box and grouted in PCC 1:3:6 type C-1 using 20 mm graded mechnically crushed stone aggregates block of size 30 cm x 30 cm x 15 cm, top of box shall be of MS sheet duly bent in slope, tapper with projection of 20 mm on all side, weather / vermin proof with high quality of rubber beeding on panel door, cable entry arrangements at bottom including earthing terminals 2 Nos at both side duly painted with red stove enamelled paint 2 coat over a primer coat including taking down/out feeder box as existing at site complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender