Tender For Addn / Altn Of Roof Sheet And Other Allied Works At Bldg No T-8 At Base Victualling Yard And Provision Of Lightening Protection & Connected Works For Communication Entities Of Ku-Band Statcom, C-Band Satcom, Dcn, Sdr And Afnet Equipment Ro
Tender Value
45 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn / Altn Of Roof Sheet And Other Allied Works At Bldg No T-8 At Base Victualling Yard And Provision Of Lightening Protection & Connected Works For Communication Entities Of Ku-Band Statcom, C-Band Satcom, Dcn, Sdr And Afnet Equipment Room At Port Mout Under Ge Minniebay, Sri Vijaya Puram (8903/E8)
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 2 | Dismantling of plain or corrugated steel sheeting any gauge thickness or similar pattern roof coverings complete all as specified and directed. |
| 3 | Rolled sections Fe 410-W (Gde E- 250) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 4 | M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 5 | M&L Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming (Beam, tee, angle, Channel, hollow sec or flat sections) including distance pieces, cleates, gusset paltes etc Fe 410-w grade E-250 quality A complete all as specified directed. |
| 6 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and directed. |
| 7 | S & F Mild steel screw bolts (machine made) of any dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as specified and directed. |
| 8 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 9 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed. |
| 10 | S&F aluminium flat 40 X 6mm size as wind tie fixed with 50mm/75mm aluminium self staging screws complete all as specified and as directed. |
| 11 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 12 | S & F only 4 mm Plain sheet glass ordinary quality, in square not exc 0.5 sqm each complete all as specified and directetd. |
| 13 | S & F only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including taking down complete all as specified and directed. |
| 14 | Providing and fixing wind operated turbo ventilator along with suitable base in FRP matching to the roofing profile. Necessary flashings to make the interface between the sheet and the turbo base should be considered of 600mm throat dia complete all as specified and directed. |
| 15 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 290 (Gde E-165) complete all specified and directed. |
| 16 | S&F Mild steel 1.25mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 17 | M&L for Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 18 | M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in sub base, plinth protection etc complete all as specified and directed. |
| 20 | M & L for providing cement concrete 1:3:6, type B1 (using 40 mm graded stone aggregate) as in surface channel and drains etc complete all as specified and directed. |
| 21 | M & L for Cement plaster Setting coat 3mm thick, trowelled to even and smooth finish complete all specified and directed. |
| 22 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 23 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair without using extra cement complete all as specified and as directed. |
| 25 | M&L for glazed ceramic tiles 350 x 250x 7mm / 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and directed |
| 26 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces complete all as specified and directed. |
| 27 | M&L for 150mm dia PVC (SWR) rain water harvesting pipes single socketed in any length with rubber ring joints fixed to walls/Vertical complete all as specified and directed. |
| 28 | Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil all as specified and directed. |
| 29 | Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc., complete all as specified and directed. |
| 30 | M & L PCC (1:4:8) Type D2 (using 40mm graded aggregte) in foundations, filling and mass concrete complete all as specified and as directed |
| 31 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) etc., complete all as specified and directed. |
| 32 | M&L for cement concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 33 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed. |
| 34 | M&Lfor virtified ceramic tiles 10mm thick (square/ rectangular) polished heavy duty vertified tiles 400x400 size in floors, steps, raisers, etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 35 | M & L for Tripod chemical earthing complete with copper earthing electrode 50mm3mtr long with strip terminal 40x5mm,90mm length with 3 hole of 10mm with the pipe thickness of 1.2mm non exothemic welding inner electrode 16mm solid rod,filled with highly conductive compound non corrosive non hydroxylation, inclusive of 2bag of chemical earthing electrode 50kgs, 25kg bag each with the chemiccal composition carbon as graphite 80%, AI203 18-32%, FE203 4-11%, CALCIUM CARBON, COPPER 10 to 15%.Moisture content 1.06%, Choloride 300ppm, cadmium not detected,antimony 100pm for ROCKY area as specified and directed by Engr-in-Charge |
| 36 | M&L earth continuity conductor copper strip for main earthing strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.all as specified and directed by Engr-in-Charge |
| 37 | M&L for laying of protection pipe size 50mm, medium grade, galvanised with all fittings laid in trenches complete all as specified and directed. |
| 38 | S&F Lightening even counter, totally autonomous, IP-65, Dimension 150 x 65 x 52mm, Registry minimum 1 kA,Temp -25 to +70 celcius made of polycarbonate with support sheet and screws including making provision for fixing on down conductor of existing Air terminals all as specified and directed at site. |
| 39 | S&F test point terminal block made out of gun metal or phosphorous bronze size 150x150x75 mm depth , drilled , cutting upper & lower portion for incoming & outgoing including double insulators two coat of synthetic enamel paint complete all as directed at site by Engr in charge. |
| 40 | Supply and fix air termination single pointed aluminium 12 mm dia & 300 mm long to be fixed on GI tube40mm bore, medium grade (lenth to be directed by Engr in Charge) with clamps nuts bolts and washer all as directed at site by Engr in charge. Note GI tubing will be measured and paid seperately under relevent item of the schedule |
| 41 | S&F porcelion insulators 15 BMD size T type with nut bolts / screws for fixing of copper / aluminium / GI strips on roof/walls etc inculding removal of exiting broken insulator with nut bolts washer all as specified and as directed at site by Engr in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender