Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #58281148

Tender For special Repair (E/M) To Bldg No P-02 And Provn Of 01 X 160 Kva 3 Ph Transformer Alongwith Allied Infra For Nfs Under Ge 881 Ews

Issued by Statutory Bodies & Commissions/Committees · Poonch, Jammu and Kashmir
Tender Value
24.39 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
48780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair (E/M) To Bldg No P-02 And Provn Of 01 X 160 Kva 3 Ph Transformer Alongwith Allied Infra For Nfs Under Ge 881 Ews

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 16-Nov-2026 CORRIGENDUM Other 21-Nov-2026

BOQ

Name of Work:- SPL REPAIR (E/M) TO BLDG NO P-02 AND PROVN OF 01 X 160 KVA 3 PH TRANSFORMER ALONGWITH ALLIED INFRA FOR NFS UNDER GE 881 EWS
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: SPL REPAIR (E/M) TO BLDG NO P-02 AND PROVN OF 01 X 160 KVA 3 PH TRANSFORMER ALONGWITH ALLIED INFRA FOR NFS UNDER GE 881 EWS Contract No : GE/PNH-73/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Taking down carefully aluminium/copper point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc complete all as required and keeping serviceable light fittings in safe custody for reuse in the work as specified and directed.
3Point wiring on wall/ surface in PVC casing caping of size 20mm complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including PVC casing caping and provisining of 1.5 sqmm FRLS PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly with sunk type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheet top cover for mounting of fittings,switches, sockets outlets,regulators etc complete for the following type of points:-
4All as per item No.02 but one light/Fan point controlled by one switch 5 amp one way complete all as specified and directed.
5All as per item No.02 but One 3 pin 5 Amps socket point controlled by one switch on same board.
6All as per item No.02 but One 3 pin 5 Amps socket point controlled by one switch on independent board.
7All as per item No.02 above but point wiring with 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated & unsheathed cable 1100 volt grade and 2.5 sqmm FRLS PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.
8Submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through and including PVC casing caping 25mm width ISI marked as per IS specification fixed on wall/ceiling including accessories and including provn of PVC insulated 4 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site.Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, casing caping and its accessories will be measured as one length.
9Switch piano flush type single pole, one way 6 amp complete all as specified and directed
10Socket outlet 2 in 1 , 3 pin 5 A flush type complete all as specified.
11Switch piano flush type single pole, one way 15 amp complete all as specified and directed .
12Socket outlet 2 in 1 , 3 pin 15 A flush type complete all as specified and directed.
13Ceiling rose 65x50mm three terminals 230 volt complete all as specified and directed.
14Step type fan regulator electronic type in 5 step, 100 watt capacity switch/socket type complete all as specified and directed.
15Lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting complete all as specified.
16Supply and fixing inverter LED lamp, CDL 9 watt, B22 base, complete all as specified and directed.
17Supply and fixing in replacement inverter LED batten 1x 20W, with square profile and polycarbonate channel, lithium iron battery with charging time of 8 to 10 hours and backup tile upto 04 hours with driver, holder incl LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
18Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
19Supply and fixing in replacement distribution board double door type(for incoming MCCB & outgoing MCBs) TPN 4 way vertical type sheet, steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and as directed.
20Supply and fixing in replacement sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 4 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified and directed.
21Supply and fixing in replacement MCCB 100 Amp, 4 pole 16 KA with adjustable thermal release fixed magnetic protection complete all as specified and directed.
22Supply and fixing in replacement MCBs SPN 63 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed.
23Supply and fixing in replacement MCBs SPN 40 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed.
24Supply and fixing in replacementMCBs SP 5 to 32 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed.
25Supply and fixing in replacementCeiling fans complete with three blade, down rod, accessories 230V, 1200mm sweep, BLDC fan with 5 star rating complete all as specified and as directed.
26Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complet all as specified and directed.
27Exhaust fan, Steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.
28Supply and fixing in replacement Energy efficient LED light fitting, 35W, input voltage 110V to 280VAC, 50Hz with ingress protection IP 66, LM 80, stranded luminries with efficiency 100lumen/Watt, with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70, PF>0.95, with short circuit & reverse circuit protection against 10kV high surges, minimum 25000 burning hours (life), operating temperature 1 to 50 degree Celcius, rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 35W=10%W, rated lumens, 120 degree view angle, constant current type driver having THD<10%, including all fixing arrengment like clamps, nuts, bolts, washers, 35W LED rod lamp (havng PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc.including bracket complete all as specified and as directed.
29Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core including taking down existing unserviceable cable complete all as specified and directed.
30Dry river sand as in sand cushioning to under ground cable including punning down all as specified and directed.
31Brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed.
32Cutting to road/cement path/hard standing/Road for providing GI pipe 40mm both end socketed for passing armoured cable incl making good the disturbed surface complete all as specified.
33GI tubing 40 mm bore light grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position all as specified and directed.
34Supply and fixing in replacement Bus bar chamber of size 600x600x450mm suitable of 3 phase 433V outdoor type fabricated out of 3.15mm thick MS sheet with 300A rated aluminium bus bar 4Nos.PVC sleeves (coloured red, yellow, blue and black) with suitable locking arrangments and four legged angle iron stand made of angle iron of size 40x40x6mm duly grouted in and including foundation in PCC 1:2:4 type C1 using 20mm graded stone aggregates alongwith all necessary cable connections, lugs and cable glands including applying two coats of synthetic enamel paint (of approved tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed.
35Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate alternate layers of charcoal dust and salt to a packed thickness of each layer15cm on all side and including connected to and including galvanized iron earth lead strip 25 x 4 mm size upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earthing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 15mm bore medium grade,wire mesh and lugs,GI protection pipe,40mm bore light grade,7.5 mtr long for protection of earth lead upto test point etc including taking down existing unserviceable earthing complete all as specified and as directed.
36Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate alternate layers of charcoal dust and salt to a packed thickness of each layer15cm on all side and including connected to and including galvanized iron earth lead wire 4 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earthing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 15mm bore medium grade,wire mesh and lugs,GI protection pipe,40mm bore light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and as directed.
37Supply, Installation, Testing and Commissioning of Outdoor Type, Oil Immersed, Naturally Cooled (ONAN), Copper Wound Distribution Transformer of 160 kVA capacity, suitable for operation on 11 kV, 3 Phase, 50 Hz HT supply and delivering 433 Volts, 3 Phase, 4 Wire, 50 Hz LT supply, Energy Efficiency Level-3, conforming to IS 1180 (Part-1): Latest Edition, IS 2026 and other relevant Indian Standards, complete with all standard accessories, fittings and first filling of transformer oil.The transformer shall be Core Type, Double Copper Wound, Oil Immersed ONAN, having Delta Connected HV Winding and Star Connected LV Winding with Vector Group Dyn11, neutral brought out on LV side, suitable for outdoor installation with Off Circuit Tap Changer (OCTC) having tapings of +5%, +2.5%, -2.5% and -5% on HV side.The transformer shall have 4% impedance and losses as per IS 1180 (Part-1).The temperature rise shall not exceed: (i) 45°C for top oil (ii) 55°C for windings (by resistance method)above an ambient temperature of 40°C under continuous full-load operation.The transformer shall comprise the following:HV Side:-(a) Three porcelain/polymer bushings suitable for 11 kV complete with tinned copper terminals, connectors, nuts and washers.LV Side:-(a) One weatherproof LT cable box complete with four porcelain/polymer bushings, tinned copper terminals, cable glands, gland plate and terminal connectors. (Contd...)
38item 36 (Contd...)Accessories:- (i) Conservator tank complete with oil level gauge. (ii) Silica Gel Breather complete with first filling of indicating silica gel.(iii) Explosion vent/Pressure Relief Device. (iv) Magnetic Oil Level Gauge.(v) Air Release Valve.(vi) Drain cum Filter Valve (vii) Oil Filling Hole with cap (viii) Thermometer Pocket (ix) Dial Type Oil Temperature Indicator (OTI), vapour pressure type, 100 mm dial, range 0–120°C, complete with maximum temperature pointer and reset arrangement (x) Four detachable bi-directional rollers. (xi) Lifting lugs.(xii) Jacking pads (xiii) Earthing terminals (02 Nos.) on tank body suitable for 32 × 6 mm GI strip.(xiv) Separate neutral bushing outside LT cable box with independent earthing terminal.(xv) Rating plate (xvi) Terminal marking plate.(xvii) Danger Notice Plate. (xviii) Oil sampling valve.(xix) Anti-vibration pads (where applicable).(xx) Marshalling box (if recommended by manufacturer).Transformer Oil:-The transformer shall be supplied with first filling of new, unused, inhibited transformer oil conforming to IS 335, filtered and tested with dielectric strength not less than 60 kV (2.5 mm electrode gap) before commissioning.CopperAll windings shall be manufactured from Electrolytic Grade Copper of minimum 99.97% purity. Manufacturer's test certificates for copper purity shall be submitted to the Engineer-in-Charge.
39item 36 (Contd...)Factory Tests:-The transformer shall be routine tested in accordance with IS 2026 and IS 1180, including:(i) Insulation Resistance Test (ii) Turns Ratio Test (iii) Winding Resistance Test (iv) No Load Loss Test(v) Load Loss Test (vi) Impedance Voltage Test (vii) Applied Voltage Test (viii) Induced Voltage Test(ix) Oil BDV TestRoutine test certificates shall be submitted before dispatch.Installation & CommissioningThe scope shall include unloading, shifting, positioning on prepared foundation, assembly of accessories, oil topping-up if required, cable termination, earthing connections, testing, commissioning and making the transformer ready for satisfactory operation.Note1. Pre-dispatch inspection shall be carried out in the presence of the representative of the Accepting Officer/Engineer-in-Charge.2. All testing instruments, T&P, labour and consumables required for inspection, testing and commissioning shall be arranged by the contractor, and the cost thereof shall be deemed to be included in the quoted rate.3. PCC foundation, transformer plinth, fencing etc all are included in the quoted rate.4. Earthing, HT/LT cables and cable terminations shall be measured and paid separately unless specifically included elsewhere in the BOQ.5. The transformer shall be suitable for installation at an altitude of 950 m above Mean Sea Level (MSL) without derating.
40Supply, Installation, Testing and Commissioning of Automatic Servo Controlled Voltage Stabilizer, Three Phase, Naturally Oil Cooled (NOC), outdoor Type, suitable for continuous duty operation, having a rated capacity of 160 KVA, designed for an input voltage variation from 190 V to 480 V, 110V-277V (Ph-N) and maintaining a stabilized output voltage of 415 V ±1%, with correction speed not less than 50 Volts per second, operating on 415 V, 3 Phase, 4 Wire, 50 Hz AC supply, complete with copper wound buck-boost transformer, continuously variable dimmer (variac), servo motor, microprocessor/digital controller, automatic/manual mode selector, digital voltmeter and ammeter for input and output, phase-wise voltage indication, ON/OFF indication, bypass arrangement over-voltage protection, under-voltage protection, overload protection, short-circuit protection, phase failure and phase reversal protection, MCCB incomer and outgoing of suitable rating, neutral and earth bus bars, cable glands, lugs, internal copper wiring, earthing terminals, oil level indicator, temperature indicator, lifting hooks, ventilation arrangement, floor mounting with suitable base frame, complete with PCC foundation, grouting, testi3. PCC foundation, transformer plinth, fencing etc all are included in the quoted rate.ng, commissioning and all accessories required for satisfactory operation, conforming to relevant IS specifications, complete all as specified and directed.General Notes:-1. The stabilizer shall be suitable for continuous operation at 950 m above Mean Sea Level (MSL).2. The unit shall be factory tested, and routine/type test certificates shall be submitted before installation.3. The contractor shall carry out installation, testing, commissioning and load testing at site.4. The quoted rate shall include all accessories, interconnections, internal wiring, terminations, hardware, foundation bolts and commissioning required for complete installation.5. The stabilizer shall be compatible with the 160 KVA Distribution Transformer provided under this contract.6. PCC foundation, Voltage stabilizer plinth, fencing etc all are included in the quoted rate.
41Supply, laying, testing and commissioning of 11 kV Grade, XLPE insulated, Aluminium Conductor, Armoured Power Cable, 3 Core × 95 sq.mm, earthed system, conforming to IS 7098 (Part-2): Latest Edition, suitable for operation on 11 kV, 3 Phase, 50 Hz system, comprising stranded compacted aluminium conductor, conductor screening with extruded semi-conducting compound, XLPE insulation, insulation screening with extruded semi-conducting compound and copper metallic screen, PVC inner sheath (ST-2), galvanised steel strip armouring, PVC outer sheath (ST-2), black, UV resistant and FRLS where specified, laid directly in prepared trenches, GI/RCC/Hume pipes, ducts, cable trenches, along poles, walls, structures or equipment as required, including dressing, clamping, saddles, cable identification tags, route markers where applicable, pulling, positioning, testing for continuity and insulation resistance, complete all as specified and directed.
42Supply, laying, testing and commissioning of LT XLPE insulated, PVC bedded, Galvanised Steel Strip (GST)/Galvanised Steel Wire (GSW) armoured, PVC sheathed heavy duty Aluminium Conductor Power Cable, 1100 Volts grade, 3.5 Core × 95 sq.mm, conforming to IS 7098 (Part-1): Latest Edition, comprising stranded compacted aluminium conductor, XLPE insulation, extruded PVC inner sheath, galvanised steel strip/wire armouring and PVC outer sheath, laid directly in prepared trenches, on floors, in cable trenches, through GI/RCC/Hume pipes, under road crossings or along structures as required, including dressing, clamping, saddles, cable identification tags, pulling, positioning, testing for continuity and insulation resistance, complete all as specified and directed.
43Taking down unsv PCC pole, Supplying, install and errect in true vertical position steel tubular swaged welded pole, 11.0 meter long, conforming to IS-2713 part-II, type 410 SP-49, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc., pole made out of ERW M.S. tubing including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bends at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole No the black paint by stenciled letters/figures of 8cm height complete all as specified and directed by Engr-in-charge.Note: Excavation, earth work and PCC in foundation of poles, coping etc shall be measured and paid separately in respected items.
44Fabrication, supply and fixing of cross arms, bracings, supports, clamps (including stay clamps and clamps for fixing GI tubes for passing cables), back plates and other miscellaneous structural members, fabricated from standard MS sections such as angles, flats, channels and plates, including cutting, bending (hot or cold), drilling, punching, welding, grinding, fitting, nuts, bolts, spring washers, plain washers and all fixing accessories, complete with dismantling and removal of existing damaged/broken cross arms, bracings, supports, clamps and associated fittings, making good the installation, and applying one coat of approved red oxide/zinc chromate primer followed by two coats of aluminium paint to all fabricated steel surfaces after proper surface preparation, complete all as specified and directed.
45Supply, fabrication and fixing of Anti-Climbing Device, spike type, fabricated from MS round bars, square bars and flats of approved size, made in two equal halves to suit the cross-section of the steel tubular swaged pole, complete with MS spikes welded to the frame, nuts, bolts, washers, clamps and all fixing accessories, including cutting, bending, drilling, welding, grinding, fitting, one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint over the fabricated surface, complete all as specified and directed.
46Supply and fixing of Heat Shrink Type Outdoor Cable End Termination joint Kit, suitable for 11 kV (Earthed) Grade, 3 Core × 95 sq.mm XLPE insulated, Aluminium Conductor, Armoured Power Cable, conforming to IS 7098 (Part-2), complete with stress control tubes, anti-tracking insulating tubes, heat shrink breakout, rain sheds, sealing mastic, copper screen continuity arrangement, armour earthing accessories, aluminium compression lugs, ferrules, glands (where applicable), nuts, bolts, washers and all other jointing materials and accessories as recommended by the manufacturer, including preparation of cable ends, crimping, termination, earthing, heat shrinking, testing and commissioning, complete all as specified and directed.
47Supply and fixing of pin type procelain insulator, suitable for 11 kV overhead line, glazed vitreous procelain, brown colour, conforming to IS 731 and relevant Indian Standards, complete with hot-dip galvanised mild steel pin/spindle, galvanised iron washers, galvanised nut, locking arrangement and all necessary fixing accessories, suitable for mounting on cross arms of 11 kV overhead distribution line, including removal of damaged insulator (where required), fixing, alignment and making complete in all respects, complete all as specified and directed.
48Supply, Installation, Testing and Commissioning of 11 kV Outdoor Gang Operated Air Break (GOAB) Switch, Triple Pole, Single Break, Horizontal/Vertical Isolation Type, suitable for 11 kV, 3 Phase, 50 Hz overhead distribution system, having rated voltage 12 kV, rated current 200 Amps and rated short-time withstand current as per relevant IS/IEC standards, complete with hot-dip galvanised MS channel support structure, operating mechanism with manual operating handle, locking arrangement in both ON and OFF positions, interlocking arrangement, operating rod fabricated from 25 mm dia medium grade GI pipe conforming to IS 1239, high-pressure copper alloy contacts, arcing horns, phosphor bronze contact springs, porcelain/polymer post insulators (12 Nos.), terminal connectors, nuts, bolts, washers, clamps, danger notice plate, earthing terminals and all standard fittings and accessories, including erection, alignment, adjustment, testing and commissioning, conforming to IS 9921 (Part-I), IS 13118 and other relevant IS/IEC specifications, complete all as specified and directed.Note:-(i) The GOAB switch shall be suitable for mounting on a double pole structure.(ii) All structural steel members shall be hot-dip galvanised after fabrication.(iii) The operating mechanism shall permit operation from ground level and shall have a padlocking facility in both ON and OFF positions.(iv) All nuts, bolts, washers and fasteners exposed to the atmosphere shall be hot-dip galvanised or stainless steel.
49Supply and fixing of Danger Notice Plate for HT installation, size 250 mm × 200 mm, fabricated from 1.6 mm thick Mild Steel sheet, vitreous enamelled white with letters, figures and conventional skull and cross-bones symbol in signal red colour, conforming to IS 2551 and relevant Indian Electricity Rules/CEA Regulations, complete with MS clamps, nuts, bolts, washers and all necessary fixing accessories, securely fixed to steel tubular poles, structures, equipment or supports as directed, complete all as specified and directed.
50Supply, installation, testing and commissioning of 11 kV, 9 kV rated, Gapless Metal Oxide (ZnO) Lightning Arrester, Station/Distribution Class, Polymer Housed, nominal discharge current 10 kA (8/20 μs) and line discharge capability equivalent to 65 kA, suitable for 11 kV, 50 Hz overhead distribution system, complete with mounting brackets, galvanised clamps, terminal connectors, nuts, bolts, washers, earthing terminal, danger label and all fixing accessories, including connection to phase conductor and earth conductor, testing and commissioning, conforming to IS/IEC 60099-4 and complete all as specified and directed.
51Stay assembly complete with accessories i.e. stay plate 300mm x 300mm x 6mm, galvanised thimbles, GI stay wire 7/4 SWG, loop type insulators, vitreous porcelain, white brown or green of large size with overall dimensions 90mm x 140mm, clearance of hole 25.5mm, etc and all other accessories as shown in electrical plate No 1 on Ser Page No 495 of MES Schedule Part-I (2009) complete including dismantling stay assembly complete all as specified and directed. Note : Stay clamp, excavation and earth work and concrete for stay pit and insulator shall be measured and paid separately.
52Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth for foundation etc. and getting out in hard/dense soil, complete all as specified and directed.
53All as per Item No. 51 above, but for excavation in trenches exceeding 1.50 metres and not exceeding 3.00 metres in depth, complete all as specified and directed.
54Returning, filling in including spreading,leveling, watering and well ramming in layers n.exc 25cm thick in soil completed all as specified and directed.
55Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point as in soil complete all as specified and directed.
56Supply and laying of 75mm dia Double Wall Corrugated (DWC) HDPE cable protection pipe, conforming to IS 16205 (part-24) and IEC 61386 (part-24) , with corrugated outer wall and smooth inner wall, suitable for underground and above-ground installation for protection of HT/LT power cables, complete with approved couplers, end caps, bends ( where required) sealing of pipe ends after complete all as specified and directed.
57Plain Cement Concrete, Type C-2 (1:3:6), using 40 mm graded crushed stone aggregate, laid in foundations for steel tubular poles, RCC/PSC poles, stay assemblies, struts, equipment supports and other similar works, including mixing, placing, compacting, levelling, finishing the exposed surface, curing and all necessary formwork where required, complete all as specified and directed.
58Plain Cement Concrete, Type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, laid as coping to pole foundations, including necessary centering, shuttering/formwork, placing, compacting, finishing the exposed surface smooth and even without the use of extra cement, curing and all incidental works, complete all as specified and directed.
59Plain Cement Concrete, Type D-2 (1:4:8), using 40 mm graded crushed stone aggregate, laid as foundation concrete, levelling course and mass concrete for foundations of equipment, panels, poles, structures and other civil works, including mixing, placing, compacting, levelling, curing and all incidental works, complete all as specified and directed.
60Supply, Installation, Testing and Commissioning of LT Feeder Pillar Box, weather proof, outdoor type, double door, floor mounted, fabricated from CRCA sheet steel of 3.15 mm thickness reinforced with 50 × 50 × 5 mm MS angle frame, suitable for 415 Volts, 3 Phase, 4 Wire, 50 Hz AC supply, complete with front and rear lockable double door shutters, neoprene rubber gaskets, canopy, lifting hooks, powder coated finish over phosphate treatment, IP-55 degree of protection, mounted on PCC foundation complete with grouting, internal wiring with stranded copper conductors, cable glands, lugs, ferrules, terminal blocks, earthing terminals and all necessary accessories, complete all as specified and directed by the Engineer-in-Charge with and including following accessories:Incoming(a) MCCB, TPN, 200 Amps, 36 kA – 01 No. (Incoming)Changeover(a) On Load Changeover Switch, 415 Volts, 4 Pole, 160 Amps – 01 No.Outgoing Feeders(a) MCCB, TPN, 100 Amps, 25 kA – 02 Nos.(b) MCCB, TPN, 63 Amps, 16 kA – 02 Nos.Bus Bars(a) Aluminium Bus Bars, 400 Amps capacity for R-Y-B Phases, Neutral and Earth, colour coded with heat shrink sleeves, mounted on non-hygroscopic SMC/DMC supports – 01 SetMetering(a) Digital Ammeter, 0–300 Amps, complete with Current Transformers (CTs), Ammeter Selector Switch – 01 No.(b) Digital Voltmeter, 0–500 Volts, complete with Voltmeter Selector Switch – 01 No.
61Item 59 Contd..Control & Indications(a) R-Y-B Phase Healthy LED Indication Lamps – 01 Set(b) Complete internal control wiring using PVC insulated stranded copper conductors of suitable size with ferrules, terminal blocks and wiring ducts.(c) Neutral Link, Earth Bus Bar, Cable Glands, Compression Lugs, Ferrules, Identification Labels, Danger Notice Plate, Phase Identification Labels, Nuts, Bolts, Washers, Gaskets and all fixing hardware complete.(d) Panel shall be suitable for bottom cable entry with removable gland plate and shall be factory assembled, wired, tested and inspected before dispatch.(e) Complete erection, testing and commissioning of the feeder pillar including mounting on PCC foundation, alignment, grouting, insulation resistance test, continuity test, functional testing and commissioning, complete all as specified and directed by the Engineer-in-ChargeNote:1. Detailed fabrication drawings and GA drawings of the feeder pillar shall be submitted by the contractor and approved by the Engineer-in-Charge before commencement of fabrication.2. The quoted rate shall be deemed to include PCC foundation, grouting, installation, testing and commissioning.3. All switchgear shall conform to relevant IS/IEC standards and shall be of approved make.4. The feeder pillar shall be designed for outdoor service conditions and suitable for continuous operation under the specified environmental conditions.5. Feeder pillar shall be from CPRI approved manufacturer. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58281148
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 24.39 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair (E/M) To Bldg No P-02 And Provn Of 01 X 160 Kva 3 Ph Transformer Alongwith Allied Infra For Nfs Under Ge 881 Ews
Basic Detail
Tender No GE/PNH-73/2026-27
Bidding Type Tender
Location
City Poonch
State Jammu and Kashmir
Key Dates
Publish Date 16 Nov 2026
Submission Date 21 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 24.39 Lakhs
Tender Fee 500
EMD 48780
Exemption Available
Document List
BOQ_893285.xls
d17f5dbf-4041-4d69-b480-49646fcb8877.html
TENDER.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_893285.xls

html

d17f5dbf-4041-4d69-b480-49646fcb8877.html

pdf

TENDER.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender