Tender For Provn Of Drone Protection Nets For Blast Pens At Af Stn Bhisiana Under Ge (Af) Bhisiana
Tender Value
72.80 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
22 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Drone Protection Nets For Blast Pens At Af Stn Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5 mtr wide and not exceeding 1.5mtr depth for foundation in soft/loose soil & getting out complete all as specified and as directed by Engr-in-charge. |
| 2 | Material and labour for PCC 1:4:8 type D-2 using (40mm graded stone aggregate) as in foundation, filling and mass cocrete complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for formwork to sides flat rough finished surfaces of concrete foundations footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and as directed by Engr-in-charge. |
| 4 | Material and labour for formwork to sides of rough finished surfaces of square concrete columns complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for RCC (nominal mix) type B1 1:2:4 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs, under reamed piles and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for RCC (nominal mix) Type B1 (1:2:4) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-charge. |
| 8 | Returning filling in including spreading, levelling, watering & well ramming in layers not exc 25cm thick for soft/loose soil complete all as specified and as directed by Engr-in-charge. |
| 9 | Removing excavated material at a distance of 1.5 km but n.exc 5 km and depositing where directed complete all as specified and as directed by Engr-in-charge. |
| 10 | Supply and fixing Mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe-410 grade 250 quality A including distance pieces complete all as specified and as directed by Engr-in-charge. |
| 11 | Supply and fixing mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long and dia neck exc 12mm but n exc 20mm complete all as specified and as directed by Engr-in-charge. |
| 12 | Supply and fixing Mild Steel for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending andwelding angles, as necessary, gusset plates, riveting, etc.. ,conforming to Fe.290.Gde-E-165 including distance pieces, cleats and along with roller, channel, wheel, bearing placing in proper way for smooth opening and closing of any type of net so that folding the net at side of the blast pen both side also fixing iron nut round shape not exceeding 50mm dia at bottom of net so that net hanging in straightway etc complete all as specified and as directed by Engr-in-charge.Note : All necessarry arrangement for opening and closing of net like roller, wheel , channel angle , bearing and stainless steel wire, with gear operating system for opening and closing of net and other section, machanism all shall be fixed and installed in proper way so that net can be opened and closed smoothly from one place all arrangement should be measured and paid under this item in Kg and nothing extra shall be paid. |
| 13 | Material and labour for Preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge. |
| 14 | Supply and fixing of Anti Drone Net polyolefin all weather proof CO-polymer nets using by machine knotting CNC machines with DSLS technology for anti slip knotting with steam set for greater dimensional stability and knot firmness, Diameter of the Braded-2.5 mm(+-10%), Mesh size : 25mm x 25mm (+-2mm), Square Mesh, Twine breaking strenght; 78Kgf min, Mesh Breaking Strength: 85 Kgf, knot breaking strength: 150 Kgf min of colour: UV Green as per direction by Engineer-in-charge and as approved by GE complete all as specified and as directed by Engineer-in-charge.Note:- 1. Anti Drone nets are to be installed on both mouths of blast pens.2. 03 Nos of Pullies are to be provided on each mouth of blast pen and cost of the same is deemed to be included in the unit rate quoted by the Contractor.3. Size of Blast Pens varies as per ground conditions.4. Tenderers are advised to visit the site before quoting their tender. Nothing extra shall be admissible after quoting the tender.5. All the new steel members/ steel surfaces shall be prepared and painted with two coats synthetic enamel paint over one coat of red oxide zinc chrome primer.6. All necessary arrangements will be made like scaffolding, ladder, cradles etc. and will be procured by the Contractor for smooth.7. All safety measures and insurance shall be made by the Contractor for all labours without any extra cost to the department. |
| 15 | Material and labour for 100 mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed by Engr-in-charge. |
| 16 | Material and labour for Machine pressed precast concrete interlocking paver block grey coloured any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment over 25 mm thick sand cushioning as specified complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender