Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58281088

Tender For Provn Of 01 Bathroom Complex Near Bldg No P-14/15/17 And Certain Other Works At Bareilly.

Issued by Statutory Bodies & Commissions/Committees · Bareilly, Uttar Pradesh
Tender Value
46.31 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
93000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of 01 Bathroom Complex Near Bldg No P-14/15/17 And Certain Other Works At Bareilly.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 19-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 26-Nov-2026

BOQ

Name of Work:- Provn of 01 bathroom complex near bldg no P-14/15/17 and certain other works at Bareilly.
Sl. No. Item Description
1Surface excavation in soft/loose soil n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified & directed.
2Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, in soft/loose soil and getting out complete all as specified & directed.
3M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.
4S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.
5S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified.
6M&L Formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.
7M&L Formwork to sides of pillars, posts, struts, piers, columns complete all as specified and directed.
8M & L formwork to sides and soffits of lintels,lintel bend, roof beams etc finished rough surfaces of concrete complete all as specified.
9M&L Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.
10M&L RCC M-25 using 20 mm graded stone aggregate as in foundation, footing, plinth beam, base of columns etc all as specified and directed.
11M&L RCC M-25 using 20 mm graded stone aggregate as in columns, pillars, piers, post and structs etc all as specified and directed.
12M&L RCC M-25 using 20 mm graded stone aggregate as in roof Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified and directed.
13M&L RCC M-25 using 20 mm stone graded aggregate as in slab, shelves etc.all as specified and directed.
14Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified.
15Removing excavated soil exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.50m above the starting point complete.
16M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.
17M & L hardcore of broken stone or boulders of gauge n.exc.63mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface. complete all as specified & directed.
18M & L 75mm th PCC 1:3:6 type C-2(using 40 mm stone aggregate) as in sub base, Floors, Paving, plinth protection, finished even and fair complete all as specified.
19M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.
20S&F Factory made PVC single door frame of size 50mmx47mm with a wall thickness of 5mm plain colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 150 of SSR 2004 part-II. The door frame to be fixed to the wall using MS screw 75mm long with PVC fastener complete as per manufacturing, instruction and as specified.
21S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
22S&F stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.
23S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.
24S&F 150 mm size aluminium handles, cast type anodised completed all as specified and directed.
25S&F steel ventilators fixed type with glazing bars complete all as specified and directed.
26M & L sheet glass ordinary quality 4mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified.
27M&L Fly ash brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified.
28M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built inmortar 1:6, complete all as specified.
29M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.
30M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)
31M & L rendering 5mm thick on ceiling in cement mortar 1:4 finished fair and even smooth without using extra cement complete all as specified.
32Supply only water proofing compound complete all as specified & directed.
33M&L non skid ceramic coloured tiles 7mm to 8 mm thick (Square/ rectangular ) area of each tile in floors etc.area of each tiles exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including M&L for15 mm thick screed plaster in CM 1:6 complete all as specfied and directed.
34M&L glazed ceremic colour tiles in vertical surfaces 450mmx300mmx7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including M&L for 15 mm thick rendering in CM (1:4) complete all as specfied and directed.
35S&F 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls.complete all as specified & directed.
36S&F for PVC (SWR) bends any radius complete all as specified & directed.
37S&F GI tubing 15mm medium grade with all fitting and fixed complete to walls & ceiling or laid in floors,bore of pipe 15mm dia all as specified
38S&F GI tubing medium grade with all fitting and fixed complete to walls & ceiling or laid in floors,bore of pipe 20mm dia, complete all as specified & directed.
39S&f forPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including. 32mm dia flush pipe of polythelene of low or high density, for low or high level flushingh cistern complete all as specified & directed.
40S&F PVC connections 15mm size with PTMT nuts of length 450mm. complete all as specified & directed.
41S & F for chromium plated stop valves/Angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.
42S & F Vitreous China wash hand basin flat back, including , waste coupling brass,waste pipe, chain and plug and porcelain stopper brackets complete all as specified and directed.
43S&F Vitreous china squatting pan (Orissa pattern) size 580mm x 440 mm, snow white, with integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe of 32mm dia and syphonage pipe etc, complete all as specified & directed.
44S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, waste pipe securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap) complete all as specified & directed.
45S&F fancy type 15 mm bore brass chromium plated WHB for water screwed down for iron pipe and fixed to WHB complete all as specified and directed.
46S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with railing fixed with fancy type screws complete all as specified and directed.
47S&F 15mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
48S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges including brackets complete all as specified.
49S&F 450mmx600mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed
50M&L CI floor trap 75mm with grating incluing jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
51S&F Rotational moulded polyethylene water storage tanks(tripple layer and white in colour) of 500 Litre capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.
52S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed
53S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm complete all as specified and directed.
54M&L salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing complete all as specified & directed.
55M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWG pipe complete all as specified & directed.
56Cutting into existing manholes for concrecting new drains making good to pipe and rendering, cutting out existing benching for and forming brach channel (1/2 Round or 3/4 Section) in cement concrete 1:2:4 type B-1(20 mm graded stone aggregate) smooth finished and reformed bending as required internal dia of pipe 150mm complete all as specified and directed
57Material and labour for preparation of new plastered or pointed surface of walls/pillars/cornices by brooming down or by sand papering or by any other mean and after preparing the surfaces applying two coats of cement base paint as approved tint/colour complete all as specified.
58M&L for applying two coats of oil bound distempering over one coat priming (chalk whitening) on new plastered surfaces,including preparing surface, complete all as specified and directed by Engineer-in-Charge
59Material and labour for preparation of new plastered or pointed surface of ceiling by brooming down or by sand papering or by any other mean and after preparing the surfaces applying three coat of white wash as approved tint/colour complete all as specified.
60Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
61Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :- (a) Prepartion of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture'\\"s specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed. (c) applying a coat of Aluminium paint @ 0.20 Litres per Sqm complete as per manufacturer's instructions.
62Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- (a) All as per item No 64, here in before but for One light / fan/ exhaust fan point controlled by one switch.
63(b) All as per item No 64, here in before but for One 5 pin 5 Amp socket out let point controlled by one switch on same board.
64All as per item No 64, here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified.
65S & F Modular switch one way 6 A, 1 Module complete all as specified and directed by the Engr-in-Charge.
66S & F Modular switch one way 16 A, 1 Module complete all as specified and directed by the Engr-in-Charge.
67S & F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge.
68Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.
69S&F New LED Batten(4 ft) with aluminum extruded channel(housing) and polycarbonate diffuuser for glare free light with input power 20 Watt , system efficiancy not less than 120 lm/watt with built in surge protection not less than 2.0 KV with acessories like both side end cap, driver, holder,screw including LED light with three core flexible sheathed copper conductor cable of suitable size to connect with ceiling rose complete all as directed
70S&F electric water heater storage type ABS outer body and glass line coated inner tank suitable to withstand 8 bar pressure and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with LED temp Indicator and integrated shock safe plug complete with all accessories such as safety valve, thermostate, NRV, Fixing bolts, stainless steel braided connection piece 450 mm long etc as specified.
71Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.
72S&F MCB SPN 16- 32 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.
73S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.
74Supply and fix flush sheet metal enclosure SPN DB 6 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete all as specified and directed.
75M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc all as specified and directed .
76Supply, installing, testing and commissioning exhaust fans with louvers, copper winding, PVC body 250 mm sweep, 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc complete all as specified and directed.
77Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm, 2 core.
78M&L for sand cushioning laid in trenches for laying of LT UG cables complete
79M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as spd and directed.
80S&F GI tubes light grade of dia 20 mm with all fitting and fixed complete for protection of LT UG Cables laid to walls or in floors or along with poles etc complete all asspd and directed.
81Supply and laying galvanised iron pipe of medium grade 20 mm bore with ISI marked with all tube fittings (such as bend, elbows,tees,short pieces of medium grade, connectors, back nuts, caps, plugs and unions etc) laying in trenches/floor/ducts and also cutting pipes, screwing and for making forged bends on piping as reuired and complete.
82Supply and fixing Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed completed all as specified and directed.
83M & L for cutting existing steel tubing 50mm bore for alterations or additions for inserting tees complete all as specified and directed.
84S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V , 1200 sweep Min air delivery 210 CFM service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) completed all as specified and directed.
85S&F refrigerator, electric driven(single phase) , capacity 195 Liter, BEE 5 star rated completed all as specified and directed.
86S&F voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed between 170 V to 250 V with output voltage syablized at 230 V with accuracy of +- 2.5 % and of capacity 1 KVA completed all as specified and directed.
87Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58281088
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 46.31 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of 01 Bathroom Complex Near Bldg No P-14/15/17 And Certain Other Works At Bareilly.
Basic Detail
Tender No 8418/C/E8
Bidding Type Tender
Location
City Bareilly
State Uttar Pradesh
Key Dates
Publish Date 19 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 46.31 Lakhs
Tender Fee 500
EMD 93000
Exemption Available
Document List
4e129ffa-35f3-4736-93e1-ae1d60e91fb2.html
BOQ_893186.xls
COMPLETTENDER8418.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 4 days
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

4e129ffa-35f3-4736-93e1-ae1d60e91fb2.html

xls

BOQ_893186.xls

pdf

COMPLETTENDER8418.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender