Tender For Repair To Chajja, Roof Projection, Facia Plinth Protection, Plastering Incl External Painting To Single Living Billets And Other Otm Accn In Domestic Area At Air Force Station Utarlai
Tender Value
30 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
13 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Chajja, Roof Projection, Facia Plinth Protection, Plastering Incl External Painting To Single Living Billets And Other Otm Accn In Domestic Area At Air Force Station Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | M& L for chipping of slab/columns/beams/chajjas/parapet/roof projection and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying Fosroc Reebaklens RR rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Fosroc Nitozinc primer or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: Reebaklens RR rust rust remover, Nitozinc primer of Fosroc or equivalent in Dr Fixit/ACC/L&T/STP/Sika India /Asian paints/bostik/Choksey chemicals/Thermax limited/ Hindcon Chemicals . (Note : The work shall be carried out upto 12.00M height and through approved company authorised applicator) |
| 2 | M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik/Sika/Choksey chemicals/Thermax ltd/ CICO as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc including taking down existing plaster/any type of treatment including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete as per specification and as directed. MAKE: Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik /Sika India/ Choksey chemicals/Thermax ltd/ BASF/Asian paints/Hindcon Chemicals. Complete all as specified and directed by Engineer-in-Charge. Note : The work shall be carried out through approved company authorised applicator and upto 12m height. |
| 3 | M&L TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.0M height) |
| 4 | M&L driiling holes with 10 mm to 20mm dia and 75 to 100mm deep as required and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with two component polyester resin anchoring grout (two pack system consist of 1 part of resin and 2 hardner part) hole with Fosroc Lokfix E55 S / E45T @ 150gm per holes with all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. Make: Fosroc Lokfix E55 S / E45T or equivalent in Dr Fixit/STP/Seika/ bostik/Choksey chemicals/ Thermax ltd / BASF/Asian paints/Hindcon Chemicals/Hilti . Note : 1.reinforcement shall be paid and measured separately. 2. The work shall be carried out through approved company authorised applicator & upto 12m height. |
| 5 | M & L for perparation the surface and applying 40mm thick in layers ,each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/ parapet /roof projection/balcony/staircase with Fosroc Renderoc SP40 or equivalent in Dr Fixit/STP/Asian paints / Sika / Bostik/CICO/Choksey chemicals/ Thermax ltd/Hindcon chemicals including all necessary scaffolding, man and material Complete all as specified and directed by Engineer-in-Charge. . Note : The work shall be carried out through approved company authorised applicator & upto 12m height. |
| 6 | M & L for 10mm thick cement plaster CM 1:3 with added intigral waterproofing compound including preparation on new plaster surface & applying two coat of cement base paint over one coat of primer. Fosroc Conplast WL Extra or equivalent in Dr Fixit/ACC/ L&T/STP/Bostik/Sika/ CICO/Choksey chemicals/ Thermax ltd as per manufacturer instruction including all scaffolding ,machinery,tools tackels and men materials and clearing of debries. Note : The work shall be carried out through approved company authorised applicator and upto 12.0M height Complete all as specified and directed by Engineer-in-Charge. . (WPC will be measured & paid seperately) |
| 7 | M&L preparation of old distempered wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying a coat of distemper oil emulsion any tinted over one coat of wall care putty. Complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for preparation on old plaster surface of ceiling & applying one coat of white wash up to 12 mtr height of bldg. Complete as specified and directed by Engr-in-charge. |
| 9 | M&L for preparation on old plaster surface of walls & applying one coat of cement base paint up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge. |
| 10 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, Complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, Complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for complete removal of existing treatment any type & any description and applying one coat of Weather Coat Paint (APEX) @ 0.83 Ltr/10 Sqm over one coat primer @ 2.20 Kg/10 Sqm of any colour up to 12 mtr height of bldg incl necessaty scaffolding Complete all as specified and directed by Engineer-in-Charge. |
| 13 | Demolition of un-reinforced cement concrete in ground floors or pavings n. exc. 15 cm thick (below or above ground level) Complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for 40 mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate finished even and smooth with using extra cement complete all as specified and as directed by Engr-in-charge. |
| 15 | M&L glass dividing strips, 3mm thick , width of strip 38mm and inserted in position to conform to design, Complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection in bitumen filler/mastic filling Complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete including Demolition of brick work or stone masonry, built in cement mortar. |
| 18 | Taking down cement plaster of any description on bricks, concrete or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 19 | M/L rendering 15mm thick on concrete surface or brick work in CM 1:6 finished even and smooth with out using extra cement similar work up to 12 mtr height of the bldg. Complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for rendering 10mm thick in CM (1:6) on walls, finishing even and smooth without using extra cement similar work . Complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for rendering 5mm thick in CM (1:4) on concrete surface such as roof projection, chajja, fin and similar work up to 12 mtr height of the bldg, finishing even and smooth without using extra Complete all as specified and directed by Engineer-in-Charge. |
| 22 | Prepration on new plastered or unplastered wall surface and applying two coat of oil bound distemper over one coat of alkali resisteant primer, incl and over two coat of wall care putty. complete all as specified & directed by Engineer-in-Charge |
| 23 | M&L for preparation of new plastered surface and applying two coats of Weather Coat Paint (APEX) @ 1.67 Ltr/10 Sqm over one coat primer @ 2.20 Kg/10 Sqm of any colour up to 12 mtr height of the bldg. complete all as specified & directed by Engineer-in-Charge |
| 24 | Prepration on new plastered or unplastered ceiling surface and applying two coat of white wash over one coat of white cement primer up to 12 mtr height of the bldg. complete all as specified & directed by Engineer-in-Charge |
| 25 | M&L for existing plastered/unplaster surface of wall and applying one coat of Water proofing paint Newcoat grade-603 (As per manufacturing instruction)complete all as specified & directed by Engineer-in-Charge Make: Dr Fixit or equivalent . |
| 26 | Hacking out old broken glass from metal frame, including cleaning and removing old putty clip etc and S&F of sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane up to G+2 height bldg. complete all as specified and as directed by Engr-in-charge. |
| 27 | M&L in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and awerage width of aperture 1.18 mm and fixed with tinned tacks. complete all as specified and as directed by Engr-in-charge |
| 28 | Demolition and beaking up drain AC pipes/PVC pipe set in cement mortar up to 110 mm dia. Complete as specified and directed by Engr-in-charge. |
| 29 | S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall. Complete as specified and directed by Engr-in-charge. |
| 30 | S&F 110 mm PVC (SWR) bends any redius with access door. Complete as specified and directed by Engr-in-charge. |
| 31 | S&F 110 mm PVC (SWR)couplers for pvc pipe and similar work. Complete as specified and directed by Engr-in-charge. |
| 32 | S&F 75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall. |
| 33 | S&F 75 mm PVC (SWR) bends any redius with access door. Complete as specified and directed by Engr-in-charge. |
| 34 | Dismantling of plain or corrugated steel sheeting any gauge, thickness incl nainital or simlar patttern roof coverings. Complete all as secified and directed by Engr-In-chage. |
| 35 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding top wall, fixed with self tapping screws, Complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation/plain sheet with necessaty side lap fixed with coach screw and washer for roof, wall and similr work. Complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender