Tender For Comprehensive Maintenance To Se, Km And Dks Area Colony Of Age B/R-I Under Ge (N) Bikaner At Mil Stn Bikaner
Tender Value
90 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
14 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To Se, Km And Dks Area Colony Of Age B/R-I Under Ge (N) Bikaner At Mil Stn Bikaner
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames not exc. 1.50 sqm each but with shutter (w/o taking of shutter from the frame ) including Windows /ventilators complete all as specified and as directed by Engg-in-Charge. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item). |
| 2 | Taking down door shutter of any desc exc 1 Sqm and not exc 2 sqm and removing to store complete all as specified and as directed by Engg-in-Charge. |
| 3 | Taking down chowkhats or frames exc. 1.50 sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and as directed by Engg-in-Charge. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item). |
| 4 | Demolition of brick/stone masonry built in CM all as specified and M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 complete all as specified and as directed by Engg-in-Charge. |
| 5 | Taking up or down steel tubing 20 mm bore with Supply and laying of CPVC pipes (outer dia 20 mm) SDR 13.5 pipes & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and as directed by Engg-in-Charge. |
| 6 | Taking up or down steel tubing 25 mm bore with Supply and laying of CPVC pipes (outer dia 25 mm) SDR 13.5 pipes & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and as directed by Engg-in-Charge. |
| 7 | M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor or roof and finished even and fair without using extra cement complete all as specified and as directed by Engg-in-Charge. |
| 8 | Demolition Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engg-in-Charge. |
| 9 | M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed by Engg-in-Charge. |
| 10 | M&L for Rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed by Engg-in-Charge. |
| 11 | M&L for vitrified coloured tiles Dark shade/Double charged/Ultra charged 10 mm thick (Square/ rectangular ) polished ,area of each tile exc 0.42 sqm but n.exc. 1.00 sqm ( Size 600x120mm) in floors etc.set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 20 mm thick screed bed in CM 1:4 including dismantling of old tiles complete all as specified and as directed by Engg-in-Charge. |
| 12 | M&L for vitrified coloured tiles Dark shade/Double charged/Ultra charged 10 mm thick (Square/ rectangular ) polished ,area of each tile exc 0.42 sqm but n.exc. 1.00 sqm in skirting,dado etc.set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 10 mm thick plaster in CM 1:4 including dismantling of old tiles complete all as specified and as directed by Engg-in-Charge. |
| 13 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors and skirting ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 20 mm thick screed bed in CM 1:4 including dismantling of old tiles complete all as specified and as directed by Engg-in-Charge. |
| 14 | M&L for Glazed ceremic coloured tiles in vertical surfaces 300x450x7/8 mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) including dismantling of old tiles complete etc complete all as specified and as directed by Engg-in-Charge. |
| 15 | M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in platform or as in vertical surface over 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished rough including dismantling if required and rounding/moulding to egdes complete all as specified and as directed by Engg-in-Charge. |
| 16 | M&L for Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed by Engg-in-Charge. |
| 17 | Supply and fixing factory made uPVC white colour Three track three panels sliding window or Two track two panels sliding window with fly proof S.S wire mesh /Glazed , made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners of suitable size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed by Engg-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 18 | Supply and fixing factory made uPVC white colour fixed /openable glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 1.50 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners of suitable size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed by Engg-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 19 | S&F for factory made single extruded WPC ( Wood polymer composite) solid door /window/ceosetory windows& other Frames/Chowkhat of size 65x100 mm compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N ( Edge),minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and as directed by Engg-in-Charge. ( MS holdfast / lugs dash fastners shall be included in unit rate of item). Note:- For WPC solid door/window frames,minus 5 mm toletance in dimension i.e. depth and width of profile shall be acceptable .Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | All as per item No 19 here-in-before but frame size 65x125 mm. |
| 21 | S&F for factory made single extruded WPC ( Wood polymer composite) solid decorative type flush door shutter of size 35 mm thick compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N ( Edge),minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws , complete all as specified and as directed by Engg-in-Charge. Note:-04 Nos SS butt hinges and SS screws shall be included in unit rate of item. |
| 22 | All as per item No 21 here-in-before but skelton door shutters of 35 mm thick |
| 23 | S&F Flush Shutters 30 mm thick , solid core construction, with block board core and plywood face panel , commercial type on both side complete. Including edges of door covered with teak bid and makng provision for fixing mortice lock and hinges complete all as specified and as directed by Engg-in-Charge. |
| 24 | S & F hard wood glazed and skeleton shutters 30 mm open rebated and prepared to receive glass, gauze etc, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I section 8, clause 8.20 (a) supplied and fixed to chowkats complete all as specified and as directed by Engg-in-Charge. |
| 25 | Supply and fixing of 100 mm SS Butt hinges, complete all as specified and as directed by Engg-in-Charge. |
| 26 | S&F for 150 mm stainless steel handles / SS tower bolts complete all as specified and as directed by Engg-in-Charge. |
| 27 | S&F SS sliding door bolt, length 250 mm including a minimum of 6 bolts, nuts and washers complete all as specified and as directed by Engg-in-Charge. |
| 28 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover plate 150 mm complete all as specified and as directed by Engg-in-Charge. |
| 29 | S&F 300 mm Long ordinary rat tail rod pattern spring of mild steel including roller and roller plate fixed to welding or screw with chowkhats or frames as in repairs complete all as specified and as directed by Engg-in-Charge. |
| 30 | Hacking out old broken glass (any thickness size quality or desc.)from wooden frames or stone conc. or brick surrounds glazed with putty or fixed with beads alnd S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane complete all as specified and as directed by Engg-in-Charge. |
| 31 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and uPVC window complete all as specified and as directed by Engg-in-Charge. |
| 32 | S&F in repair 25 mm dia and 3mm thick stainless steel curtain rod chromium plated incl fency type brackets, stops etc.(Approved by GE) complete all as specified and as directed by Engg-in-Charge. |
| 33 | S&F 18/19 mm thick single side Pre laminated PVC Boards suitablely fixed in kitchen cabinets/Cupboards,frames, partitions and shelves of built in cup boards,almirahs and similar work etc of any finish including suitable magnatic catcher, Piano hinges, SS hasp and stapple ,SS handles etc. complete all as specified and as directed by Engg-in-Charge including taking down old Board. |
| 34 | S&F Powder coated aluminum frames/shutter ,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified and as directed by Engg-in-Charge. |
| 35 | S & F in repair aluminium glazing clip or rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and as directed by Engg-in-Charge. |
| 36 | S&F sheet glass 4.8 mm thick ordinary quality & glazing with rubber gasket in squares n exc 0.5sqm in each pane as in aluminium /uPVC door/window, complete all as specified and as directed by Engg-in-Charge. |
| 37 | S&F for 150mm size aluminium anodised barrel tower bolt of extruded section/ handle of fabricated type complete all as specified and as directed by Engg-in-Charge. |
| 38 | M&L Sand stone slab 50mm thick as in chajjas, sunshade , man holes covers ,plateform etc. n exc 2 m in length punched dressed on face and along exposed edges,self faced on other side and set in cement mortar 1:4 incl.making chases in wall including dismantling old stone slab all as spfd. |
| 39 | S&F in repair rotational mouleded polythene water storge tank any colour triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified of 500 ltr capacity include dismandling old water tank and remove from site complete all as specified and as directed by Engg-in-Charge. |
| 40 | S&F in repair 20 mm dia of ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, (minimum weight 20mm-210 gms) complete all as specified and as directed by Engg-in-Charge. |
| 41 | M&L for cleaning and removing all scale and dirt etc from 500 ltr capacity tanks anf from mouths of circulating pipes etc complete all as specified and as directed by Engg-in-Charge. |
| 42 | S&F in repairs,stop /gate valve with butterfly handle ,screwed both ends for iron pipe of dia 20 mm complete all as specified and as directed by Engg-in-Charge. |
| 43 | S&F in repairs wall hung water closet ( size 510x365x380 mm) of superior quality including all fitting fixtures concealed cistern complete all as specified and as directed by Engg-in-Charge. |
| 44 | S&F in repairs vitreous China pedestal pattern white, P trape and S trape (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe,Seat cover etc. complete all as specified and as directed by Engg-in-Charge. |
| 45 | S&F in repairs PVC flushing cistern 10 ltrs capacity incl flushing pipe and connections complete. as approved by Engineer in charge,low level, white with inlet, ball valve complete all as specified and as directed by Engg-in-Charge. |
| 46 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including brackets & waste pipe etccomplete all as specified and as directed by Engg-in-Charge. |
| 47 | S&F in repair 15 mm bore Brass CP Wall (Telephonic/Non telephonic )/WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engg-in-Charge. |
| 48 | S&F in repair chromium plated Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and as directed by Engg-in-Charge. Make :Hindware Italian Cat No F690004 or equivalent out of makes specified in list of makes. |
| 49 | S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm complete all as specified and as directed by Engg-in-Charge. |
| 50 | S&F in repair fancy type chromium plated stop valve/Angle valve ( one way or two way as directed ) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm complete all as specified and as directed by Engg-in-Charge. |
| 51 | S&F in repair 15 mm bore brass fancy concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe complete all as specified and as directed by Engg-in-Charge. |
| 52 | S&F in repairs health faucet (ABS body) mild steel CP suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engg-in-Charge. |
| 53 | S&F Brass chromium plated Towel Ring/Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engg-in-Charge. |
| 54 | S&F Corner glass shelf of size 300mmx200x150mm fancy type, toughned glass, with CP bracket and guard railing, fixed along wall with CP brass screws and PVC plug complete all as specified and as directed by Engg-in-Charge. |
| 55 | S&F in repair CP stainless steel toilet paper holder fancy type complete all as specified and as directed by Engg-in-Charge. |
| 56 | S&F in repair brass CP shower roses with swivel joints with shower arm ,any size,including fixing to pipe or union complete all as specified and as directed by Engg-in-Charge. |
| 57 | S&F 5 mm thick looking mirror of selected quality with and including stainless steel spacers complete all as specified and as directed by Engg-in-Charge. |
| 58 | S&F in repair 32 mm size CP waste coupling incl waste pipe (half or full threaded) complete all as specified and as directed by Engg-in-Charge. |
| 59 | S&F in repair SS soap dish complete all as specified and as directed by Engg-in-Charge. |
| 60 | S&F in repairs stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460 mm bowl size 410 mm x 330 mm x 160mm including waste pipe ,connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed by Engg-in-Charge. |
| 61 | S&F stainless steel plate racks, glossy finish, for kitchen overall size 900mm x900mm complete fixed in position as recommended by manufacturer with SS screws/fasteners etc complete all as specified and as directed by Engg-in-Charge. |
| 62 | S&F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall or laid in trenches of 110/75 mm including suitable bends as required including dismantling old pipes complete all as specified and as directed by Engg-in-Charge. |
| 63 | S&F PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and as directed by Engg-in-Charge. |
| 64 | M&L for Repair of rolling shutters of any type any height and any length making functional by providing greasing oiling , welding etc.including taking down rolling shutters or hood if required complete all as specified and as directed by Engg-in-Charge. |
| 65 | M&L for New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engg-in-Charge. |
| 66 | M&L for Old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and as directed by Engg-in-Charge. |
| 67 | M&L for preparing of New plastered surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc applying one coat of primer and applying two coats of acrylic distemper/OBD paint of approved tint over 3 mm thick wall care putty over new plastered surfaces of wall etc complete all as specified and as directed by Engg-in-Charge. |
| 68 | M&L for preparing of New plastered surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc applying one coat of primer and applying two coats of acrylic distemper/OBD paint of approved tint over 3 mm thick wall care putty over new plastered surfaces of ceiling etc complete all as specified and as directed by Engg-in-Charge. |
| 69 | M&L for Old decorated surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two coat of acrylic distemper/OBD on walls /ceiling complete all as specified and as directed by Engg-in-Charge. |
| 70 | M&L for applying acrylic wall care putty on new or old surfaces of wall/RCC surface/Soffits of chajjas/roof rojections/centilevers/balcony etc. by using ready made wall care putty including sand papaering after filling the putty to make surface smooth and ready for receiving primer/ painting complete all as specified and as directed by Engg-in-Charge. |
| 71 | M&L for Preparing of Old surfaces plastered or unplastered by mechanical sander brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two coat of white wash on old decorated surfaces of wall/ceiling include cornices complete all as specified and as directed by Engg-in-Charge. |
| 72 | M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a priming coat of pink primer complete all as specified and as directed by Engg-in-Charge. |
| 73 | M&L for Old painted wooden surfaces of any description not otherwise described over 10 cm width & girth & applying one coat of synthetic enamel paint complete all as specified and as directed by Engg-in-Charge. Please Enable Macros to View BoQ information |
| 74 | M&L for Old painted wooden surfaces of any description not otherwise described over 10 cm width & girth & applying one coat of synthetic enamel paint complete all as specified and as directed by Engg-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender