Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58281094

Tender For special Repairs To External Side Stone Wall Surfaces And Flooring Along With Allied Works At Dept Of Anesthesia, Hq Trg Team, Community Medicine Dept And Internal Medicine At Afmc Under Ge (Central) Pune

Issued by Statutory Bodies & Commissions/Committees · Pune, Maharashtra
Tender Value
47.43 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
94860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repairs To External Side Stone Wall Surfaces And Flooring Along With Allied Works At Dept Of Anesthesia, Hq Trg Team, Community Medicine Dept And Internal Medicine At Afmc Under Ge (Central) Pune

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 19-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 26-Nov-2026

BOQ

Name of Work:- Spl repairs to external side stone wall surfaces and flooring along with allied works at dept of anesthesia, HQ Trg team, community medicine dept and internal medicine at AFMC under GE (Central) Pune
Sl. No. Item Description
1M&L for preparation old stone surfaces, applying coat of hydrophobic solvent base silane – siloxane with a very high degree of penetrative action having bond adhesion of min. 1.6 Mpa which prevents dirt, chloride, carbonation, and water penetration and Providing and applying Elastomeric, Anti carbonation, Anti corrosive, UV resistant, solvent based Pure Aliphatic Acrylate System APCOREP MONOPOL on the concrete surfaces having Electrochemical impedance of 10 Ω in 3% Nacl AC impedance test, shall reduce chloride ion penetration by 91% and achieve dry film thickness of minimum 200 microns in a primer coat followed by two top coats using brush or spray after complete all as specified and directed. cleaning & removal of oil, grease or loose particles from the surface. Make : Asian paints, Berger or techno commercially equivalent.
2M&L for raking out joints/pointing in cement mortor to masonry or brick-work in single detached joints for flashing, etc complete all as specified and directed.
3M&L for flush pointing to block in course or ashlar masonry or concrete block walling cement mortar 1:3 complete all as specified and directed.
4M&L for mirror polishing on old terrazo tiles/marble/granite/Kota stone/stone work including filling joint with pigment to match to give high gloss finish complete all as specified and directed.
5M&L for chipping of slab/chajjas/parapet/roof projection and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brushes etc and disposal of debris for all lead and lifts, all complete all as specified and directed.
6M&L for cleaning & applying rust remover (Sika rust off 100) in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/rust passivation Inhibitor coat at the rate of 6-8 sq. mtr/ltr not less than 50 microns dft with Sika friazinc R or techno commercially equivalent to reinforcement surface as per manufacturer’s instructions including all scaffolding, machinery, tools tackles and clearing of debris complete all as specified and directed. Make : STP/Chemsol/Bostik/Choksey/Fosroc as approved by GE.
7M&L for single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitiouspatch repair mortar Sika monotop 122F (having the technical parameters mentioned in material specifications) capable of applying up to 20-25mm thick in double layer or multiple layers initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness complete all as specified and directed. Make : STP/Chemsol/Bostik/Choksey/Foscroc as approved by GE.
8Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC roof as per specifications and direction of Engineer-In-charge complete. in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer complete all as specified and directed. Make :- STP/Chemsol/Bostik/Choksey/Fosroc as approved by GE.
9Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, smartCare Ultrablock Block 2K Suin 2 coats having 200 % elongation as per ASTM 2370, resisting 5 bars hyrostatic pressure as per DIN 1048, crack bridging min. 2mm as per EN 1062 -7 :2004.Applying SC Ultra block 2k in two coats in SSD condiition at a coverage of 1.5 kg per sqm with mixing of powder to Liquid in the ratio of 60:40 parts by weight as per manufacturers specifications complete all as specified and directed.
10S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia including holding brackets etc including dismantling of old pipes complete all as specified and directed.
11S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm dia including holding brackets etc.including dismantling of old pipes complete all as specified and directed.
12S&F PVC (SWR) bends with access door of 110 mm dia, any radius complete all as specified and directed.
13S&F PVC(SWR) bends with access door of 75 mm dia, any radius complete all as specified and directed.
14S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.
15S&F PVC (SWR) bends of 75mm dia, any radius complete all as specified and directed.
16S&F PVC (SWR) vent cowl, 100 mm dia complete all as specified and directed.
17Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm & removing from site complete all as specified and directed.
18S&F 12 mm thick single/double shutter toughened glass door at entrances, etc. (each door shutter counted individually, area of shutter as per site requirement) as demarcated, swing type door openable both sides made out of 12mm thick extra ultra clear toughened float glass, edge polishing, fixed on granite frame work/any type door frame work with appropriate heavy duty fixing materials such as 01 xTop Pivot, 01 xTop Patch, 01 xfloor springs, 01 xBottom Patch, 01 xPach Lock with Keys etc and one set of 25mm dia SS brush finish pull handles (approx300mm length) \\"C\\" shaped of approved make & design on both sides of approved make Godrej/Everite/Ozone/Hardwyn/Dorma or techno commercially techno commercially equivalent with and including providing \\"PUSH\\" & \\"PULL\\" stickers labels of approved design & make. The rate to include all materials, labour, transport, taxes, delivered and placed in position at site of work. Each door shall be treated individually with complete all as specified and directed. set of accessories to be provided on each door, complete all as specified and directed.
19Dismantling plywood/boarding, ceiling etc any description, fixed in any position with nails or screws complete all as specified and directed.
20Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins etc. under 40 sq cm in section complete all as specified and directed.
21S&F anodised Aluminium frame for doors, windows, ventilators or partion, support to wall panelling with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
22M&L for 12 mm thick plywood, grade BWP, type BB fixed with screws to Aluminium framework complete all as specified and directed.
23M&L for 6mm thick veneered decorative type fixed on plywood with adhesive and nails complete all as specified and directed.
24M&L for two or more coats of french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.
25M&L for 1st class hardwood moulding as in cornices, picture rails and the like fixed with screws, sectional area exc 6 but not exc 13 sqcm etc complete all as specified and directed.
26S&F false ceiling using Non Asbestos (Fiber cement) decorative tiles of Size 595mm x 595mm x 4mm thick including GI snap grid of size (600mmx60mm) using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 24 x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mmx32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200 mm center to center in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans/light complete all as specified and directed.
27Complete removal of existing treatment by means of machine i.e smart periodical method and applying two coats of oil bound distemper incl one coat of primer on walls complete all as specified and directed.
28M&L for preparation of old decorative surfaces of ceiling incl, cornices (plastered or unplastered) by brooming down and scrapping wherever necessary by means machine i.e smart periodical method and applying one coat of oil bound distemper on ceiling complete all as specified and directed.
29Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm removing from site complete all as specified and directed.
30S&F II nd class hard wood (haldu/hallock) plain, solid, straight chowkatS&Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
31S&F 18mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed.
32S&F 18mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, one side white lamination fixed with screws to timber frame work complete all as specified and directed.
33S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm complete all as specified and directed.
34S&F ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed complete all as specified and directed.
35Supply and fix 100 mm long fabricated type anodised extruded Aluminium alloy handles complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58281094
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.43 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repairs To External Side Stone Wall Surfaces And Flooring Along With Allied Works At Dept Of Anesthesia, Hq Trg Team, Community Medicine Dept And Internal Medicine At Afmc Under Ge (Central) Pune
Basic Detail
Tender No 8769 SPL REPAIRS TO EXTERNAL SIDE STONE WALL SURFACES AND FLOORING ALONG WITH ALLIED WORKS AT DEPT O
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 19 Nov 2026
Submission Date 26 Nov 2026
Open Date 03 Dec 2026
Finance
Tender Value 47.43 Lakhs
Tender Fee 500
EMD 94860
Exemption Available
Document List
5c436759-887a-4adb-85ae-00642a80d630.html
BOQ_893114.xls
TENDER8769.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 4 days
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

5c436759-887a-4adb-85ae-00642a80d630.html

xls

BOQ_893114.xls

pdf

TENDER8769.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender