Tender For Special Repair To Certain Buildings Of Mes (Otm) At Sunjuwan Under Ge Jammu.
Tender Value
47.13 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
16 days left
EMD
94260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Certain Buildings Of Mes (Otm) At Sunjuwan Under Ge Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | B/R Portion: -Demolition of brick masonry built in cement mortar including all quions, arches, pillars etc. complete all as specified and as directed. |
| 2 | Brick work of old size sub class ‘B’ bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 3 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints hacking for key scrubbing with water etc complete all as specified and as directed. |
| 4 | Rendering 15mm thick in cement mortar (1:4) on fair faces of brick surface finished even and fair including water proofing compound complete all as specified and as directed. (Including all necessary scaffolding, lifting arrangement up to 10 mtr height). |
| 5 | Rendering 10 mm thick cement plaster (1:6) on other than fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and as directed. |
| 6 | Reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span-reamed piles and mass concrete complete all as specified and as directed. |
| 7 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter complete all as specified and as directed. |
| 8 | TMT bars (Fe 500), 10mm dia and over in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 9 | Description all as per Ser item No 8.00 here-in-before but 8 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed. |
| 10 | Rendering 5 mm thick cement plaster (1:3) on fair faces of concrete surfaces as in ceiling, chajja, shelves etc. finished even and smooth without using extra cement complete all as specified and as directed. |
| 11 | Preparing of new plastered surface of ceiling and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Preparing of new plastered surface of wall and applying 1mm thick wall care putty and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Preparation of newly plastered surface and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive and Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 litres (undiluted)/ 10 Sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/10 Sqmtrs diluted with water in (1:1) ratio and 1mm thick exterior grade wall putty as per manufacturer's instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hours to dry the surface in subsequent coats of paint complete all as specified and as directed.Notes: - (a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the material i.e. paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by GE.(b) The contractor shall upload along with the documents under cover-I, 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 14 | Factory made uPVC white colour Three track three panels sliding window with fly proof stainless steel wire mesh (Two no's glazed and one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm and sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.75 Sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash bars shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and as directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately).Note: - For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 15 | 4.8mm thick ordinary quality complete with aluminium beads in any size complete all as specified and as directed. |
| 16 | Solar control film 50 micron reflective type sticked to glass panes as per manufacturer's complete all as specified and as directed. |
| 17 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 18 | Powder coated aluminium three track sliding window, consisting two shutter of 5.5mm thick plain glass shutter and one shutter of stainless steel wire cloth of 0.56 mm dia and 1.18 mm aperture including wire gauge shall be fixed with the help of 40 mm powder coated aluminium flat, other section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc complete all as specified and as directed section of member are as under: -(i) Frame Bottom track -92mm x 31.75mm x 1.5mm thick of Jindal section cat part No 20832 or equivalent in makes as mentioned in Group - I of Appx 'F'.(ii) Frame Top and side section -92mm x 31.75mm x 1.5mm thick of Jindal section cat part No 20831 or equivalent in makes as mentioned in Group - I of Appx 'F'.(iii) Shutter – side (vertical) section -40mm x 18mm x 1.3mm thick of Jindal section cat part No 20687 or equivalent in makes as mentioned in Group - I of Appx 'F'.(iv) Shutter Lock rail (Vertical) section - 40mm x 18mm x 1.29mm thick of Jindal section cat part No 20845 or equivalent in makes as mentioned in Group - I of Appx 'F'.(v) Shutter Top and Bottom section - 40mm x 18mm x 1.29mm thick of Jindal section cat part No 20844 or equivalent in makes as mentioned in Group - I of Appx 'F'. |
| 19 | Powder coated aluminium door, shutter of 5.5mm thick plain glass shutter including all necessary fiber beading, handle, floor mounted spring and all necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc complete all as specified and as directed section of member are as under: -(i) Frame - 63.50mm x 38.10mm x 1.5mm thick of Jindal section cat part No 20125 or equivalent in makes as mentioned in Group - I of Appx 'F'.(ii) Shutter top, middle and bottom rail section - 100mm x 44.45mm x 2.0mm thick of Jindal section cat part No 19653 or equivalent in makes as specified in Group - I of Appx 'F'.(iii) Shutter – side (vertical) hinge side section - 83.50mm x 44.45mm x 1.87mm thick of Jindal section cat part No 19582 or equivalent in makes as specified in Group - I of Appx 'F'.(iv) Shutter – side (vertical) lock side section -85.0mm x 44.45mm x 1.80mm thick of Jindal section cat part No 19572 or equivalent in makes as specified in Group - I of Appx 'F'. |
| 20 | Mild steel framed works such as grills, framed guard bars, etc and similar work as in cooler stands, chazza stand etc. conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. |
| 21 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 22 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed. |
| 23 | Pressed steel frames for door (factory made) out of 1.25 mm thick black mild steel sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete size of frame 105 x 60mm including bottom of each chowkhat to be welded with 2 Nos 25 x 25 x 3 mm thick flat iron projecting 10 cm on either side including one shop coat of red oxide primer complete all as specified and as directed. |
| 24 | Pressed steel frames for door (factory made) out of 1.25 mm thick black mild steel sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete size of frame 125 x 60mm including bottom of each chowkhat to be welded with 2 Nos 25 x 25 x 3 mm thick flat iron projecting 10 cm on either side including one shop coat of red oxide primer complete all as specified and as directed. |
| 25 | Cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) as in backfill of pressed steel door frames complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Solid PVC door frame of size 50mm x 47mm made out of 5mm PVC sheet and edges will be painted to match with printed sheet, reinforced with mild steel square tube supplying and fixing in opening as per specification complete all as specified and as directed. |
| 27 | Factory made solid PVC moulded door shutter with particle board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawings complete all as specified and as directed. |
| 28 | 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both faces are covered with decorative face veener with lipping/ frame to match complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Factory made 35 mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 30 | Preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint complete all as specified and as directed. |
| 31 | Compound girders and stanchions, lattice girders, aerial masts, Posts for sheds and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including lattice bars, stiffeners, gusset plates, etc confirming to Fe-290 (Gde E 165) complete all as specified and as directed. |
| 32 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E 165) complete all as specified and as directed. |
| 33 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E 165) complete all as specified and as directed. |
| 34 | Painting with synthetic enamel paint two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and as directed. |
| 35 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 36 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws complete all as specified and as directed. |
| 37 | Stainless steel butt hinges 100mm long medium weight cold rolled complete all as specified and as directed. |
| 38 | Mild steel barrel tower bolts, stove enamelled black, with bright bolt of size 150 mm complete all as specified and as directed. |
| 39 | Aluminium handle of size 150 mm complete all as specified and as directed. |
| 40 | Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 41 | Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 42 | Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed. |
| 43 | 4.8mm thick sheet glass ordinary quality complete with aluminium beads in any size complete all as specified and as directed. |
| 44 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing unserviceable material exceeding 100 mtr complete all as specified and as directed. |
| 45 | Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 46 | Providing 75 mm thick plain cement concrete (1:4:8) mix, type D-2 (using 40mm graded crushed stone aggregate) as sub-base floor complete all as specified and as directed. |
| 47 | Glazed ceramic tiles 300 x 450 x 7mm thick on vertical surface such as in skirting, dado etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed. |
| 48 | Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.18 Sqm, in floors etc. fixed with approved tile adhesive and gaps to be filled with approved epoxy grout complete all as specified and as directed. |
| 49 | Vitrified tiles light shade (thickness to be specified by manufacturer) (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc. in approved colour and shade and jointed in neat cement slurry and pointed in white or coloured cement to fixed with approved tile adhesive and gaps to be filled with approved epoxy grout complete all as specified and as directed. |
| 50 | Vitrified tiles light shade (thickness to be specified by manufacturer) (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. in approved colour and shade and jointed in neat cement slurry and pointed in white or coloured cement to fixed with approved tile adhesive and gaps to be filled with approved epoxy grout complete all as specified and as directed. |
| 51 | Vitrified ceramic tiles light shade (thickness to be specified by manufacturer) (square/ rectangular) polished, in approved colour and shade, in skirting, riser, of steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to fixed with approved tile adhesive and gaps to be filled with approved epoxy grout complete all as specified and as directed. |
| 52 | Granite (of any type) 16-20mm thick (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:6) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed. |
| 53 | Solid PVC Wall Lining/ Panelling consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 54 | 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing onto wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 55 | Providing and fixing in position suspended false ceiling with 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over and including metal frame work and reinforced with G.I. wire mesh including applying two or more coats of premium acrylic distemper over a coat of primer and 1mm thick putty complete all as specified and as directed. |
| 56 | Providing and fixing in position suspended false ceiling system using 'E' Grid suspended ceiling Grid system. The size of Grid shall be 600 x 600mm with GI frame work, main runner 39 x 24mm, cross tee 29 x 24mm and wall angle 22.2 x 22.2mm using 4mm thick high pressure stream cured non primered classic/ designer variant E-Board ISI marked IS No 14862-2000. Fibre cement 'E' Board to be placed in the gird of 'E' Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butterfly clips including dismantling wall and ceiling boards (fibre pulp/ insulation) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixing the same in position after replacing the ceiling complete all as specified and as directed. |
| 57 | 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid to an outward slope of not less than (1:12), cast in panels not exceeding 2.0 Sqm areas with 6 mm wide joints. The joint shall be filled with mastic filling and 10 mm wide joints between the walls and plinth protection shall be filled with mastic filling and finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 58 | PVC (SWR) pipes 110 mm bore single socketed in any length with rubber joint fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and as directed. |
| 59 | PVC (SWR) pipes 75 mm bore single socketed in any length with rubber joint fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and as directed. |
| 60 | PVC (SWR) bends of 110 mm bore complete all as specified and as directed. |
| 61 | PVC (SWR) bends of 75 mm bore complete all as specified and as directed. |
| 62 | PVC (SWR) Tee 110mm bore any radius with access door complete all as specified and as directed. |
| 63 | PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and as directed. |
| 64 | PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed. |
| 65 | Vitreous china Pedestal type water closet white, with 'P' or 'S' trap including 10 litre capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float valve and handle, polyethylene of low level or high density or PVC 32mm dia flush pipe, plastic water closet seat back, closed pattern with flat bottom and self closing cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 66 | Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and as directed. |
| 67 | Supply and fixing in repair stop valve/ angle valve cast copper chromium plated screwed down high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed. |
| 68 | Stainless steel gratings of 125 mm with waste holes of PTMT (minimum weight of 40 gms) complete all as specified and as directed. |
| 69 | Supply and fixing in repairs 15mm bore chromium plated Basin/ Sink mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Supply and fixing in repairs Chromium plated Soap dish of chromium plated complete all as specified and as directed. |
| 71 | Supply and fixing in repairs Curtain Rods 25mm dia mild steel, chromium plated with fixing brackets, stops, side funnels etc complete with all fittings all as specified and as directed. |
| 72 | 20mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down 15mm steel tubing complete all as specified and as directed. |
| 73 | 25mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down 20mm steel tubing complete all as specified and as directed. |
| 74 | Supply and fixing for providing Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified and as directed. |
| 75 | Cutting chases for concealed water tubing or concealed conduit and making good in cement mortar (1:3) of girth exceeding 10 cm and not exceeding 20 cm in brick wall complete all as specified and as directed. |
| 76 | 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 77 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 45cm long and 15cm wide with chromium plated bracket guard and railing complete all as specified and as directed. |
| 78 | Tubular towel rail 20mm dia 'D' type 60cm long between flanges chromium plated complete all as specified and as directed. |
| 79 | Vitreous China wash hand basins of size 550 x 400 mm (Flat Back or Angle Back type) including 32mm bore PTMT Waste coupling, waste pipe and PVC connection pipe of 15mm x 450mm long, a Pair of Angle iron Brackets duly painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed surfaces in cement mortar (1:3) complete all as specified and as directed. |
| 80 | Complete removal of existing treatment on roof surface upto naked concrete surface complete all as specified and as directed. |
| 81 | 15mm thick cement mortar (1:4) as in screed bed on roof surface finished with even and fair surface including water proofing compound complete all as specified and as directed. |
| 82 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified and as directed. |
| 83 | APP based polymeric membrane minimu weighing 3 Kg/ Sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/ Sqm) laid on primed surface by forced application including two coats of aluminium paint complete all as specified and as directed. |
| 84 | Supply only integral water proofing admixture of approved quality complete all as specified and as directed. |
| 85 | Rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank, including 20mm ball valves, 20mm tank nipple complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Supply and fixing in repairs 20 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 87 | Supply and fixing in repairs 25 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 88 | Dismantling fencing wire mesh any type complete all as specified and as directed. |
| 89 | Dismantling post or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed area/ ground complete all as specified and as directed. |
| 90 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and as directed. |
| 91 | Cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete complete all as specified and as directed. |
| 92 | Round bars 10 mm dia and over cut to length bent to shape required for securing of fencing wire complete all as specified and as directed. |
| 93 | Mild steel angle iron for fencing post/ strut including embedding in concrete and screwing etc. including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 94 | 12 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm long but not exceeding 10cm complete all as specified and as directed. |
| 95 | Galvanised, two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.Note: - Each line wire to be measured. |
| 96 | Supply only Chain link mild steel galvanised fencing, any size or type complete all as specified and as directed. |
| 97 | Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 98 | Exterior grade full body vitrified tiles matt finished 400 x 400 x 12mm thick set jointed in neat cement slurry and pointed with grey cement and pigments to match the shade of tile pattern as approved in floors including 15mm thick screed in cement mortar (1:6) complete all as specified and as directed. |
| 99 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 100 | Preparation of old plastered surfaces and applying two or more coats of oil bound distemper on walls/ ceiling etc complete all as specified and as directed. |
| 101 | Complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/ Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ ceiling by filling cracks/ crack fill paste and make good smoothen surface by sand paper and applying two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 1mm thick exterior wall care putty complete all as specified and as directed. (Including all necessary scaffolding, lifting arrangement upto 10 mtr height). Notes: - (a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the material i.e. paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by GE.(b) The contractor shall upload along with the documents under cover-I, 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the Contract, failing which the bid shall be liable to be rejected. |
| 102 | Preparation of old painted surface of wood and wood based materials of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed. (Including all necessary scaffolding, lifting arrangement upto 10 mtr height). |
| 103 | Preparation of old painted surface of steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed. (Including all necessary scaffolding lifting arrangement upto 10 mtr height). |
| 104 | Earth work in excavation by mechanical means (Hydraulic excavator) in any type of soil in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil, within a lead of 50 m complete all as specified and as directed. |
| 105 | Cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed. |
| 106 | 200mm dia reinforced concrete pipes, class NP-2, laid and jointed complete with collars complete all as specified and as directed. |
| 107 | Cement concrete type D-2 (using 40 mm graded crushed stone aggregate) as in bed to drain pipes of 200mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 108 | Providing cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required complete all as specified and as directed. |
| 109 | Providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slab of manholes, septic tank, soak well etc set in cement mortar (1:4) with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and as directed. |
| 110 | 1.25 mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and as directed. |
| 111 | E/M Portion: -Material and labour in repairs for Sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 4 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed.Note: - Wiring shall be done in proper colour coding. |
| 112 | Material and labour in repairs for Sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed.Note: - Wiring shall be done in proper colour coding. |
| 113 | Taking down old unserviceable copper/ aluminium point wiring concealed/ batten (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden/ iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 114 | Point wiring for one light/ fan/ call bell point controlled by one 5 Amp switch with 1.5 Sqmm two single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC conduit ISI marked including modular metal flush boxes of any way along with white cover plate with frame for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following: -Notes: - (a) Wiring shall be done by using proper colour coding including making disturbed surface good.(b) Earth wire shall be of green colour.(c) On RCC roof/ ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.(d) Rates are inclusive of cutting/ chasis and making good to disturbed surfaces of wall/ floor. |
| 115 | Description all as per Ser item No 114.00 here-in-before but 5 Amp socket outlet on same board complete all as specified and as directed. |
| 116 | Description all as per Ser item No 114.00 here-in-before but socket outlet 5 Amps independent board complete all as specified and as directed by Engineer-in-Charge. |
| 117 | Description all as per Ser item No 114.00 here-in-before but for one 6 pin socket outlet 15 Amps on independent board with cables 2.5 Sqmm size complete all as specified and as directed. |
| 118 | Point wiring for one light/ fan/ call bell point controlled by one 5 Amp switch with 1.5 Sqmm two single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid/ steel conduit and including new Modular Metal flush Boxes of any way along with white cover plate with frame for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following: -Notes: - (a) Wiring shall be done by using proper colour coding including making the disturbed surface good.(b) Earth wire shall be of green colour.(c) On RCC roof/ ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.(d) Rates are inclusive of providing new conduit including PCC works where there is a damage/ blockage in existing conduit. |
| 119 | Description all as per Ser item No 118.00 here-in-before but One 5 pin socket outlet 5 amps on the same board complete all as specified and as directed. |
| 120 | Description all as per Ser Item No 118.00 here-in-before but One 5 pin socket outlet, 5 amps, independent complete all as specified and as directed. |
| 121 | Description all as per Ser item No 118.00 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with cables 2.5 Sqmm size complete all as specified and as directed. |
| 122 | Modular switch 1 way 6 A, 1 module, 240 volts ISI marked complete all as specified and as directed. |
| 123 | Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and as directed. |
| 124 | Modular Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed. |
| 125 | Modular Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed. |
| 126 | Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and as directed. |
| 127 | Ceiling Rose 3 terminal surface type complete all as specified and as directed. |
| 128 | Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 129 | Self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed. |
| 130 | LED light fitting 1 x 20W, 220 V, PVC batten along with driver, holder and power factor >0.90, SPD 2.5 KV, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 131 | LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 132 | Bulk head luminaries IP-65 with opal diffuser 10 watt, 230 Volts LED type complete with 10 watt LED Bulb complete all as specified and as directed by Engineer-in-Charge. |
| 133 | LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof, ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 134 | Point wiring for AC point controlled by one modular MCB with 4.0 Sqmm two single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 4.0 Sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into concealed PVC rigid/ steel conduit including fixing of new Modular Steel terminal boxes of required size along with modular white cover plate with frame of suitable size for mounting sockets and modular MCB etc complete all as specified and as directed.Notes: - (a) Wiring shall be done by using proper colour coding including making the disturbed surface good.(b) Earth wire shall be of green colour.(c) On RCC roof/ ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.(d) The rates are inclusive of cutting/ chasis with suitable PCC works and making good to disturbed surfaces. |
| 135 | Polycarbonate Modular AC box with 15 Amp socket and 32 Amp MCB SP complete all as specified and as directed. |
| 136 | Supply and fixing in repairs distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge.Note: - Distribution board and MCBs should be of same make. |
| 137 | Supply and fixing in repairs 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB distribution board complete with connection testing and commissioning complete all as specified and as directed. |
| 138 | Supply and fixing in repairs 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the V.TP&N distribution board complete with connection testing and commissioning complete all as specified and as directed. |
| 139 | Supply and fixing in repairs SPN 40 to 63 Amp rating 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection testing and commissioning complete all as specified and as directed. |
| 140 | Supply and fixing in replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud V.TP&N 4 way 415 volts double door complete with fixing arrangement for MCCB, 3 Pole, 160 Amps complete all as specified and as directed.Note: - Distribution board and MCBs should be of same make. |
| 141 | Supply and fixing in replacement MCCB 3 pole, 415 Volt fixed thermal and fixed magnetic setting of capacity 160 Amps 25 KA complete all as specified and as directed by Engineer-in-Charge. |
| 142 | Taking down ceiling fan of any sweep, keeping it in safe custody and supply and fixing ceiling fan 1200mm sweep BLDC suitable for working on fan regulator complete all as specified and as directed by Engineer-in-Charge.Note: - Contractor will deposit the old unserviceable ceiling fan to MES store for their further action. |
| 143 | Taking down Desert cooler of any type and depositing to MES store and Supply and fixing Desert Cooler, Iron Body, electric driven (Single Phase) having nominal Air Flow capacity of 5000 Cum Per Hour complete all as specified and as directed. |
| 144 | Taking down Exhaust Fan of any sweep, Keeping in safe custody and supply and fixing Exhaust fan 300 mm PVC body including necessary connection with 1.5 Sqmm copper conductor with ceiling rose, along with cutting of hole of suitable size with PCC works and making good to disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.Note: - Contractor will deposit old unserviceable exhaust fan to MES store for their further action. |
| 145 | Surface mounted LED downlighter 1 x 12 W warm white made up of extruded aluminium housing and high power LED as a light source with clear diffuser and separate electronic driver complete all as specified and as directed. |
| 146 | Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm burried directly in ground (earth pit not less than 2.25 mtr below normal ground level) connected to galvanized earth lead strip of size 32 mm x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 40 mm dia medium grade GI tubing for protection of earth lead, mild steel sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 cm compacted thickness all around the electrode with concrete earth pit of PCC (1:3:6) type C-1, 50 mm thick precast RCC (1:2:4) type B-1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation, earth work, in soft/ loose soil and disposal of soils to a disance not exceeding 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 of SSR Partt-I complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender