Tender For Repair Re-Canning, Painting And Polishing To Steel Furniture Items At Afs Jammu Under Ge (Af) Jammu
Tender Value
20 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
17 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Re-Canning, Painting And Polishing To Steel Furniture Items At Afs Jammu Under Ge (Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Taking down worned out/unsv components of the following wooden/steel furniture items, Supply and fix new component without any crack/any defects as pe shape and size specified on respective drawings and as directed by Engineer-in-Charge. |
| 2 | Charpoy GI Pipe (FD-220) |
| 3 | 3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 gm |
| 4 | Galvanized iron check nut 32mm dia.Note:-weight of each check nut shall not be less than 125gm |
| 5 | Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed |
| 6 | Short rail converted out of retrieved Long rail, Item No 1(c) above incl cutting, threading as required and as specified and directed by Engineer-in-Charge. |
| 7 | Leg converted out of retrieved Short rail, Item No 1(d) above incl cutting, threading as required and as specified and directed by Engineer-in-Charge. |
| 8 | Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail |
| 9 | Provision of two no 6mm thick x 50 mm width MS flat strip of 900 mm long by drilling four nos screw to long rail. as specified and directed by Engineer-in-Charge. |
| 10 | 12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece) Make Kitply, centurey and equalent including replacement of old plywood or newar. |
| 11 | BED HARD STEEL (FD/E6/MAP/08(R) |
| 12 | 12mm thick ply wood top of size 1950mm x 900mm (Single piece) BWR Grade ISI Mark with MS screws, complete as specified and directed by Engineer-in-Charge.Make Kitply, centurey and equalent |
| 13 | Replacement of 18mm thick prelaminated particle board at head side of the bed complete as specified and directed by Engineer-in-Charge. |
| 14 | Replacement of 18mm thick prelaminated particle board at foot side of the bed complete as specified and directed by Engineer-in-Charge. |
| 15 | PVC shoes at the bottom of leg. |
| 16 | CHAIR COMPUTER (FD/E6/MAP/01) |
| 17 | Replacement of complete seat with new moulded foam cushioned 40mm density as shape and size covered with tapestry cloth as approved along with PVC liping all round, complete as specified and directed by Engineer-in-Charge. |
| 18 | All as per item No 5(a) here-in-before but for back frame |
| 19 | Replacement of Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front complete as specified and directed by Engineer-in-Charge. |
| 20 | Replacement of Pedestal assembly complete |
| 21 | Replacement of Twin wheels coasters (set of five) press fitted at the bottom of leg. |
| 22 | CHAIR WRITING MAP (FD/E6/MAP/12) |
| 23 | Replacement of exising tapestry of seat frame with new tapestry cloth of seat frame approved by Engr-in-charge with PVC liping all round complete all as specified and directed by Engr -in charge Note- Cost of tapestry not less than Rs 250/ RM. |
| 24 | All as per item No 7(a) above but for back frame |
| 25 | Replacement of Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front complete as specified and directed by Engineer-in-Charge. |
| 26 | Replacement of complete seat and back with new moulded foam cushioned 40mm density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, complete as specified and directed by Engineer-in-Charge. |
| 27 | Rubber stopper at the bottom of leg. |
| 28 | Chair Verandah MAP(FD/MAP-II/06) |
| 29 | Taking out old U/S PVC seat and back and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and replace PVC seat and back with 4 mm thick of weight not less that 1.85 Kgs and PVC ribs on seat and back of superior quality as directed by Engineer-in-Charge |
| 30 | PVC/Rubber shoes as per sample approved |
| 31 | CHAIR REVOLVING LONG/LOW BACK |
| 32 | Replacement of complete seat with new moulded foam cushioned 40mm density as shape and size covered with letherate as approved along with PVC liping all round, complete as specified and directed by Engineer-in-Charge. |
| 33 | All as per item No 10(a) here-in-before but for back frame |
| 34 | Replacement of Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front complete as specified and directed by Engineer-in-Charge. |
| 35 | replacement of Pedestal assembly complete with hyradlic shocker as directed by Engr-in-charge |
| 36 | Replacement of Twin wheel coasters press fitted at the bottom of leg. |
| 37 | ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031) /Almirah Small/ Medium steel (FD-350 /1032/243)/ Locker Bedside Steel (FD-257/1029) :- |
| 38 | Shutter (Single Leaf) for Almirah Large Steel made of 1.6 mm thick MS sheet and shall be applied a coat of red oxide primer on both side after preparation surfaces |
| 39 | All as per Item 1(1.01) here-in-before but for Almirah Small/medium steel |
| 40 | All as per Item 1(1.01) here-in-before but for Locker Bedside Steel |
| 41 | Shelves made of 1.25 mm thick MS sheet and shall be applied a coat of red oxide primer on both side after preparation surfaces for almirah Large steel |
| 42 | All as per Item 1(1.04) here-in-before but for Almirah Small/medium steel |
| 43 | All as per Item 1(1.04) here-in-before but for Locker Bedside Steel |
| 44 | Six Levers brass lock for Almirah Large Steel/Almirah small/Med Steel Make : Godrej/Harrison/Link with duplicate keys |
| 45 | Three way Locking Device for Almirah Large Steel of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer |
| 46 | All as per Item 1(1.08) here-in-before but for Almirah Small/medium steel |
| 47 | Chromium plated Steel Handle 125mm for Almirah Large Steel/Almirah small/Med |
| 48 | Chromium plated MS Key plate fixed with screw and nuts for Almirah Large Steel/Almirah small/Med |
| 49 | Chromium plated 100mm Steel Handle 'D' type for Locker Bedside steel |
| 50 | Leg for Almirah Large Steel/Almirah small/Med Steel made of 1.6 mm thick MS sheet with Gas welding incl a coat of red oxide primer |
| 51 | All as per Item 1(1.08) here-in-before but 1.0 mm thick MS sheet for Locker Bedside Steel |
| 52 | 75mm Chromium plated haps & stapple fixed with rivets of locker steel |
| 53 | Hanging Rod for Locker bed side steeel of 1.6mm thick chromium plated MS Rod |
| 54 | CHAIR CB STEEL WITH ARMS/WITHOUT ARMS ( FD-75(M) |
| 55 | Seat frame of Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish incl weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality fixed as shown in drawing |
| 56 | All as per item No 2(2.01) here-in-before but back frame |
| 57 | All as per item No 2(2.01) here-in-before but Seat frame for Chair CB Steel without Arms |
| 58 | All as per item No 2(2.01) here-in-before but back frame |
| 59 | Arms rest for Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish |
| 60 | PVC cap at top of the frame of the chair (02 Nos to each chair) |
| 61 | PVC Shoe at bottom of the frame of the Chairs (04 Nos to each chair) |
| 62 | TABLE OFFICE CLERK/TYPIST STEEL (FD-84(M)/1004/FD-1006) |
| 63 | Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all complete as specified and directed by Engineer-in-Charge. |
| 64 | Drawer made of 22 gauge MS sheet with a coat of red oxide primer |
| 65 | Six levers Lock of Godrej/Harrison with duplicate keys. |
| 66 | Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one. |
| 67 | PVC Shoe at bottom of the leg of the Table |
| 68 | TABLE OFFICE OFFICER STEEL (FD-84(M)/1003) |
| 69 | Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all complete as specified and directed by Engineer-in-Charge. |
| 70 | Drawer made of 22 gauge MS sheet with a coat of red oxide primer |
| 71 | Six levers Lock of Godrej/Harrison with duplicate keys. |
| 72 | Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one. |
| 73 | PVC Shoe at bottom of the leg of the Table |
| 74 | CHAIR executive long back lethaerate (TP) |
| 75 | Replacement of complete seat with new moulded foam cushioned 40mm density as shape and size covered with letherate as approved along with PVC liping all round, complete as specified and directed by Engineer-in-Charge. |
| 76 | All as per item No 9(9.01) here-in-before but for back frame |
| 77 | Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front complete as specified and directed by Engineer-in-Charge. |
| 78 | Pedestal assembly complete with hyradlic shocker as directed by Engr-in-charge |
| 79 | Twin wheel coasters press fitted at the bottom of leg. |
| 80 | Briefing chair with writing pad complete Godrej PCH-1712 |
| 81 | Re-canning of Chair Writing as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge. |
| 82 | Replacement of writing pad with new MDF board writing board and complete as specified and directed by Engineer-in-Charge. |
| 83 | Writng Pad fix with sutable screws |
| 84 | Rubber stopper at the bottom of leg. |
| 85 | Charpoy IP Hardtop (FD/MAP-II/01) |
| 86 | Replacement of old/Unsv plywood with 12mm thick commercial plywood with proper nut and bolt of size as per drawing |
| 87 | PVC hard rubber shoes |
| 88 | Chair School with Hand Board (FD/E-6/MAP/05) |
| 89 | Replacement of old/Unsv one piece PVC seat and back of size as per drawing |
| 90 | Replacement of old/Unsv hand board with 18mm thick prelaminated particle with PVC edging (hinged on right hand side screwed to 25mm hollow steel pipe inserted in 20mm MS rod welded to fame) of size as per drawing. |
| 91 | PVC rubber shoes |
| 92 | Chair Verandah (FD-256, 259, 359) |
| 93 | Taking out old U/S cane/newar and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, and welding UNSV frame, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality complete as specified and directed by Engineer-in-Charge. |
| 94 | PVC/Rubber shoes as per sample approved |
| 95 | Table Computer FD/E6/MAP/03 |
| 96 | Provision and replacement of top 18mm Thick Pre laminated Partical board as per drawings. |
| 97 | Provision and replacement of18mm Thick Pre laminated Partical board drawer 75mm deep on telescopic channel as per drawings. |
| 98 | Provision and replacement of18mm Thick Pre laminated Partical board key board tray on telescopic channel as per drawings. |
| 99 | Provision and replacement of 25 mm thick sqare pipe side support of Table computer as per drawings. |
| 100 | Provision and replacement of legs with nylon buffer of Table computer as per drawings. |
| 101 | Painting of Steel Furniture Item : All steel surfaces of the following furniture items wheather exposed to view or not when placed in position shall be painted with high glossy paint to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required:- |
| 102 | BED HARD STEEL (FD/E6/MAP/08(R) |
| 103 | CHAIR WRITING MAP (FD/E6/MAP/12) |
| 104 | Chair Verandah MAP(FD/MAP-II/06) |
| 105 | ALMIRAH LARGE STEEL WITH SHELVES |
| 106 | Locker Bed Side steel |
| 107 | Almirah small/medium steel |
| 108 | CHAIR CB STEEL WITH ARMS/WITHOUT ARMS ( FD-75(M) |
| 109 | TABLE OFFICE CLERK/TYPIST STEEL (FD-84(M)/1004/FD-1006) |
| 110 | TABLE OFFICE OFFICER STEEL (FD-84(M)/1003) |
| 111 | Briefing chair with writing pad complete Godrej PCH-1712 |
| 112 | Charpoy IP Hardtop (FD/MAP-II/01) |
| 113 | Chair School with Hand Board (FD/E-6/MAP/05) |
| 114 | Chair Verandah (FD-256, 259, 359) |
| 115 | Table Computer FD/E6/MAP/03 |
| 116 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender