Tender For Repair/Maint Of Misc Fur Of Otm Accn At Naval Station Karanja.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
2 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Misc Fur Of Otm Accn At Naval Station Karanja.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE KARANJA NAME OF WORK: Repair/Maint of Misc Fur of OTM accn at Naval Station Karanja. CONTRACT AGREEMENT No: CWE KJ(K)- OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | SOFA SET 5 SEATER FULLY UPHOLSTERED ,(3+1+1) TP |
| 3 | Removing of old unserviceable rexin/Tapestry cloth of sofa set 5 seater(1 x pices,size of 3 seater approx- width x 1800,depth x 835, height-730 mm and single seater 650 x 835 x 730 mm) and supply and fixing new Synthetic rexin/composite rexine/leatherette of Best quality with plush foam seating and whenewhere required and as per exsting pattern and approved by Engr - in - charge and cost of rexine/Tapestry shall not be less than Rs 650/- Per mtr.( cost includes all other work like stiching and patches filling with good quality of racron filler and other req material solution/staple pins and for req work ) Drg No TP, |
| 4 | Removing & supply and fixing new 3\\" steel leg shall be made of all as specified as per existing pattern and directed by Engr - In - Charge. |
| 5 | Removing & supply and fixing of new black malmal /cora cloth below sofa set all as per existing pattern and directed by Engr - In - Charge |
| 6 | Removing dust,dirt with complete Cleaning of Sofa set Tapestry by best and suitble use of chemical solution. |
| 7 | Board Notice, Fd-99,117 |
| 8 | Removing & supply and fixing new back side Soft Board along with Green Blaze Cloth. all as specified in drng,as per existing pattern and directed by Engr - In - Charge. |
| 9 | Removing & supply and fixing of New Glass Shutter along with frame with Hatch & Staple. all as per existing pattern and directed by Engr - In - Charge. |
| 10 | CHAIR EASY STEEL CUSHIONED FD-121M |
| 11 | Removing the old unserviceable and S & F of new 75 mm thick cushion for seat with approved shade of Rexin from Eng-In-Charge.Make of Foam 40 density-Kurlon/Sleepwell/U-foam |
| 12 | Removing the old unserviceable and S & F of new 75 mm thick cushion for back with approved shade of Rexin from Eng-In-Charge.Make of Foam 40 density-Kurlon/Sleepwell/U-foam |
| 13 | Painting of entire chair by two coat of synthetic enamel paint |
| 14 | Repairs to chair computers with arms/Revolving or Computerchair adjustable with gas lift/Chair Exexutive. TP |
| 15 | Replacement of old unserviceable castors wheel,Supply and Fixing new castor wheel of diffrent types as per Existing patttern & requirement as approved by Engr-in-charge. |
| 16 | Fixing/tightening/welding and greasing of Chaire Computer wherever required and painting with synthetic enamel paint of required shade. |
| 17 | Removing of old tappestry cloth & Cora black cloth and S & F new tapestry cloth/rexine and Cora Black cloth (Tapestry and cora cloth of approved quality and shade) alongwith seat and back of chair computer. Unit rates includes PVC lipping around & new plastic cover(Panni) agaist dust/dirt to seat n back after change tapestry work (Note: The rate of tapestrey cloth/rexine shall no be less than Rs 300 per mtr ad will be approved by Eng-In-Charge.) |
| 18 | Removing of old unserviceable handle and S & F new Handle of Black integral skin polyurethene Re inforced with MS Insert.It shall be scratch and whether Resistance handle of as per exsting patter or directed by Engineer in Charge |
| 19 | Removing of old unserviceable Hydrulic /Gas Pump Mechanism & supply and fixing new one with PVC Cup around fixing between prong and MS tilting frame,It shall consist of drop and provide lift mechanisim and shall be adjusted in the range of 65 mm and can be locked in 5 steps for better lumber support. |
| 20 | Removing of complete old unserviceable MS Tilting Frame/Mechanism for combination lever to adjust chair height and lock rocking, fitted to seat and back & supply and fixing new one as per existing pattern or as directed by Eng-In-charge |
| 21 | Removing of old unserviceable and S & F new Nylon 'A' 10.5 mm dia forged bright zinc plated MS Castor pin/Chrome base heavu duty is a press fitted in to each prong for holding the castors. It shuld be minimum 600 mm pitch centre dia. |
| 22 | AUDITORIUM CHAIR, TP, MODEL-VTO 300 |
| 23 | Removing of old unservicible Tapestry cloth from the Auditorium chair and supply and fixing of new cloth not less than Rs 300 /- per metre. white long cloth shall be provided for the cushion before fixing new tapestry cloth. Tapesrty cloth shade/colour shall be as approved by GE |
| 24 | Painting to existing MS portion of chair with two coat of synthetic enamel paint over coat of red oxide/zinc chrome primer including removel of existiong old paint. MELAMINE Polishing of exposed wooden surface. |
| 25 | Servicing of Auditorium chair incuding tighting of chair,oiling & welding to spring as per requirment and other moving parts of chair. |
| 26 | Removing dust,dirt with complete Cleaning Tapestry of Auditorium chair by best and suitble chemical solution. |
| 27 | S & F 50 mm new Heatlon foam to Seat & back prior to change of Tapestry of Chair Auditorium. |
| 28 | Removing old, S&F of new Tip up spring and slider unit mechanism complete as per existing pattern and as directed by Eng-In-Charge.. |
| 29 | Bench with cushion Seat and Back (1070x300x 900mm ) TP |
| 30 | Removing the old unserviceable and S & F of new 75 mm thick cushion for seat with approved shade of Rexin from Enf-In-Charge.Make of Foam 40 density-Kurlon/Sleepwell/U-foam |
| 31 | Removing the old unserviceable and S & F of new 75 mm thick cushion for back with approved shade of Rexin from Enf-In-Charge.Make of Foam 40 density-Kurlon/Sleepwell/U-foam |
| 32 | Painting of entire chair bt two coat of synthetic enamel paint |
| 33 | Charpoy IP Foldiing with Hardtop Fd-388 |
| 34 | Removing of unserviceable plywood and Supply and fixing new 12 mm plywood BWR Grade 1 commercial IS 303 to charpoy GI pipe by means req size of nuts and bolts/screws, playwood size all as shown on drg FD 220. |
| 35 | Spray Painting to Charpoy IP Hardtop |
| 36 | CHAIR FOR VISITOR, TP |
| 37 | Replacement of old unserviceable arms with new black integral skin polyuretheane with 75-85 shore 'A' hardness and reinforced with MS Insert both hand rest sections to have slope towards front as per trades patttern. as per exsting patter oe directed by Engineer in Charge |
| 38 | Removing the old unserviceable MS Pata Frame fitted between seat & back and Supply and Fixing the new one all as per exsting pattern or directed by Eng-In-charge. as per exsting patter oe directed by Engineer in Charge |
| 39 | Removing the old unserviceable seat n back and Supply and Fixing the new seat and back with panni for dust protection , polyurethane foam shall be moduled with density 50 -55 kg per cubic meter thick and hardness 20 +/-2 kg on hampden machine and moduled polyrethane foam with PVC lipping all around as per drawing. as per exsting patter oe directed by Engineer in Charge |
| 40 | CHARPOY GI PIPE W/PLY TOP FD 220 |
| 41 | Removing of old unservicable Clit/MS Square tube & Supply and fixing MS flat of 35 mm in width x 5mm in Thackness along the width of charpoy in 2 Nos duly welded with frame as support to plywood with hole and fixed with required size nuts & bolts.max no 2 Nos per one charpay .all as specified as per existing pattern and directed by Engr - In - Charge. |
| 42 | Removing of unserviceable plywood and Supply and fixing new 12 mm plywood BWR Grade 1 commercial IS 303 to charpoy GI pipe by means req size of nuts and bolts/screws, playwood size all as shown on drg FD 220. Make- Kitply / century/Anchor/Archid |
| 43 | Stool woodn top 30 cm dia with cushon cotton padling 20'' high TP |
| 44 | Removing the old unsv top and S&F new Top with rexin cover made out of 30 cm dia in round shape, cushion 75 mm thick , 40 Density as per existing pattern and directed by Eng-In-Charge. |
| 45 | Polishing to stool with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. |
| 46 | Table Dining for Ors with Aluminium Top FD-165(M) |
| 47 | Removing the old unsv top and S&F new top made out of 19 mm Block Board with 22 Guage Aluminium Sheet on Top as per drawing and directed by Eng-In-Charge. |
| 48 | Removing existing unserviceable MS Square tube of table dining steel 900x900x760 mm and welding the frame by providing new MS Square tube of size 25 mm x 25 mm 16 gauge (Complete all as directed by Engr-in - charge) |
| 49 | TABLE OFFICE WRITING TUBULAR FORMICA TOP(1370X760X760 )MM, TP |
| 50 | Removing old, S&F new Top of size 1370 mm x 760 mm made out of 18 mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood. |
| 51 | Painting to Tablel with approved grade and brand after cleaning,dusting and scratching the entire steel surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. |
| 52 | ALMIRAH STEEL LARGE WITH SELVES DNC-505(TP) OR 1/2 S 1/2 H:-FD-67/1031/1033 |
| 53 | Removing of old unserviceable MS clamps/ Bracket and supply & fixing of new MS clamps/ Bracket with nut bolts or welding as per give in drawing and site requirement complete all as specified on Drng and directed by Engr -In -Charge. |
| 54 | Removing of old unserviceable lock and supply & fixing of new 6 lever lock with duplicate keys, by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by GE/Engr -In -Charge. Make:link /Godrej/Standard/Aligarh or Equvalent approved by GE/EIC |
| 55 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge. |
| 56 | Removing and Denting work to shutter and Re- Fixing with MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge. |
| 57 | Removing unserviceable leg and providing new leg made out of 1 mm thick MS black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting and welding to almirah large steel with shelves |
| 58 | Removing of old unserviceable Hatch & Staple and supply & fixing of new Hatch & Staple, by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by GE/Engr -In -Charge. |
| 59 | ALMIRAH MEDIUM STEEL WITH SHELVES:-FD-1032 |
| 60 | Removing of old unserviceable MS clamps/bracket and supply & fixing of new MS clamps/bracket with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. |
| 61 | Removing of old unserviceable lock and supply & fixing of new 6 lever lock with duplicate keys, by nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr -In -Charge. Make:link /Godrej/Standard/Aligarh or Equvalent approved by GE/Eng-In-Charge |
| 62 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge. |
| 63 | Removing of old unserviceable MS shelve, supply & fixing of new MS shelve made to shape out of 1mm thick MS sheet fixing by bolts or welding, MS black sheet duly painted with two coats of synthetic enamel paint per given in drawing and site requirement complete all as specified and directed by Engr -In - Charge. Paint Make-Asian/Delux/Nerolac/Berger |
| 64 | Removing and Denting work to shutter and Re- Fixing with MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed by Engr - In - Charge. |
| 65 | Removing unserviceable leg and providing new leg made out of 1 mm thick MS black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting and welding to almirah Med steel with shelves . |
| 66 | Cot Double Tier Steel with Newar ( 6x3 feet ) |
| 67 | Removing of old unservicable Clit/MS Square tube & Supply and fixing MS flat of 35 mm in width x 5mm in Thackness along the width of charpoy in 2 Nos duly welded with frame as support to plywood with hole and fixed with required size nuts & bolts.max no 2 Nos per one charpay .all as specified as per existing pattern and directed by Engr - In - Charge. |
| 68 | Removing of unserviceable plywood and Supply and fixing new 12 mm ply BWR Grade 1 commercial IS 303 to charpoy GI pipe by means req size of nuts and bolts/screws, playwood size all as shown on drg FD 220. Make- Kitply (Vista)/ century(Club)Anchor/Archid (Gold) |
| 69 | M&L derusting, denting of de-shaped portion and applying two coat of synthetic enamle paint (Spray painting) incl preparation of surface all as directed by EIC for the following.The Work will be executed at various Units locations/Residential accn area as per user requirmrnt. Paint Make- Aisian/Shalimar/Burger/Delux |
| 70 | ALMIRAH LARGE STEEL WITH SHELVES OR 1/2 S 1/2 H,FD-67/1031/1033 |
| 71 | ALMIRAH MEDIUM STEEL WITH SHELVES, FD-1032 |
| 72 | Locker steel 6 units FD-1038/127 |
| 73 | Chair CB tubler Steel W/Arms Fd 75 (M) |
| 74 | Chair CB tubler Steel w/o Arms Fd 75 (M) |
| 75 | Table steel 900X600x760mm |
| 76 | TABLE DINING STEEL 900 X 900 X760 MM , FD-1009 |
| 77 | TABLE OFFICE STEEL (CLERK/STEEL) FD-84/1003 |
| 78 | TABLE OFFICE STEEL (OFFICER/STEEL) FD-84/1004 |
| 79 | Chair School with Hand Rest , FD/E6/Map/05 |
| 80 | Book shelf open small and large |
| 81 | Book case steel Fd-1047 |
| 82 | Cabinet filing steel 4 drawer size 1384mm x 700mm x 470 mm |
| 83 | Form without back steel Fd-67 |
| 84 | Rack adjustable steel |
| 85 | Table 3x2 Steel Fd-1007/1008 |
| 86 | Rack steel 4 shelves 975mm x 900mm x 300mm |
| 87 | Rack steel slotted angles 6/7 tier 1910 mm x 900mm x 300mm with shelves |
| 88 | Rack adjustable steel 8/9 shelves angle of size 2090mm x 900mm x 600 mm |
| 89 | Stool 2' hight/Stool Adjustible Steel , FD 81/103/119/409 |
| 90 | Locker steel 18 units 1980mm x 910mm x 480mm |
| 91 | Chair folding Steel, FD-123 |
| 92 | Chaire Easy Steel Seat & Back Cushion Fd-121 |
| 93 | Locker Steel FD-1029 |
| 94 | The wood components shall be rubbed with apropriate size sand paper along the grains to remove any dust/ wax/unwanted stains from the surface. Any cracks or holes shall be filled with suitable wood filler of good quality approved by Engr -In - Charge. Two to three coats of French Polish of best quality shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required as directed by Engg-In-Charge. Polishing to the following wooden furniture items will be also carried out in Officer /Jco/Ors Qtrs and unit lines location :- |
| 95 | Chair dining, Fd -16/228/279 |
| 96 | Chair Easy Fd - 229 |
| 97 | Chair writing, Fd - 20/250/280 |
| 98 | Notice bd |
| 99 | Almirah Med w/s , DB 3954 |
| 100 | Almirah Large W/S |
| 101 | Sofa Set 5 Seater |
| 102 | Table Dining 6 pers |
| 103 | Table Dining 8 pers |
| 104 | Display Board 1220x 1220mm |
| 105 | Hat stand W/M |
| 106 | Locker Bed side P |
| 107 | Peg Table |
| 108 | Table dining 4 persons/Ors, 1200 mm X 900 mm X 760 mm |
| 109 | Table office clerk wooden |
| 110 | Stool Wooden woth cushion top |
| 111 | Table 3x2 with drawer |
| 112 | Stool wooden 2 feet |
| 113 | Double Desk for 2 chairs |
| 114 | Bench Wooden Fd-13 |
| 115 | Work Bench F-43 |
| 116 | Rack Pigeon Hole large wooden |
| 117 | Rack Rifles Wooden for 4 Rifle KF-57 |
| 118 | Rack side 03 Space Wooden |
| 119 | Bench Work Shop 9x 4x3 with 4 dvr F-96 |
| 120 | Rack Wooden 12 x6 2 KF-12 |
| 121 | Rack Wooden 12 Cubices KF-70 |
| 122 | Rack Wooden for Carbines MP-5 for 10 Carbines KF-60 |
| 123 | Rack Pigeon Hole large wooden |
| 124 | The wood components shall be rubbed with apropriate size sand paper along the grains to remove any dust/ wax/unwanted stains from the surface. Any cracks or holes shall be filled with suitable wood filler of good quality approved by Engr -In - Charge. Two to three coats of Melamine Polish of best quality shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required as directed by Engg-In-Charge. Polishing to the following wooden furniture items will be also carried out in unit lines location :- |
| 125 | Table Confernce 2135x1065x750mm FD-08 Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender