Defence Statutory Bodies & Commissions/Committees Closing in 32 days TDR #58281106

Tender For Repairs To Chain Link Fencing, Barbed Wires, Gates And Allied Works Under Age B/R Iii At Dssc Wellington

Issued by Statutory Bodies & Commissions/Committees · Nilgiris, Tamil Nadu
Tender Value
30 Lakhs
Estimated cost
Bid Submission
19 Dec 2026
32 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs To Chain Link Fencing, Barbed Wires, Gates And Allied Works Under Age B/R Iii At Dssc Wellington

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 05-Nov-2026 8723 Date Corrigendum Date 19-Dec-2026

BOQ

Name of Work:- REPAIRS TO CHAIN LINK FENCING, BARBED WIRES, GATES AND ALLIED WORKS UNDER AGE B/R III AT DSSC WELLINGTON
Sl. No. Item Description
1Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in natural ground complete all as specified and directed.
2Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete complete all as specified and directed.
3Taking down galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings, or any type fixed to precast RCC fencing posts/angle iron posts, struts, etc.complete all as specified and directed
4Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.
5Excavating in Post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfaces in soft/loose soil, complete all as specified and as directed.
6M&L for Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, etc., complete all as specified and as directed.
7S&F for Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work Conforming to Fe-290 Gde E-165 etc., complete all as specified and as directed.
8M& L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc., complete all as specified and as directed.
9S&F Mild steel flat iron for wind ties, incl drilling holes, securing bolt etc. and similar work conforming to Fe-290 Gde-E 165 etc., complete all as specified and as directed.
10S&F mild steel screw bolt, 5 to 10mm dia (machine made) with hexagonal head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm and not exceeding 10cm long etc., complete all as specified and as directed.
11M&L for Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc., complete all as specified and as directed.
12M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer etc., complete all as specified and as directed.
13M&L for Mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. Fe 410 W Gde E-250 Quality A or Fe 290 Gde E - 165 etc., complete all as specified and as directed.
14S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed. (each line wire to be measured).
15S&F in repairs punched type concertina coil 600 mm dia, as per IS 6745-1972, 3.0 mm core wire heavy galvanised (confirming IS 280-2006 zinc coating 240 gms/sqm) with galvanised coating and punched type material as per IS deep drawn quality with galvanised coating having large barbs fixed in position and secured to fence posts/Y arm stretched to a length so as to achieve 600 mm dia as in fencing including with GI fastners such as J, C,U+- clips fixed at any height of security fence or wall complete all as specified and as directed.
16Supply only Chain link MS galvanisd fencing, any size or type (100x100) etc., complete all as specified and as directed..
17Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc., complete all as specified and as directed.
18Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing debris outside MD land etc., complete all as specified and as directed.
19M&L Demolition of unreinforced concrete of any description and in any position not otherwise specifically provided including removing debris outside MD land etc., complete all as specified and as directed.
20S & F 110mm bore PVC (SWR) pipes, type 'B', single socketed, in any length with rubber ring joints, fixed to walls in weep holes complete all as specified and as directed.
21M & L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, cills ,string courses, apex stone, bed plates, kerbs, bands, lintels n.exc 1.5m length etc including necessary form work, weathering, slightly rounded or chamfered angles and throating all as specified and directed.
22M&L for Pre-cast cement concrete (Type C-1, 1:3:6 using 20 mm Graded stone aggregate) block masonry with solid blocks, exc. 10cm in width and setting in mortar, 1:6 complete as specified and as directed.
23M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 complete as specified and directed.
24M&L for preparing plastered surface and aplying two coats of cement base paint over a coat of chalk white primer complete all as specified and as directed.
25S&F for stainless steel (grade 304) railing made of hollow tubes, channels, plates etc, including embedded in cement concrete 1:3:6 to floors and welding, grinding ,buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories like SS ball caps ,floor caps etc complete including taking down old UNSV rail etc all as specified and as directed.
26S&F for stainless steel (grade 304) chain including necessary welding at joints, grinding to SS railing etc including taking down old UNSV SS chain etc all as specified and as directed.
27Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; for foundation getting out hard/dense soil complete all as specified and directed.
28M&L Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc., complete all as specified and as directed.
29Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed.
30Spreading and levelling with approved soil obtained from excavation in layers n exc. 25 cm thick, well ramming including watering as required for filling up the rear portion of wall etc., complete all as specified and as directed.
31Rough excavation not exceeding 1.5 m deep and getting out in hard/dense soil etc all as specified and as directed.
32Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil etc all as specified and as directed..
33Removing excavated material n exc. 50 m and depositing where directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58281106
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 30 Lakhs
LAST DATE 19-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs To Chain Link Fencing, Barbed Wires, Gates And Allied Works Under Age B/R Iii At Dssc Wellington
Basic Detail
Tender No 8723/E8
Bidding Type Tender
Location
City Nilgiris
State Tamil Nadu
Key Dates
Publish Date 05 Nov 2026
Submission Date 19 Dec 2026
Open Date 26 Dec 2026
Finance
Tender Value 30 Lakhs
Tender Fee 500
EMD 60000
Exemption Available
Document List
6f26b595-d9d7-4fca-bb62-07d63e4f86f8.html
8723Tender.pdf
BOQ_893325.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 19, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 32 days
Dec 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 32 days
Dec 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 39 days

Tender Documents

Download All (ZIP) ↓
html

6f26b595-d9d7-4fca-bb62-07d63e4f86f8.html

pdf

8723Tender.pdf

xls

BOQ_893325.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender