Tender For Special Repair To Building No P-15 At Thimmaya Enclave At Sunjuwan Under Ge Jammu.
Tender Value
47.50 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
19 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building No P-15 At Thimmaya Enclave At Sunjuwan Under Ge Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | B/R Portion: -Taking down chowkhats or frames with shutter without taking off shutter from the frame not exceeding 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed. |
| 2 | Taking down chowkhats or frames with shutter without taking off shutter from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed. |
| 3 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing unserviceable material exceeding 100 mtr complete all as specified and as directed. |
| 5 | Demolition of brick masonry built in cement mortar including all quions, arches, pillars etc. complete all as specified and as directed. |
| 6 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints hacking for key scrubbing with water etc complete all as specified and as directed. |
| 7 | Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 8 | Taking down eaves gutters and rainwater pipes/ waste pipe (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and as directed. |
| 9 | Taking down GI tubing of 15 mm dia and connection and including cleaning for refixing or removal complete all as specified and as directed. |
| 10 | Taking down GI tubing of 20 mm dia and connection and including cleaning for refixing or removal complete all as specified and as directed. |
| 11 | Dismantling/ disconnecting/ demolition of water storage tank of any type or description PVC exceeding 500 and not exceeding 1000 litres capacity complete all as specified and as directed. |
| 12 | Brick work of old size sub class ‘B’ bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 13 | Description all as per Ser item No 12.00 here-in-before but except bricks complete all as specified and as directed. |
| 14 | Providing and fixing of aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) ventilator shutters including frame, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws. anodised aluminium fittings such as peg stays 150 mm long (01 No) hinges type B-21 100 mm long (02 Nos) suitable handle (01 No) complete all as specified and as directed. |
| 15 | Pressed steel frames for door (factory made) out of 1.25 mm thick black mild steel sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete size of frame 105 x 60mm including bottom of each chowkhat to be welded with 2 Nos 25 x 25 x 3 mm thick flat iron projecting 10 cm on either side including one shop coat of red oxide primer complete all as specified and as directed.Note: - PCC (1:3:6) type C-0 as in back fill will be paid separately. |
| 16 | Pressed steel frames for door (factory made) out of 1.25 mm thick black mild steel sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete size of frame 125 x 60mm including bottom of each chowkhat to be welded with 2 Nos 25 x 25 x 3 mm thick flat iron projecting 10 cm on either side including one shop coat of red oxide primer complete all as specified and as directed.Note: - PCC (1:3:6) type C-0 as in back fill will be paid separately. |
| 17 | Cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) as in backfill of pressed steel door frames complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 65 x 100mm comprising of virgin PVC polymer of 'K' value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (Maximum toxicity index 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900N/mm² and resistance to spread of flame of class 'A' category with property of being termite/ borer proof water/ moisture proof and fire retardant and fixed in position with mild steel hold fasts/ lugs/ stainless steel dash fasteners of required dia and length complete all as specified and as per the directions of Engineer-in-Charge. |
| 19 | Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed. |
| 20 | Powder coated aluminium three track sliding window, consisting two shutter of 5.5mm thick tint glass shutter and one shutter of stainless steel wire cloth of 0.56 mm dia and 1.18 mm aperture including, wire gauge shall be fixed with the help of 40 mm powder coated aluminium flat other section, provision for opening of window AC, including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc complete all as specified and as directed. section of member are as under: -(i) Frame Bottom track -92mm x 31.75mm x 1.5mm thick of Jindal section cat part No 20832 or equivalent in makes as specified in Group - I of Appx 'F'.(ii) Frame Top and side section -92mm x 31.75mm x 1.5mm thick of Jindal section cat part No 20831 or equivalent in makes as specified in Group - I of Appx 'F'.(iii) Shutter – side (vertical) section -40mm x 18mm x 1.3mm thick of Jindal section cat part No 20687 or equivalent in makes as specified in Group - I of Appx 'F'.(iv) Shutter Lock rail (Vertical) section - 40mm x 18mm x 1.29mm thick of Jindal section cat part No 20845 or equivalent in makes as specified in Group - I of Appx 'F'.(v) Shutter Top and Bottom section - 40mm x 18mm x 1.29mm thick of Jindal section cat part No 20844 or equivalent in makes as specified in Group - I of Appx 'F'. |
| 21 | Powder coated aluminium door, shutter of 5.5mm thick plain glass shutter including all necessary fiber beading, handle, floor mounted spring and all necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc complete all as specified and as directed. section of member are as under: -(i) Frame - 63.50mm x 38.10mm x 1.5mm thick of Jindal section cat part No 20125 or equivalent in makes as specified in Group - I of Appx 'F'.(ii) Shutter top, middle and bottom rail section - 100mm x 44.45mm x 2.0mm thick of Jindal section cat part No 19653 or equivalent in makes as specified in Group - I of Appx 'F'.(iii) Shutter – side (vertical) hinge side section - 83.50mm x 44.45mm x 1.87mm thick of Jindal section cat part No 19582 or equivalent in makes as specified in Group - I of Appx 'F'.(iv) Shutter – side (vertical) lock side section -85.0mm x 44.45mm x 1.80mm thick of Jindal section cat part No 19572 or equivalent in makes as specified in Group - I of Appx 'F'. |
| 22 | Supply and stick solar control film 50 microns thick on glass panes as per manufacturer’s instructions complete all as specified and as directed. |
| 23 | Stainless steel door factory made box type hollow section 0.80 mm thick size for vertical and top rail 100 mm x 35 mm size of middle rail 150 mm x 35mm and bottom rail of size 200 x 35mm single rebated comprises wire gauged skelton shutter including 02 nos 150 mm handle, 200 mm tower bolts and 01 no 300 mm long sliding door bolts complete all as specified and as directed.Note: - Wire gauge shall be measured and paid separately. |
| 24 | 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both faces are covered with decorative face veener/ laminate with lipping/ frame to match complete all as specified and as directed by Engineer-in-Charge. |
| 25 | 35 mm thick second class hard wood half glazed and Skelton shutters open rebated and prepared to receive glass/ wire gauge etc. without sash bar but with lock rail edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/ wire mesh etc sizes of member as per clause 8.20 (a) of SSR part - I for door shutter complete all as specified and as directed. |
| 26 | Pressed steel cup board frame of mild steel sheet 1.25 mm thick size of frame 60 x 40mm with rebate of 20 mm wide and 12 mm deep including PCC (1:2:4) as in filling to back of chowkhats including butt hinges 100 mm long piano hinges measured separately complete all as specified and as directed. |
| 27 | CBs shutter and shelves made of solid UPVC foam profile with homogenous fine cellular structure having smooth outlet integral skin having 45mm width and 18mm thickness as vertical and horizontal stiles, joints are made and shall be fixed to walls using required size sheet metal screws and solvent adhesive vertical and horizontal profile made of UPVC profile frame of size 35mm x 17mm. The panel shall be filled with accucell plank profile of size 250mm width and 6mm thick complete all as specified by manufacturers instruction and all as directed. |
| 28 | Kitchen cabinet and shutter with frame and shelves made of solid uPVC foam profile with homogenous fine cellular structure having smooth outlet integral skin having 45mm width and 18mm thickness as vertical and horizontal stiles, joints are made and shall be fixed to walls using required size sheet metal screw and solvent adhesive vertical and horizontal profile made of UPVC profile frame of size 35mm x 17mm. The panel shall be filled with accucell polank profile of size 250mm width and 6mm thick complete all as specified by manufacturer instruction and all as directed. |
| 29 | Continuous piano hinges mild steel bright finish or electrogalvanised width of flap 30mm when open complete all as specified and as directed. |
| 30 | Magnet ball catches with 8mm dia steel ball and brass body and striking plate for cup board/ cabinet shutters complete all as specified and as directed. |
| 31 | PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.Note: - Formwork required for these items included in the unit rate of this item. |
| 32 | 3.0 mm thick sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and beads nails etc. to wooden surfaces as in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed. |
| 33 | 3.0 mm thick figured glass, pin headed/ frosted head type and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed. |
| 34 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized with staples including one coat of red oxide primer complete all as specified and as directed. |
| 35 | Stainless steel butt hinges 100mm long medium weight cold rolled complete all as specified and as directed. |
| 36 | 100 mm long hasp and staple, aluminium anodised with bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 37 | Stainless steel tower bolt of size 150 mm complete all as specified and as directed. |
| 38 | Stainless steel handle of size 150 mm complete all as specified and as directed. |
| 39 | Stainless steel handle of size 100 mm complete all as specified and as directed. |
| 40 | Mild steel helical/ ordinary rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding all as specified and as directed. (ISI marked). |
| 41 | Stainless steel sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts complete all as specified and as directed. |
| 42 | Floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 43 | Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and as directed. |
| 44 | 25 mm thick PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in floor finished rough complete all as specified and as directed. |
| 45 | Glazed ceramic coloured tiles 600 x 300 x 7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10 mm thick screed in cement mortar (1:4) complete all as specified and as directed. |
| 46 | Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangulament) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors over 15 mm thick screed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white/ coloured cement with pigment to match complete all as specified and as directed. |
| 47 | Premium quality light shade vitrified tiles in floor 10mm thick area of each tile not exceeding 0.36 Sqm set and jointed in neat cement slurry and pointed in white or coloured to match over and including 15mm thick screed bed or beddding layer of mortar with (1:6) cement mortar for laying floor finishes complete all as specified and as directed. |
| 48 | Premium quality light shade vitrified tiles 10mm thick as in vertical surface such as skirting/ dados etc as approved size over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed. |
| 49 | Ultrastrong exterior full body vitrified tiles matt finished 400mm x 400mm x 16mm thick set, jointed in neat cement slurry and pigment with grey cement and pigments to match the shade of tile pattern as approved in floors including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 50 | Material and labour for making/ providing of suitable lifting arrangement/ suspended platform/ scoffolding upto working height 12 metre from FFL for two or three person can be worked at a time made from steel or bamboo for replacement/ repair of any damaged structure on building and removing for same after completion of repairs work complete all as specified and as directed. |
| 51 | Demolition of stone slabs any description or thickness in floors laid, bedded and pinned in cement mortar complete all as specified and as directed. |
| 52 | Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in cement mortar (1:4) complete all as specified and as directed. |
| 53 | Machine cut kota stone slab flooring 20-25 mm thick in single length upto 2.0 metre (Equal length for tread length) as in treads laid over cement screed base 10mm thick in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and mirror polishing complete all as specified and as directed. |
| 54 | Machine cut kota stone slab flooring 20-25 mm thick as in flooring laid over cement screed base 10mm thick in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and mirror polishing complete all as specified and as directed. |
| 55 | Machine cut kota stone slab 20-25 mm thick in single length upto 2.0 metre as in riser of steps, skirting, dado and pillar laid over 10mm thick backing coat in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing complete all as specified and as directed. |
| 56 | Providing edge moulding to Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed. |
| 57 | Rendering 15 mm thick cement plaster (1:4) on fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and as directed. |
| 58 | Rendering 10 mm thick cement plaster (1:6) on other than fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and as directed. |
| 59 | Rendering 5 mm thick cement plaster (1:3) on fair faces of concrete surfaces as in ceiling, chajja, shelves etc. finished even and smooth without using extra cement complete all as specified and as directed. |
| 60 | PVC (SWR) pipes 110 mm bore single socketed in any length with rubber joint fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and as directed. |
| 61 | PVC (SWR) pipes 75 mm bore single socketed in any length with rubber joint fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and as directed. |
| 62 | PVC (SWR) bends of 110 mm bore complete all as specified and as directed. |
| 63 | PVC (SWR) bends of 75 mm bore complete all as specified and as directed. |
| 64 | PVC (SWR) branch piece, single 'Y' equal or unequal provided with access door of 110 mm dia complete all as specified and as directed. |
| 65 | PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and as directed. |
| 66 | PVC (SWR) junction double (double T) equal or unequal provided with access door of 110 mm dia complete all as specified and as directed. |
| 67 | PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and as directed. |
| 68 | PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and as directed. |
| 69 | PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed. |
| 70 | Supply and fixing in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts and flushing cistern) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed. |
| 71 | Supply and fixing in repair WC Orissa pattern white with integral foot rest 580 x 440 mm including PVC 'P' trap and PCC bedding in (1:2:4) and making good disturbed floor connecting to trap and flush pipe (Rate of including in taking out and removal of old WC seat unhygienic condition) complete all as specified and as directed. |
| 72 | Supply and fixing in repair PVC low level flushing cistern 10 litre capacity white with inlet ball valve, float valve and handle including brackets, PVC flush pipe complete all as specified and as directed. |
| 73 | PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipes of 15 mm bore complete all as specified and as directed. |
| 74 | 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 75 | Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 76 | 15 mm bore chromium plated brass centre hole basin mixture quarter turn with U shape round casted spout with 450mm long braided hoses fixed to GI pipe complete all as specified and as directed. |
| 77 | Supply and fixing in repair tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges aluminium anodised, fixed with rawl plugs complete all as specified and as directed. |
| 78 | Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 580 x 450 mm including 32 mm dia PVC waste pipe, chromium plated brass waste coupling 32 mm dia, pair of mild steel brackets or mild steel fastener/ bolts for fixing arrangements and 450 mm long PVC connection with PVC nut and washer complete all as specified and as directed. |
| 79 | Supply and fixing in repair Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and as directed. |
| 80 | Long body bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and as directed. |
| 81 | Supply and fixing in repair stop valve/ angle valve cast copper chromium plated screwed down high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed. |
| 82 | Supply and fixing in repair 15mm bore chromium plated Hand shower (health faucet) 1M flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge. |
| 83 | Stainless steel gratings of outer frame dia 150 mm openable type including all necessary fittings such as hinges including embedding in tiles with white cement complete all as specified and as directed. |
| 84 | Stainless steel gratings of 125 mm with waste holes complete all as specified and as directed. |
| 85 | Brass chromium plated hot and cold water wall mixer 2 in 1 system wall unit with over head shower arrangement with hot and cold valves cast copper alloy heavy duty screwed down for iron pipe and fixed complete all as specified and as directed. |
| 86 | Supply and fixing in repair brass chromium plated shower rose 125 mm size swivel type with 450mm long shower arms 15 mm bore complete all as specified and as directed. |
| 87 | Supply and fixing in repair kitchen sink made out of 1mm thick stainless steel sheet with plug washer, waste coupling, waste pipe including bedding in cement mortar, connection to union and drain pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 88 | Supply and fixing in repair kitchen sink with drainage board made out of 1mm thick stainless steel sheet with plug washer, waste coupling, waste pipe including bedding in cement mortar, connection to union and drain pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 89 | 15mm dia towel rack 60mm chromium plated bars complete all as specified and as directed including taking down old one.Makes: - Jaquar Cat Part No. AHS 1581H or equivalent in makes of Ess Ess or as mentioned in Group - I of Appx 'F'. |
| 90 | 15mm dia toilet paper holder chromium plated bars complete all as specified and as directed including taking down old one.Makes: - Jaquar Cat Part No. AHS 1551BP or equivalent in makes of Ess Ess or as mentioned in Group - I of Appx 'F'. |
| 91 | 15mm dia soap dish chromium plated bars complete all as specified and as directed including taking down old one.Makes: - Jaquar Cat Part No. AKP-35731P or equivalent in make of Ess Ess or as mentioned in Group - I of Appx 'F'. |
| 92 | Supply and fixing in repairs Cabinet mirror plastic body for toilet of size 450 x 600mm with 4mm thick looking mirror complete all as specified and as directed. |
| 93 | Stainless steel grade 430, glossy finish, wall hanging plate rack inclusive of spoon hanger, made out of 1mm thick sheet of size 750 x 600 x 250 mm having partition as per sample kept in AGE B/R office and fixed with steel fasteners or steel screws complete all as specified and as directed. |
| 94 | Glass corner shelf 225 mm including taking down old one complete all as specified and as directed. |
| 95 | Supply and fixing in repair 15mm bore chromium plated two way bib cock with flange complete all as specified and as directed by Engineer-in-Charge.Make: - Jaquar Cat Part No: CON:041KN or equivalent in makes as mentioned in Group - I of Appx 'F'. |
| 96 | Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with end cap, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends complete all as specified and as directed.Note: - The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/ windows. |
| 97 | 20mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed. |
| 98 | 25mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed. |
| 99 | CPVC brass elbow 20 mm outer dia complete all as specified and as directed. |
| 100 | 15 mm dia galvanised pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 101 | 20 mm dia galvanised pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 102 | Cutting chases for concealed water tubing or concealed conduit and making good in cement mortar (1:3) of grith exceeding 10 cm and not exceeding 20 cm in brick wall complete all as specified and as directed. |
| 103 | 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid to an outward slope of not less than (1:12), cast in panels not exceeding 2.0 Sqm areas with 6 mm wide joints. The joint shall be filled with mastic filling and 10 mm wide joints between the walls and plinth protection shall be filled with mastic filling and finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 104 | Rotational moulded polyethylene water storage tank with plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litre including making connections complete all as specified and as directed. |
| 105 | Rotational moulded polyethylene water storage tank with plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litre including making connections complete all as specified and as directed. |
| 106 | 20 mm dia gun metal, globe or gate valve with iron wheel head, scewed both ends for iron pipe and fixed complete all as specified and as directed. |
| 107 | 25 mm dia gun metal, globe or gate valve with iron wheel head, scewed both ends for iron pipe and fixed complete all as specified and as directed. |
| 108 | Supply and fixing in repairs 25 mm dia Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram), screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 109 | Supply and fixing in repairs 20 mm dia Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram), screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 110 | Applying one coat of synthetic enamel paint tint over old painted steel surfaces over 10 cm in width or girth including preparation of old surfaces of steel complete all as specified and as directed. |
| 111 | Preparation of old wood or wood based surface and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 112 | Preparing of new plastered surface of wall, chajja, roof projection and roof fascia surface and applying two or more coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 1mm thick exterior wall care putty complete all as specified and as directed.Notes: - (a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the material i.e. paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by GE.(b) The contractor shall upload along with the documents under cover-I, 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 113 | Preparation of newly plastered surface of wall/ ceiling and applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour over and including 1mm thick wall care putty and water thinnable priming coat with cement primer having VOC content less than 50 gram/litre complete all as specified and as directed. |
| 114 | Complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/ Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ ceiling by filling cracks/ crack fill paste and make good smoothen surface by sand paper and applying two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 1mm thick exterior wall care putty complete all as specified and as directed. (Including all necessary scaffolding lifting arrangement upto 10 mtr height). Notes: - (a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the material i.e. paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by GE.(b) The contractor shall upload along with the documents under cover-I, 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 115 | Complete removal of existing treatment from internal surfaces of wall/ ceiling by mechanical sander sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying uniform thickness (average 1mm thick) wall care putty on internal surfaces of wall including preparing the surface even and smooth by sander machine etc and providing two coats of distempering with 1st quality distemper of approved manufacturer, of required shade and colour complete as per manufacturer's specification, applied over a coat of primer and all coat applying with roller brush complete all as specified and as directed by Engineer-in-Charge. |
| 116 | Preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 117 | Providing water proofing treatment to Sunken floors all as given below: -(a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty or epoxy mortar.(c) Cleaning the concrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of Acrylic based polymer modified cementitious flexible composite coating and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours.(d) Appying a coat of Acrylic based polymer modified cementitious flexible composite coating brush topping 1.5mm thick consisting of one part of Acrylic based polymer modified cementitious flexible composite coating, two parts of cement and two parts of silica sand by weight and cured to 2 days.(e) Applying 15mm thick plaster in cement mortar (1:4) mixed with WPC @100ml per 50 Kg cement on treated surface.(f) PCC (1:5:10) type E-2 in sunken area. |
| 118 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 119 | Providing 25 mm thick (average thickness) PCC (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregates) as in floor by maintaining required gradient/ undulation, finished even and fair as in roof padding including preparation of surface and mixed with water proofing compound and finished even and fair without using extra cement complete all as specified and as directed.Note: - WPC will be measured and paid separately as supply only. |
| 120 | Complete removal of existing roof treatment or roof tile or plaster and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified and as directed. Material and labour for highly elastic, UV-resistant membrane one-component, water-based, liquid and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates, with ability to bridge cracks, cold applied, water-proofing membrane that is highly elastic and UV resistant with 10 years Warranty. ASTM D 6083-97a Waterproofing and heat reflecting system having following key performance properties: -(1). UV resistant, prevent yellowing and weathering.(2). Highly elastic upto 350% and crack bridging.(3). Excellent adhesion on porous and non-porous substrates.(4). Tensile Strength >10 N/mm² with GeoTextile fleece.(5). Solar Reflective Index (SRI) more than 109-111 ASTM E1980-11, System: SRI tile 300mm x 300mm x 10 mm thick set, jointed and pointed in roof floor/ terraces over and including 15mm thick screed bed in cement mortar (1:4) with chemical based adhesive as per manufacturer instruction complete all as specified and as directed.First coat: Providing and applying OEM prescribed compatible primer over the prepared surface for adhesion and bridging cracks. Coverage: 0.2kg/m² (with 50% dilution of water, laying of Reinforcement Geotextile 40 gsm sheet on roof/ terraces. Second coat : highly elastic, UV-resistant membrane one-component, water-based, liquid and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates, with ability to bridge cracks.Consumption: 0.5 kg/m². Third coat: highly elastic, UV-resistant membrane one-component, water-based, liquid and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates, with ability to bridge cracks. Consumption : 0.8 kg/m² System buildup- 1.5 kg/Sqm with geotextile of 40 gsm. For accessible roof, tiles with screed/ adhesive may be fixed there after. |
| 121 | Rolled sections conforming to Fe-410W (Grade E-250) quality 'A' as in main and cross beams, hip and jack rafters; purlins, trusses, post, stagging, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Beam, tee, angle, channel or flat sections or mild steel tube pipe) complete all as specified and as directed. |
| 122 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waste slab with suitable arrangement complete all as specified and as directed. |
| 123 | Mild steel framed work as in grills, gratings etc. with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar works conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed by Engineer-in-Charge. |
| 124 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 125 | Painting with synthetic enamel paint two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and as directed. |
| 126 | 75 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub-base to floor finishes complete all as specified and as directed. |
| 127 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 128 | E/M Portion: -Taking down old unserviceable copper/ aluminium point wiring concealed/ batten (light, fan, socket or power) complete including fixtures and fittings such as switches, sockets, ceiling roses, bell push, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden/ iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed by Engineer-in-Charge. |
| 129 | Sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. |
| 130 | Sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 4 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. |
| 131 | Material and labour in replacement for wiring for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1 run 1.5 Sqmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall for inverter connection of light and fan point complete all as specified and as directed. |
| 132 | Complete Point wiring with 1.5 Sqmm two core multistranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall, plastering after concealing conduit, including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc and including making good the disturbed surface as per existing complete all as specified and as directed by Engineer-in-Charge. |
| 133 | Description all as per Ser item No 132.00 here-in-before but for multi 5 pin 5 Amp socket outlet on same board complete all as specified and as directed by Engineer-in-Charge. |
| 134 | Description all as per Ser item No 132.00 here-in-before but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and as directed by Engineer-in-Charge. |
| 135 | Description all as per Ser item No 132.00 here-in-before but for one light point controlled by two 2 way switches, with cable 1.5 Sqmm complete all as specified and as directed by Engineer-in-Charge. |
| 136 | Description all as per Ser item No 132.00 here-in-before but for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 Sqmm size complete all as specified and as directed by Engineer-in-Charge. |
| 137 | Description all as per Ser item No 132.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green colour complete all as specified and as directed by Engineer-in-Charge. |
| 138 | Modular switch 1 way 6A, 1 module, 240 Volts ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 139 | Modular socket 6A - 5 pin combined, 2 module, 240 Volts ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 140 | Modular switch 2 way 6A, 1 module, 240 Volts ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 141 | Modular bell push 6A, 1 module, 240 volts ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 142 | Modular switch 1 way 16A, 1 module, 240 Volts ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 143 | Modular socket 6A/ 16A - 6 pin combined 2 module, 240 Volts ISI marked complete all as specified and as directed. |
| 144 | Ceiling rose, 3 Phase/ PVC/ Polycarbonate isolated body complete all as specified and as directed by Engineer-in-Charge. |
| 145 | Calling bell Ding Dong AC 230 Volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 146 | Modular fan regulator stepped electronic type suitable for AC, 120 V, 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 147 | Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. |
| 148 | Self ballast LED retrofit lamp with PVC body and PC Diffuser 9 Watt 230 Volt 6500 K complete all as specified and as directed by Engineer-in-Charge. |
| 149 | LED lights fitting 1 x 20W, 220V, PVC batten type with driver, holder and power factor >0.90, 100 Lumen/ Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge. |
| 150 | LED light fitting 1 x 9W/ 1 x 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 151 | LED light fitting mirror type with high output diffuser 2 feet, 12 watt, 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 152 | Decorative wall mounting fancy light fitting complete with LED bulb 9 watt, lamp holder diffuser mounting base including complete wiring and fixing the same with all accessories complete all as specified and as directed by Engineer-in-Charge. |
| 153 | Supply and fixing in replacement of LED Post Top Lantern 25 watt with die cast aluminium spigot, spun aluminium powder coated top cover, Aluminium PDC heat sink, opal PC diffuser and clear acrylic IP-65, Optics : PC lenses with toughened glass, electronic driver with input voltage range of 170 to 280 V complete all as specified and as directed by Engineer-in-Charge.Make: - Halonix Cat Part No - HLPT-04-25-CW/ equivalent in Philips/ Bajaj/ as mentioned in makes as specified in Group - I of Appx 'F'. |
| 154 | Supply and fixing in replacement Ceiling fans, BLDC motor tech complete with remote and blades, down rods, hanging hooks and accessories, 230 V, 1200mm sweep, suitable for working on fan regulators, minimum air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete with fixing arrangement complete all as specified and as directed.Note: - Contractor will deposit the old unserviceable ceiling fan to MES store for further course of action. |
| 155 | Exhaust fan, steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers making holes for 300mm exhaust fan of suitable shape and size into or through brick walls including plastering for making good to the original surfaces of any description disturbed including painting/ distemper matching with the existing colour including taking down old one and deposited to MES store complete all as specified and as directed.Note: - The rates includes for making good to the original surfaces of any description disturbed including painting/ distemper matching with the existing colour. |
| 156 | Exhaust fan, PVC body AC single phase, 230V of size 200-240mm sweep with blades and frame and louvers making holes of suitable shape and size into or through brick walls including plastering for making good to the original surfaces of any description disturbed including painting/ distemper matching with the existing colour including taking down old one and deposited to MES store complete all as specified and as directed.Note: - The rates includes for making good to the original surfaces of any description disturbed including painting/ distemper matching with the existing colour. |
| 157 | Electric water heater, storage type steel body glass line coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.Note: - Rates are deemed to be included the cost for fixing of 4 Nos rawl plug of suitable size (4\\" to 6\\") nuts and bolts, grouting work in RCC/ brick wall including taking down old one and deposited to MES store. |
| 158 | Supply, installation, testing and fixing in replacement of Distribution board V (TP&N) 4 way double door mounted type suitable for MCCB 125 Amp, TP, 415 Volt complete with all necessary accessories with copper bus bars, neutral links, earthing bar, terminals with proper wiring etc. The incomer and outgoing MCB's and should be IP-43 protected including taking down old unserviceable distribution board/ MCB any type complete all as specified and as directed.Note: - (i) MCB's shall be measured and paid separately. |
| 159 | MCCB, TP, 125 Amp, 415 Volt, 50 Hz, 25 KA breaking capacity thermal magnetic trip complete with terminals, shrouds, with connection, testing and commissioning complete all as specified and as directed. |
| 160 | Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 Volts double door complete all as specified and as directed by Engineer-in-Charge.Note: - Distribution board and MCB's should be of same make. |
| 161 | Supply and fixing in replacement SPN 40 to 63 Amps rating 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed. |
| 162 | Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed. |
| 163 | Supply and fixing in replacement miniature circuit breaker (MCB) SP 63 Amp suitable for 240 V, 50 Hz, three phase 'C' curve having breaking capacity 10 KA fitted in distribution board complete with proper connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge. |
| 164 | Taking down existing serviceable/ unserviceable electric meter alongwith existing angle iron steel box from the wall and refixing electric meter in position after repair replacement of MCB TPN box including replacement of PVC flexible conduit for cable protection complete with making the existing wall neat and clean including patch work, plaster, brick work and white wash as per site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 165 | Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtrs deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nuts, bolts, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 precast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5m length for drawing earth lead wire protection, common salt, charcoal etc complete all as shown in electrical plate No 3 of SSR Part - I and testing on completion complete all as specified and as directed. |
| 166 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and making good bottom surface for laying/ removing of cable in soft/ loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 167 | Supply and laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip of wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 V grade cross sectional area 25 Sqmm 4 core in and including taking out old one complete all as specified and as directed. |
| 168 | Sand filling in cushioning bed of cable and consolidation complete all as specified and as directed by Engineer-in-Charge. |
| 169 | Supply and laying common burnt clay building sub class 'B' bricks, laid over sand cushioning laid at right angle along with cable complete all as specified and as directed. |
| 170 | Returning filling in excavated soil in trenches, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed by Engineer-in-Charge. |
| 171 | Removal of excavated any type of soil to a distance not exceeding 50m complete all as specified and as directed by Engineer-in-Charge. |
| 172 | Supply and laying GI tubing light grade including all accessories for encasing cables for mechanical protection, laid under plinth/ floors/ path culverts with complete accessories such as bends/ sockets/ reducers/ saddles including necessary threading/ drilling works of sizes 40mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 173 | Cutting to existing pipe 15/20mm dia in position and insertion of 'T', additional alteration in position complete with GI fittings as required at site for connecting new GI pipe complete all as specified and as directed by Engineer-in-Charge. |
| 174 | Galvanised iron pipe medium grade of size 15mm complete with all fittings such as bend, tee, reducer, elbow and union of required size complete all as specified and as directed.Note: - Rates are deemed to be included for fixing of mild steel clamps of suitable size to hold the GI pipe. |
| 175 | Gun metal or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete of size 15mm dia complete all as specified and as directed. |
| 176 | PVC connection pipe heavy duty ISI marked of 15mm size with PTMT nuts of length 450mm from GI pipe to geyser complete all as specified and as directed by Engineer-in-Charge.Note: - PVC connection pipe should be compatible to hot and cold water. |
| 177 | Bib tap fancy type cast copper alloy with crutch or butterfly handle, screwed down for iron pipe 15mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 178 | Supply and fixing in replacement of 32 Amp, 230 Volt, single phase modular AC socket outlet matching with 32 Amp MCB with modular box, cover plate complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender