Tender For Maintenance Of Gantries And Allied Works At Af Stn Utarlai
Tender Value
8 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
9 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Gantries And Allied Works At Af Stn Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | Inspection, periodical check and servicing of EOT cranes 02 Ton (14 Nos), 05 Ton (02 Nos) and HOT cranes (4 Nos) inside the Tech Area during servicing of all the moving parts by lubricating them with suitable lubricants, cleaning of external and internal surfaces and refixing and tightening at existing places.Complete all as directed by Engineer-in-Charge. |
| 2 | Maintenance of installed EOT cranes in reliable, safe and efficient operation condition by carry out planned maintenance of EOT cranes inside the Tech Area by rectifying the defects by replacing the defective parts complete all as directed by Engineer-in-Charge. Note: Required spares for maintenance shall be measured and paid seperately under respective schedule of items as under. Cost of any minor spares required other than specified here in below shall be deemed to have been included in the rate quoted by contractor. |
| 3 | EOT 2 Ton Capacity |
| 4 | EOT 5 Ton Capacity |
| 5 | HOT 2 Ton Capacity |
| 6 | Supply in replacement of wheel bearing for EOT cranes (LT) upto 2.0Ton capacity Make: NBC/SKF |
| 7 | Supply in replacement of wheel bearing for EOT cranes (LT) upto 5.0 Ton capacity Make: NBC/SKF |
| 8 | Supply in replacement of wheel bearing for EOT cranes (CT) upto 2.0 Ton capacity Make: NBC/SKF |
| 9 | Supply in replacement of wheel bearing for EOT cranes (CT) upto 5.0 Ton capacity Make: NBC/SKF |
| 10 | Supply in replacement of carbon bushes for hoist creep motor as per the existing design, suitable for EOT crane upto 5 tonne capacity of existing make |
| 11 | Supply in replacement of MS coupling bolts & nuts as per the existing design and size as directed. |
| 12 | Supply in replacement of steel wire rope 10mm dia for EOT crane existing make |
| 13 | Supply in replacement of steel wire rope 12mm dia for EOT crane existing make |
| 14 | Supply in refilling of grease including cleaning of old grease complete all as specified and directed. |
| 15 | Supply in filling of gear oil SP 320 for top up upto to required level or in replacement of U/s oil complete all as specified and directed. |
| 16 | Supply in replacement of gear wheel shaft for crane upto 2.0 Ton capacity, taking down, servicing of gear box, greasing etc and refixing of crane with proper alignment etc, including testing on completion, complete all as directed by Engineer-in-Charge. |
| 17 | Supply in replacement of gear wheel shaft for crane upto 5.0 Ton capacity, taking down, servicing of gear box, greasing etc and refixing of crane with proper alignment etc, including testing on completion, complete all as directed by Engineer-in-Charge. |
| 18 | Taking down old unsv gears, pinion, warm gear etc and Supply and fixing new gears, pinion, warm gear, oil seals, packings etc of the cranes suitable for 2 Ton capacity including all other accessories, fixtures, nut, bolts & washers as required for fixing gears, gear oil (Gear oil 320) complete all as specified and directed. (Note :- Gear oil will be measured and paid for seperately under relevent item of BOQ. |
| 19 | Supply in replacement of brake shoe suitable for 2 Ton capacity EOT as per existing make, model and sizes complete all as specified and directed. Note :- All brake shoe of complete 2 Ton EOT will be changed in this item |
| 20 | Supply in replacement of brake shoe suitable for 5 Ton capacity EOT as per existing make, model and sizes complete all as specified and directed. Note :- All brake shoe of complete 5 Ton EOT will be changed in this item |
| 21 | Supply in filling of Transformer oil for top up in hydraulic brakes of EOTs complete all as specified and directed. |
| 22 | Supply in replacement of padestal including padestal bearing of size 32mm complete all as specified and directed. |
| 23 | Supply in replacement of padestal including padestal bearing of size 35mm complete all as specified and directed. |
| 24 | S& F in replacement of power contactor of capacity 25 Amp, 3 pole suitable for EOT crane 2 Tonne capacity. |
| 25 | S& F in replacement of power contactor of capacity 40 Amp, 3 pole suitable for EOT crane 5Tonne capacity. |
| 26 | S& F in replacement of thermal over load relay upto 14.5 Amp capacity. |
| 27 | S& F in replacement of DSL collectors of 16 Amp capacity for EOT cranes of existing make |
| 28 | S& F in replacement of DSL collectors of 32 Amp capacity for EOT cranes of existing make |
| 29 | S& F in replacement of HRC fuses of 6-15 Amp capacity for EOT cranes. Make: Siemens/L&T/Schneider |
| 30 | S& F in replacement of PVC sheathed multistranded flexible copper cable of 3 core 4.0 sqmm 1100 volt grade for EOT crane. |
| 31 | S& F in replacement of PVC sheathed multistranded flexible copper cable of 3 core 6.0 sqmm 1100 volt grade for EOT crane. |
| 32 | S& F in replacement of PVC sheathed multistranded flexible copper cable of 3 core 10.0 sqmm 1100 volt grade for EOT crane. |
| 33 | S & F replacement of electrical pendent push buttons with NO/NC contacts elements for EOT cranes of any capacity |
| 34 | M&L for testing of alignment of EOT crane tracks (rails) both sides by putting / adding additional material (filling) by gas cutting & welding the same and making them smooth by grinding for smooth functioning of crane complete all as specified and directed. |
| 35 | M&L for rectification of oil leaking from LT gear box of EOT crane by replacing spares such as oil seals etc for EOT crane, complete all as specified. |
| 36 | M&L for dismantling motors upto 1.5 KW capacity from EOT crane taking down and carry to workshop, rewinding with existing guage of super enamelled copper winding wire of superior quality with proper insulation and bringing back and refixing on crane with proper alignment with gear box etc, including testing on completion, complete all as directed by Engineer-in-Charge. |
| 37 | Description all as per serial item No. 33 here in before but for motors above 2KW to 3.5KW capacity, complete all as directed by Engineer-in-Charge |
| 38 | M&L for dismantling electric magnetic brake coil from crane of any capacity, taking down and carry to work shop, rewinding with existing guage of super enamelled copper winding wire of superior quality with proper insulation and bringing back and refixing on crane with proper alignment with gear box etc, including testing on completion, complete all as directed by Engineer-in-Charge. |
| 39 | S& F in replacement of limit switch for EOT cranes of any type capacity and existing make complete all as specified and directed. |
| 40 | S & F Iron cable carrier (Rollers) complete all as specified and directed. |
| 41 | S&F remote control unit plastic body suitable for 2 Ton EOT as per existing make and model complete all as specified and directed. |
| 42 | S&F remote control unit Cast iron body suitable for 2 Ton EOT as per existing make and model complete all as specified and directed. |
| 43 | S & F in replacement of single phase preventor as per existing make and model complete all as specified and directed. |
| 44 | S & F in replacement of phase sequence corrector as per existing make and model complete all as specified and directed. |
| 45 | Carrying out load test for each crane once in eleven month on EOT 02 Ton / 05 Ton and HOT cranes inside the Tech Area under 100% load capacity of cranes on hoisting, long travel and cross travel for checking the performance including deflection test with necessary manpower /instruments/necessary internal transportation upto required cranes, complete all as directed by Engineer-in-Charge as under :- Note:(i) Load will be provided at site by the User (Air Force) as to ensure smooth/safe and efficient operation. |
| 46 | EOT 2 Ton Capacity |
| 47 | EOT 5 Ton Capacity |
| 48 | HOT 2 Ton Capacity Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender