Tender For Provn Of Roof Sheet, False Ceiling And Other Connected Work At Cook House Of Bldg No 219 At Afmc Under Ge (Central) Pune
Tender Value
9.67 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
19 days left
EMD
19340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Roof Sheet, False Ceiling And Other Connected Work At Cook House Of Bldg No 219 At Afmc Under Ge (Central) Pune
BOQ
| Sl. No. | Item Description |
| 1 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm to 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates, Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 4 | M&L PCC (1:3:6) type-C-1 (using 20 mm graded stone aggregate) as in roof kerbs, rounded or chamfered on edges, including necessary form work complete all complete all as specified and directed. |
| 5 | S&F wind ties for roof including securing bolts, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 6 | M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6), grade C-1 and setting in CM 1:6 complete all as specified and directed. |
| 7 | Taking down cement plaster on stone/Brick walls including raking out joints, hacking for key, scrubbing down with water all complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in 1:6 CM finished the surface even and Smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for two coats of oil bound distemper over a coat alkali resistant primer to newly plastered surfaces of walls over one or two coats of average thickness of 1mm wall care putty including preparation of surfaces complete all as specified and directed. |
| 10 | S&F false ceiling using Non Asbestos (Fiber cement) decorative tiles of Size 595mm x 595mm x 4mm thick including GI snap grid of size (600mmx60mm) using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 24 x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mmx32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall complete all as specified and directed. The above grid is suspended at every 1200 mm center to center in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans/light. |
| 11 | M&L for point wiring with necessary fixing arrangements with PVC-FRLS insulated and unsheathed Copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic PVC conduit medium grade ISI marked not less than 20 mm dia/PVC Casing & Caping not less then (20 x 12) mm including all accessories/fittings such as junction boxes, bends, tee, elbow etc alongwith required size modular boxes including modular frame/cover plate suitable for mounting switches/sockets etc including PVC-FRLS insulated and unsheathed Copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar and for matching/finishing of new surfaces either by means of plaster of peris/Putti or distemper/colour wash complete all as specified and directed.(a) One light/Exhaust Fan/ceiling fan & One Bell/buzzer point controlled by one switch. |
| 12 | (b) One switch socket outlet point 3 pin 5 Amps on Independent board. |
| 13 | Material and labour for Point wiring complete with 2 run of 2.5 sqmm single core PVC FRLS insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade with multistranded Copper conductor drawn through and including suitable size of PVC white non metalic conduit with all accessories like tee, straight joint, L Bend etc., concealed on wall surface on ceiling/roofs etc., and including provision of PVC insulated heavy duty ISI Marked unsheathed Copper conductor 1.5 sqmm for Earth continuity conductor and connected to common Earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches/socket outlets 15 Amps complete all as specified and directed. |
| 14 | Material and labour for sub main wiring with two single core PVC FRLS insulated unsheathed Copper conductor cable 2.5 sqmm drawing in and including PVC Casing/casing of suitable size on wall/surface on ceiling with one additional PVC wire of Copper conductor of 2.5 sqmm for Earth continuity conductor complete all as specified and directed. |
| 15 | Material and labour for sub main wiring with two single core PVC FRLS insulated unsheathed Copper conductor cable 6 sqmm drawing in and PVC casing/caping of suitable size on wall/surface on ceiling with one additional PVC wire of Copper conductor of 6 sqmm for Earth continuity conductor complete all as specified and directed. |
| 16 | Material and labour for sub main wiring with two single core PVC insulated unsheathed Copper conductor cable 4 sqmm drawing in and including suitable size PVC-FRLS Casing and caping wall/surface on ceiling with one additional PVC wire of Copper conductor of 4 sqmm for Earth continuity conductor complete all as specified and directed. |
| 17 | Supply and fix LED 18/20 Watt light fitting Batten integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible Copper conductor cable with suitable size complete with all accessories complete all as specified and directed. |
| 18 | S&F LED light fittings 2'x2' of capacity 35/36 watts White/warm white LED surface/reccess environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness glare free soft illumination, white powder coated housing with LEDs, seamless front frame with flat white acrylic cover, 230 volts with all accessories internally pre wired and necessary mounting arrangements complete all as specified and directed. |
| 19 | Material and labour to perform core drilling on brick/masonry walls with a thickness of up to 18 inches, drilling holes with a diameter ranging from 2 to 4 inches, using suitable machinery and equipment. The contractor shall provide all necessary materials, labour, and eqpt reqd to perform the work complete all as specified and directed. The contractor shall ensure that the drilling is executed without damaging the surrounding structure, any scaffolding, ladders, or additional support structures necessary for execution wor work shall be arranged by the contractor at his own cost. |
| 20 | Supply and fix ceiling fan down rod GI pipe of 15 mm bore, duly arrangement of hole and cutting of pipe etc of size 4/6 Feet long complete all as spd and directed. |
| 21 | Supply and fix building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete along with suitable size/bore GI pipe bracket duly cut to size and bent to shape, duly painted incl necessary clamps as required to fix on concrete/steel poles complete all as specified and as directed. |
| 22 | S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 23 | S&F modular switch 6A SP one- way 230V white ivory finish complete all as specified and directed. |
| 24 | S&F modular switch 16A SP one- way 230V white ivory finish complete all as specified and directed. |
| 25 | S&F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 26 | S&F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 27 | S&F modular type stepped electronic fan regulator complete all as specified and directed. |
| 28 | Supply & fix SPN distribution box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type Copper bus bar, Din rail, Earth bar of 8 way, complete all as specified and directed. |
| 29 | Supply and fix single pole and neutral enclosure with a two pin and Earth plug and socket complete with one single pole MCB 20 Amp, single pole complete all as specified and directed. |
| 30 | Supply & fix MCB SPN, 40 to 63 Amps 240 volts, AC, 10 KA breaking capacity 'C' Series, \\"ISI marked complete all as specified and directed. |
| 31 | Supply & fix MCB SP, 06 to 32 Amps 240 volts, AC, 10 KA breaking capacity 'C' Series, \\"ISI marked complete all as specified and directed. |
| 32 | Supply & fix TPN DB 4 Way distribution box, double door in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type Copper bus bar, Din rail, Earth bar complete all as specified and directed. |
| 33 | Supply & fix MCB TPN 63 Amps 440 volts, AC, 10 KA breaking capacity 'C' Series, \\"ISI marked complete all as specified and directed. |
| 34 | M&L for earthing with galvanized steel Earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (Earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI Earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal/coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plate No. 3 of SSR Part-I and testing of Earth resistance as required complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender